[RESEND,3/5] fbdev: sa1100fb: make use of device clock

Commit Message

Dmitry Baryshkov Nov. 6, 2014, 7:41 a.m. UTC

Use per-device clock (instead of calling cpufreq_get(0), which can
return 0 if no cpu frequency driver is selected) to program timings.

Signed-off-by: Dmitry Eremin-Solenikov <[e-mail]>
Acked-by: Tomi Valkeinen <[e-mail]>
---
 drivers/video/fbdev/sa1100fb.c | 24 +++++++++++++++++-------
 drivers/video/fbdev/sa1100fb.h |  1 +
 2 files changed, 18 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 580c444e..8933840 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -178,6 +178,7 @@ 
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <video/sa1100fb.h>
 
@@ -413,9 +414,9 @@  sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		var->transp.offset);
 
 #ifdef CONFIG_CPU_FREQ
-	dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n",
+	dev_dbg(fbi->dev, "dma period = %d ps, clock = %ld kHz\n",
 		sa1100fb_display_dma_period(var),
-		cpufreq_get(smp_processor_id()));
+		clk_get_rate(fbi->clk) / 1000);
 #endif
 
 	return 0;
@@ -586,9 +587,10 @@  static struct fb_ops sa1100fb_ops = {
  * Calculate the PCD value from the clock rate (in picoseconds).
  * We take account of the PPCR clock setting.
  */
-static inline unsigned int get_pcd(unsigned int pixclock, unsigned int cpuclock)
+static inline unsigned int get_pcd(struct sa1100fb_info *fbi,
+		unsigned int pixclock)
 {
-	unsigned int pcd = cpuclock / 100;
+	unsigned int pcd = clk_get_rate(fbi->clk) / 100 / 1000;
 
 	pcd *= pixclock;
 	pcd /= 10000000;
@@ -667,7 +669,7 @@  static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 		LCCR2_BegFrmDel(var->upper_margin) +
 		LCCR2_EndFrmDel(var->lower_margin);
 
-	pcd = get_pcd(var->pixclock, cpufreq_get(0));
+	pcd = get_pcd(fbi, var->pixclock);
 	new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 |
 		(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 		(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
@@ -1003,7 +1005,6 @@  sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
 			 void *data)
 {
 	struct sa1100fb_info *fbi = TO_INF(nb, freq_transition);
-	struct cpufreq_freqs *f = data;
 	u_int pcd;
 
 	switch (val) {
@@ -1012,7 +1013,7 @@  sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
 		break;
 
 	case CPUFREQ_POSTCHANGE:
-		pcd = get_pcd(fbi->fb.var.pixclock, f->new);
+		pcd = get_pcd(fbi, fbi->fb.var.pixclock);
 		fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
 		set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
 		break;
@@ -1219,6 +1220,13 @@  static int sa1100fb_probe(struct platform_device *pdev)
 	if (!fbi)
 		goto failed;
 
+	fbi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(fbi->clk)) {
+		ret = PTR_ERR(fbi->clk);
+		fbi->clk = NULL;
+		goto failed;
+	}
+
 	fbi->base = ioremap(res->start, resource_size(res));
 	if (!fbi->base)
 		goto failed;
@@ -1271,6 +1279,8 @@  static int sa1100fb_probe(struct platform_device *pdev)
  failed:
 	if (fbi)
 		iounmap(fbi->base);
+	if (fbi->clk)
+		clk_put(fbi->clk);
 	kfree(fbi);
 	release_mem_region(res->start, resource_size(res));
 	return ret;
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index fc5d429..0139d13 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
@@ -68,6 +68,7 @@  struct sa1100fb_info {
 #endif
 
 	const struct sa1100fb_mach_info *inf;
+	struct clk *clk;
 };
 
 #define TO_INF(ptr,member)	container_of(ptr,struct sa1100fb_info,member)