diff mbox

[v2] fbdev: ssd1307fb: return proper error code if write command fails

Message ID 1421348737-4606-1-git-send-email-prabhakar.csengg@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Prabhakar Jan. 15, 2015, 7:05 p.m. UTC 
From: Prabhakar Lad <prabhakar.csengg@gmail.com>

this patch fixes ssd1307fb_ssd1306_init() function to return
proper error codes in case of failures.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 Changes for v2:
 a: Added new line as per Maxime's suggestion.

 drivers/video/fbdev/ssd1307fb.c | 67 ++++++++++++++++++++++++++++++++---------
 1 file changed, 53 insertions(+), 14 deletions(-)

Comments

Tomi Valkeinen Jan. 30, 2015, 7:40 a.m. UTC | #1 
On 15/01/15 21:05, Lad, Prabhakar wrote:
> From: Prabhakar Lad <prabhakar.csengg@gmail.com>
> 
> this patch fixes ssd1307fb_ssd1306_init() function to return
> proper error codes in case of failures.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> ---
>  Changes for v2:
>  a: Added new line as per Maxime's suggestion.
> 
>  drivers/video/fbdev/ssd1307fb.c | 67 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 53 insertions(+), 14 deletions(-)
> 

Thanks, queued for 3.20.

 Tomi
diff mbox

Patch

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index f4daa59..0ea6345 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -320,7 +320,10 @@  static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 
 	/* Set initial contrast */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x7f);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x7f);
 	if (ret < 0)
 		return ret;
 
@@ -336,63 +339,99 @@  static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par)
 
 	/* Set multiplex ratio value */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
-	ret = ret & ssd1307fb_write_cmd(par->client, par->height - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->height - 1);
 	if (ret < 0)
 		return ret;
 
 	/* set display offset value */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+	if (ret < 0)
+		return ret;
+
 	ret = ssd1307fb_write_cmd(par->client, 0x20);
 	if (ret < 0)
 		return ret;
 
 	/* Set clock frequency */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0xf0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0xf0);
 	if (ret < 0)
 		return ret;
 
 	/* Set precharge period in number of ticks from the internal clock */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x22);
 	if (ret < 0)
 		return ret;
 
 	/* Set COM pins configuration */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x22);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x22);
 	if (ret < 0)
 		return ret;
 
 	/* Set VCOMH */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x49);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x49);
 	if (ret < 0)
 		return ret;
 
 	/* Turn on the DC-DC Charge Pump */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x14);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x14);
 	if (ret < 0)
 		return ret;
 
 	/* Switch to horizontal addressing mode */
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
-	ret = ret & ssd1307fb_write_cmd(par->client,
-					SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
+				  SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
 	if (ret < 0)
 		return ret;
 
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
-	ret = ret & ssd1307fb_write_cmd(par->client, par->width - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, par->width - 1);
 	if (ret < 0)
 		return ret;
 
 	ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
-	ret = ret & ssd1307fb_write_cmd(par->client, 0x0);
-	ret = ret & ssd1307fb_write_cmd(par->client,
-					par->page_offset + (par->height / 8) - 1);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = ssd1307fb_write_cmd(par->client,
+				  par->page_offset + (par->height / 8) - 1);
 	if (ret < 0)
 		return ret;