@@ -863,6 +863,76 @@
#thermal-sensor-cells = <1>;
};
+
+ dss: dss@58000000 {
+ compatible = "ti,omap5-dss";
+ reg = <0x58000000 0x80>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@58001000 {
+ compatible = "ti,omap5-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ };
+
+ rfbi: encoder@58002000 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0x58002000 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ clocks = <&dss_dss_clk>, <&dss_l3_iclk>;
+ clock-names = "fck", "ick";
+ };
+
+ dsi1: encoder@58004000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58004000 0x200>,
+ <0x58004200 0x40>,
+ <0x58004300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi1";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ dsi2: encoder@58005000 {
+ compatible = "ti,omap5-dsi";
+ reg = <0x58009000 0x200>,
+ <0x58009200 0x40>,
+ <0x58009300 0x40>;
+ reg-names = "proto", "phy", "pll";
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_dsi2";
+ clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+
+ hdmi: encoder@58060000 {
+ compatible = "ti,omap5-hdmi";
+ reg = <0x58040000 0x400>,
+ <0x58040200 0x80>,
+ <0x58040300 0x80>,
+ <0x58060000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_hdmi";
+ clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+ };
};
};
Add OMAP5 DSS nodes to omap5.dtsi. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap5.dtsi | 70 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+)