diff mbox series

[v2,2/5] Staging: sm750fb: Rename pModeParam

Message ID 20231016201434.7880-3-anonolitunya@gmail.com (mailing list archive)
State Handled Elsewhere
Headers show
Series staging: sm750fb: Renaming camelcase to snakecase | expand

Commit Message

Dorcas Litunya Oct. 16, 2023, 8:14 p.m. UTC
Rename variable pModeParam to mode_param. This follows snakecase naming
convention and ensures a consistent naming style throughout the file.
Issue found by checkpatch.

Mutes the following checkpatch error:
CHECK: Avoid CamelCase: <pModeParam>

Signed-off-by: Dorcas AnonoLitunya <anonolitunya@gmail.com>
---
 drivers/staging/sm750fb/ddk750_mode.c | 52 +++++++++++++--------------
 1 file changed, 26 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index 8708995f676c..431b273a347a 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@ 
  * in bit 29:27 of Display Control register.
  */
 static unsigned long
-display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
+display_control_adjust_SM750LE(struct mode_parameter *mode_param,
 			       unsigned long dispControl)
 {
 	unsigned long x, y;
 
-	x = pModeParam->horizontal_display_end;
-	y = pModeParam->vertical_display_end;
+	x = mode_param->horizontal_display_end;
+	y = mode_param->vertical_display_end;
 
 	/*
 	 * SM750LE has to set up the top-left and bottom-right
@@ -75,7 +75,7 @@  display_control_adjust_SM750LE(struct mode_parameter *pModeParam,
 }
 
 /* only timing related registers will be  programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
+static int programModeRegisters(struct mode_parameter *mode_param,
 				struct pll_value *pll)
 {
 	int ret = 0;
@@ -86,46 +86,46 @@  static int programModeRegisters(struct mode_parameter *pModeParam,
 		/* programe secondary pixel clock */
 		poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
 
-		tmp = ((pModeParam->horizontal_total - 1) <<
+		tmp = ((mode_param->horizontal_total - 1) <<
 		       CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 		     CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
-		tmp |= (pModeParam->horizontal_display_end - 1) &
+		tmp |= (mode_param->horizontal_display_end - 1) &
 		      CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
 
 		poke32(CRT_HORIZONTAL_TOTAL, tmp);
 
-		tmp = (pModeParam->horizontal_sync_width <<
+		tmp = (mode_param->horizontal_sync_width <<
 		       CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 		     CRT_HORIZONTAL_SYNC_WIDTH_MASK;
-		tmp |= (pModeParam->horizontal_sync_start - 1) &
+		tmp |= (mode_param->horizontal_sync_start - 1) &
 		      CRT_HORIZONTAL_SYNC_START_MASK;
 
 		poke32(CRT_HORIZONTAL_SYNC, tmp);
 
-		tmp = ((pModeParam->vertical_total - 1) <<
+		tmp = ((mode_param->vertical_total - 1) <<
 		       CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
 		     CRT_VERTICAL_TOTAL_TOTAL_MASK;
-		tmp |= (pModeParam->vertical_display_end - 1) &
+		tmp |= (mode_param->vertical_display_end - 1) &
 		      CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
 
 		poke32(CRT_VERTICAL_TOTAL, tmp);
 
-		tmp = ((pModeParam->vertical_sync_height <<
+		tmp = ((mode_param->vertical_sync_height <<
 		       CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
 		     CRT_VERTICAL_SYNC_HEIGHT_MASK;
-		tmp |= (pModeParam->vertical_sync_start - 1) &
+		tmp |= (mode_param->vertical_sync_start - 1) &
 		      CRT_VERTICAL_SYNC_START_MASK;
 
 		poke32(CRT_VERTICAL_SYNC, tmp);
 
 		tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
-		if (pModeParam->vertical_sync_polarity)
+		if (mode_param->vertical_sync_polarity)
 			tmp |= DISPLAY_CTRL_VSYNC_PHASE;
-		if (pModeParam->horizontal_sync_polarity)
+		if (mode_param->horizontal_sync_polarity)
 			tmp |= DISPLAY_CTRL_HSYNC_PHASE;
 
 		if (sm750_get_chip_type() == SM750LE) {
-			display_control_adjust_SM750LE(pModeParam, tmp);
+			display_control_adjust_SM750LE(mode_param, tmp);
 		} else {
 			reg = peek32(CRT_DISPLAY_CTRL) &
 				~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@  static int programModeRegisters(struct mode_parameter *pModeParam,
 
 		poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
 
-		reg = ((pModeParam->horizontal_total - 1) <<
+		reg = ((mode_param->horizontal_total - 1) <<
 			PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
 			PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
-		reg |= ((pModeParam->horizontal_display_end - 1) &
+		reg |= ((mode_param->horizontal_display_end - 1) &
 			PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
 		poke32(PANEL_HORIZONTAL_TOTAL, reg);
 
 		poke32(PANEL_HORIZONTAL_SYNC,
-		       ((pModeParam->horizontal_sync_width <<
+		       ((mode_param->horizontal_sync_width <<
 			 PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
 			PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
-		       ((pModeParam->horizontal_sync_start - 1) &
+		       ((mode_param->horizontal_sync_start - 1) &
 			PANEL_HORIZONTAL_SYNC_START_MASK));
 
 		poke32(PANEL_VERTICAL_TOTAL,
-		       (((pModeParam->vertical_total - 1) <<
+		       (((mode_param->vertical_total - 1) <<
 			 PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
 			PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
-		       ((pModeParam->vertical_display_end - 1) &
+		       ((mode_param->vertical_display_end - 1) &
 			PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
 
 		poke32(PANEL_VERTICAL_SYNC,
-		       ((pModeParam->vertical_sync_height <<
+		       ((mode_param->vertical_sync_height <<
 			 PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
 			PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
-		       ((pModeParam->vertical_sync_start - 1) &
+		       ((mode_param->vertical_sync_start - 1) &
 			PANEL_VERTICAL_SYNC_START_MASK));
 
 		tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
-		if (pModeParam->vertical_sync_polarity)
+		if (mode_param->vertical_sync_polarity)
 			tmp |= DISPLAY_CTRL_VSYNC_PHASE;
-		if (pModeParam->horizontal_sync_polarity)
+		if (mode_param->horizontal_sync_polarity)
 			tmp |= DISPLAY_CTRL_HSYNC_PHASE;
-		if (pModeParam->clock_phase_polarity)
+		if (mode_param->clock_phase_polarity)
 			tmp |= DISPLAY_CTRL_CLOCK_PHASE;
 
 		reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |