diff mbox series

[v2,05/28] video: fbdev: aty: Fix set but not used warnings

Message ID 20201128224114.1033617-6-sam@ravnborg.org (mailing list archive)
State Superseded, archived
Headers show
Series drivers/video: W=1 warning fixes | expand

Commit Message

Sam Ravnborg Nov. 28, 2020, 10:40 p.m. UTC
Fix W=1 warnings about variables assigned but never used.

- Drop variables that was set but never used
- Make variable definition conditional om ATARI

v2:
  - Fix m68k build error (kernel test robot)
  - Improve subject (Lee Jones)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com> # m68k build fix
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
---
 drivers/video/fbdev/aty/atyfb_base.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

Comments

Thomas Zimmermann Nov. 30, 2020, 8:53 a.m. UTC | #1
Am 28.11.20 um 23:40 schrieb Sam Ravnborg:
> Fix W=1 warnings about variables assigned but never used.
> 
> - Drop variables that was set but never used

s/that was/that were

> - Make variable definition conditional om ATARI

s/om/on

> 
> v2:
>    - Fix m68k build error (kernel test robot)
>    - Improve subject (Lee Jones)
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Reported-by: kernel test robot <lkp@intel.com> # m68k build fix
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Joe Perches <joe@perches.com>
> Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
> Cc: Jason Yan <yanaijie@huawei.com>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Jani Nikula <jani.nikula@intel.com>

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>

> ---
>   drivers/video/fbdev/aty/atyfb_base.c | 11 ++++-------
>   1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
> index c8feff0ee8da..83c8e809955a 100644
> --- a/drivers/video/fbdev/aty/atyfb_base.c
> +++ b/drivers/video/fbdev/aty/atyfb_base.c
> @@ -2353,6 +2353,9 @@ static int aty_init(struct fb_info *info)
>   	int gtb_memsize, has_var = 0;
>   	struct fb_var_screeninfo var;
>   	int ret;
> +#ifdef CONFIG_ATARI
> +	u8 dac_type;
> +#endif
>   
>   	init_waitqueue_head(&par->vblank.wait);
>   	spin_lock_init(&par->int_lock);
> @@ -2360,13 +2363,12 @@ static int aty_init(struct fb_info *info)
>   #ifdef CONFIG_FB_ATY_GX
>   	if (!M64_HAS(INTEGRATED)) {
>   		u32 stat0;
> -		u8 dac_type, dac_subtype, clk_type;
> +		u8 dac_subtype, clk_type;
>   		stat0 = aty_ld_le32(CNFG_STAT0, par);
>   		par->bus_type = (stat0 >> 0) & 0x07;
>   		par->ram_type = (stat0 >> 3) & 0x07;
>   		ramname = aty_gx_ram[par->ram_type];
>   		/* FIXME: clockchip/RAMDAC probing? */
> -		dac_type = (aty_ld_le32(DAC_CNTL, par) >> 16) & 0x07;
>   #ifdef CONFIG_ATARI
>   		clk_type = CLK_ATI18818_1;
>   		dac_type = (stat0 >> 9) & 0x07;
> @@ -2375,7 +2377,6 @@ static int aty_init(struct fb_info *info)
>   		else
>   			dac_subtype = (aty_ld_8(SCRATCH_REG1 + 1, par) & 0xF0) | dac_type;
>   #else
> -		dac_type = DAC_IBMRGB514;
>   		dac_subtype = DAC_IBMRGB514;
>   		clk_type = CLK_IBMRGB514;
>   #endif
> @@ -3062,7 +3063,6 @@ static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info,
>   	if (dp == of_console_device) {
>   		struct fb_var_screeninfo *var = &default_var;
>   		unsigned int N, P, Q, M, T, R;
> -		u32 v_total, h_total;
>   		struct crtc crtc;
>   		u8 pll_regs[16];
>   		u8 clock_cntl;
> @@ -3078,9 +3078,6 @@ static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info,
>   		crtc.gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
>   		aty_crtc_to_var(&crtc, var);
>   
> -		h_total = var->xres + var->right_margin + var->hsync_len + var->left_margin;
> -		v_total = var->yres + var->lower_margin + var->vsync_len + var->upper_margin;
> -
>   		/*
>   		 * Read the PLL to figure actual Refresh Rate.
>   		 */
>
diff mbox series

Patch

diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index c8feff0ee8da..83c8e809955a 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -2353,6 +2353,9 @@  static int aty_init(struct fb_info *info)
 	int gtb_memsize, has_var = 0;
 	struct fb_var_screeninfo var;
 	int ret;
+#ifdef CONFIG_ATARI
+	u8 dac_type;
+#endif
 
 	init_waitqueue_head(&par->vblank.wait);
 	spin_lock_init(&par->int_lock);
@@ -2360,13 +2363,12 @@  static int aty_init(struct fb_info *info)
 #ifdef CONFIG_FB_ATY_GX
 	if (!M64_HAS(INTEGRATED)) {
 		u32 stat0;
-		u8 dac_type, dac_subtype, clk_type;
+		u8 dac_subtype, clk_type;
 		stat0 = aty_ld_le32(CNFG_STAT0, par);
 		par->bus_type = (stat0 >> 0) & 0x07;
 		par->ram_type = (stat0 >> 3) & 0x07;
 		ramname = aty_gx_ram[par->ram_type];
 		/* FIXME: clockchip/RAMDAC probing? */
-		dac_type = (aty_ld_le32(DAC_CNTL, par) >> 16) & 0x07;
 #ifdef CONFIG_ATARI
 		clk_type = CLK_ATI18818_1;
 		dac_type = (stat0 >> 9) & 0x07;
@@ -2375,7 +2377,6 @@  static int aty_init(struct fb_info *info)
 		else
 			dac_subtype = (aty_ld_8(SCRATCH_REG1 + 1, par) & 0xF0) | dac_type;
 #else
-		dac_type = DAC_IBMRGB514;
 		dac_subtype = DAC_IBMRGB514;
 		clk_type = CLK_IBMRGB514;
 #endif
@@ -3062,7 +3063,6 @@  static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info,
 	if (dp == of_console_device) {
 		struct fb_var_screeninfo *var = &default_var;
 		unsigned int N, P, Q, M, T, R;
-		u32 v_total, h_total;
 		struct crtc crtc;
 		u8 pll_regs[16];
 		u8 clock_cntl;
@@ -3078,9 +3078,6 @@  static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info,
 		crtc.gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
 		aty_crtc_to_var(&crtc, var);
 
-		h_total = var->xres + var->right_margin + var->hsync_len + var->left_margin;
-		v_total = var->yres + var->lower_margin + var->vsync_len + var->upper_margin;
-
 		/*
 		 * Read the PLL to figure actual Refresh Rate.
 		 */