deleted file mode 100644
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
@@ -18,6 +18,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip/versatile-fpga.h>
@@ -36,8 +37,6 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <plat/clcd.h>
-
#include "hardware.h"
#include "cm.h"
#include "common.h"
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
@@ -47,7 +48,6 @@
#include <mach/irqs.h>
#include <asm/hardware/timer-sp.h>
-#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "core.h"
@@ -28,6 +28,7 @@
#include <linux/of_platform.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/amba/pl022.h>
@@ -53,7 +54,6 @@
#include <mach/platform.h>
#include <asm/hardware/timer-sp.h>
-#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "core.h"
@@ -8,6 +8,7 @@
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/clkdev.h>
#include <linux/vexpress.h>
#include <linux/irqchip/arm-gic.h>
@@ -29,8 +30,6 @@
#include <mach/motherboard.h>
#include <mach/irqs.h>
-#include <plat/clcd.h>
-
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
.virtual = V2T_PERIPH,
@@ -3,9 +3,6 @@ if PLAT_VERSATILE
config PLAT_VERSATILE_CLOCK
bool
-config PLAT_VERSATILE_CLCD
- bool
-
config PLAT_VERSATILE_LEDS
def_bool y if NEW_LEDS
depends on ARCH_REALVIEW || ARCH_VERSATILE
@@ -1,7 +1,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
-obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
deleted file mode 100644
@@ -1,182 +0,0 @@
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <plat/clcd.h>
-
-static struct clcd_panel vga = {
- .mode = {
- .name = "VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39721,
- .left_margin = 40,
- .right_margin = 24,
- .upper_margin = 32,
- .lower_margin = 11,
- .hsync_len = 96,
- .vsync_len = 2,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
- .bpp = 16,
-};
-
-static struct clcd_panel xvga = {
- .mode = {
- .name = "XVGA",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15748,
- .left_margin = 152,
- .right_margin = 48,
- .upper_margin = 23,
- .lower_margin = 3,
- .hsync_len = 104,
- .vsync_len = 4,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
- .bpp = 16,
-};
-
-/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */
-static struct clcd_panel sanyo_tm38qv67a02a = {
- .mode = {
- .name = "Sanyo TM38QV67A02A",
- .refresh = 116,
- .xres = 320,
- .yres = 240,
- .pixclock = 100000,
- .left_margin = 6,
- .right_margin = 6,
- .upper_margin = 5,
- .lower_margin = 5,
- .hsync_len = 6,
- .vsync_len = 6,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .bpp = 16,
-};
-
-static struct clcd_panel sanyo_2_5_in = {
- .mode = {
- .name = "Sanyo QVGA Portrait",
- .refresh = 116,
- .xres = 240,
- .yres = 320,
- .pixclock = 100000,
- .left_margin = 20,
- .right_margin = 10,
- .upper_margin = 2,
- .lower_margin = 2,
- .hsync_len = 10,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .bpp = 16,
-};
-
-/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */
-static struct clcd_panel epson_l2f50113t00 = {
- .mode = {
- .name = "Epson L2F50113T00",
- .refresh = 390,
- .xres = 176,
- .yres = 220,
- .pixclock = 62500,
- .left_margin = 3,
- .right_margin = 2,
- .upper_margin = 1,
- .lower_margin = 0,
- .hsync_len = 3,
- .vsync_len = 2,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
- .width = -1,
- .height = -1,
- .tim2 = TIM2_BCD | TIM2_IPC,
- .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
- .caps = CLCD_CAP_5551,
- .bpp = 16,
-};
-
-static struct clcd_panel *panels[] = {
- &vga,
- &xvga,
- &sanyo_tm38qv67a02a,
- &sanyo_2_5_in,
- &epson_l2f50113t00,
-};
-
-struct clcd_panel *versatile_clcd_get_panel(const char *name)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(panels); i++)
- if (strcmp(panels[i]->mode.name, name) == 0)
- break;
-
- if (i < ARRAY_SIZE(panels))
- return panels[i];
-
- pr_err("CLCD: couldn't get parameters for panel %s\n", name);
-
- return NULL;
-}
-
-int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
-{
- dma_addr_t dma;
-
- fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
- &dma, GFP_KERNEL);
- if (!fb->fb.screen_base) {
- pr_err("CLCD: unable to map framebuffer\n");
- return -ENOMEM;
- }
-
- fb->fb.fix.smem_start = dma;
- fb->fb.fix.smem_len = framesize;
-
- return 0;
-}
-
-int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
- return dma_mmap_writecombine(&fb->dev->dev, vma,
- fb->fb.screen_base,
- fb->fb.fix.smem_start,
- fb->fb.fix.smem_len);
-}
-
-void versatile_clcd_remove_dma(struct clcd_fb *fb)
-{
- dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
- fb->fb.screen_base, fb->fb.fix.smem_start);
-}
deleted file mode 100644
@@ -1,9 +0,0 @@
-#ifndef PLAT_CLCD_H
-#define PLAT_CLCD_H
-
-struct clcd_panel *versatile_clcd_get_panel(const char *);
-int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
-int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
-void versatile_clcd_remove_dma(struct clcd_fb *);
-
-#endif
@@ -321,6 +321,12 @@ config FB_ARMCLCD
here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
+# Helper logic selected only by the ARM Versatile platform family.
+config PLAT_VERSATILE_CLCD
+ depends on FB_ARMCLCD
+ depends on PLAT_VERSATILE
+ bool
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && ARCH_ACORN
@@ -98,6 +98,7 @@ obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
+obj-$(CONFIG_PLAT_VERSATILE_CLCD) += amba-clcd-versatile.o
obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
new file mode 100644
@@ -0,0 +1,182 @@
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
+
+static struct clcd_panel vga = {
+ .mode = {
+ .name = "VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+ .bpp = 16,
+};
+
+static struct clcd_panel xvga = {
+ .mode = {
+ .name = "XVGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15748,
+ .left_margin = 152,
+ .right_margin = 48,
+ .upper_margin = 23,
+ .lower_margin = 3,
+ .hsync_len = 104,
+ .vsync_len = 4,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+ .bpp = 16,
+};
+
+/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */
+static struct clcd_panel sanyo_tm38qv67a02a = {
+ .mode = {
+ .name = "Sanyo TM38QV67A02A",
+ .refresh = 116,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = 100000,
+ .left_margin = 6,
+ .right_margin = 6,
+ .upper_margin = 5,
+ .lower_margin = 5,
+ .hsync_len = 6,
+ .vsync_len = 6,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .bpp = 16,
+};
+
+static struct clcd_panel sanyo_2_5_in = {
+ .mode = {
+ .name = "Sanyo QVGA Portrait",
+ .refresh = 116,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 100000,
+ .left_margin = 20,
+ .right_margin = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 10,
+ .vsync_len = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .bpp = 16,
+};
+
+/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */
+static struct clcd_panel epson_l2f50113t00 = {
+ .mode = {
+ .name = "Epson L2F50113T00",
+ .refresh = 390,
+ .xres = 176,
+ .yres = 220,
+ .pixclock = 62500,
+ .left_margin = 3,
+ .right_margin = 2,
+ .upper_margin = 1,
+ .lower_margin = 0,
+ .hsync_len = 3,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+ .caps = CLCD_CAP_5551,
+ .bpp = 16,
+};
+
+static struct clcd_panel *panels[] = {
+ &vga,
+ &xvga,
+ &sanyo_tm38qv67a02a,
+ &sanyo_2_5_in,
+ &epson_l2f50113t00,
+};
+
+struct clcd_panel *versatile_clcd_get_panel(const char *name)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(panels); i++)
+ if (strcmp(panels[i]->mode.name, name) == 0)
+ break;
+
+ if (i < ARRAY_SIZE(panels))
+ return panels[i];
+
+ pr_err("CLCD: couldn't get parameters for panel %s\n", name);
+
+ return NULL;
+}
+
+int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
+{
+ dma_addr_t dma;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+ &dma, GFP_KERNEL);
+ if (!fb->fb.screen_base) {
+ pr_err("CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = framesize;
+
+ return 0;
+}
+
+int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base,
+ fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+void versatile_clcd_remove_dma(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
new file mode 100644
@@ -0,0 +1,9 @@
+#ifndef PLAT_CLCD_H
+#define PLAT_CLCD_H
+
+struct clcd_panel *versatile_clcd_get_panel(const char *);
+int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
+int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
+void versatile_clcd_remove_dma(struct clcd_fb *);
+
+#endif
This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final <plat/*> inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-integrator/include/mach/uncompress.h | 48 ------ arch/arm/mach-integrator/integrator_cp.c | 3 +- arch/arm/mach-realview/core.c | 2 +- arch/arm/mach-versatile/core.c | 2 +- arch/arm/mach-vexpress/ct-ca9x4.c | 3 +- arch/arm/plat-versatile/Kconfig | 3 - arch/arm/plat-versatile/Makefile | 1 - arch/arm/plat-versatile/clcd.c | 182 --------------------- arch/arm/plat-versatile/include/plat/clcd.h | 9 - drivers/video/Kconfig | 6 + drivers/video/Makefile | 1 + drivers/video/amba-clcd-versatile.c | 182 +++++++++++++++++++++ include/linux/platform_data/video-clcd-versatile.h | 9 + 13 files changed, 202 insertions(+), 249 deletions(-) delete mode 100644 arch/arm/mach-integrator/include/mach/uncompress.h delete mode 100644 arch/arm/plat-versatile/clcd.c delete mode 100644 arch/arm/plat-versatile/include/plat/clcd.h create mode 100644 drivers/video/amba-clcd-versatile.c create mode 100644 include/linux/platform_data/video-clcd-versatile.h