diff --git a/Documentation/fb/index.rst b/Documentation/fb/index.rst
index baf02393d8ee..33e3c49f8856 100644
--- a/Documentation/fb/index.rst
+++ b/Documentation/fb/index.rst
@@ -19,7 +19,6 @@ Frame Buffer
     framebuffer
     gxfb
     intel810
-    intelfb
     internals
     lxfb
     matroxfb
diff --git a/Documentation/fb/intelfb.rst b/Documentation/fb/intelfb.rst
deleted file mode 100644
index e2d0903f4efb..000000000000
--- a/Documentation/fb/intelfb.rst
+++ /dev/null
@@ -1,155 +0,0 @@
-=============================================================
-Intel 830M/845G/852GM/855GM/865G/915G/945G Framebuffer driver
-=============================================================
-
-A. Introduction
-===============
-
-This is a framebuffer driver for various Intel 8xx/9xx compatible
-graphics devices.  These would include:
-
-	- Intel 830M
-	- Intel 845G
-	- Intel 852GM
-	- Intel 855GM
-	- Intel 865G
-	- Intel 915G
-	- Intel 915GM
-	- Intel 945G
-	- Intel 945GM
-	- Intel 945GME
-	- Intel 965G
-	- Intel 965GM
-
-B.  List of available options
-=============================
-
-   a. "video=intelfb"
-	enables the intelfb driver
-
-	Recommendation: required
-
-   b. "mode=<xres>x<yres>[-<bpp>][@<refresh>]"
-	select mode
-
-	Recommendation: user preference
-	(default = 1024x768-32@70)
-
-   c. "vram=<value>"
-	select amount of system RAM in MB to allocate for the video memory
-	if not enough RAM was already allocated by the BIOS.
-
-	Recommendation: 1 - 4 MB.
-	(default = 4 MB)
-
-   d. "voffset=<value>"
-	select at what offset in MB of the logical memory to allocate the
-	framebuffer memory.  The intent is to avoid the memory blocks
-	used by standard graphics applications (XFree86). Depending on your
-	usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
-	for the least amount).  Note, an arbitrary setting may conflict
-	with XFree86.
-
-	Recommendation: do not set
-	(default = 48 MB)
-
-   e. "accel"
-	enable text acceleration.  This can be enabled/reenabled anytime
-	by using 'fbset -accel true/false'.
-
-	Recommendation: enable
-	(default = set)
-
-   f. "hwcursor"
-	enable cursor acceleration.
-
-	Recommendation: enable
-	(default = set)
-
-   g. "mtrr"
-	enable MTRR.  This allows data transfers to the framebuffer memory
-	to occur in bursts which can significantly increase performance.
-	Not very helpful with the intel chips because of 'shared memory'.
-
-	Recommendation: set
-	(default = set)
-
-   h. "fixed"
-	disable mode switching.
-
-	Recommendation: do not set
-	(default = not set)
-
-   The binary parameters can be unset with a "no" prefix, example "noaccel".
-   The default parameter (not named) is the mode.
-
-C. Kernel booting
-=================
-
-Separate each option/option-pair by commas (,) and the option from its value
-with an equals sign (=) as in the following::
-
-	video=intelfb:option1,option2=value2
-
-Sample Usage
-------------
-
-In /etc/lilo.conf, add the line::
-
-	append="video=intelfb:mode=800x600-32@75,accel,hwcursor,vram=8"
-
-This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
-framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
-will be enabled.
-
-Remarks
--------
-
-If setting this parameter doesn't work (you stay in a 80x25 text-mode),
-you might need to set the "vga=<mode>" parameter too - see vesafb.txt
-in this directory.
-
-
-D.  Module options
-==================
-
-The module parameters are essentially similar to the kernel
-parameters. The main difference is that you need to include a Boolean value
-(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
-
-Example, to enable MTRR, include "mtrr=1".
-
-Sample Usage
-------------
-
-Using the same setup as described above, load the module like this::
-
-	modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-Or just add the following to a configuration file in /etc/modprobe.d/::
-
-	options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
-
-and just do a::
-
-	modprobe intelfb
-
-
-E.  Acknowledgment:
-===================
-
-	1.  Geert Uytterhoeven - his excellent howto and the virtual
-	    framebuffer driver code made this possible.
-
-	2.  Jeff Hartmann for his agpgart code.
-
-	3.  David Dawes for his original kernel 2.4 code.
-
-	4.  The X developers.  Insights were provided just by reading the
-	    XFree86 source code.
-
-	5.  Antonino A. Daplas for his inspiring i810fb driver.
-
-	6.  Andrew Morton for his kernel patches maintenance.
-
-Sylvain
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 4ea5b837399a..08a1e2388614 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -128,7 +128,6 @@ Code  Seq#    Include File                                           Comments
 'F'   all    linux/fb.h                                              conflict!
 'F'   01-02  drivers/scsi/pmcraid.h                                  conflict!
 'F'   20     drivers/video/fsl-diu-fb.h                              conflict!
-'F'   20     drivers/video/intelfb/intelfb.h                         conflict!
 'F'   20     linux/ivtvfb.h                                          conflict!
 'F'   20     linux/matroxfb.h                                        conflict!
 'F'   20     drivers/video/aty/atyfb_base.c                          conflict!
diff --git a/MAINTAINERS b/MAINTAINERS
index d138317c9417..48450a0f6a8c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10666,13 +10666,6 @@ S:	Supported
 F:	drivers/infiniband/hw/irdma/
 F:	include/uapi/rdma/irdma-abi.h
 
-INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-M:	Maik Broemme <mbroemme@libmpq.org>
-L:	linux-fbdev@vger.kernel.org
-S:	Maintained
-F:	Documentation/fb/intelfb.rst
-F:	drivers/video/fbdev/intelfb/
-
 INTEL GPIO DRIVERS
 M:	Andy Shevchenko <andy@kernel.org>
 L:	linux-gpio@vger.kernel.org
diff --git a/drivers/Makefile b/drivers/Makefile
index d828329c268d..37fd6ce3bd7f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -71,9 +71,8 @@ obj-y				+= gpu/
 
 obj-$(CONFIG_CONNECTOR)		+= connector/
 
-# i810fb and intelfb depend on char/agp/
+# i810fb depends on char/agp/
 obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
 
 obj-$(CONFIG_PARPORT)		+= parport/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index d5909a9206ff..a57d8312667b 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -854,45 +854,6 @@ config FB_CARILLO_RANCH
 	help
 	  This driver supports the LE80578 (Carillo Ranch) board
 
-config FB_INTEL
-	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
-	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_IOMEM_FOPS
-	select FB_MODE_HELPERS
-	select BOOT_VESA_SUPPORT if FB_INTEL = y
-	select VIDEO_NOMODESET
-	depends on !DRM_I915
-	help
-	  This driver supports the on-board graphics built in to the Intel
-	  830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
-	  Say Y if you have and plan to use such a board.
-
-	  To make FB_INTEL=Y work you need to say AGP_INTEL=y too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called intelfb.
-
-	  For more information, please read <file:Documentation/fb/intelfb.rst>
-
-config FB_INTEL_DEBUG
-	bool "Intel driver Debug Messages"
-	depends on FB_INTEL
-	help
-	  Say Y here if you want the Intel driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_INTEL_I2C
-	bool "DDC/I2C for Intel framebuffer support"
-	depends on FB_INTEL
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-
 config FB_MATROX
 	tristate "Matrox acceleration"
 	depends on FB && PCI
diff --git a/drivers/video/fbdev/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
deleted file mode 100644
index 7ff2debb31af..000000000000
--- a/drivers/video/fbdev/intelfb/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_FB_INTEL) += intelfb.o
-
-intelfb-y := intelfbdrv.o intelfbhw.o
-intelfb-$(CONFIG_FB_INTEL_I2C) += intelfb_i2c.o
-intelfb-objs := $(intelfb-y)
-
-ccflags-$(CONFIG_FB_INTEL_DEBUG) := -DDEBUG -DREGDUMP
diff --git a/drivers/video/fbdev/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
deleted file mode 100644
index 5de703902a21..000000000000
--- a/drivers/video/fbdev/intelfb/intelfb.h
+++ /dev/null
@@ -1,382 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _INTELFB_H
-#define _INTELFB_H
-
-/* $DHD: intelfb/intelfb.h,v 1.40 2003/06/27 15:06:25 dawes Exp $ */
-
-#include <linux/agp_backend.h>
-#include <linux/fb.h>
-
-#ifdef CONFIG_FB_INTEL_I2C
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#endif
-
-/*** Version/name ***/
-#define INTELFB_VERSION			"0.9.6"
-#define INTELFB_MODULE_NAME		"intelfb"
-#define SUPPORTED_CHIPSETS		"830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM"
-
-
-/*** Debug/feature defines ***/
-
-#ifndef DEBUG
-#define DEBUG				0
-#endif
-
-#ifndef VERBOSE
-#define VERBOSE				0
-#endif
-
-#ifndef REGDUMP
-#define REGDUMP				0
-#endif
-
-#ifndef DETECT_VGA_CLASS_ONLY
-#define DETECT_VGA_CLASS_ONLY		1
-#endif
-
-#ifndef ALLOCATE_FOR_PANNING
-#define ALLOCATE_FOR_PANNING		1
-#endif
-
-#ifndef PREFERRED_MODE
-#define PREFERRED_MODE			"1024x768-32@70"
-#endif
-
-/*** hw-related values ***/
-
-/* Resource Allocation */
-#define INTELFB_FB_ACQUIRED                 1
-#define INTELFB_MMIO_ACQUIRED               2
-
-/* PCI ids for supported devices */
-#define PCI_DEVICE_ID_INTEL_830M	0x3577
-#define PCI_DEVICE_ID_INTEL_845G	0x2562
-#define PCI_DEVICE_ID_INTEL_85XGM	0x3582
-#define PCI_DEVICE_ID_INTEL_854		0x358E
-#define PCI_DEVICE_ID_INTEL_865G	0x2572
-#define PCI_DEVICE_ID_INTEL_915G	0x2582
-#define PCI_DEVICE_ID_INTEL_915GM	0x2592
-#define PCI_DEVICE_ID_INTEL_945G	0x2772
-#define PCI_DEVICE_ID_INTEL_945GM	0x27A2
-#define PCI_DEVICE_ID_INTEL_945GME	0x27AE
-#define PCI_DEVICE_ID_INTEL_965G	0x29A2
-#define PCI_DEVICE_ID_INTEL_965GM	0x2A02
-
-/* Size of MMIO region */
-#define INTEL_REG_SIZE			0x80000
-
-#define STRIDE_ALIGNMENT		16
-#define STRIDE_ALIGNMENT_I9XX		64
-
-#define PALETTE_8_ENTRIES		256
-
-
-/*** Macros ***/
-
-/* basic arithmetic */
-#define KB(x)			((x) * 1024)
-#define MB(x)			((x) * 1024 * 1024)
-#define BtoKB(x)		((x) / 1024)
-#define BtoMB(x)		((x) / 1024 / 1024)
-
-#define GTT_PAGE_SIZE           KB(4)
-
-#define ROUND_UP_TO(x, y)	(((x) + (y) - 1) / (y) * (y))
-#define ROUND_DOWN_TO(x, y)	((x) / (y) * (y))
-#define ROUND_UP_TO_PAGE(x)	ROUND_UP_TO((x), GTT_PAGE_SIZE)
-#define ROUND_DOWN_TO_PAGE(x)	ROUND_DOWN_TO((x), GTT_PAGE_SIZE)
-
-/* messages */
-#define PFX			INTELFB_MODULE_NAME ": "
-
-#define ERR_MSG(fmt, args...)	printk(KERN_ERR PFX fmt, ## args)
-#define WRN_MSG(fmt, args...)	printk(KERN_WARNING PFX fmt, ## args)
-#define NOT_MSG(fmt, args...)	printk(KERN_NOTICE PFX fmt, ## args)
-#define INF_MSG(fmt, args...)	printk(KERN_INFO PFX fmt, ## args)
-#if DEBUG
-#define DBG_MSG(fmt, args...)	printk(KERN_DEBUG PFX fmt, ## args)
-#else
-#define DBG_MSG(fmt, args...)	while (0) printk(fmt, ## args)
-#endif
-
-/* get commonly used pointers */
-#define GET_DINFO(info)		(info)->par
-
-/* misc macros */
-#define ACCEL(d, i)                                                     \
-	((d)->accel && !(d)->ring_lockup &&                             \
-	 ((i)->var.accel_flags & FB_ACCELF_TEXT))
-
-/*#define NOACCEL_CHIPSET(d)						\
-	((d)->chipset != INTEL_865G)*/
-#define NOACCEL_CHIPSET(d)						\
-	(0)
-
-#define FIXED_MODE(d) ((d)->fixed_mode)
-
-/*** Driver parameters ***/
-
-#define RINGBUFFER_SIZE		KB(64)
-#define HW_CURSOR_SIZE		KB(4)
-
-/* Intel agpgart driver */
-#define AGP_PHYSICAL_MEMORY     2
-
-/* store information about an Ixxx DVO */
-/* The i830->i865 use multiple DVOs with multiple i2cs */
-/* the i915, i945 have a single sDVO i2c bus - which is different */
-#define MAX_OUTPUTS 6
-
-/* these are outputs from the chip - integrated only
-   external chips are via DVO or SDVO output */
-#define INTELFB_OUTPUT_UNUSED 0
-#define INTELFB_OUTPUT_ANALOG 1
-#define INTELFB_OUTPUT_DVO 2
-#define INTELFB_OUTPUT_SDVO 3
-#define INTELFB_OUTPUT_LVDS 4
-#define INTELFB_OUTPUT_TVOUT 5
-
-#define INTELFB_DVO_CHIP_NONE 0
-#define INTELFB_DVO_CHIP_LVDS 1
-#define INTELFB_DVO_CHIP_TMDS 2
-#define INTELFB_DVO_CHIP_TVOUT 4
-
-#define INTELFB_OUTPUT_PIPE_NC  0
-#define INTELFB_OUTPUT_PIPE_A   1
-#define INTELFB_OUTPUT_PIPE_B   2
-
-/*** Data Types ***/
-
-/* supported chipsets */
-enum intel_chips {
-	INTEL_830M,
-	INTEL_845G,
-	INTEL_85XGM,
-	INTEL_852GM,
-	INTEL_852GME,
-	INTEL_854,
-	INTEL_855GM,
-	INTEL_855GME,
-	INTEL_865G,
-	INTEL_915G,
-	INTEL_915GM,
-	INTEL_945G,
-	INTEL_945GM,
-	INTEL_945GME,
-	INTEL_965G,
-	INTEL_965GM,
-};
-
-struct intelfb_hwstate {
-	u32 vga0_divisor;
-	u32 vga1_divisor;
-	u32 vga_pd;
-	u32 dpll_a;
-	u32 dpll_b;
-	u32 fpa0;
-	u32 fpa1;
-	u32 fpb0;
-	u32 fpb1;
-	u32 palette_a[PALETTE_8_ENTRIES];
-	u32 palette_b[PALETTE_8_ENTRIES];
-	u32 htotal_a;
-	u32 hblank_a;
-	u32 hsync_a;
-	u32 vtotal_a;
-	u32 vblank_a;
-	u32 vsync_a;
-	u32 src_size_a;
-	u32 bclrpat_a;
-	u32 htotal_b;
-	u32 hblank_b;
-	u32 hsync_b;
-	u32 vtotal_b;
-	u32 vblank_b;
-	u32 vsync_b;
-	u32 src_size_b;
-	u32 bclrpat_b;
-	u32 adpa;
-	u32 dvoa;
-	u32 dvob;
-	u32 dvoc;
-	u32 dvoa_srcdim;
-	u32 dvob_srcdim;
-	u32 dvoc_srcdim;
-	u32 lvds;
-	u32 pipe_a_conf;
-	u32 pipe_b_conf;
-	u32 disp_arb;
-	u32 cursor_a_control;
-	u32 cursor_b_control;
-	u32 cursor_a_base;
-	u32 cursor_b_base;
-	u32 cursor_size;
-	u32 disp_a_ctrl;
-	u32 disp_b_ctrl;
-	u32 disp_a_base;
-	u32 disp_b_base;
-	u32 cursor_a_palette[4];
-	u32 cursor_b_palette[4];
-	u32 disp_a_stride;
-	u32 disp_b_stride;
-	u32 vgacntrl;
-	u32 add_id;
-	u32 swf0x[7];
-	u32 swf1x[7];
-	u32 swf3x[3];
-	u32 fence[8];
-	u32 instpm;
-	u32 mem_mode;
-	u32 fw_blc_0;
-	u32 fw_blc_1;
-	u16 hwstam;
-	u16 ier;
-	u16 iir;
-	u16 imr;
-};
-
-struct intelfb_heap_data {
-	u32 physical;
-	u8 __iomem *virtual;
-	u32 offset;		/* in GATT pages */
-	u32 size;		/* in bytes */
-};
-
-#ifdef CONFIG_FB_INTEL_I2C
-struct intelfb_i2c_chan {
-    struct intelfb_info *dinfo;
-    u32 reg;
-    struct i2c_adapter adapter;
-    struct i2c_algo_bit_data algo;
-};
-#endif
-
-struct intelfb_output_rec {
-    int type;
-    int pipe;
-    int flags;
-
-#ifdef CONFIG_FB_INTEL_I2C
-    struct intelfb_i2c_chan i2c_bus;
-    struct intelfb_i2c_chan ddc_bus;
-#endif
-};
-
-struct intelfb_vsync {
-	wait_queue_head_t wait;
-	unsigned int count;
-	int pan_display;
-	u32 pan_offset;
-};
-
-struct intelfb_info {
-	struct fb_info *info;
-	const struct fb_ops *fbops;
-	struct pci_dev *pdev;
-
-	struct intelfb_hwstate save_state;
-
-	/* agpgart structs */
-	struct agp_memory *gtt_fb_mem;     /* use all stolen memory or vram */
-	struct agp_memory *gtt_ring_mem;   /* ring buffer */
-	struct agp_memory *gtt_cursor_mem; /* hw cursor */
-
-	/* use a gart reserved fb mem */
-	u8 fbmem_gart;
-
-	int wc_cookie;
-
-	/* heap data */
-	struct intelfb_heap_data aperture;
-	struct intelfb_heap_data fb;
-	struct intelfb_heap_data ring;
-	struct intelfb_heap_data cursor;
-
-	/* mmio regs */
-	u32 mmio_base_phys;
-	u8 __iomem *mmio_base;
-
-	/* fb start offset (in bytes) */
-	u32 fb_start;
-
-	/* ring buffer */
-	u32 ring_head;
-	u32 ring_tail;
-	u32 ring_tail_mask;
-	u32 ring_space;
-	u32 ring_lockup;
-
-	/* palette */
-	u32 pseudo_palette[16];
-
-	/* chip info */
-	int pci_chipset;
-	int chipset;
-	const char *name;
-	int mobile;
-
-	/* current mode */
-	int bpp, depth;
-	u32 visual;
-	int xres, yres, pitch;
-	int pixclock;
-
-	/* current pipe */
-	int pipe;
-
-	/* some flags */
-	int accel;
-	int hwcursor;
-	int fixed_mode;
-	int ring_active;
-	int flag;
-	unsigned long irq_flags;
-	int open;
-
-	/* vsync */
-	struct intelfb_vsync vsync;
-	spinlock_t int_lock;
-
-	/* hw cursor */
-	int cursor_on;
-	int cursor_blanked;
-	u8  cursor_src[64];
-
-	/* initial parameters */
-	int initial_vga;
-	struct fb_var_screeninfo initial_var;
-	u32 initial_fb_base;
-	u32 initial_video_ram;
-	u32 initial_pitch;
-
-	/* driver registered */
-	int registered;
-
-	/* index into plls */
-	int pll_index;
-
-	/* outputs */
-	int num_outputs;
-	struct intelfb_output_rec output[MAX_OUTPUTS];
-};
-
-#define IS_I9XX(dinfo) (((dinfo)->chipset == INTEL_915G) ||	\
-			((dinfo)->chipset == INTEL_915GM) ||	\
-			((dinfo)->chipset == INTEL_945G) ||	\
-			((dinfo)->chipset == INTEL_945GM) ||	\
-			((dinfo)->chipset == INTEL_945GME) ||	\
-			((dinfo)->chipset == INTEL_965G) ||	\
-			((dinfo)->chipset == INTEL_965GM))
-
-/*** function prototypes ***/
-
-extern int intelfb_var_to_depth(const struct fb_var_screeninfo *var);
-
-#ifdef CONFIG_FB_INTEL_I2C
-extern void intelfb_create_i2c_busses(struct intelfb_info *dinfo);
-extern void intelfb_delete_i2c_busses(struct intelfb_info *dinfo);
-#endif
-
-#endif /* _INTELFB_H */
diff --git a/drivers/video/fbdev/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
deleted file mode 100644
index 3300bd31d9d7..000000000000
--- a/drivers/video/fbdev/intelfb/intelfb_i2c.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**************************************************************************
-
- Copyright 2006 Dave Airlie <airlied@linux.ie>
-
-All Rights Reserved.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-on the rights to use, copy, modify, merge, publish, distribute, sub
-license, and/or sell copies of the Software, and to permit persons to whom
-the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice (including the next
-paragraph) shall be included in all copies or substantial portions of the
-Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
-THE COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
-DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
-OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
-USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-**************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/fb.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-#include <asm/io.h>
-
-#include "intelfb.h"
-#include "intelfbhw.h"
-
-/* bit locations in the registers */
-#define SCL_DIR_MASK		0x0001
-#define SCL_DIR			0x0002
-#define SCL_VAL_MASK		0x0004
-#define SCL_VAL_OUT		0x0008
-#define SCL_VAL_IN		0x0010
-#define SDA_DIR_MASK		0x0100
-#define SDA_DIR			0x0200
-#define SDA_VAL_MASK		0x0400
-#define SDA_VAL_OUT		0x0800
-#define SDA_VAL_IN		0x1000
-
-static void intelfb_gpio_setscl(void *data, int state)
-{
-	struct intelfb_i2c_chan *chan = data;
-	struct intelfb_info *dinfo = chan->dinfo;
-	u32 val;
-
-	OUTREG(chan->reg, (state ? SCL_VAL_OUT : 0) |
-	       SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK);
-	val = INREG(chan->reg);
-}
-
-static void intelfb_gpio_setsda(void *data, int state)
-{
-	struct intelfb_i2c_chan *chan = data;
-	struct intelfb_info *dinfo = chan->dinfo;
-	u32 val;
-
-	OUTREG(chan->reg, (state ? SDA_VAL_OUT : 0) |
-	       SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK);
-	val = INREG(chan->reg);
-}
-
-static int intelfb_gpio_getscl(void *data)
-{
-	struct intelfb_i2c_chan *chan = data;
-	struct intelfb_info *dinfo = chan->dinfo;
-	u32 val;
-
-	OUTREG(chan->reg, SCL_DIR_MASK);
-	OUTREG(chan->reg, 0);
-	val = INREG(chan->reg);
-	return ((val & SCL_VAL_IN) != 0);
-}
-
-static int intelfb_gpio_getsda(void *data)
-{
-	struct intelfb_i2c_chan *chan = data;
-	struct intelfb_info *dinfo = chan->dinfo;
-	u32 val;
-
-	OUTREG(chan->reg, SDA_DIR_MASK);
-	OUTREG(chan->reg, 0);
-	val = INREG(chan->reg);
-	return ((val & SDA_VAL_IN) != 0);
-}
-
-static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo,
-				 struct intelfb_i2c_chan *chan,
-				 const u32 reg, const char *name,
-				 int class)
-{
-	int rc;
-
-	chan->dinfo			= dinfo;
-	chan->reg			= reg;
-	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
-		 "intelfb %s", name);
-	chan->adapter.class		= class;
-	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.algo_data		= &chan->algo;
-	chan->adapter.dev.parent	= &chan->dinfo->pdev->dev;
-	chan->algo.setsda		= intelfb_gpio_setsda;
-	chan->algo.setscl		= intelfb_gpio_setscl;
-	chan->algo.getsda		= intelfb_gpio_getsda;
-	chan->algo.getscl		= intelfb_gpio_getscl;
-	chan->algo.udelay		= 40;
-	chan->algo.timeout		= 20;
-	chan->algo.data			= chan;
-
-	i2c_set_adapdata(&chan->adapter, chan);
-
-	/* Raise SCL and SDA */
-	intelfb_gpio_setsda(chan, 1);
-	intelfb_gpio_setscl(chan, 1);
-	udelay(20);
-
-	rc = i2c_bit_add_bus(&chan->adapter);
-	if (rc == 0)
-		DBG_MSG("I2C bus %s registered.\n", name);
-	else
-		WRN_MSG("Failed to register I2C bus %s.\n", name);
-	return rc;
-}
-
-void intelfb_create_i2c_busses(struct intelfb_info *dinfo)
-{
-	int i = 0;
-
-	/* everyone has at least a single analog output */
-	dinfo->num_outputs = 1;
-	dinfo->output[i].type = INTELFB_OUTPUT_ANALOG;
-
-	/* setup the DDC bus for analog output */
-	intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA,
-			      "CRTDDC_A", I2C_CLASS_DDC);
-	i++;
-
-	/* need to add the output busses for each device
-	   - this function is very incomplete
-	   - i915GM has LVDS and TVOUT for example
-	*/
-	switch(dinfo->chipset) {
-	case INTEL_830M:
-	case INTEL_845G:
-	case INTEL_854:
-	case INTEL_855GM:
-	case INTEL_865G:
-		dinfo->output[i].type = INTELFB_OUTPUT_DVO;
-		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus,
-				      GPIOD, "DVODDC_D", I2C_CLASS_DDC);
-		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
-				      GPIOE, "DVOI2C_E", 0);
-		i++;
-		break;
-	case INTEL_915G:
-	case INTEL_915GM:
-		/* has some LVDS + tv-out */
-	case INTEL_945G:
-	case INTEL_945GM:
-	case INTEL_945GME:
-	case INTEL_965G:
-	case INTEL_965GM:
-		/* SDVO ports have a single control bus - 2 devices */
-		dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
-		intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus,
-				      GPIOE, "SDVOCTRL_E", 0);
-		/* TODO: initialize the SDVO */
-		/* I830SDVOInit(pScrn, i, DVOB); */
-		i++;
-
-		/* set up SDVOC */
-		dinfo->output[i].type = INTELFB_OUTPUT_SDVO;
-		dinfo->output[i].i2c_bus = dinfo->output[i - 1].i2c_bus;
-		/* TODO: initialize the SDVO */
-		/* I830SDVOInit(pScrn, i, DVOC); */
-		i++;
-		break;
-	}
-	dinfo->num_outputs = i;
-}
-
-void intelfb_delete_i2c_busses(struct intelfb_info *dinfo)
-{
-	int i;
-
-	for (i = 0; i < MAX_OUTPUTS; i++) {
-		if (dinfo->output[i].i2c_bus.dinfo) {
-			i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter);
-			dinfo->output[i].i2c_bus.dinfo = NULL;
-		}
-		if (dinfo->output[i].ddc_bus.dinfo) {
-			i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter);
-			dinfo->output[i].ddc_bus.dinfo = NULL;
-		}
-	}
-}
diff --git a/drivers/video/fbdev/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
deleted file mode 100644
index d29d80a16295..000000000000
--- a/drivers/video/fbdev/intelfb/intelfbdrv.c
+++ /dev/null
@@ -1,1680 +0,0 @@
-/*
- * intelfb
- *
- * Linux framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/
- * 945G/945GM/945GME/965G/965GM integrated graphics chips.
- *
- * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
- *                   2004 Sylvain Meyer
- *                   2006 David Airlie
- *
- * This driver consists of two parts.  The first part (intelfbdrv.c) provides
- * the basic fbdev interfaces, is derived in part from the radeonfb and
- * vesafb drivers, and is covered by the GPL.  The second part (intelfbhw.c)
- * provides the code to program the hardware.  Most of it is derived from
- * the i810/i830 XFree86 driver.  The HW-specific code is covered here
- * under a dual license (GPL and MIT/XFree86 license).
- *
- * Author: David Dawes
- *
- */
-
-/* $DHD: intelfb/intelfbdrv.c,v 1.20 2003/06/27 15:17:40 dawes Exp $ */
-
-/*
- * Changes:
- *    01/2003 - Initial driver (0.1.0), no mode switching, no acceleration.
- *		This initial version is a basic core that works a lot like
- *		the vesafb driver.  It must be built-in to the kernel,
- *		and the initial video mode must be set with vga=XXX at
- *		boot time.  (David Dawes)
- *
- *    01/2003 - Version 0.2.0: Mode switching added, colormap support
- *		implemented, Y panning, and soft screen blanking implemented.
- *		No acceleration yet.  (David Dawes)
- *
- *    01/2003 - Version 0.3.0: fbcon acceleration support added.  Module
- *		option handling added.  (David Dawes)
- *
- *    01/2003 - Version 0.4.0: fbcon HW cursor support added.  (David Dawes)
- *
- *    01/2003 - Version 0.4.1: Add auto-generation of built-in modes.
- *		(David Dawes)
- *
- *    02/2003 - Version 0.4.2: Add check for active non-CRT devices, and
- *		mode validation checks.  (David Dawes)
- *
- *    02/2003 - Version 0.4.3: Check when the VC is in graphics mode so that
- *		acceleration is disabled while an XFree86 server is running.
- *		(David Dawes)
- *
- *    02/2003 - Version 0.4.4: Monitor DPMS support.  (David Dawes)
- *
- *    02/2003 - Version 0.4.5: Basic XFree86 + fbdev working.  (David Dawes)
- *
- *    02/2003 - Version 0.5.0: Modify to work with the 2.5.32 kernel as well
- *		as 2.4.x kernels.  (David Dawes)
- *
- *    02/2003 - Version 0.6.0: Split out HW-specifics into a separate file.
- *		(David Dawes)
- *
- *    02/2003 - Version 0.7.0: Test on 852GM/855GM.  Acceleration and HW
- *		cursor are disabled on this platform.  (David Dawes)
- *
- *    02/2003 - Version 0.7.1: Test on 845G.  Acceleration is disabled
- *		on this platform.  (David Dawes)
- *
- *    02/2003 - Version 0.7.2: Test on 830M.  Acceleration and HW
- *		cursor are disabled on this platform.  (David Dawes)
- *
- *    02/2003 - Version 0.7.3: Fix 8-bit modes for mobile platforms
- *		(David Dawes)
- *
- *    02/2003 - Version 0.7.4: Add checks for FB and FBCON_HAS_CFB* configured
- *		in the kernel, and add mode bpp verification and default
- *		bpp selection based on which FBCON_HAS_CFB* are configured.
- *		(David Dawes)
- *
- *    02/2003 - Version 0.7.5: Add basic package/install scripts based on the
- *		DRI packaging scripts.  (David Dawes)
- *
- *    04/2003 - Version 0.7.6: Fix typo that affects builds with SMP-enabled
- *		kernels.  (David Dawes, reported by Anupam).
- *
- *    06/2003 - Version 0.7.7:
- *              Fix Makefile.kernel build problem (Tsutomu Yasuda).
- *		Fix mis-placed #endif (2.4.21 kernel).
- *
- *    09/2004 - Version 0.9.0 - by Sylvain Meyer
- *              Port to linux 2.6 kernel fbdev
- *              Fix HW accel and HW cursor on i845G
- *              Use of agpgart for fb memory reservation
- *              Add mtrr support
- *
- *    10/2004 - Version 0.9.1
- *              Use module_param instead of old MODULE_PARM
- *              Some cleanup
- *
- *    11/2004 - Version 0.9.2
- *              Add vram option to reserve more memory than stolen by BIOS
- *              Fix intelfbhw_pan_display typo
- *              Add __initdata annotations
- *
- *    04/2008 - Version 0.9.5
- *              Add support for 965G/965GM. (Maik Broemme <mbroemme@plusserver.de>)
- *
- *    08/2008 - Version 0.9.6
- *              Add support for 945GME. (Phil Endecott <spam_from_intelfb@chezphil.org>)
- */
-
-#include <linux/aperture.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/screen_info.h>
-
-#include <asm/io.h>
-
-#include "intelfb.h"
-#include "intelfbhw.h"
-#include "../edid.h"
-
-static void get_initial_mode(struct intelfb_info *dinfo);
-static void update_dinfo(struct intelfb_info *dinfo,
-			 struct fb_var_screeninfo *var);
-static int intelfb_open(struct fb_info *info, int user);
-static int intelfb_release(struct fb_info *info, int user);
-static int intelfb_check_var(struct fb_var_screeninfo *var,
-			     struct fb_info *info);
-static int intelfb_set_par(struct fb_info *info);
-static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			     unsigned blue, unsigned transp,
-			     struct fb_info *info);
-
-static int intelfb_blank(int blank, struct fb_info *info);
-static int intelfb_pan_display(struct fb_var_screeninfo *var,
-			       struct fb_info *info);
-
-static void intelfb_fillrect(struct fb_info *info,
-			     const struct fb_fillrect *rect);
-static void intelfb_copyarea(struct fb_info *info,
-			     const struct fb_copyarea *region);
-static void intelfb_imageblit(struct fb_info *info,
-			      const struct fb_image *image);
-static int intelfb_cursor(struct fb_info *info,
-			   struct fb_cursor *cursor);
-
-static int intelfb_sync(struct fb_info *info);
-
-static int intelfb_ioctl(struct fb_info *info,
-			 unsigned int cmd, unsigned long arg);
-
-static int intelfb_pci_register(struct pci_dev *pdev,
-				const struct pci_device_id *ent);
-static void intelfb_pci_unregister(struct pci_dev *pdev);
-static int intelfb_set_fbinfo(struct intelfb_info *dinfo);
-
-/*
- * Limiting the class to PCI_CLASS_DISPLAY_VGA prevents function 1 of the
- * mobile chipsets from being registered.
- */
-#if DETECT_VGA_CLASS_ONLY
-#define INTELFB_CLASS_MASK ~0 << 8
-#else
-#define INTELFB_CLASS_MASK 0
-#endif
-
-static const struct pci_device_id intelfb_pci_table[] = {
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_830M, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_830M },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GM },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945GME, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945GME },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965G },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_965GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_965GM },
-	{ 0, }
-};
-
-/* Global data */
-static int num_registered = 0;
-
-/* fb ops */
-static const struct fb_ops intel_fb_ops = {
-	.owner =		THIS_MODULE,
-	.fb_open =              intelfb_open,
-	.fb_release =           intelfb_release,
-	__FB_DEFAULT_IOMEM_OPS_RDWR,
-	.fb_check_var =         intelfb_check_var,
-	.fb_set_par =           intelfb_set_par,
-	.fb_setcolreg =		intelfb_setcolreg,
-	.fb_blank =		intelfb_blank,
-	.fb_pan_display =       intelfb_pan_display,
-	.fb_fillrect  =         intelfb_fillrect,
-	.fb_copyarea  =         intelfb_copyarea,
-	.fb_imageblit =         intelfb_imageblit,
-	.fb_cursor =            intelfb_cursor,
-	.fb_sync =              intelfb_sync,
-	.fb_ioctl =		intelfb_ioctl,
-	__FB_DEFAULT_IOMEM_OPS_MMAP,
-};
-
-/* PCI driver module table */
-static struct pci_driver intelfb_driver = {
-	.name =		"intelfb",
-	.id_table =	intelfb_pci_table,
-	.probe =	intelfb_pci_register,
-	.remove =	intelfb_pci_unregister,
-};
-
-/* Module description/parameters */
-MODULE_AUTHOR("David Dawes <dawes@tungstengraphics.com>, "
-	      "Sylvain Meyer <sylvain.meyer@worldonline.fr>");
-MODULE_DESCRIPTION("Framebuffer driver for Intel(R) " SUPPORTED_CHIPSETS
-		   " chipsets");
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
-
-static bool accel       = 1;
-static int vram         = 4;
-static bool hwcursor    = 0;
-static bool mtrr        = 1;
-static bool fixed       = 0;
-static bool noinit      = 0;
-static bool noregister  = 0;
-static bool probeonly   = 0;
-static bool idonly      = 0;
-static int bailearly    = 0;
-static int voffset	= 48;
-static char *mode       = NULL;
-
-module_param(accel, bool, S_IRUGO);
-MODULE_PARM_DESC(accel, "Enable hardware acceleration");
-module_param(vram, int, S_IRUGO);
-MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB");
-module_param(voffset, int, S_IRUGO);
-MODULE_PARM_DESC(voffset, "Offset of framebuffer in MiB");
-module_param(hwcursor, bool, S_IRUGO);
-MODULE_PARM_DESC(hwcursor, "Enable HW cursor");
-module_param(mtrr, bool, S_IRUGO);
-MODULE_PARM_DESC(mtrr, "Enable MTRR support");
-module_param(fixed, bool, S_IRUGO);
-MODULE_PARM_DESC(fixed, "Disable mode switching");
-module_param(noinit, bool, 0);
-MODULE_PARM_DESC(noinit, "Don't initialise graphics mode when loading");
-module_param(noregister, bool, 0);
-MODULE_PARM_DESC(noregister, "Don't register, just probe and exit (debug)");
-module_param(probeonly, bool, 0);
-MODULE_PARM_DESC(probeonly, "Do a minimal probe (debug)");
-module_param(idonly, bool, 0);
-MODULE_PARM_DESC(idonly, "Just identify without doing anything else (debug)");
-module_param(bailearly, int, 0);
-MODULE_PARM_DESC(bailearly, "Bail out early, depending on value (debug)");
-module_param(mode, charp, S_IRUGO);
-MODULE_PARM_DESC(mode,
-		 "Initial video mode \"<xres>x<yres>[-<depth>][@<refresh>]\"");
-
-#ifndef MODULE
-#define OPT_EQUAL(opt, name) (!strncmp(opt, name, strlen(name)))
-#define OPT_INTVAL(opt, name) simple_strtoul(opt + strlen(name) + 1, NULL, 0)
-#define OPT_STRVAL(opt, name) (opt + strlen(name))
-
-static __inline__ char * get_opt_string(const char *this_opt, const char *name)
-{
-	const char *p;
-	int i;
-	char *ret;
-
-	p = OPT_STRVAL(this_opt, name);
-	i = 0;
-	while (p[i] && p[i] != ' ' && p[i] != ',')
-		i++;
-	ret = kmalloc(i + 1, GFP_KERNEL);
-	if (ret) {
-		strncpy(ret, p, i);
-		ret[i] = '\0';
-	}
-	return ret;
-}
-
-static __inline__ int get_opt_int(const char *this_opt, const char *name,
-				  int *ret)
-{
-	if (!ret)
-		return 0;
-
-	if (!OPT_EQUAL(this_opt, name))
-		return 0;
-
-	*ret = OPT_INTVAL(this_opt, name);
-	return 1;
-}
-
-static __inline__ int get_opt_bool(const char *this_opt, const char *name,
-				   bool *ret)
-{
-	if (!ret)
-		return 0;
-
-	if (OPT_EQUAL(this_opt, name)) {
-		if (this_opt[strlen(name)] == '=')
-			*ret = simple_strtoul(this_opt + strlen(name) + 1,
-					      NULL, 0);
-		else
-			*ret = 1;
-	} else {
-		if (OPT_EQUAL(this_opt, "no") && OPT_EQUAL(this_opt + 2, name))
-			*ret = 0;
-		else
-			return 0;
-	}
-	return 1;
-}
-
-static int __init intelfb_setup(char *options)
-{
-	char *this_opt;
-
-	DBG_MSG("intelfb_setup\n");
-
-	if (!options || !*options) {
-		DBG_MSG("no options\n");
-		return 0;
-	} else
-		DBG_MSG("options: %s\n", options);
-
-	/*
-	 * These are the built-in options analogous to the module parameters
-	 * defined above.
-	 *
-	 * The syntax is:
-	 *
-	 *    video=intelfb:[mode][,<param>=<val>] ...
-	 *
-	 * e.g.,
-	 *
-	 *    video=intelfb:1024x768-16@75,accel=0
-	 */
-
-	while ((this_opt = strsep(&options, ","))) {
-		if (!*this_opt)
-			continue;
-		if (get_opt_bool(this_opt, "accel", &accel))
-			;
-		else if (get_opt_int(this_opt, "vram", &vram))
-			;
-		else if (get_opt_bool(this_opt, "hwcursor", &hwcursor))
-			;
-		else if (get_opt_bool(this_opt, "mtrr", &mtrr))
-			;
-		else if (get_opt_bool(this_opt, "fixed", &fixed))
-			;
-		else if (get_opt_bool(this_opt, "init", &noinit))
-			noinit = !noinit;
-		else if (OPT_EQUAL(this_opt, "mode="))
-			mode = get_opt_string(this_opt, "mode=");
-		else
-			mode = this_opt;
-	}
-
-	return 0;
-}
-
-#endif
-
-static int __init intelfb_init(void)
-{
-#ifndef MODULE
-	char *option = NULL;
-#endif
-
-	DBG_MSG("intelfb_init\n");
-
-	INF_MSG("Framebuffer driver for "
-		"Intel(R) " SUPPORTED_CHIPSETS " chipsets\n");
-	INF_MSG("Version " INTELFB_VERSION "\n");
-
-	if (idonly)
-		return -ENODEV;
-
-	if (fb_modesetting_disabled("intelfb"))
-		return -ENODEV;
-
-#ifndef MODULE
-	if (fb_get_options("intelfb", &option))
-		return -ENODEV;
-	intelfb_setup(option);
-#endif
-
-	return pci_register_driver(&intelfb_driver);
-}
-
-static void __exit intelfb_exit(void)
-{
-	DBG_MSG("intelfb_exit\n");
-	pci_unregister_driver(&intelfb_driver);
-}
-
-module_init(intelfb_init);
-module_exit(intelfb_exit);
-
-/***************************************************************
- *                        driver init / cleanup                *
- ***************************************************************/
-
-static void cleanup(struct intelfb_info *dinfo)
-{
-	DBG_MSG("cleanup\n");
-
-	if (!dinfo)
-		return;
-
-	intelfbhw_disable_irq(dinfo);
-
-	fb_dealloc_cmap(&dinfo->info->cmap);
-	kfree(dinfo->info->pixmap.addr);
-
-	if (dinfo->registered)
-		unregister_framebuffer(dinfo->info);
-
-	arch_phys_wc_del(dinfo->wc_cookie);
-
-	if (dinfo->fbmem_gart && dinfo->gtt_fb_mem) {
-		agp_unbind_memory(dinfo->gtt_fb_mem);
-		agp_free_memory(dinfo->gtt_fb_mem);
-	}
-	if (dinfo->gtt_cursor_mem) {
-		agp_unbind_memory(dinfo->gtt_cursor_mem);
-		agp_free_memory(dinfo->gtt_cursor_mem);
-	}
-	if (dinfo->gtt_ring_mem) {
-		agp_unbind_memory(dinfo->gtt_ring_mem);
-		agp_free_memory(dinfo->gtt_ring_mem);
-	}
-
-#ifdef CONFIG_FB_INTEL_I2C
-	/* un-register I2C bus */
-	intelfb_delete_i2c_busses(dinfo);
-#endif
-
-	if (dinfo->mmio_base)
-		iounmap((void __iomem *)dinfo->mmio_base);
-	if (dinfo->aperture.virtual)
-		iounmap((void __iomem *)dinfo->aperture.virtual);
-
-	if (dinfo->flag & INTELFB_MMIO_ACQUIRED)
-		release_mem_region(dinfo->mmio_base_phys, INTEL_REG_SIZE);
-	if (dinfo->flag & INTELFB_FB_ACQUIRED)
-		release_mem_region(dinfo->aperture.physical,
-				   dinfo->aperture.size);
-	framebuffer_release(dinfo->info);
-}
-
-#define bailout(dinfo) do {						\
-	DBG_MSG("bailout\n");						\
-	cleanup(dinfo);							\
-	INF_MSG("Not going to register framebuffer, exiting...\n");	\
-	return -ENODEV;							\
-} while (0)
-
-
-static int intelfb_pci_register(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	struct fb_info *info;
-	struct intelfb_info *dinfo;
-	int i, err, dvo;
-	int aperture_size, stolen_size = 0;
-	struct agp_kern_info gtt_info;
-	int agp_memtype;
-	const char *s;
-	struct agp_bridge_data *bridge;
-	int aperture_bar = 0;
-	int mmio_bar = 1;
-	int offset;
-
-	DBG_MSG("intelfb_pci_register\n");
-
-	err = aperture_remove_conflicting_pci_devices(pdev, "intelfb");
-	if (err)
-		return err;
-
-	num_registered++;
-	if (num_registered != 1) {
-		ERR_MSG("Attempted to register %d devices "
-			"(should be only 1).\n", num_registered);
-		return -ENODEV;
-	}
-
-	info = framebuffer_alloc(sizeof(struct intelfb_info), &pdev->dev);
-	if (!info)
-		return -ENOMEM;
-
-	if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
-		ERR_MSG("Could not allocate cmap for intelfb_info.\n");
-		goto err_out_cmap;
-	}
-
-	dinfo = info->par;
-	dinfo->info  = info;
-	dinfo->fbops = &intel_fb_ops;
-	dinfo->pdev  = pdev;
-
-	/* Reserve pixmap space. */
-	info->pixmap.addr = kzalloc(64 * 1024, GFP_KERNEL);
-	if (info->pixmap.addr == NULL) {
-		ERR_MSG("Cannot reserve pixmap memory.\n");
-		goto err_out_pixmap;
-	}
-
-	/* set early this option because it could be changed by tv encoder
-	   driver */
-	dinfo->fixed_mode = fixed;
-
-	/* Enable device. */
-	if ((err = pci_enable_device(pdev))) {
-		ERR_MSG("Cannot enable device.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	/* Set base addresses. */
-	if ((ent->device == PCI_DEVICE_ID_INTEL_915G) ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_915GM) ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_945G)  ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_945GM) ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_945GME) ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_965G) ||
-	    (ent->device == PCI_DEVICE_ID_INTEL_965GM)) {
-
-		aperture_bar = 2;
-		mmio_bar = 0;
-	}
-	dinfo->aperture.physical = pci_resource_start(pdev, aperture_bar);
-	dinfo->aperture.size     = pci_resource_len(pdev, aperture_bar);
-	dinfo->mmio_base_phys    = pci_resource_start(pdev, mmio_bar);
-	DBG_MSG("fb aperture: 0x%llx/0x%llx, MMIO region: 0x%llx/0x%llx\n",
-		(unsigned long long)pci_resource_start(pdev, aperture_bar),
-		(unsigned long long)pci_resource_len(pdev, aperture_bar),
-		(unsigned long long)pci_resource_start(pdev, mmio_bar),
-		(unsigned long long)pci_resource_len(pdev, mmio_bar));
-
-	/* Reserve the fb and MMIO regions */
-	if (!request_mem_region(dinfo->aperture.physical, dinfo->aperture.size,
-				INTELFB_MODULE_NAME)) {
-		ERR_MSG("Cannot reserve FB region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	dinfo->flag |= INTELFB_FB_ACQUIRED;
-
-	if (!request_mem_region(dinfo->mmio_base_phys,
-				INTEL_REG_SIZE,
-				INTELFB_MODULE_NAME)) {
-		ERR_MSG("Cannot reserve MMIO region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	dinfo->flag |= INTELFB_MMIO_ACQUIRED;
-
-	/* Get the chipset info. */
-	dinfo->pci_chipset = pdev->device;
-
-	if (intelfbhw_get_chipset(pdev, dinfo)) {
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	if (intelfbhw_get_memory(pdev, &aperture_size, &stolen_size)) {
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	INF_MSG("%02x:%02x.%d: %s, aperture size %dMB, "
-		"stolen memory %dkB\n",
-		pdev->bus->number, PCI_SLOT(pdev->devfn),
-		PCI_FUNC(pdev->devfn), dinfo->name,
-		BtoMB(aperture_size), BtoKB(stolen_size));
-
-	/* Set these from the options. */
-	dinfo->accel    = accel;
-	dinfo->hwcursor = hwcursor;
-
-	if (NOACCEL_CHIPSET(dinfo) && dinfo->accel == 1) {
-		INF_MSG("Acceleration is not supported for the %s chipset.\n",
-			dinfo->name);
-		dinfo->accel = 0;
-	}
-
-	/* Framebuffer parameters - Use all the stolen memory if >= vram */
-	if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
-		dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
-		dinfo->fbmem_gart = 0;
-	} else {
-		dinfo->fb.size =  MB(vram);
-		dinfo->fbmem_gart = 1;
-	}
-
-	/* Allocate space for the ring buffer and HW cursor if enabled. */
-	if (dinfo->accel) {
-		dinfo->ring.size = RINGBUFFER_SIZE;
-		dinfo->ring_tail_mask = dinfo->ring.size - 1;
-	}
-	if (dinfo->hwcursor)
-		dinfo->cursor.size = HW_CURSOR_SIZE;
-
-	/* Use agpgart to manage the GATT */
-	if (!(bridge = agp_backend_acquire(pdev))) {
-		ERR_MSG("cannot acquire agp\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	/* get the current gatt info */
-	if (agp_copy_info(bridge, &gtt_info)) {
-		ERR_MSG("cannot get agp info\n");
-		agp_backend_release(bridge);
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	if (MB(voffset) < stolen_size)
-		offset = (stolen_size >> 12);
-	else
-		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
-
-	/* set the mem offsets - set them after the already used pages */
-	if (dinfo->accel)
-		dinfo->ring.offset = offset + gtt_info.current_memory;
-	if (dinfo->hwcursor)
-		dinfo->cursor.offset = offset +
-			+ gtt_info.current_memory + (dinfo->ring.size >> 12);
-	if (dinfo->fbmem_gart)
-		dinfo->fb.offset = offset +
-			+ gtt_info.current_memory + (dinfo->ring.size >> 12)
-			+ (dinfo->cursor.size >> 12);
-
-	/* Allocate memories (which aren't stolen) */
-	/* Map the fb and MMIO regions */
-	/* ioremap only up to the end of used aperture */
-	dinfo->aperture.virtual = (u8 __iomem *)ioremap_wc
-		(dinfo->aperture.physical, ((offset + dinfo->fb.offset) << 12)
-		 + dinfo->fb.size);
-	if (!dinfo->aperture.virtual) {
-		ERR_MSG("Cannot remap FB region.\n");
-		agp_backend_release(bridge);
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	dinfo->mmio_base =
-		(u8 __iomem *)ioremap(dinfo->mmio_base_phys,
-					      INTEL_REG_SIZE);
-	if (!dinfo->mmio_base) {
-		ERR_MSG("Cannot remap MMIO region.\n");
-		agp_backend_release(bridge);
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	if (dinfo->accel) {
-		if (!(dinfo->gtt_ring_mem =
-		      agp_allocate_memory(bridge, dinfo->ring.size >> 12,
-					  AGP_NORMAL_MEMORY))) {
-			ERR_MSG("cannot allocate ring buffer memory\n");
-			agp_backend_release(bridge);
-			cleanup(dinfo);
-			return -ENOMEM;
-		}
-		if (agp_bind_memory(dinfo->gtt_ring_mem,
-				    dinfo->ring.offset)) {
-			ERR_MSG("cannot bind ring buffer memory\n");
-			agp_backend_release(bridge);
-			cleanup(dinfo);
-			return -EBUSY;
-		}
-		dinfo->ring.physical = dinfo->aperture.physical
-			+ (dinfo->ring.offset << 12);
-		dinfo->ring.virtual  = dinfo->aperture.virtual
-			+ (dinfo->ring.offset << 12);
-		dinfo->ring_head = 0;
-	}
-	if (dinfo->hwcursor) {
-		agp_memtype = dinfo->mobile ? AGP_PHYSICAL_MEMORY
-			: AGP_NORMAL_MEMORY;
-		if (!(dinfo->gtt_cursor_mem =
-		      agp_allocate_memory(bridge, dinfo->cursor.size >> 12,
-					  agp_memtype))) {
-			ERR_MSG("cannot allocate cursor memory\n");
-			agp_backend_release(bridge);
-			cleanup(dinfo);
-			return -ENOMEM;
-		}
-		if (agp_bind_memory(dinfo->gtt_cursor_mem,
-				    dinfo->cursor.offset)) {
-			ERR_MSG("cannot bind cursor memory\n");
-			agp_backend_release(bridge);
-			cleanup(dinfo);
-			return -EBUSY;
-		}
-		if (dinfo->mobile)
-			dinfo->cursor.physical
-				= dinfo->gtt_cursor_mem->physical;
-		else
-			dinfo->cursor.physical = dinfo->aperture.physical
-				+ (dinfo->cursor.offset << 12);
-		dinfo->cursor.virtual = dinfo->aperture.virtual
-			+ (dinfo->cursor.offset << 12);
-	}
-	if (dinfo->fbmem_gart) {
-		if (!(dinfo->gtt_fb_mem =
-		      agp_allocate_memory(bridge, dinfo->fb.size >> 12,
-					  AGP_NORMAL_MEMORY))) {
-			WRN_MSG("cannot allocate framebuffer memory - use "
-				"the stolen one\n");
-			dinfo->fbmem_gart = 0;
-		}
-		if (agp_bind_memory(dinfo->gtt_fb_mem,
-				    dinfo->fb.offset)) {
-			WRN_MSG("cannot bind framebuffer memory - use "
-				"the stolen one\n");
-			dinfo->fbmem_gart = 0;
-		}
-	}
-
-	/* update framebuffer memory parameters */
-	if (!dinfo->fbmem_gart)
-		dinfo->fb.offset = 0;   /* starts at offset 0 */
-	dinfo->fb.physical = dinfo->aperture.physical
-		+ (dinfo->fb.offset << 12);
-	dinfo->fb.virtual = dinfo->aperture.virtual + (dinfo->fb.offset << 12);
-	dinfo->fb_start = dinfo->fb.offset << 12;
-
-	/* release agpgart */
-	agp_backend_release(bridge);
-
-	if (mtrr)
-		dinfo->wc_cookie = arch_phys_wc_add(dinfo->aperture.physical,
-						    dinfo->aperture.size);
-
-	DBG_MSG("fb: 0x%x(+ 0x%x)/0x%x (0x%p)\n",
-		dinfo->fb.physical, dinfo->fb.offset, dinfo->fb.size,
-		dinfo->fb.virtual);
-	DBG_MSG("MMIO: 0x%x/0x%x (0x%p)\n",
-		dinfo->mmio_base_phys, INTEL_REG_SIZE,
-		dinfo->mmio_base);
-	DBG_MSG("ring buffer: 0x%x/0x%x (0x%p)\n",
-		dinfo->ring.physical, dinfo->ring.size,
-		dinfo->ring.virtual);
-	DBG_MSG("HW cursor: 0x%x/0x%x (0x%p) (offset 0x%x) (phys 0x%x)\n",
-		dinfo->cursor.physical, dinfo->cursor.size,
-		dinfo->cursor.virtual, dinfo->cursor.offset,
-		dinfo->cursor.physical);
-
-	DBG_MSG("options: vram = %d, accel = %d, hwcursor = %d, fixed = %d, "
-		"noinit = %d\n", vram, accel, hwcursor, fixed, noinit);
-	DBG_MSG("options: mode = \"%s\"\n", mode ? mode : "");
-
-	if (probeonly)
-		bailout(dinfo);
-
-	/*
-	 * Check if the LVDS port or any DVO ports are enabled.  If so,
-	 * don't allow mode switching
-	 */
-	dvo = intelfbhw_check_non_crt(dinfo);
-	if (dvo) {
-		dinfo->fixed_mode = 1;
-		WRN_MSG("Non-CRT device is enabled ( ");
-		i = 0;
-		while (dvo) {
-			if (dvo & 1) {
-				s = intelfbhw_dvo_to_string(1 << i);
-				if (s)
-					printk("%s ", s);
-			}
-			dvo >>= 1;
-			++i;
-		}
-		printk(").  Disabling mode switching.\n");
-	}
-
-	if (bailearly == 1)
-		bailout(dinfo);
-
-	if (FIXED_MODE(dinfo) &&
-	    screen_info.orig_video_isVGA != VIDEO_TYPE_VLFB) {
-		ERR_MSG("Video mode must be programmed at boot time.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	if (bailearly == 2)
-		bailout(dinfo);
-
-	/* Initialise dinfo and related data. */
-	/* If an initial mode was programmed at boot time, get its details. */
-	if (screen_info.orig_video_isVGA == VIDEO_TYPE_VLFB)
-		get_initial_mode(dinfo);
-
-	if (bailearly == 3)
-		bailout(dinfo);
-
-	if (FIXED_MODE(dinfo))	/* remap fb address */
-		update_dinfo(dinfo, &dinfo->initial_var);
-
-	if (bailearly == 4)
-		bailout(dinfo);
-
-
-	if (intelfb_set_fbinfo(dinfo)) {
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	if (bailearly == 5)
-		bailout(dinfo);
-
-#ifdef CONFIG_FB_INTEL_I2C
-	/* register I2C bus */
-	intelfb_create_i2c_busses(dinfo);
-#endif
-
-	if (bailearly == 6)
-		bailout(dinfo);
-
-	pci_set_drvdata(pdev, dinfo);
-
-	/* Save the initial register state. */
-	i = intelfbhw_read_hw_state(dinfo, &dinfo->save_state,
-				    bailearly > 6 ? bailearly - 6 : 0);
-	if (i != 0) {
-		DBG_MSG("intelfbhw_read_hw_state returned %d\n", i);
-		bailout(dinfo);
-	}
-
-	intelfbhw_print_hw_state(dinfo, &dinfo->save_state);
-
-	if (bailearly == 18)
-		bailout(dinfo);
-
-	/* read active pipe */
-	dinfo->pipe = intelfbhw_active_pipe(&dinfo->save_state);
-
-	/* Cursor initialisation */
-	if (dinfo->hwcursor) {
-		intelfbhw_cursor_init(dinfo);
-		intelfbhw_cursor_reset(dinfo);
-	}
-
-	if (bailearly == 19)
-		bailout(dinfo);
-
-	/* 2d acceleration init */
-	if (dinfo->accel)
-		intelfbhw_2d_start(dinfo);
-
-	if (bailearly == 20)
-		bailout(dinfo);
-
-	if (noregister)
-		bailout(dinfo);
-
-	if (register_framebuffer(dinfo->info) < 0) {
-		ERR_MSG("Cannot register framebuffer.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
-	dinfo->registered = 1;
-	dinfo->open = 0;
-
-	init_waitqueue_head(&dinfo->vsync.wait);
-	spin_lock_init(&dinfo->int_lock);
-	dinfo->irq_flags = 0;
-	dinfo->vsync.pan_display = 0;
-	dinfo->vsync.pan_offset = 0;
-
-	return 0;
-
-err_out_pixmap:
-	fb_dealloc_cmap(&info->cmap);
-err_out_cmap:
-	framebuffer_release(info);
-	return -ENODEV;
-}
-
-static void intelfb_pci_unregister(struct pci_dev *pdev)
-{
-	struct intelfb_info *dinfo = pci_get_drvdata(pdev);
-
-	DBG_MSG("intelfb_pci_unregister\n");
-
-	if (!dinfo)
-		return;
-
-	cleanup(dinfo);
-}
-
-/***************************************************************
- *                       helper functions                      *
- ***************************************************************/
-
-__inline__ int intelfb_var_to_depth(const struct fb_var_screeninfo *var)
-{
-	DBG_MSG("intelfb_var_to_depth: bpp: %d, green.length is %d\n",
-		var->bits_per_pixel, var->green.length);
-
-	switch (var->bits_per_pixel) {
-	case 16:
-		return (var->green.length == 6) ? 16 : 15;
-	case 32:
-		return 24;
-	default:
-		return var->bits_per_pixel;
-	}
-}
-
-
-static __inline__ int var_to_refresh(const struct fb_var_screeninfo *var)
-{
-	int xtot = var->xres + var->left_margin + var->right_margin +
-		   var->hsync_len;
-	int ytot = var->yres + var->upper_margin + var->lower_margin +
-		   var->vsync_len;
-
-	return (1000000000 / var->pixclock * 1000 + 500) / xtot / ytot;
-}
-
-/***************************************************************
- *                Various initialisation functions             *
- ***************************************************************/
-
-static void get_initial_mode(struct intelfb_info *dinfo)
-{
-	struct fb_var_screeninfo *var;
-	int xtot, ytot;
-
-	DBG_MSG("get_initial_mode\n");
-
-	dinfo->initial_vga = 1;
-	dinfo->initial_fb_base = screen_info.lfb_base;
-	dinfo->initial_video_ram = screen_info.lfb_size * KB(64);
-	dinfo->initial_pitch = screen_info.lfb_linelength;
-
-	var = &dinfo->initial_var;
-	memset(var, 0, sizeof(*var));
-	var->xres = screen_info.lfb_width;
-	var->yres = screen_info.lfb_height;
-	var->bits_per_pixel = screen_info.lfb_depth;
-	switch (screen_info.lfb_depth) {
-	case 15:
-		var->bits_per_pixel = 16;
-		break;
-	case 24:
-		var->bits_per_pixel = 32;
-		break;
-	}
-
-	DBG_MSG("Initial info: FB is 0x%x/0x%x (%d kByte)\n",
-		dinfo->initial_fb_base, dinfo->initial_video_ram,
-		BtoKB(dinfo->initial_video_ram));
-
-	DBG_MSG("Initial info: mode is %dx%d-%d (%d)\n",
-		var->xres, var->yres, var->bits_per_pixel,
-		dinfo->initial_pitch);
-
-	/* Dummy timing values (assume 60Hz) */
-	var->left_margin = (var->xres / 8) & 0xf8;
-	var->right_margin = 32;
-	var->upper_margin = 16;
-	var->lower_margin = 4;
-	var->hsync_len = (var->xres / 8) & 0xf8;
-	var->vsync_len = 4;
-
-	xtot = var->xres + var->left_margin +
-		var->right_margin + var->hsync_len;
-	ytot = var->yres + var->upper_margin +
-		var->lower_margin + var->vsync_len;
-	var->pixclock = 10000000 / xtot * 1000 / ytot * 100 / 60;
-
-	var->height = -1;
-	var->width = -1;
-
-	if (var->bits_per_pixel > 8) {
-		var->red.offset = screen_info.red_pos;
-		var->red.length = screen_info.red_size;
-		var->green.offset = screen_info.green_pos;
-		var->green.length = screen_info.green_size;
-		var->blue.offset = screen_info.blue_pos;
-		var->blue.length = screen_info.blue_size;
-		var->transp.offset = screen_info.rsvd_pos;
-		var->transp.length = screen_info.rsvd_size;
-	} else {
-		var->red.length = 8;
-		var->green.length = 8;
-		var->blue.length = 8;
-	}
-}
-
-static int intelfb_init_var(struct intelfb_info *dinfo)
-{
-	struct fb_var_screeninfo *var;
-	int msrc = 0;
-
-	DBG_MSG("intelfb_init_var\n");
-
-	var = &dinfo->info->var;
-	if (FIXED_MODE(dinfo)) {
-	        memcpy(var, &dinfo->initial_var,
-		       sizeof(struct fb_var_screeninfo));
-		msrc = 5;
-	} else {
-		const u8 *edid_s = fb_firmware_edid(&dinfo->pdev->dev);
-		u8 *edid_d = NULL;
-
-		if (edid_s) {
-			edid_d = kmemdup(edid_s, EDID_LENGTH, GFP_KERNEL);
-
-			if (edid_d) {
-				fb_edid_to_monspecs(edid_d,
-						    &dinfo->info->monspecs);
-				kfree(edid_d);
-			}
-		}
-
-		if (mode) {
-			printk("intelfb: Looking for mode in private "
-			       "database\n");
-			msrc = fb_find_mode(var, dinfo->info, mode,
-					    dinfo->info->monspecs.modedb,
-					    dinfo->info->monspecs.modedb_len,
-					    NULL, 0);
-
-			if (msrc && msrc > 1) {
-				printk("intelfb: No mode in private database, "
-				       "intelfb: looking for mode in global "
-				       "database ");
-				msrc = fb_find_mode(var, dinfo->info, mode,
-						    NULL, 0, NULL, 0);
-
-				if (msrc)
-					msrc |= 8;
-			}
-
-		}
-
-		if (!msrc)
-			msrc = fb_find_mode(var, dinfo->info, PREFERRED_MODE,
-					    NULL, 0, NULL, 0);
-	}
-
-	if (!msrc) {
-		ERR_MSG("Cannot find a suitable video mode.\n");
-		return 1;
-	}
-
-	INF_MSG("Initial video mode is %dx%d-%d@%d.\n", var->xres, var->yres,
-		var->bits_per_pixel, var_to_refresh(var));
-
-	DBG_MSG("Initial video mode is from %d.\n", msrc);
-
-#if ALLOCATE_FOR_PANNING
-	/* Allow use of half of the video ram for panning */
-	var->xres_virtual = var->xres;
-	var->yres_virtual =
-		dinfo->fb.size / 2 / (var->bits_per_pixel * var->xres);
-	if (var->yres_virtual < var->yres)
-		var->yres_virtual = var->yres;
-#else
-	var->yres_virtual = var->yres;
-#endif
-
-	if (dinfo->accel)
-		var->accel_flags |= FB_ACCELF_TEXT;
-	else
-		var->accel_flags &= ~FB_ACCELF_TEXT;
-
-	return 0;
-}
-
-static int intelfb_set_fbinfo(struct intelfb_info *dinfo)
-{
-	struct fb_info *info = dinfo->info;
-
-	DBG_MSG("intelfb_set_fbinfo\n");
-
-	info->fbops = &intel_fb_ops;
-	info->pseudo_palette = dinfo->pseudo_palette;
-
-	info->pixmap.size = 64*1024;
-	info->pixmap.buf_align = 8;
-	info->pixmap.access_align = 32;
-	info->pixmap.flags = FB_PIXMAP_SYSTEM;
-
-	if (intelfb_init_var(dinfo))
-		return 1;
-
-	info->pixmap.scan_align = 1;
-	strcpy(info->fix.id, dinfo->name);
-	info->fix.smem_start = dinfo->fb.physical;
-	info->fix.smem_len = dinfo->fb.size;
-	info->fix.type = FB_TYPE_PACKED_PIXELS;
-	info->fix.type_aux = 0;
-	info->fix.xpanstep = 8;
-	info->fix.ypanstep = 1;
-	info->fix.ywrapstep = 0;
-	info->fix.mmio_start = dinfo->mmio_base_phys;
-	info->fix.mmio_len = INTEL_REG_SIZE;
-	info->fix.accel = FB_ACCEL_I830;
-	update_dinfo(dinfo, &info->var);
-
-	return 0;
-}
-
-/* Update dinfo to match the active video mode. */
-static void update_dinfo(struct intelfb_info *dinfo,
-			 struct fb_var_screeninfo *var)
-{
-	DBG_MSG("update_dinfo\n");
-
-	dinfo->bpp = var->bits_per_pixel;
-	dinfo->depth = intelfb_var_to_depth(var);
-	dinfo->xres = var->xres;
-	dinfo->yres = var->xres;
-	dinfo->pixclock = var->pixclock;
-
-	dinfo->info->fix.visual = dinfo->visual;
-	dinfo->info->fix.line_length = dinfo->pitch;
-
-	switch (dinfo->bpp) {
-	case 8:
-		dinfo->visual = FB_VISUAL_PSEUDOCOLOR;
-		dinfo->pitch = var->xres_virtual;
-		break;
-	case 16:
-		dinfo->visual = FB_VISUAL_TRUECOLOR;
-		dinfo->pitch = var->xres_virtual * 2;
-		break;
-	case 32:
-		dinfo->visual = FB_VISUAL_TRUECOLOR;
-		dinfo->pitch = var->xres_virtual * 4;
-		break;
-	}
-
-	/* Make sure the line length is a aligned correctly. */
-	if (IS_I9XX(dinfo))
-		dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT_I9XX);
-	else
-		dinfo->pitch = ROUND_UP_TO(dinfo->pitch, STRIDE_ALIGNMENT);
-
-	if (FIXED_MODE(dinfo))
-		dinfo->pitch = dinfo->initial_pitch;
-
-	dinfo->info->screen_base = (char __iomem *)dinfo->fb.virtual;
-	dinfo->info->fix.line_length = dinfo->pitch;
-	dinfo->info->fix.visual = dinfo->visual;
-}
-
-/* fbops functions */
-
-/***************************************************************
- *                       fbdev interface                       *
- ***************************************************************/
-
-static int intelfb_open(struct fb_info *info, int user)
-{
-	struct intelfb_info *dinfo = GET_DINFO(info);
-
-	if (user)
-		dinfo->open++;
-
-	return 0;
-}
-
-static int intelfb_release(struct fb_info *info, int user)
-{
-	struct intelfb_info *dinfo = GET_DINFO(info);
-
-	if (user) {
-		dinfo->open--;
-		msleep(1);
-		if (!dinfo->open)
-			intelfbhw_disable_irq(dinfo);
-	}
-
-	return 0;
-}
-
-static int intelfb_check_var(struct fb_var_screeninfo *var,
-			     struct fb_info *info)
-{
-	int change_var = 0;
-	struct fb_var_screeninfo v;
-	struct intelfb_info *dinfo;
-	static int first = 1;
-	int i;
-	/* Good pitches to allow tiling.  Don't care about pitches < 1024. */
-	static const int pitches[] = {
-		128 * 8,
-		128 * 16,
-		128 * 32,
-		128 * 64,
-		0
-	};
-
-	DBG_MSG("intelfb_check_var: accel_flags is %d\n", var->accel_flags);
-
-	dinfo = GET_DINFO(info);
-
-	if (!var->pixclock)
-		return -EINVAL;
-
-	/* update the pitch */
-	if (intelfbhw_validate_mode(dinfo, var) != 0)
-		return -EINVAL;
-
-	v = *var;
-
-	for (i = 0; pitches[i] != 0; i++) {
-		if (pitches[i] >= v.xres_virtual) {
-			v.xres_virtual = pitches[i];
-			break;
-		}
-	}
-
-	/* Check for a supported bpp. */
-	if (v.bits_per_pixel <= 8)
-		v.bits_per_pixel = 8;
-	else if (v.bits_per_pixel <= 16) {
-		if (v.bits_per_pixel == 16)
-			v.green.length = 6;
-		v.bits_per_pixel = 16;
-	} else if (v.bits_per_pixel <= 32)
-		v.bits_per_pixel = 32;
-	else
-		return -EINVAL;
-
-	change_var = ((info->var.xres != var->xres) ||
-		      (info->var.yres != var->yres) ||
-		      (info->var.xres_virtual != var->xres_virtual) ||
-		      (info->var.yres_virtual != var->yres_virtual) ||
-		      (info->var.bits_per_pixel != var->bits_per_pixel) ||
-		      memcmp(&info->var.red, &var->red, sizeof(var->red)) ||
-		      memcmp(&info->var.green, &var->green,
-			     sizeof(var->green)) ||
-		      memcmp(&info->var.blue, &var->blue, sizeof(var->blue)));
-
-	if (FIXED_MODE(dinfo) &&
-	    (change_var ||
-	     var->yres_virtual > dinfo->initial_var.yres_virtual ||
-	     var->yres_virtual < dinfo->initial_var.yres ||
-	     var->xoffset || var->nonstd)) {
-		if (first) {
-			ERR_MSG("Changing the video mode is not supported.\n");
-			first = 0;
-		}
-		return -EINVAL;
-	}
-
-	switch (intelfb_var_to_depth(&v)) {
-	case 8:
-		v.red.offset = v.green.offset = v.blue.offset = 0;
-		v.red.length = v.green.length = v.blue.length = 8;
-		v.transp.offset = v.transp.length = 0;
-		break;
-	case 15:
-		v.red.offset = 10;
-		v.green.offset = 5;
-		v.blue.offset = 0;
-		v.red.length = v.green.length = v.blue.length = 5;
-		v.transp.offset = v.transp.length = 0;
-		break;
-	case 16:
-		v.red.offset = 11;
-		v.green.offset = 5;
-		v.blue.offset = 0;
-		v.red.length = 5;
-		v.green.length = 6;
-		v.blue.length = 5;
-		v.transp.offset = v.transp.length = 0;
-		break;
-	case 24:
-		v.red.offset = 16;
-		v.green.offset = 8;
-		v.blue.offset = 0;
-		v.red.length = v.green.length = v.blue.length = 8;
-		v.transp.offset = v.transp.length = 0;
-		break;
-	case 32:
-		v.red.offset = 16;
-		v.green.offset = 8;
-		v.blue.offset = 0;
-		v.red.length = v.green.length = v.blue.length = 8;
-		v.transp.offset = 24;
-		v.transp.length = 8;
-		break;
-	}
-
-	if (v.xoffset > v.xres_virtual - v.xres)
-		v.xoffset = v.xres_virtual - v.xres;
-	if (v.yoffset > v.yres_virtual - v.yres)
-		v.yoffset = v.yres_virtual - v.yres;
-
-	v.red.msb_right = v.green.msb_right = v.blue.msb_right =
-			  v.transp.msb_right = 0;
-
-        *var = v;
-
-	return 0;
-}
-
-static int intelfb_set_par(struct fb_info *info)
-{
-	struct intelfb_hwstate *hw;
-        struct intelfb_info *dinfo = GET_DINFO(info);
-
-	if (FIXED_MODE(dinfo)) {
-		ERR_MSG("Changing the video mode is not supported.\n");
-		return -EINVAL;
-	}
-
-	hw = kmalloc(sizeof(*hw), GFP_ATOMIC);
-	if (!hw)
-		return -ENOMEM;
-
-	DBG_MSG("intelfb_set_par (%dx%d-%d)\n", info->var.xres,
-		info->var.yres, info->var.bits_per_pixel);
-
-	/*
-	 * Disable VCO prior to timing register change.
-	 */
-	OUTREG(DPLL_A, INREG(DPLL_A) & ~DPLL_VCO_ENABLE);
-
-	intelfb_blank(FB_BLANK_POWERDOWN, info);
-
-	if (ACCEL(dinfo, info))
-		intelfbhw_2d_stop(dinfo);
-
-	memcpy(hw, &dinfo->save_state, sizeof(*hw));
-	if (intelfbhw_mode_to_hw(dinfo, hw, &info->var))
-		goto invalid_mode;
-	if (intelfbhw_program_mode(dinfo, hw, 0))
-		goto invalid_mode;
-
-#if REGDUMP > 0
-	intelfbhw_read_hw_state(dinfo, hw, 0);
-	intelfbhw_print_hw_state(dinfo, hw);
-#endif
-
-	update_dinfo(dinfo, &info->var);
-
-	if (ACCEL(dinfo, info))
-		intelfbhw_2d_start(dinfo);
-
-	intelfb_pan_display(&info->var, info);
-
-	intelfb_blank(FB_BLANK_UNBLANK, info);
-
-	if (ACCEL(dinfo, info)) {
-		info->flags = FBINFO_HWACCEL_YPAN |
-		FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
-		FBINFO_HWACCEL_IMAGEBLIT;
-	} else
-		info->flags = FBINFO_HWACCEL_YPAN;
-
-	kfree(hw);
-	return 0;
-invalid_mode:
-	kfree(hw);
-	return -EINVAL;
-}
-
-static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
-			     unsigned blue, unsigned transp,
-			     struct fb_info *info)
-{
-	struct intelfb_info *dinfo = GET_DINFO(info);
-
-#if VERBOSE > 0
-	DBG_MSG("intelfb_setcolreg: regno %d, depth %d\n", regno, dinfo->depth);
-#endif
-
-	if (regno > 255)
-		return 1;
-
-	if (dinfo->depth == 8) {
-		red >>= 8;
-		green >>= 8;
-		blue >>= 8;
-
-		intelfbhw_setcolreg(dinfo, regno, red, green, blue,
-				    transp);
-	}
-
-	if (regno < 16) {
-		switch (dinfo->depth) {
-		case 15:
-			dinfo->pseudo_palette[regno] = ((red & 0xf800) >>  1) |
-				((green & 0xf800) >>  6) |
-				((blue & 0xf800) >> 11);
-			break;
-		case 16:
-			dinfo->pseudo_palette[regno] = (red & 0xf800) |
-				((green & 0xfc00) >>  5) |
-				((blue  & 0xf800) >> 11);
-			break;
-		case 24:
-			dinfo->pseudo_palette[regno] = ((red & 0xff00) << 8) |
-				(green & 0xff00) |
-				((blue  & 0xff00) >> 8);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int intelfb_blank(int blank, struct fb_info *info)
-{
-	intelfbhw_do_blank(blank, info);
-	return 0;
-}
-
-static int intelfb_pan_display(struct fb_var_screeninfo *var,
-			       struct fb_info *info)
-{
-	intelfbhw_pan_display(var, info);
-	return 0;
-}
-
-/* When/if we have our own ioctls. */
-static int intelfb_ioctl(struct fb_info *info, unsigned int cmd,
-			 unsigned long arg)
-{
-	int retval = 0;
-	struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 pipe = 0;
-
-	switch (cmd) {
-		case FBIO_WAITFORVSYNC:
-			if (get_user(pipe, (__u32 __user *)arg))
-				return -EFAULT;
-
-			retval = intelfbhw_wait_for_vsync(dinfo, pipe);
-			break;
-		default:
-			break;
-	}
-
-	return retval;
-}
-
-static void intelfb_fillrect (struct fb_info *info,
-			      const struct fb_fillrect *rect)
-{
-        struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 rop, color;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfb_fillrect\n");
-#endif
-
-	if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
-		cfb_fillrect(info, rect);
-		return;
-	}
-
-	if (rect->rop == ROP_COPY)
-		rop = PAT_ROP_GXCOPY;
-	else /* ROP_XOR */
-		rop = PAT_ROP_GXXOR;
-
-	if (dinfo->depth != 8)
-		color = dinfo->pseudo_palette[rect->color];
-	else
-		color = rect->color;
-
-	intelfbhw_do_fillrect(dinfo, rect->dx, rect->dy,
-			      rect->width, rect->height, color,
-			      dinfo->pitch, info->var.bits_per_pixel,
-			      rop);
-}
-
-static void intelfb_copyarea(struct fb_info *info,
-			     const struct fb_copyarea *region)
-{
-        struct intelfb_info *dinfo = GET_DINFO(info);
-
-#if VERBOSE > 0
-	DBG_MSG("intelfb_copyarea\n");
-#endif
-
-	if (!ACCEL(dinfo, info) || dinfo->depth == 4) {
-		cfb_copyarea(info, region);
-		return;
-	}
-
-	intelfbhw_do_bitblt(dinfo, region->sx, region->sy, region->dx,
-			    region->dy, region->width, region->height,
-			    dinfo->pitch, info->var.bits_per_pixel);
-}
-
-static void intelfb_imageblit(struct fb_info *info,
-			      const struct fb_image *image)
-{
-        struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 fgcolor, bgcolor;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfb_imageblit\n");
-#endif
-
-	if (!ACCEL(dinfo, info) || dinfo->depth == 4
-	    || image->depth != 1) {
-		cfb_imageblit(info, image);
-		return;
-	}
-
-	if (dinfo->depth != 8) {
-		fgcolor = dinfo->pseudo_palette[image->fg_color];
-		bgcolor = dinfo->pseudo_palette[image->bg_color];
-	} else {
-		fgcolor = image->fg_color;
-		bgcolor = image->bg_color;
-	}
-
-	if (!intelfbhw_do_drawglyph(dinfo, fgcolor, bgcolor, image->width,
-				    image->height, image->data,
-				    image->dx, image->dy,
-				    dinfo->pitch, info->var.bits_per_pixel)) {
-		cfb_imageblit(info, image);
-		return;
-	}
-}
-
-static int intelfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
-        struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 physical;
-#if VERBOSE > 0
-	DBG_MSG("intelfb_cursor\n");
-#endif
-
-	if (!dinfo->hwcursor)
-		return -ENODEV;
-
-	intelfbhw_cursor_hide(dinfo);
-
-	/* If XFree killed the cursor - restore it */
-	physical = (dinfo->mobile || IS_I9XX(dinfo)) ? dinfo->cursor.physical :
-		   (dinfo->cursor.offset << 12);
-
-	if (INREG(CURSOR_A_BASEADDR) != physical) {
-		u32 fg, bg;
-
-		DBG_MSG("the cursor was killed - restore it !!\n");
-		DBG_MSG("size %d, %d   pos %d, %d\n",
-			cursor->image.width, cursor->image.height,
-			cursor->image.dx, cursor->image.dy);
-
-		intelfbhw_cursor_init(dinfo);
-		intelfbhw_cursor_reset(dinfo);
-		intelfbhw_cursor_setpos(dinfo, cursor->image.dx,
-					cursor->image.dy);
-
-		if (dinfo->depth != 8) {
-			fg =dinfo->pseudo_palette[cursor->image.fg_color];
-			bg =dinfo->pseudo_palette[cursor->image.bg_color];
-		} else {
-			fg = cursor->image.fg_color;
-			bg = cursor->image.bg_color;
-		}
-		intelfbhw_cursor_setcolor(dinfo, bg, fg);
-		intelfbhw_cursor_load(dinfo, cursor->image.width,
-				      cursor->image.height,
-				      dinfo->cursor_src);
-
-		if (cursor->enable)
-			intelfbhw_cursor_show(dinfo);
-		return 0;
-	}
-
-	if (cursor->set & FB_CUR_SETPOS) {
-		u32 dx, dy;
-
-		dx = cursor->image.dx - info->var.xoffset;
-		dy = cursor->image.dy - info->var.yoffset;
-
-		intelfbhw_cursor_setpos(dinfo, dx, dy);
-	}
-
-	if (cursor->set & FB_CUR_SETSIZE) {
-		if (cursor->image.width > 64 || cursor->image.height > 64)
-			return -ENXIO;
-
-		intelfbhw_cursor_reset(dinfo);
-	}
-
-	if (cursor->set & FB_CUR_SETCMAP) {
-		u32 fg, bg;
-
-		if (dinfo->depth != 8) {
-			fg = dinfo->pseudo_palette[cursor->image.fg_color];
-			bg = dinfo->pseudo_palette[cursor->image.bg_color];
-		} else {
-			fg = cursor->image.fg_color;
-			bg = cursor->image.bg_color;
-		}
-
-		intelfbhw_cursor_setcolor(dinfo, bg, fg);
-	}
-
-	if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
-		u32 s_pitch = (ROUND_UP_TO(cursor->image.width, 8) / 8);
-		u32 size = s_pitch * cursor->image.height;
-		u8 *dat = (u8 *) cursor->image.data;
-		u8 *msk = (u8 *) cursor->mask;
-		u8 src[64];
-		u32 i;
-
-		if (cursor->image.depth != 1)
-			return -ENXIO;
-
-		switch (cursor->rop) {
-		case ROP_XOR:
-			for (i = 0; i < size; i++)
-				src[i] = dat[i] ^ msk[i];
-			break;
-		case ROP_COPY:
-		default:
-			for (i = 0; i < size; i++)
-				src[i] = dat[i] & msk[i];
-			break;
-		}
-
-		/* save the bitmap to restore it when XFree will
-		   make the cursor dirty */
-		memcpy(dinfo->cursor_src, src, size);
-
-		intelfbhw_cursor_load(dinfo, cursor->image.width,
-				      cursor->image.height, src);
-	}
-
-	if (cursor->enable)
-		intelfbhw_cursor_show(dinfo);
-
-	return 0;
-}
-
-static int intelfb_sync(struct fb_info *info)
-{
-        struct intelfb_info *dinfo = GET_DINFO(info);
-
-#if VERBOSE > 0
-	DBG_MSG("intelfb_sync\n");
-#endif
-
-	if (dinfo->ring_lockup)
-		return 0;
-
-	intelfbhw_do_sync(dinfo);
-	return 0;
-}
-
diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
deleted file mode 100644
index 2086e06532ee..000000000000
--- a/drivers/video/fbdev/intelfb/intelfbhw.c
+++ /dev/null
@@ -1,2115 +0,0 @@
-/*
- * intelfb
- *
- * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
- *
- * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
- *                   2004 Sylvain Meyer
- *
- * This driver consists of two parts.  The first part (intelfbdrv.c) provides
- * the basic fbdev interfaces, is derived in part from the radeonfb and
- * vesafb drivers, and is covered by the GPL.  The second part (intelfbhw.c)
- * provides the code to program the hardware.  Most of it is derived from
- * the i810/i830 XFree86 driver.  The HW-specific code is covered here
- * under a dual license (GPL and MIT/XFree86 license).
- *
- * Author: David Dawes
- *
- */
-
-/* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-
-#include "intelfb.h"
-#include "intelfbhw.h"
-
-struct pll_min_max {
-	int min_m, max_m, min_m1, max_m1;
-	int min_m2, max_m2, min_n, max_n;
-	int min_p, max_p, min_p1, max_p1;
-	int min_vco, max_vco, p_transition_clk, ref_clk;
-	int p_inc_lo, p_inc_hi;
-};
-
-#define PLLS_I8xx 0
-#define PLLS_I9xx 1
-#define PLLS_MAX 2
-
-static struct pll_min_max plls[PLLS_MAX] = {
-	{ 108, 140, 18, 26,
-	  6, 16, 3, 16,
-	  4, 128, 0, 31,
-	  930000, 1400000, 165000, 48000,
-	  4, 2 },		/* I8xx */
-
-	{ 75, 120, 10, 20,
-	  5, 9, 4, 7,
-	  5, 80, 1, 8,
-	  1400000, 2800000, 200000, 96000,
-	  10, 5 }		/* I9xx */
-};
-
-int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
-{
-	u32 tmp;
-	if (!pdev || !dinfo)
-		return 1;
-
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_INTEL_830M:
-		dinfo->name = "Intel(R) 830M";
-		dinfo->chipset = INTEL_830M;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I8xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_845G:
-		dinfo->name = "Intel(R) 845G";
-		dinfo->chipset = INTEL_845G;
-		dinfo->mobile = 0;
-		dinfo->pll_index = PLLS_I8xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_854:
-		dinfo->mobile = 1;
-		dinfo->name = "Intel(R) 854";
-		dinfo->chipset = INTEL_854;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_85XGM:
-		tmp = 0;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I8xx;
-		pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
-		switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
-			INTEL_85X_VARIANT_MASK) {
-		case INTEL_VAR_855GME:
-			dinfo->name = "Intel(R) 855GME";
-			dinfo->chipset = INTEL_855GME;
-			return 0;
-		case INTEL_VAR_855GM:
-			dinfo->name = "Intel(R) 855GM";
-			dinfo->chipset = INTEL_855GM;
-			return 0;
-		case INTEL_VAR_852GME:
-			dinfo->name = "Intel(R) 852GME";
-			dinfo->chipset = INTEL_852GME;
-			return 0;
-		case INTEL_VAR_852GM:
-			dinfo->name = "Intel(R) 852GM";
-			dinfo->chipset = INTEL_852GM;
-			return 0;
-		default:
-			dinfo->name = "Intel(R) 852GM/855GM";
-			dinfo->chipset = INTEL_85XGM;
-			return 0;
-		}
-		break;
-	case PCI_DEVICE_ID_INTEL_865G:
-		dinfo->name = "Intel(R) 865G";
-		dinfo->chipset = INTEL_865G;
-		dinfo->mobile = 0;
-		dinfo->pll_index = PLLS_I8xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_915G:
-		dinfo->name = "Intel(R) 915G";
-		dinfo->chipset = INTEL_915G;
-		dinfo->mobile = 0;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_915GM:
-		dinfo->name = "Intel(R) 915GM";
-		dinfo->chipset = INTEL_915GM;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_945G:
-		dinfo->name = "Intel(R) 945G";
-		dinfo->chipset = INTEL_945G;
-		dinfo->mobile = 0;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_945GM:
-		dinfo->name = "Intel(R) 945GM";
-		dinfo->chipset = INTEL_945GM;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_945GME:
-		dinfo->name = "Intel(R) 945GME";
-		dinfo->chipset = INTEL_945GME;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_965G:
-		dinfo->name = "Intel(R) 965G";
-		dinfo->chipset = INTEL_965G;
-		dinfo->mobile = 0;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	case PCI_DEVICE_ID_INTEL_965GM:
-		dinfo->name = "Intel(R) 965GM";
-		dinfo->chipset = INTEL_965GM;
-		dinfo->mobile = 1;
-		dinfo->pll_index = PLLS_I9xx;
-		return 0;
-	default:
-		return 1;
-	}
-}
-
-int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
-			 int *stolen_size)
-{
-	struct pci_dev *bridge_dev;
-	u16 tmp;
-	int stolen_overhead;
-
-	if (!pdev || !aperture_size || !stolen_size)
-		return 1;
-
-	/* Find the bridge device.  It is always 0:0.0 */
-	bridge_dev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
-						 PCI_DEVFN(0, 0));
-	if (!bridge_dev) {
-		ERR_MSG("cannot find bridge device\n");
-		return 1;
-	}
-
-	/* Get the fb aperture size and "stolen" memory amount. */
-	tmp = 0;
-	pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
-	pci_dev_put(bridge_dev);
-
-	switch (pdev->device) {
-	case PCI_DEVICE_ID_INTEL_915G:
-	case PCI_DEVICE_ID_INTEL_915GM:
-	case PCI_DEVICE_ID_INTEL_945G:
-	case PCI_DEVICE_ID_INTEL_945GM:
-	case PCI_DEVICE_ID_INTEL_945GME:
-	case PCI_DEVICE_ID_INTEL_965G:
-	case PCI_DEVICE_ID_INTEL_965GM:
-		/*
-		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
-		 * aperture. Determine size from PCI resource length.
-		 */
-		*aperture_size = pci_resource_len(pdev, 2);
-		break;
-	default:
-		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
-			*aperture_size = MB(64);
-		else
-			*aperture_size = MB(128);
-		break;
-	}
-
-	/* Stolen memory size is reduced by the GTT and the popup.
-	   GTT is 1K per MB of aperture size, and popup is 4K. */
-	stolen_overhead = (*aperture_size / MB(1)) + 4;
-	switch(pdev->device) {
-	case PCI_DEVICE_ID_INTEL_830M:
-	case PCI_DEVICE_ID_INTEL_845G:
-		switch (tmp & INTEL_830_GMCH_GMS_MASK) {
-		case INTEL_830_GMCH_GMS_STOLEN_512:
-			*stolen_size = KB(512) - KB(stolen_overhead);
-			return 0;
-		case INTEL_830_GMCH_GMS_STOLEN_1024:
-			*stolen_size = MB(1) - KB(stolen_overhead);
-			return 0;
-		case INTEL_830_GMCH_GMS_STOLEN_8192:
-			*stolen_size = MB(8) - KB(stolen_overhead);
-			return 0;
-		case INTEL_830_GMCH_GMS_LOCAL:
-			ERR_MSG("only local memory found\n");
-			return 1;
-		case INTEL_830_GMCH_GMS_DISABLED:
-			ERR_MSG("video memory is disabled\n");
-			return 1;
-		default:
-			ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
-				tmp & INTEL_830_GMCH_GMS_MASK);
-			return 1;
-		}
-		break;
-	default:
-		switch (tmp & INTEL_855_GMCH_GMS_MASK) {
-		case INTEL_855_GMCH_GMS_STOLEN_1M:
-			*stolen_size = MB(1) - KB(stolen_overhead);
-			return 0;
-		case INTEL_855_GMCH_GMS_STOLEN_4M:
-			*stolen_size = MB(4) - KB(stolen_overhead);
-			return 0;
-		case INTEL_855_GMCH_GMS_STOLEN_8M:
-			*stolen_size = MB(8) - KB(stolen_overhead);
-			return 0;
-		case INTEL_855_GMCH_GMS_STOLEN_16M:
-			*stolen_size = MB(16) - KB(stolen_overhead);
-			return 0;
-		case INTEL_855_GMCH_GMS_STOLEN_32M:
-			*stolen_size = MB(32) - KB(stolen_overhead);
-			return 0;
-		case INTEL_915G_GMCH_GMS_STOLEN_48M:
-			*stolen_size = MB(48) - KB(stolen_overhead);
-			return 0;
-		case INTEL_915G_GMCH_GMS_STOLEN_64M:
-			*stolen_size = MB(64) - KB(stolen_overhead);
-			return 0;
-		case INTEL_855_GMCH_GMS_DISABLED:
-			ERR_MSG("video memory is disabled\n");
-			return 0;
-		default:
-			ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
-				tmp & INTEL_855_GMCH_GMS_MASK);
-			return 1;
-		}
-	}
-}
-
-int intelfbhw_check_non_crt(struct intelfb_info *dinfo)
-{
-	int dvo = 0;
-
-	if (INREG(LVDS) & PORT_ENABLE)
-		dvo |= LVDS_PORT;
-	if (INREG(DVOA) & PORT_ENABLE)
-		dvo |= DVOA_PORT;
-	if (INREG(DVOB) & PORT_ENABLE)
-		dvo |= DVOB_PORT;
-	if (INREG(DVOC) & PORT_ENABLE)
-		dvo |= DVOC_PORT;
-
-	return dvo;
-}
-
-const char * intelfbhw_dvo_to_string(int dvo)
-{
-	if (dvo & DVOA_PORT)
-		return "DVO port A";
-	else if (dvo & DVOB_PORT)
-		return "DVO port B";
-	else if (dvo & DVOC_PORT)
-		return "DVO port C";
-	else if (dvo & LVDS_PORT)
-		return "LVDS port";
-	else
-		return NULL;
-}
-
-
-int intelfbhw_validate_mode(struct intelfb_info *dinfo,
-			    struct fb_var_screeninfo *var)
-{
-	int bytes_per_pixel;
-	int tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_validate_mode\n");
-#endif
-
-	bytes_per_pixel = var->bits_per_pixel / 8;
-	if (bytes_per_pixel == 3)
-		bytes_per_pixel = 4;
-
-	/* Check if enough video memory. */
-	tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
-	if (tmp > dinfo->fb.size) {
-		WRN_MSG("Not enough video ram for mode "
-			"(%d KByte vs %d KByte).\n",
-			BtoKB(tmp), BtoKB(dinfo->fb.size));
-		return 1;
-	}
-
-	/* Check if x/y limits are OK. */
-	if (var->xres - 1 > HACTIVE_MASK) {
-		WRN_MSG("X resolution too large (%d vs %d).\n",
-			var->xres, HACTIVE_MASK + 1);
-		return 1;
-	}
-	if (var->yres - 1 > VACTIVE_MASK) {
-		WRN_MSG("Y resolution too large (%d vs %d).\n",
-			var->yres, VACTIVE_MASK + 1);
-		return 1;
-	}
-	if (var->xres < 4) {
-		WRN_MSG("X resolution too small (%d vs 4).\n", var->xres);
-		return 1;
-	}
-	if (var->yres < 4) {
-		WRN_MSG("Y resolution too small (%d vs 4).\n", var->yres);
-		return 1;
-	}
-
-	/* Check for doublescan modes. */
-	if (var->vmode & FB_VMODE_DOUBLE) {
-		WRN_MSG("Mode is double-scan.\n");
-		return 1;
-	}
-
-	if ((var->vmode & FB_VMODE_INTERLACED) && (var->yres & 1)) {
-		WRN_MSG("Odd number of lines in interlaced mode\n");
-		return 1;
-	}
-
-	/* Check if clock is OK. */
-	tmp = 1000000000 / var->pixclock;
-	if (tmp < MIN_CLOCK) {
-		WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
-			(tmp + 500) / 1000, MIN_CLOCK / 1000);
-		return 1;
-	}
-	if (tmp > MAX_CLOCK) {
-		WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
-			(tmp + 500) / 1000, MAX_CLOCK / 1000);
-		return 1;
-	}
-
-	return 0;
-}
-
-int intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
-{
-	struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 offset, xoffset, yoffset;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_pan_display\n");
-#endif
-
-	xoffset = ROUND_DOWN_TO(var->xoffset, 8);
-	yoffset = var->yoffset;
-
-	if ((xoffset + info->var.xres > info->var.xres_virtual) ||
-	    (yoffset + info->var.yres > info->var.yres_virtual))
-		return -EINVAL;
-
-	offset = (yoffset * dinfo->pitch) +
-		 (xoffset * info->var.bits_per_pixel) / 8;
-
-	offset += dinfo->fb.offset << 12;
-
-	dinfo->vsync.pan_offset = offset;
-	if ((var->activate & FB_ACTIVATE_VBL) &&
-	    !intelfbhw_enable_irq(dinfo))
-		dinfo->vsync.pan_display = 1;
-	else {
-		dinfo->vsync.pan_display = 0;
-		OUTREG(DSPABASE, offset);
-	}
-
-	return 0;
-}
-
-/* Blank the screen. */
-void intelfbhw_do_blank(int blank, struct fb_info *info)
-{
-	struct intelfb_info *dinfo = GET_DINFO(info);
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
-#endif
-
-	/* Turn plane A on or off */
-	tmp = INREG(DSPACNTR);
-	if (blank)
-		tmp &= ~DISPPLANE_PLANE_ENABLE;
-	else
-		tmp |= DISPPLANE_PLANE_ENABLE;
-	OUTREG(DSPACNTR, tmp);
-	/* Flush */
-	tmp = INREG(DSPABASE);
-	OUTREG(DSPABASE, tmp);
-
-	/* Turn off/on the HW cursor */
-#if VERBOSE > 0
-	DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
-#endif
-	if (dinfo->cursor_on) {
-		if (blank)
-			intelfbhw_cursor_hide(dinfo);
-		else
-			intelfbhw_cursor_show(dinfo);
-		dinfo->cursor_on = 1;
-	}
-	dinfo->cursor_blanked = blank;
-
-	/* Set DPMS level */
-	tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
-	switch (blank) {
-	case FB_BLANK_UNBLANK:
-	case FB_BLANK_NORMAL:
-		tmp |= ADPA_DPMS_D0;
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:
-		tmp |= ADPA_DPMS_D1;
-		break;
-	case FB_BLANK_HSYNC_SUSPEND:
-		tmp |= ADPA_DPMS_D2;
-		break;
-	case FB_BLANK_POWERDOWN:
-		tmp |= ADPA_DPMS_D3;
-		break;
-	}
-	OUTREG(ADPA, tmp);
-
-	return;
-}
-
-
-/* Check which pipe is connected to an active display plane. */
-int intelfbhw_active_pipe(const struct intelfb_hwstate *hw)
-{
-	int pipe = -1;
-
-	/* keep old default behaviour - prefer PIPE_A */
-	if (hw->disp_b_ctrl & DISPPLANE_PLANE_ENABLE) {
-		pipe = (hw->disp_b_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
-		pipe &= PIPE_MASK;
-		if (unlikely(pipe == PIPE_A))
-			return PIPE_A;
-	}
-	if (hw->disp_a_ctrl & DISPPLANE_PLANE_ENABLE) {
-		pipe = (hw->disp_a_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
-		pipe &= PIPE_MASK;
-		if (likely(pipe == PIPE_A))
-			return PIPE_A;
-	}
-	/* Impossible that no pipe is selected - return PIPE_A */
-	WARN_ON(pipe == -1);
-	if (unlikely(pipe == -1))
-		pipe = PIPE_A;
-
-	return pipe;
-}
-
-void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
-			 unsigned red, unsigned green, unsigned blue,
-			 unsigned transp)
-{
-	u32 palette_reg = (dinfo->pipe == PIPE_A) ?
-			  PALETTE_A : PALETTE_B;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
-		regno, red, green, blue);
-#endif
-
-	OUTREG(palette_reg + (regno << 2),
-	       (red << PALETTE_8_RED_SHIFT) |
-	       (green << PALETTE_8_GREEN_SHIFT) |
-	       (blue << PALETTE_8_BLUE_SHIFT));
-}
-
-
-int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
-			    struct intelfb_hwstate *hw, int flag)
-{
-	int i;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_read_hw_state\n");
-#endif
-
-	if (!hw || !dinfo)
-		return -1;
-
-	/* Read in as much of the HW state as possible. */
-	hw->vga0_divisor = INREG(VGA0_DIVISOR);
-	hw->vga1_divisor = INREG(VGA1_DIVISOR);
-	hw->vga_pd = INREG(VGAPD);
-	hw->dpll_a = INREG(DPLL_A);
-	hw->dpll_b = INREG(DPLL_B);
-	hw->fpa0 = INREG(FPA0);
-	hw->fpa1 = INREG(FPA1);
-	hw->fpb0 = INREG(FPB0);
-	hw->fpb1 = INREG(FPB1);
-
-	if (flag == 1)
-		return flag;
-
-#if 0
-	/* This seems to be a problem with the 852GM/855GM */
-	for (i = 0; i < PALETTE_8_ENTRIES; i++) {
-		hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
-		hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
-	}
-#endif
-
-	if (flag == 2)
-		return flag;
-
-	hw->htotal_a = INREG(HTOTAL_A);
-	hw->hblank_a = INREG(HBLANK_A);
-	hw->hsync_a = INREG(HSYNC_A);
-	hw->vtotal_a = INREG(VTOTAL_A);
-	hw->vblank_a = INREG(VBLANK_A);
-	hw->vsync_a = INREG(VSYNC_A);
-	hw->src_size_a = INREG(SRC_SIZE_A);
-	hw->bclrpat_a = INREG(BCLRPAT_A);
-	hw->htotal_b = INREG(HTOTAL_B);
-	hw->hblank_b = INREG(HBLANK_B);
-	hw->hsync_b = INREG(HSYNC_B);
-	hw->vtotal_b = INREG(VTOTAL_B);
-	hw->vblank_b = INREG(VBLANK_B);
-	hw->vsync_b = INREG(VSYNC_B);
-	hw->src_size_b = INREG(SRC_SIZE_B);
-	hw->bclrpat_b = INREG(BCLRPAT_B);
-
-	if (flag == 3)
-		return flag;
-
-	hw->adpa = INREG(ADPA);
-	hw->dvoa = INREG(DVOA);
-	hw->dvob = INREG(DVOB);
-	hw->dvoc = INREG(DVOC);
-	hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
-	hw->dvob_srcdim = INREG(DVOB_SRCDIM);
-	hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
-	hw->lvds = INREG(LVDS);
-
-	if (flag == 4)
-		return flag;
-
-	hw->pipe_a_conf = INREG(PIPEACONF);
-	hw->pipe_b_conf = INREG(PIPEBCONF);
-	hw->disp_arb = INREG(DISPARB);
-
-	if (flag == 5)
-		return flag;
-
-	hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
-	hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
-	hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
-	hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
-
-	if (flag == 6)
-		return flag;
-
-	for (i = 0; i < 4; i++) {
-		hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
-		hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
-	}
-
-	if (flag == 7)
-		return flag;
-
-	hw->cursor_size = INREG(CURSOR_SIZE);
-
-	if (flag == 8)
-		return flag;
-
-	hw->disp_a_ctrl = INREG(DSPACNTR);
-	hw->disp_b_ctrl = INREG(DSPBCNTR);
-	hw->disp_a_base = INREG(DSPABASE);
-	hw->disp_b_base = INREG(DSPBBASE);
-	hw->disp_a_stride = INREG(DSPASTRIDE);
-	hw->disp_b_stride = INREG(DSPBSTRIDE);
-
-	if (flag == 9)
-		return flag;
-
-	hw->vgacntrl = INREG(VGACNTRL);
-
-	if (flag == 10)
-		return flag;
-
-	hw->add_id = INREG(ADD_ID);
-
-	if (flag == 11)
-		return flag;
-
-	for (i = 0; i < 7; i++) {
-		hw->swf0x[i] = INREG(SWF00 + (i << 2));
-		hw->swf1x[i] = INREG(SWF10 + (i << 2));
-		if (i < 3)
-			hw->swf3x[i] = INREG(SWF30 + (i << 2));
-	}
-
-	for (i = 0; i < 8; i++)
-		hw->fence[i] = INREG(FENCE + (i << 2));
-
-	hw->instpm = INREG(INSTPM);
-	hw->mem_mode = INREG(MEM_MODE);
-	hw->fw_blc_0 = INREG(FW_BLC_0);
-	hw->fw_blc_1 = INREG(FW_BLC_1);
-
-	hw->hwstam = INREG16(HWSTAM);
-	hw->ier = INREG16(IER);
-	hw->iir = INREG16(IIR);
-	hw->imr = INREG16(IMR);
-
-	return 0;
-}
-
-
-static int calc_vclock3(int index, int m, int n, int p)
-{
-	if (p == 0 || n == 0)
-		return 0;
-	return plls[index].ref_clk * m / n / p;
-}
-
-static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2,
-		       int lvds)
-{
-	struct pll_min_max *pll = &plls[index];
-	u32 m, vco, p;
-
-	m = (5 * (m1 + 2)) + (m2 + 2);
-	n += 2;
-	vco = pll->ref_clk * m / n;
-
-	if (index == PLLS_I8xx)
-		p = ((p1 + 2) * (1 << (p2 + 1)));
-	else
-		p = ((p1) * (p2 ? 5 : 10));
-	return vco / p;
-}
-
-#if REGDUMP
-static void intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll,
-			       int *o_p1, int *o_p2)
-{
-	int p1, p2;
-
-	if (IS_I9XX(dinfo)) {
-		if (dpll & DPLL_P1_FORCE_DIV2)
-			p1 = 1;
-		else
-			p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
-
-		p1 = ffs(p1);
-
-		p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
-	} else {
-		if (dpll & DPLL_P1_FORCE_DIV2)
-			p1 = 0;
-		else
-			p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
-		p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
-	}
-
-	*o_p1 = p1;
-	*o_p2 = p2;
-}
-#endif
-
-
-void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
-			      struct intelfb_hwstate *hw)
-{
-#if REGDUMP
-	int i, m1, m2, n, p1, p2;
-	int index = dinfo->pll_index;
-	DBG_MSG("intelfbhw_print_hw_state\n");
-
-	if (!hw)
-		return;
-	/* Read in as much of the HW state as possible. */
-	printk("hw state dump start\n");
-	printk("	VGA0_DIVISOR:		0x%08x\n", hw->vga0_divisor);
-	printk("	VGA1_DIVISOR:		0x%08x\n", hw->vga1_divisor);
-	printk("	VGAPD:			0x%08x\n", hw->vga_pd);
-	n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-
-	intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
-
-	printk("	VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
-	       m1, m2, n, p1, p2);
-	printk("	VGA0: clock is %d\n",
-	       calc_vclock(index, m1, m2, n, p1, p2, 0));
-
-	n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-
-	intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
-	printk("	VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
-	       m1, m2, n, p1, p2);
-	printk("	VGA1: clock is %d\n",
-	       calc_vclock(index, m1, m2, n, p1, p2, 0));
-
-	printk("	DPLL_A:			0x%08x\n", hw->dpll_a);
-	printk("	DPLL_B:			0x%08x\n", hw->dpll_b);
-	printk("	FPA0:			0x%08x\n", hw->fpa0);
-	printk("	FPA1:			0x%08x\n", hw->fpa1);
-	printk("	FPB0:			0x%08x\n", hw->fpb0);
-	printk("	FPB1:			0x%08x\n", hw->fpb1);
-
-	n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-
-	intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
-
-	printk("	PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
-	       m1, m2, n, p1, p2);
-	printk("	PLLA0: clock is %d\n",
-	       calc_vclock(index, m1, m2, n, p1, p2, 0));
-
-	n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-	m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
-
-	intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
-
-	printk("	PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
-	       m1, m2, n, p1, p2);
-	printk("	PLLA1: clock is %d\n",
-	       calc_vclock(index, m1, m2, n, p1, p2, 0));
-
-#if 0
-	printk("	PALETTE_A:\n");
-	for (i = 0; i < PALETTE_8_ENTRIES)
-		printk("	%3d:	0x%08x\n", i, hw->palette_a[i]);
-	printk("	PALETTE_B:\n");
-	for (i = 0; i < PALETTE_8_ENTRIES)
-		printk("	%3d:	0x%08x\n", i, hw->palette_b[i]);
-#endif
-
-	printk("	HTOTAL_A:		0x%08x\n", hw->htotal_a);
-	printk("	HBLANK_A:		0x%08x\n", hw->hblank_a);
-	printk("	HSYNC_A:		0x%08x\n", hw->hsync_a);
-	printk("	VTOTAL_A:		0x%08x\n", hw->vtotal_a);
-	printk("	VBLANK_A:		0x%08x\n", hw->vblank_a);
-	printk("	VSYNC_A:		0x%08x\n", hw->vsync_a);
-	printk("	SRC_SIZE_A:		0x%08x\n", hw->src_size_a);
-	printk("	BCLRPAT_A:		0x%08x\n", hw->bclrpat_a);
-	printk("	HTOTAL_B:		0x%08x\n", hw->htotal_b);
-	printk("	HBLANK_B:		0x%08x\n", hw->hblank_b);
-	printk("	HSYNC_B:		0x%08x\n", hw->hsync_b);
-	printk("	VTOTAL_B:		0x%08x\n", hw->vtotal_b);
-	printk("	VBLANK_B:		0x%08x\n", hw->vblank_b);
-	printk("	VSYNC_B:		0x%08x\n", hw->vsync_b);
-	printk("	SRC_SIZE_B:		0x%08x\n", hw->src_size_b);
-	printk("	BCLRPAT_B:		0x%08x\n", hw->bclrpat_b);
-
-	printk("	ADPA:			0x%08x\n", hw->adpa);
-	printk("	DVOA:			0x%08x\n", hw->dvoa);
-	printk("	DVOB:			0x%08x\n", hw->dvob);
-	printk("	DVOC:			0x%08x\n", hw->dvoc);
-	printk("	DVOA_SRCDIM:		0x%08x\n", hw->dvoa_srcdim);
-	printk("	DVOB_SRCDIM:		0x%08x\n", hw->dvob_srcdim);
-	printk("	DVOC_SRCDIM:		0x%08x\n", hw->dvoc_srcdim);
-	printk("	LVDS:			0x%08x\n", hw->lvds);
-
-	printk("	PIPEACONF:		0x%08x\n", hw->pipe_a_conf);
-	printk("	PIPEBCONF:		0x%08x\n", hw->pipe_b_conf);
-	printk("	DISPARB:		0x%08x\n", hw->disp_arb);
-
-	printk("	CURSOR_A_CONTROL:	0x%08x\n", hw->cursor_a_control);
-	printk("	CURSOR_B_CONTROL:	0x%08x\n", hw->cursor_b_control);
-	printk("	CURSOR_A_BASEADDR:	0x%08x\n", hw->cursor_a_base);
-	printk("	CURSOR_B_BASEADDR:	0x%08x\n", hw->cursor_b_base);
-
-	printk("	CURSOR_A_PALETTE:	");
-	for (i = 0; i < 4; i++) {
-		printk("0x%08x", hw->cursor_a_palette[i]);
-		if (i < 3)
-			printk(", ");
-	}
-	printk("\n");
-	printk("	CURSOR_B_PALETTE:	");
-	for (i = 0; i < 4; i++) {
-		printk("0x%08x", hw->cursor_b_palette[i]);
-		if (i < 3)
-			printk(", ");
-	}
-	printk("\n");
-
-	printk("	CURSOR_SIZE:		0x%08x\n", hw->cursor_size);
-
-	printk("	DSPACNTR:		0x%08x\n", hw->disp_a_ctrl);
-	printk("	DSPBCNTR:		0x%08x\n", hw->disp_b_ctrl);
-	printk("	DSPABASE:		0x%08x\n", hw->disp_a_base);
-	printk("	DSPBBASE:		0x%08x\n", hw->disp_b_base);
-	printk("	DSPASTRIDE:		0x%08x\n", hw->disp_a_stride);
-	printk("	DSPBSTRIDE:		0x%08x\n", hw->disp_b_stride);
-
-	printk("	VGACNTRL:		0x%08x\n", hw->vgacntrl);
-	printk("	ADD_ID:			0x%08x\n", hw->add_id);
-
-	for (i = 0; i < 7; i++) {
-		printk("	SWF0%d			0x%08x\n", i,
-			hw->swf0x[i]);
-	}
-	for (i = 0; i < 7; i++) {
-		printk("	SWF1%d			0x%08x\n", i,
-			hw->swf1x[i]);
-	}
-	for (i = 0; i < 3; i++) {
-		printk("	SWF3%d			0x%08x\n", i,
-		       hw->swf3x[i]);
-	}
-	for (i = 0; i < 8; i++)
-		printk("	FENCE%d			0x%08x\n", i,
-		       hw->fence[i]);
-
-	printk("	INSTPM			0x%08x\n", hw->instpm);
-	printk("	MEM_MODE		0x%08x\n", hw->mem_mode);
-	printk("	FW_BLC_0		0x%08x\n", hw->fw_blc_0);
-	printk("	FW_BLC_1		0x%08x\n", hw->fw_blc_1);
-
-	printk("	HWSTAM			0x%04x\n", hw->hwstam);
-	printk("	IER			0x%04x\n", hw->ier);
-	printk("	IIR			0x%04x\n", hw->iir);
-	printk("	IMR			0x%04x\n", hw->imr);
-	printk("hw state dump end\n");
-#endif
-}
-
-
-
-/* Split the M parameter into M1 and M2. */
-static int splitm(int index, unsigned int m, unsigned int *retm1,
-		  unsigned int *retm2)
-{
-	int m1, m2;
-	int testm;
-	struct pll_min_max *pll = &plls[index];
-
-	/* no point optimising too much - brute force m */
-	for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
-		for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
-			testm = (5 * (m1 + 2)) + (m2 + 2);
-			if (testm == m) {
-				*retm1 = (unsigned int)m1;
-				*retm2 = (unsigned int)m2;
-				return 0;
-			}
-		}
-	}
-	return 1;
-}
-
-/* Split the P parameter into P1 and P2. */
-static int splitp(int index, unsigned int p, unsigned int *retp1,
-		  unsigned int *retp2)
-{
-	int p1, p2;
-	struct pll_min_max *pll = &plls[index];
-
-	if (index == PLLS_I9xx) {
-		p2 = (p % 10) ? 1 : 0;
-
-		p1 = p / (p2 ? 5 : 10);
-
-		*retp1 = (unsigned int)p1;
-		*retp2 = (unsigned int)p2;
-		return 0;
-	}
-
-	if (p % 4 == 0)
-		p2 = 1;
-	else
-		p2 = 0;
-	p1 = (p / (1 << (p2 + 1))) - 2;
-	if (p % 4 == 0 && p1 < pll->min_p1) {
-		p2 = 0;
-		p1 = (p / (1 << (p2 + 1))) - 2;
-	}
-	if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
-	    (p1 + 2) * (1 << (p2 + 1)) != p) {
-		return 1;
-	} else {
-		*retp1 = (unsigned int)p1;
-		*retp2 = (unsigned int)p2;
-		return 0;
-	}
-}
-
-static int calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2,
-			   u32 *retn, u32 *retp1, u32 *retp2, u32 *retclock)
-{
-	u32 m1, m2, n, p1, p2, n1, testm;
-	u32 f_vco, p, p_best = 0, m, f_out = 0;
-	u32 err_best = 10000000;
-	u32 n_best = 0, m_best = 0, f_err;
-	u32 p_min, p_max, p_inc, div_max;
-	struct pll_min_max *pll = &plls[index];
-
-	DBG_MSG("Clock is %d\n", clock);
-
-	div_max = pll->max_vco / clock;
-
-	p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
-	p_min = p_inc;
-	p_max = ROUND_DOWN_TO(div_max, p_inc);
-	if (p_min < pll->min_p)
-		p_min = pll->min_p;
-	if (p_max > pll->max_p)
-		p_max = pll->max_p;
-
-	DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
-
-	p = p_min;
-	do {
-		if (splitp(index, p, &p1, &p2)) {
-			WRN_MSG("cannot split p = %d\n", p);
-			p += p_inc;
-			continue;
-		}
-		n = pll->min_n;
-		f_vco = clock * p;
-
-		do {
-			m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
-			if (m < pll->min_m)
-				m = pll->min_m + 1;
-			if (m > pll->max_m)
-				m = pll->max_m - 1;
-			for (testm = m - 1; testm <= m; testm++) {
-				f_out = calc_vclock3(index, testm, n, p);
-				if (splitm(index, testm, &m1, &m2)) {
-					WRN_MSG("cannot split m = %d\n",
-						testm);
-					continue;
-				}
-				if (clock > f_out)
-					f_err = clock - f_out;
-				else/* slightly bias the error for bigger clocks */
-					f_err = f_out - clock + 1;
-
-				if (f_err < err_best) {
-					m_best = testm;
-					n_best = n;
-					p_best = p;
-					err_best = f_err;
-				}
-			}
-			n++;
-		} while ((n <= pll->max_n) && (f_out >= clock));
-		p += p_inc;
-	} while ((p <= p_max));
-
-	if (!m_best) {
-		WRN_MSG("cannot find parameters for clock %d\n", clock);
-		return 1;
-	}
-	m = m_best;
-	n = n_best;
-	p = p_best;
-	splitm(index, m, &m1, &m2);
-	splitp(index, p, &p1, &p2);
-	n1 = n - 2;
-
-	DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
-		"f: %d (%d), VCO: %d\n",
-		m, m1, m2, n, n1, p, p1, p2,
-		calc_vclock3(index, m, n, p),
-		calc_vclock(index, m1, m2, n1, p1, p2, 0),
-		calc_vclock3(index, m, n, p) * p);
-	*retm1 = m1;
-	*retm2 = m2;
-	*retn = n1;
-	*retp1 = p1;
-	*retp2 = p2;
-	*retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
-
-	return 0;
-}
-
-static __inline__ int check_overflow(u32 value, u32 limit,
-				     const char *description)
-{
-	if (value > limit) {
-		WRN_MSG("%s value %d exceeds limit %d\n",
-			description, value, limit);
-		return 1;
-	}
-	return 0;
-}
-
-/* It is assumed that hw is filled in with the initial state information. */
-int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
-			 struct intelfb_hwstate *hw,
-			 struct fb_var_screeninfo *var)
-{
-	int pipe = intelfbhw_active_pipe(hw);
-	u32 *dpll, *fp0, *fp1;
-	u32 m1, m2, n, p1, p2, clock_target, clock;
-	u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
-	u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
-	u32 vsync_pol, hsync_pol;
-	u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
-	u32 stride_alignment;
-
-	DBG_MSG("intelfbhw_mode_to_hw\n");
-
-	/* Disable VGA */
-	hw->vgacntrl |= VGA_DISABLE;
-
-	/* Set which pipe's registers will be set. */
-	if (pipe == PIPE_B) {
-		dpll = &hw->dpll_b;
-		fp0 = &hw->fpb0;
-		fp1 = &hw->fpb1;
-		hs = &hw->hsync_b;
-		hb = &hw->hblank_b;
-		ht = &hw->htotal_b;
-		vs = &hw->vsync_b;
-		vb = &hw->vblank_b;
-		vt = &hw->vtotal_b;
-		ss = &hw->src_size_b;
-		pipe_conf = &hw->pipe_b_conf;
-	} else {
-		dpll = &hw->dpll_a;
-		fp0 = &hw->fpa0;
-		fp1 = &hw->fpa1;
-		hs = &hw->hsync_a;
-		hb = &hw->hblank_a;
-		ht = &hw->htotal_a;
-		vs = &hw->vsync_a;
-		vb = &hw->vblank_a;
-		vt = &hw->vtotal_a;
-		ss = &hw->src_size_a;
-		pipe_conf = &hw->pipe_a_conf;
-	}
-
-	/* Use ADPA register for sync control. */
-	hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
-
-	/* sync polarity */
-	hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
-			ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
-	vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
-			ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
-	hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
-		      (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
-	hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
-		    (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
-
-	/* Connect correct pipe to the analog port DAC */
-	hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
-	hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
-
-	/* Set DPMS state to D0 (on) */
-	hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
-	hw->adpa |= ADPA_DPMS_D0;
-
-	hw->adpa |= ADPA_DAC_ENABLE;
-
-	*dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
-	*dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
-	*dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
-
-	/* Desired clock in kHz */
-	clock_target = 1000000000 / var->pixclock;
-
-	if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
-			    &n, &p1, &p2, &clock)) {
-		WRN_MSG("calc_pll_params failed\n");
-		return 1;
-	}
-
-	/* Check for overflow. */
-	if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
-		return 1;
-	if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
-		return 1;
-	if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
-		return 1;
-	if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
-		return 1;
-	if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
-		return 1;
-
-	*dpll &= ~DPLL_P1_FORCE_DIV2;
-	*dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
-		   (DPLL_P1_MASK << DPLL_P1_SHIFT));
-
-	if (IS_I9XX(dinfo)) {
-		*dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
-		*dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
-	} else
-		*dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
-
-	*fp0 = (n << FP_N_DIVISOR_SHIFT) |
-	       (m1 << FP_M1_DIVISOR_SHIFT) |
-	       (m2 << FP_M2_DIVISOR_SHIFT);
-	*fp1 = *fp0;
-
-	hw->dvob &= ~PORT_ENABLE;
-	hw->dvoc &= ~PORT_ENABLE;
-
-	/* Use display plane A. */
-	hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
-	hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
-	hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
-	switch (intelfb_var_to_depth(var)) {
-	case 8:
-		hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
-		break;
-	case 15:
-		hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
-		break;
-	case 16:
-		hw->disp_a_ctrl |= DISPPLANE_16BPP;
-		break;
-	case 24:
-		hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
-		break;
-	}
-	hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
-	hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
-
-	/* Set CRTC registers. */
-	hactive = var->xres;
-	hsync_start = hactive + var->right_margin;
-	hsync_end = hsync_start + var->hsync_len;
-	htotal = hsync_end + var->left_margin;
-	hblank_start = hactive;
-	hblank_end = htotal;
-
-	DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
-		hactive, hsync_start, hsync_end, htotal, hblank_start,
-		hblank_end);
-
-	vactive = var->yres;
-	if (var->vmode & FB_VMODE_INTERLACED)
-		vactive--; /* the chip adds 2 halflines automatically */
-	vsync_start = vactive + var->lower_margin;
-	vsync_end = vsync_start + var->vsync_len;
-	vtotal = vsync_end + var->upper_margin;
-	vblank_start = vactive;
-	vblank_end = vsync_end + 1;
-
-	DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
-		vactive, vsync_start, vsync_end, vtotal, vblank_start,
-		vblank_end);
-
-	/* Adjust for register values, and check for overflow. */
-	hactive--;
-	if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
-		return 1;
-	hsync_start--;
-	if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
-		return 1;
-	hsync_end--;
-	if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
-		return 1;
-	htotal--;
-	if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
-		return 1;
-	hblank_start--;
-	if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
-		return 1;
-	hblank_end--;
-	if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
-		return 1;
-
-	vactive--;
-	if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
-		return 1;
-	vsync_start--;
-	if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
-		return 1;
-	vsync_end--;
-	if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
-		return 1;
-	vtotal--;
-	if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
-		return 1;
-	vblank_start--;
-	if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
-		return 1;
-	vblank_end--;
-	if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
-		return 1;
-
-	*ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
-	*hb = (hblank_start << HBLANKSTART_SHIFT) |
-	      (hblank_end << HSYNCEND_SHIFT);
-	*hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
-
-	*vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
-	*vb = (vblank_start << VBLANKSTART_SHIFT) |
-	      (vblank_end << VSYNCEND_SHIFT);
-	*vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
-	*ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
-	      (vactive << SRC_SIZE_VERT_SHIFT);
-
-	hw->disp_a_stride = dinfo->pitch;
-	DBG_MSG("pitch is %d\n", hw->disp_a_stride);
-
-	hw->disp_a_base = hw->disp_a_stride * var->yoffset +
-			  var->xoffset * var->bits_per_pixel / 8;
-
-	hw->disp_a_base += dinfo->fb.offset << 12;
-
-	/* Check stride alignment. */
-	stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
-					    STRIDE_ALIGNMENT;
-	if (hw->disp_a_stride % stride_alignment != 0) {
-		WRN_MSG("display stride %d has bad alignment %d\n",
-			hw->disp_a_stride, stride_alignment);
-		return 1;
-	}
-
-	/* Set the palette to 8-bit mode. */
-	*pipe_conf &= ~PIPECONF_GAMMA;
-
-	if (var->vmode & FB_VMODE_INTERLACED)
-		*pipe_conf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
-	else
-		*pipe_conf &= ~PIPECONF_INTERLACE_MASK;
-
-	return 0;
-}
-
-/* Program a (non-VGA) video mode. */
-int intelfbhw_program_mode(struct intelfb_info *dinfo,
-			   const struct intelfb_hwstate *hw, int blank)
-{
-	u32 tmp;
-	const u32 *dpll, *fp0, *fp1, *pipe_conf;
-	const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
-	u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg, pipe_stat_reg;
-	u32 hsync_reg, htotal_reg, hblank_reg;
-	u32 vsync_reg, vtotal_reg, vblank_reg;
-	u32 src_size_reg;
-	u32 count, tmp_val[3];
-
-	/* Assume single pipe */
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_program_mode\n");
-#endif
-
-	/* Disable VGA */
-	tmp = INREG(VGACNTRL);
-	tmp |= VGA_DISABLE;
-	OUTREG(VGACNTRL, tmp);
-
-	dinfo->pipe = intelfbhw_active_pipe(hw);
-
-	if (dinfo->pipe == PIPE_B) {
-		dpll = &hw->dpll_b;
-		fp0 = &hw->fpb0;
-		fp1 = &hw->fpb1;
-		pipe_conf = &hw->pipe_b_conf;
-		hs = &hw->hsync_b;
-		hb = &hw->hblank_b;
-		ht = &hw->htotal_b;
-		vs = &hw->vsync_b;
-		vb = &hw->vblank_b;
-		vt = &hw->vtotal_b;
-		ss = &hw->src_size_b;
-		dpll_reg = DPLL_B;
-		fp0_reg = FPB0;
-		fp1_reg = FPB1;
-		pipe_conf_reg = PIPEBCONF;
-		pipe_stat_reg = PIPEBSTAT;
-		hsync_reg = HSYNC_B;
-		htotal_reg = HTOTAL_B;
-		hblank_reg = HBLANK_B;
-		vsync_reg = VSYNC_B;
-		vtotal_reg = VTOTAL_B;
-		vblank_reg = VBLANK_B;
-		src_size_reg = SRC_SIZE_B;
-	} else {
-		dpll = &hw->dpll_a;
-		fp0 = &hw->fpa0;
-		fp1 = &hw->fpa1;
-		pipe_conf = &hw->pipe_a_conf;
-		hs = &hw->hsync_a;
-		hb = &hw->hblank_a;
-		ht = &hw->htotal_a;
-		vs = &hw->vsync_a;
-		vb = &hw->vblank_a;
-		vt = &hw->vtotal_a;
-		ss = &hw->src_size_a;
-		dpll_reg = DPLL_A;
-		fp0_reg = FPA0;
-		fp1_reg = FPA1;
-		pipe_conf_reg = PIPEACONF;
-		pipe_stat_reg = PIPEASTAT;
-		hsync_reg = HSYNC_A;
-		htotal_reg = HTOTAL_A;
-		hblank_reg = HBLANK_A;
-		vsync_reg = VSYNC_A;
-		vtotal_reg = VTOTAL_A;
-		vblank_reg = VBLANK_A;
-		src_size_reg = SRC_SIZE_A;
-	}
-
-	/* turn off pipe */
-	tmp = INREG(pipe_conf_reg);
-	tmp &= ~PIPECONF_ENABLE;
-	OUTREG(pipe_conf_reg, tmp);
-
-	count = 0;
-	do {
-		tmp_val[count % 3] = INREG(PIPEA_DSL);
-		if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1] == tmp_val[2]))
-			break;
-		count++;
-		udelay(1);
-		if (count % 200 == 0) {
-			tmp = INREG(pipe_conf_reg);
-			tmp &= ~PIPECONF_ENABLE;
-			OUTREG(pipe_conf_reg, tmp);
-		}
-	} while (count < 2000);
-
-	OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
-
-	/* Disable planes A and B. */
-	tmp = INREG(DSPACNTR);
-	tmp &= ~DISPPLANE_PLANE_ENABLE;
-	OUTREG(DSPACNTR, tmp);
-	tmp = INREG(DSPBCNTR);
-	tmp &= ~DISPPLANE_PLANE_ENABLE;
-	OUTREG(DSPBCNTR, tmp);
-
-	/* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
-	mdelay(20);
-
-	OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
-	OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
-	OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
-
-	/* Disable Sync */
-	tmp = INREG(ADPA);
-	tmp &= ~ADPA_DPMS_CONTROL_MASK;
-	tmp |= ADPA_DPMS_D3;
-	OUTREG(ADPA, tmp);
-
-	/* do some funky magic - xyzzy */
-	OUTREG(0x61204, 0xabcd0000);
-
-	/* turn off PLL */
-	tmp = INREG(dpll_reg);
-	tmp &= ~DPLL_VCO_ENABLE;
-	OUTREG(dpll_reg, tmp);
-
-	/* Set PLL parameters */
-	OUTREG(fp0_reg, *fp0);
-	OUTREG(fp1_reg, *fp1);
-
-	/* Enable PLL */
-	OUTREG(dpll_reg, *dpll);
-
-	/* Set DVOs B/C */
-	OUTREG(DVOB, hw->dvob);
-	OUTREG(DVOC, hw->dvoc);
-
-	/* undo funky magic */
-	OUTREG(0x61204, 0x00000000);
-
-	/* Set ADPA */
-	OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
-	OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
-
-	/* Set pipe parameters */
-	OUTREG(hsync_reg, *hs);
-	OUTREG(hblank_reg, *hb);
-	OUTREG(htotal_reg, *ht);
-	OUTREG(vsync_reg, *vs);
-	OUTREG(vblank_reg, *vb);
-	OUTREG(vtotal_reg, *vt);
-	OUTREG(src_size_reg, *ss);
-
-	switch (dinfo->info->var.vmode & (FB_VMODE_INTERLACED |
-					  FB_VMODE_ODD_FLD_FIRST)) {
-	case FB_VMODE_INTERLACED | FB_VMODE_ODD_FLD_FIRST:
-		OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_ODD_EN);
-		break;
-	case FB_VMODE_INTERLACED: /* even lines first */
-		OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_EVEN_EN);
-		break;
-	default:		/* non-interlaced */
-		OUTREG(pipe_stat_reg, 0xFFFF); /* clear all status bits only */
-	}
-	/* Enable pipe */
-	OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
-
-	/* Enable sync */
-	tmp = INREG(ADPA);
-	tmp &= ~ADPA_DPMS_CONTROL_MASK;
-	tmp |= ADPA_DPMS_D0;
-	OUTREG(ADPA, tmp);
-
-	/* setup display plane */
-	if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
-		/*
-		 *      i830M errata: the display plane must be enabled
-		 *      to allow writes to the other bits in the plane
-		 *      control register.
-		 */
-		tmp = INREG(DSPACNTR);
-		if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
-			tmp |= DISPPLANE_PLANE_ENABLE;
-			OUTREG(DSPACNTR, tmp);
-			OUTREG(DSPACNTR,
-			       hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
-			mdelay(1);
-		}
-	}
-
-	OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
-	OUTREG(DSPASTRIDE, hw->disp_a_stride);
-	OUTREG(DSPABASE, hw->disp_a_base);
-
-	/* Enable plane */
-	if (!blank) {
-		tmp = INREG(DSPACNTR);
-		tmp |= DISPPLANE_PLANE_ENABLE;
-		OUTREG(DSPACNTR, tmp);
-		OUTREG(DSPABASE, hw->disp_a_base);
-	}
-
-	return 0;
-}
-
-/* forward declarations */
-static void refresh_ring(struct intelfb_info *dinfo);
-static void reset_state(struct intelfb_info *dinfo);
-static void do_flush(struct intelfb_info *dinfo);
-
-static  u32 get_ring_space(struct intelfb_info *dinfo)
-{
-	u32 ring_space;
-
-	if (dinfo->ring_tail >= dinfo->ring_head)
-		ring_space = dinfo->ring.size -
-			(dinfo->ring_tail - dinfo->ring_head);
-	else
-		ring_space = dinfo->ring_head - dinfo->ring_tail;
-
-	if (ring_space > RING_MIN_FREE)
-		ring_space -= RING_MIN_FREE;
-	else
-		ring_space = 0;
-
-	return ring_space;
-}
-
-static int wait_ring(struct intelfb_info *dinfo, int n)
-{
-	int i = 0;
-	unsigned long end;
-	u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
-
-#if VERBOSE > 0
-	DBG_MSG("wait_ring: %d\n", n);
-#endif
-
-	end = jiffies + (HZ * 3);
-	while (dinfo->ring_space < n) {
-		dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
-		dinfo->ring_space = get_ring_space(dinfo);
-
-		if (dinfo->ring_head != last_head) {
-			end = jiffies + (HZ * 3);
-			last_head = dinfo->ring_head;
-		}
-		i++;
-		if (time_before(end, jiffies)) {
-			if (!i) {
-				/* Try again */
-				reset_state(dinfo);
-				refresh_ring(dinfo);
-				do_flush(dinfo);
-				end = jiffies + (HZ * 3);
-				i = 1;
-			} else {
-				WRN_MSG("ring buffer : space: %d wanted %d\n",
-					dinfo->ring_space, n);
-				WRN_MSG("lockup - turning off hardware "
-					"acceleration\n");
-				dinfo->ring_lockup = 1;
-				break;
-			}
-		}
-		udelay(1);
-	}
-	return i;
-}
-
-static void do_flush(struct intelfb_info *dinfo)
-{
-	START_RING(2);
-	OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
-	OUT_RING(MI_NOOP);
-	ADVANCE_RING();
-}
-
-void intelfbhw_do_sync(struct intelfb_info *dinfo)
-{
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_do_sync\n");
-#endif
-
-	if (!dinfo->accel)
-		return;
-
-	/*
-	 * Send a flush, then wait until the ring is empty.  This is what
-	 * the XFree86 driver does, and actually it doesn't seem a lot worse
-	 * than the recommended method (both have problems).
-	 */
-	do_flush(dinfo);
-	wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
-	dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
-}
-
-static void refresh_ring(struct intelfb_info *dinfo)
-{
-#if VERBOSE > 0
-	DBG_MSG("refresh_ring\n");
-#endif
-
-	dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
-	dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
-	dinfo->ring_space = get_ring_space(dinfo);
-}
-
-static void reset_state(struct intelfb_info *dinfo)
-{
-	int i;
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("reset_state\n");
-#endif
-
-	for (i = 0; i < FENCE_NUM; i++)
-		OUTREG(FENCE + (i << 2), 0);
-
-	/* Flush the ring buffer if it's enabled. */
-	tmp = INREG(PRI_RING_LENGTH);
-	if (tmp & RING_ENABLE) {
-#if VERBOSE > 0
-		DBG_MSG("reset_state: ring was enabled\n");
-#endif
-		refresh_ring(dinfo);
-		intelfbhw_do_sync(dinfo);
-		DO_RING_IDLE();
-	}
-
-	OUTREG(PRI_RING_LENGTH, 0);
-	OUTREG(PRI_RING_HEAD, 0);
-	OUTREG(PRI_RING_TAIL, 0);
-	OUTREG(PRI_RING_START, 0);
-}
-
-/* Stop the 2D engine, and turn off the ring buffer. */
-void intelfbhw_2d_stop(struct intelfb_info *dinfo)
-{
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n",
-		dinfo->accel, dinfo->ring_active);
-#endif
-
-	if (!dinfo->accel)
-		return;
-
-	dinfo->ring_active = 0;
-	reset_state(dinfo);
-}
-
-/*
- * Enable the ring buffer, and initialise the 2D engine.
- * It is assumed that the graphics engine has been stopped by previously
- * calling intelfb_2d_stop().
- */
-void intelfbhw_2d_start(struct intelfb_info *dinfo)
-{
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
-		dinfo->accel, dinfo->ring_active);
-#endif
-
-	if (!dinfo->accel)
-		return;
-
-	/* Initialise the primary ring buffer. */
-	OUTREG(PRI_RING_LENGTH, 0);
-	OUTREG(PRI_RING_TAIL, 0);
-	OUTREG(PRI_RING_HEAD, 0);
-
-	OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
-	OUTREG(PRI_RING_LENGTH,
-		((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
-		RING_NO_REPORT | RING_ENABLE);
-	refresh_ring(dinfo);
-	dinfo->ring_active = 1;
-}
-
-/* 2D fillrect (solid fill or invert) */
-void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w,
-			   u32 h, u32 color, u32 pitch, u32 bpp, u32 rop)
-{
-	u32 br00, br09, br13, br14, br16;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
-		"rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
-#endif
-
-	br00 = COLOR_BLT_CMD;
-	br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
-	br13 = (rop << ROP_SHIFT) | pitch;
-	br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
-	br16 = color;
-
-	switch (bpp) {
-	case 8:
-		br13 |= COLOR_DEPTH_8;
-		break;
-	case 16:
-		br13 |= COLOR_DEPTH_16;
-		break;
-	case 32:
-		br13 |= COLOR_DEPTH_32;
-		br00 |= WRITE_ALPHA | WRITE_RGB;
-		break;
-	}
-
-	START_RING(6);
-	OUT_RING(br00);
-	OUT_RING(br13);
-	OUT_RING(br14);
-	OUT_RING(br09);
-	OUT_RING(br16);
-	OUT_RING(MI_NOOP);
-	ADVANCE_RING();
-
-#if VERBOSE > 0
-	DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
-		dinfo->ring_tail, dinfo->ring_space);
-#endif
-}
-
-void
-intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
-		    u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
-{
-	u32 br00, br09, br11, br12, br13, br22, br23, br26;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
-		curx, cury, dstx, dsty, w, h, pitch, bpp);
-#endif
-
-	br00 = XY_SRC_COPY_BLT_CMD;
-	br09 = dinfo->fb_start;
-	br11 = (pitch << PITCH_SHIFT);
-	br12 = dinfo->fb_start;
-	br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
-	br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
-	br23 = ((dstx + w) << WIDTH_SHIFT) |
-	       ((dsty + h) << HEIGHT_SHIFT);
-	br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
-
-	switch (bpp) {
-	case 8:
-		br13 |= COLOR_DEPTH_8;
-		break;
-	case 16:
-		br13 |= COLOR_DEPTH_16;
-		break;
-	case 32:
-		br13 |= COLOR_DEPTH_32;
-		br00 |= WRITE_ALPHA | WRITE_RGB;
-		break;
-	}
-
-	START_RING(8);
-	OUT_RING(br00);
-	OUT_RING(br13);
-	OUT_RING(br22);
-	OUT_RING(br23);
-	OUT_RING(br09);
-	OUT_RING(br26);
-	OUT_RING(br11);
-	OUT_RING(br12);
-	ADVANCE_RING();
-}
-
-int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
-			   u32 h, const u8* cdat, u32 x, u32 y, u32 pitch,
-			   u32 bpp)
-{
-	int nbytes, ndwords, pad, tmp;
-	u32 br00, br09, br13, br18, br19, br22, br23;
-	int dat, ix, iy, iw;
-	int i, j;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
-#endif
-
-	/* size in bytes of a padded scanline */
-	nbytes = ROUND_UP_TO(w, 16) / 8;
-
-	/* Total bytes of padded scanline data to write out. */
-	nbytes = nbytes * h;
-
-	/*
-	 * Check if the glyph data exceeds the immediate mode limit.
-	 * It would take a large font (1K pixels) to hit this limit.
-	 */
-	if (nbytes > MAX_MONO_IMM_SIZE)
-		return 0;
-
-	/* Src data is packaged a dword (32-bit) at a time. */
-	ndwords = ROUND_UP_TO(nbytes, 4) / 4;
-
-	/*
-	 * Ring has to be padded to a quad word. But because the command starts
-	   with 7 bytes, pad only if there is an even number of ndwords
-	 */
-	pad = !(ndwords % 2);
-
-	tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
-	br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
-	br09 = dinfo->fb_start;
-	br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
-	br18 = bg;
-	br19 = fg;
-	br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
-	br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
-
-	switch (bpp) {
-	case 8:
-		br13 |= COLOR_DEPTH_8;
-		break;
-	case 16:
-		br13 |= COLOR_DEPTH_16;
-		break;
-	case 32:
-		br13 |= COLOR_DEPTH_32;
-		br00 |= WRITE_ALPHA | WRITE_RGB;
-		break;
-	}
-
-	START_RING(8 + ndwords);
-	OUT_RING(br00);
-	OUT_RING(br13);
-	OUT_RING(br22);
-	OUT_RING(br23);
-	OUT_RING(br09);
-	OUT_RING(br18);
-	OUT_RING(br19);
-	ix = iy = 0;
-	iw = ROUND_UP_TO(w, 8) / 8;
-	while (ndwords--) {
-		dat = 0;
-		for (j = 0; j < 2; ++j) {
-			for (i = 0; i < 2; ++i) {
-				if (ix != iw || i == 0)
-					dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
-			}
-			if (ix == iw && iy != (h-1)) {
-				ix = 0;
-				++iy;
-			}
-		}
-		OUT_RING(dat);
-	}
-	if (pad)
-		OUT_RING(MI_NOOP);
-	ADVANCE_RING();
-
-	return 1;
-}
-
-/* HW cursor functions. */
-void intelfbhw_cursor_init(struct intelfb_info *dinfo)
-{
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_init\n");
-#endif
-
-	if (dinfo->mobile || IS_I9XX(dinfo)) {
-		if (!dinfo->cursor.physical)
-			return;
-		tmp = INREG(CURSOR_A_CONTROL);
-		tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
-			 CURSOR_MEM_TYPE_LOCAL |
-			 (1 << CURSOR_PIPE_SELECT_SHIFT));
-		tmp |= CURSOR_MODE_DISABLE;
-		OUTREG(CURSOR_A_CONTROL, tmp);
-		OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
-	} else {
-		tmp = INREG(CURSOR_CONTROL);
-		tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
-			 CURSOR_ENABLE | CURSOR_STRIDE_MASK);
-		tmp |= CURSOR_FORMAT_3C;
-		OUTREG(CURSOR_CONTROL, tmp);
-		OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
-		tmp = (64 << CURSOR_SIZE_H_SHIFT) |
-		      (64 << CURSOR_SIZE_V_SHIFT);
-		OUTREG(CURSOR_SIZE, tmp);
-	}
-}
-
-void intelfbhw_cursor_hide(struct intelfb_info *dinfo)
-{
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_hide\n");
-#endif
-
-	dinfo->cursor_on = 0;
-	if (dinfo->mobile || IS_I9XX(dinfo)) {
-		if (!dinfo->cursor.physical)
-			return;
-		tmp = INREG(CURSOR_A_CONTROL);
-		tmp &= ~CURSOR_MODE_MASK;
-		tmp |= CURSOR_MODE_DISABLE;
-		OUTREG(CURSOR_A_CONTROL, tmp);
-		/* Flush changes */
-		OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
-	} else {
-		tmp = INREG(CURSOR_CONTROL);
-		tmp &= ~CURSOR_ENABLE;
-		OUTREG(CURSOR_CONTROL, tmp);
-	}
-}
-
-void intelfbhw_cursor_show(struct intelfb_info *dinfo)
-{
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_show\n");
-#endif
-
-	dinfo->cursor_on = 1;
-
-	if (dinfo->cursor_blanked)
-		return;
-
-	if (dinfo->mobile || IS_I9XX(dinfo)) {
-		if (!dinfo->cursor.physical)
-			return;
-		tmp = INREG(CURSOR_A_CONTROL);
-		tmp &= ~CURSOR_MODE_MASK;
-		tmp |= CURSOR_MODE_64_4C_AX;
-		OUTREG(CURSOR_A_CONTROL, tmp);
-		/* Flush changes */
-		OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
-	} else {
-		tmp = INREG(CURSOR_CONTROL);
-		tmp |= CURSOR_ENABLE;
-		OUTREG(CURSOR_CONTROL, tmp);
-	}
-}
-
-void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
-{
-	u32 tmp;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
-#endif
-
-	/*
-	 * Sets the position. The coordinates are assumed to already
-	 * have any offset adjusted. Assume that the cursor is never
-	 * completely off-screen, and that x, y are always >= 0.
-	 */
-
-	tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
-	      ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
-	OUTREG(CURSOR_A_POSITION, tmp);
-
-	if (IS_I9XX(dinfo))
-		OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
-}
-
-void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
-{
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_setcolor\n");
-#endif
-
-	OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
-	OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
-	OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
-	OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
-}
-
-void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
-			   u8 *data)
-{
-	u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
-	int i, j, w = width / 8;
-	int mod = width % 8, t_mask, d_mask;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_load\n");
-#endif
-
-	if (!dinfo->cursor.virtual)
-		return;
-
-	t_mask = 0xff >> mod;
-	d_mask = ~(0xff >> mod);
-	for (i = height; i--; ) {
-		for (j = 0; j < w; j++) {
-			writeb(0x00, addr + j);
-			writeb(*(data++), addr + j+8);
-		}
-		if (mod) {
-			writeb(t_mask, addr + j);
-			writeb(*(data++) & d_mask, addr + j+8);
-		}
-		addr += 16;
-	}
-}
-
-void intelfbhw_cursor_reset(struct intelfb_info *dinfo)
-{
-	u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
-	int i, j;
-
-#if VERBOSE > 0
-	DBG_MSG("intelfbhw_cursor_reset\n");
-#endif
-
-	if (!dinfo->cursor.virtual)
-		return;
-
-	for (i = 64; i--; ) {
-		for (j = 0; j < 8; j++) {
-			writeb(0xff, addr + j+0);
-			writeb(0x00, addr + j+8);
-		}
-		addr += 16;
-	}
-}
-
-static irqreturn_t intelfbhw_irq(int irq, void *dev_id)
-{
-	u16 tmp;
-	struct intelfb_info *dinfo = dev_id;
-
-	spin_lock(&dinfo->int_lock);
-
-	tmp = INREG16(IIR);
-	if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
-		tmp &= PIPE_A_EVENT_INTERRUPT;
-	else
-		tmp &= VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
-
-	if (tmp == 0) {
-		spin_unlock(&dinfo->int_lock);
-		return IRQ_RETVAL(0); /* not us */
-	}
-
-	/* clear status bits 0-15 ASAP and don't touch bits 16-31 */
-	OUTREG(PIPEASTAT, INREG(PIPEASTAT));
-
-	OUTREG16(IIR, tmp);
-	if (dinfo->vsync.pan_display) {
-		dinfo->vsync.pan_display = 0;
-		OUTREG(DSPABASE, dinfo->vsync.pan_offset);
-	}
-
-	dinfo->vsync.count++;
-	wake_up_interruptible(&dinfo->vsync.wait);
-
-	spin_unlock(&dinfo->int_lock);
-
-	return IRQ_RETVAL(1);
-}
-
-int intelfbhw_enable_irq(struct intelfb_info *dinfo)
-{
-	u16 tmp;
-	if (!test_and_set_bit(0, &dinfo->irq_flags)) {
-		if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
-				"intelfb", dinfo)) {
-			clear_bit(0, &dinfo->irq_flags);
-			return -EINVAL;
-		}
-
-		spin_lock_irq(&dinfo->int_lock);
-		OUTREG16(HWSTAM, 0xfffe); /* i830 DRM uses ffff */
-		OUTREG16(IMR, 0);
-	} else
-		spin_lock_irq(&dinfo->int_lock);
-
-	if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
-		tmp = PIPE_A_EVENT_INTERRUPT;
-	else
-		tmp = VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
-	if (tmp != INREG16(IER)) {
-		DBG_MSG("changing IER to 0x%X\n", tmp);
-		OUTREG16(IER, tmp);
-	}
-
-	spin_unlock_irq(&dinfo->int_lock);
-	return 0;
-}
-
-void intelfbhw_disable_irq(struct intelfb_info *dinfo)
-{
-	if (test_and_clear_bit(0, &dinfo->irq_flags)) {
-		if (dinfo->vsync.pan_display) {
-			dinfo->vsync.pan_display = 0;
-			OUTREG(DSPABASE, dinfo->vsync.pan_offset);
-		}
-		spin_lock_irq(&dinfo->int_lock);
-		OUTREG16(HWSTAM, 0xffff);
-		OUTREG16(IMR, 0xffff);
-		OUTREG16(IER, 0x0);
-
-		OUTREG16(IIR, INREG16(IIR)); /* clear IRQ requests */
-		spin_unlock_irq(&dinfo->int_lock);
-
-		free_irq(dinfo->pdev->irq, dinfo);
-	}
-}
-
-int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe)
-{
-	struct intelfb_vsync *vsync;
-	unsigned int count;
-	int ret;
-
-	switch (pipe) {
-		case 0:
-			vsync = &dinfo->vsync;
-			break;
-		default:
-			return -ENODEV;
-	}
-
-	ret = intelfbhw_enable_irq(dinfo);
-	if (ret)
-		return ret;
-
-	count = vsync->count;
-	ret = wait_event_interruptible_timeout(vsync->wait,
-					       count != vsync->count, HZ / 10);
-	if (ret < 0)
-		return ret;
-	if (ret == 0) {
-		DBG_MSG("wait_for_vsync timed out!\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
diff --git a/drivers/video/fbdev/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
deleted file mode 100644
index 216ca20f259f..000000000000
--- a/drivers/video/fbdev/intelfb/intelfbhw.h
+++ /dev/null
@@ -1,609 +0,0 @@
-#ifndef _INTELFBHW_H
-#define _INTELFBHW_H
-
-/* $DHD: intelfb/intelfbhw.h,v 1.5 2003/06/27 15:06:25 dawes Exp $ */
-
-
-/*** HW-specific data ***/
-
-/* Information about the 852GM/855GM variants */
-#define INTEL_85X_CAPID		0x44
-#define INTEL_85X_VARIANT_MASK		0x7
-#define INTEL_85X_VARIANT_SHIFT		5
-#define INTEL_VAR_855GME		0x0
-#define INTEL_VAR_855GM			0x4
-#define INTEL_VAR_852GME		0x2
-#define INTEL_VAR_852GM			0x5
-
-/* Information about DVO/LVDS Ports */
-#define DVOA_PORT  0x1
-#define DVOB_PORT  0x2
-#define DVOC_PORT  0x4
-#define LVDS_PORT  0x8
-
-/*
- * The Bridge device's PCI config space has information about the
- * fb aperture size and the amount of pre-reserved memory.
- */
-#define INTEL_GMCH_CTRL		0x52
-#define INTEL_GMCH_ENABLED		0x4
-#define INTEL_GMCH_MEM_MASK		0x1
-#define INTEL_GMCH_MEM_64M		0x1
-#define INTEL_GMCH_MEM_128M		0
-
-#define INTEL_830_GMCH_GMS_MASK		(0x7 << 4)
-#define INTEL_830_GMCH_GMS_DISABLED	(0x0 << 4)
-#define INTEL_830_GMCH_GMS_LOCAL	(0x1 << 4)
-#define INTEL_830_GMCH_GMS_STOLEN_512	(0x2 << 4)
-#define INTEL_830_GMCH_GMS_STOLEN_1024	(0x3 << 4)
-#define INTEL_830_GMCH_GMS_STOLEN_8192	(0x4 << 4)
-
-#define INTEL_855_GMCH_GMS_MASK		(0x7 << 4)
-#define INTEL_855_GMCH_GMS_DISABLED	(0x0 << 4)
-#define INTEL_855_GMCH_GMS_STOLEN_1M	(0x1 << 4)
-#define INTEL_855_GMCH_GMS_STOLEN_4M	(0x2 << 4)
-#define INTEL_855_GMCH_GMS_STOLEN_8M	(0x3 << 4)
-#define INTEL_855_GMCH_GMS_STOLEN_16M	(0x4 << 4)
-#define INTEL_855_GMCH_GMS_STOLEN_32M	(0x5 << 4)
-
-#define INTEL_915G_GMCH_GMS_STOLEN_48M	(0x6 << 4)
-#define INTEL_915G_GMCH_GMS_STOLEN_64M	(0x7 << 4)
-
-/* HW registers */
-
-/* Fence registers */
-#define FENCE			0x2000
-#define FENCE_NUM			8
-
-/* Primary ring buffer */
-#define PRI_RING_TAIL		0x2030
-#define RING_TAIL_MASK			0x001ffff8
-#define RING_INUSE			0x1
-
-#define PRI_RING_HEAD		0x2034
-#define RING_HEAD_WRAP_MASK		0x7ff
-#define RING_HEAD_WRAP_SHIFT		21
-#define RING_HEAD_MASK			0x001ffffc
-
-#define PRI_RING_START		0x2038
-#define RING_START_MASK			0xfffff000
-
-#define PRI_RING_LENGTH		0x203c
-#define RING_LENGTH_MASK		0x001ff000
-#define RING_REPORT_MASK		(0x3 << 1)
-#define RING_NO_REPORT			(0x0 << 1)
-#define RING_REPORT_64K			(0x1 << 1)
-#define RING_REPORT_4K			(0x2 << 1)
-#define RING_REPORT_128K		(0x3 << 1)
-#define RING_ENABLE			0x1
-
-/*
- * Tail can't wrap to any closer than RING_MIN_FREE bytes of the head,
- * and the last RING_MIN_FREE bytes need to be padded with MI_NOOP
- */
-#define RING_MIN_FREE			64
-
-#define IPEHR			0x2088
-
-#define INSTDONE		0x2090
-#define PRI_RING_EMPTY			1
-
-#define HWSTAM			0x2098
-#define IER			0x20A0
-#define IIR			0x20A4
-#define IMR			0x20A8
-#define VSYNC_PIPE_A_INTERRUPT		(1 << 7)
-#define PIPE_A_EVENT_INTERRUPT		(1 << 6)
-#define VSYNC_PIPE_B_INTERRUPT		(1 << 5)
-#define PIPE_B_EVENT_INTERRUPT		(1 << 4)
-#define HOST_PORT_EVENT_INTERRUPT	(1 << 3)
-#define CAPTURE_EVENT_INTERRUPT		(1 << 2)
-#define USER_DEFINED_INTERRUPT		(1 << 1)
-#define BREAKPOINT_INTERRUPT		1
-
-#define INSTPM			0x20c0
-#define SYNC_FLUSH_ENABLE		(1 << 5)
-
-#define INSTPS			0x20c4
-
-#define MEM_MODE		0x20cc
-
-#define MASK_SHIFT			16
-
-#define FW_BLC_0		0x20d8
-#define FW_DISPA_WM_SHIFT		0
-#define FW_DISPA_WM_MASK		0x3f
-#define FW_DISPA_BL_SHIFT		8
-#define FW_DISPA_BL_MASK		0xf
-#define FW_DISPB_WM_SHIFT		16
-#define FW_DISPB_WM_MASK		0x1f
-#define FW_DISPB_BL_SHIFT		24
-#define FW_DISPB_BL_MASK		0x7
-
-#define FW_BLC_1		0x20dc
-#define FW_DISPC_WM_SHIFT		0
-#define FW_DISPC_WM_MASK		0x1f
-#define FW_DISPC_BL_SHIFT		8
-#define FW_DISPC_BL_MASK		0x7
-
-#define GPIOA             0x5010
-#define GPIOB             0x5014
-#define GPIOC             0x5018 /* this may be external DDC on i830 */
-#define GPIOD             0x501C /* this is DVO DDC */
-#define GPIOE             0x5020 /* this is DVO i2C */
-#define GPIOF             0x5024
-
-/* PLL registers */
-#define VGA0_DIVISOR		0x06000
-#define VGA1_DIVISOR		0x06004
-#define VGAPD			0x06010
-#define VGAPD_0_P1_SHIFT		0
-#define VGAPD_0_P1_FORCE_DIV2		(1 << 5)
-#define VGAPD_0_P2_SHIFT		7
-#define VGAPD_1_P1_SHIFT		8
-#define VGAPD_1_P1_FORCE_DIV2		(1 << 13)
-#define VGAPD_1_P2_SHIFT		15
-
-#define DPLL_A			0x06014
-#define DPLL_B			0x06018
-#define DPLL_VCO_ENABLE			(1 << 31)
-#define DPLL_2X_CLOCK_ENABLE		(1 << 30)
-#define DPLL_SYNCLOCK_ENABLE		(1 << 29)
-#define DPLL_VGA_MODE_DISABLE		(1 << 28)
-#define DPLL_P2_MASK			1
-#define DPLL_P2_SHIFT			23
-#define DPLL_I9XX_P2_SHIFT              24
-#define DPLL_P1_FORCE_DIV2		(1 << 21)
-#define DPLL_P1_MASK			0x1f
-#define DPLL_P1_SHIFT			16
-#define DPLL_REFERENCE_SELECT_MASK	(0x3 << 13)
-#define DPLL_REFERENCE_DEFAULT		(0x0 << 13)
-#define DPLL_REFERENCE_TVCLK		(0x2 << 13)
-#define DPLL_RATE_SELECT_MASK		(1 << 8)
-#define DPLL_RATE_SELECT_FP0		(0 << 8)
-#define DPLL_RATE_SELECT_FP1		(1 << 8)
-
-#define FPA0			0x06040
-#define FPA1			0x06044
-#define FPB0			0x06048
-#define FPB1			0x0604c
-#define FP_DIVISOR_MASK			0x3f
-#define FP_N_DIVISOR_SHIFT		16
-#define FP_M1_DIVISOR_SHIFT		8
-#define FP_M2_DIVISOR_SHIFT		0
-
-/* PLL parameters (these are for 852GM/855GM/865G, check earlier chips). */
-/* Clock values are in units of kHz */
-#define PLL_REFCLK		48000
-#define MIN_CLOCK		25000
-#define MAX_CLOCK		350000
-
-/* Two pipes */
-#define PIPE_A			0
-#define PIPE_B			1
-#define PIPE_MASK		1
-
-/* palette registers */
-#define PALETTE_A		0x0a000
-#define PALETTE_B		0x0a800
-#ifndef PALETTE_8_ENTRIES
-#define PALETTE_8_ENTRIES		256
-#endif
-#define PALETTE_8_SIZE			(PALETTE_8_ENTRIES * 4)
-#define PALETTE_10_ENTRIES		128
-#define PALETTE_10_SIZE			(PALETTE_10_ENTRIES * 8)
-#define PALETTE_8_MASK			0xff
-#define PALETTE_8_RED_SHIFT		16
-#define PALETTE_8_GREEN_SHIFT		8
-#define PALETTE_8_BLUE_SHIFT		0
-
-/* CRTC registers */
-#define HTOTAL_A		0x60000
-#define HBLANK_A		0x60004
-#define HSYNC_A			0x60008
-#define VTOTAL_A		0x6000c
-#define VBLANK_A		0x60010
-#define VSYNC_A			0x60014
-#define SRC_SIZE_A		0x6001c
-#define BCLRPAT_A		0x60020
-
-#define HTOTAL_B		0x61000
-#define HBLANK_B		0x61004
-#define HSYNC_B			0x61008
-#define VTOTAL_B		0x6100c
-#define VBLANK_B		0x61010
-#define VSYNC_B			0x61014
-#define SRC_SIZE_B		0x6101c
-#define BCLRPAT_B		0x61020
-
-#define HTOTAL_MASK			0xfff
-#define HTOTAL_SHIFT			16
-#define HACTIVE_MASK			0x7ff
-#define HACTIVE_SHIFT			0
-#define HBLANKEND_MASK			0xfff
-#define HBLANKEND_SHIFT			16
-#define HBLANKSTART_MASK		0xfff
-#define HBLANKSTART_SHIFT		0
-#define HSYNCEND_MASK			0xfff
-#define HSYNCEND_SHIFT			16
-#define HSYNCSTART_MASK			0xfff
-#define HSYNCSTART_SHIFT		0
-#define VTOTAL_MASK			0xfff
-#define VTOTAL_SHIFT			16
-#define VACTIVE_MASK			0x7ff
-#define VACTIVE_SHIFT			0
-#define VBLANKEND_MASK			0xfff
-#define VBLANKEND_SHIFT			16
-#define VBLANKSTART_MASK		0xfff
-#define VBLANKSTART_SHIFT		0
-#define VSYNCEND_MASK			0xfff
-#define VSYNCEND_SHIFT			16
-#define VSYNCSTART_MASK			0xfff
-#define VSYNCSTART_SHIFT		0
-#define SRC_SIZE_HORIZ_MASK		0x7ff
-#define SRC_SIZE_HORIZ_SHIFT		16
-#define SRC_SIZE_VERT_MASK		0x7ff
-#define SRC_SIZE_VERT_SHIFT		0
-
-#define ADPA			0x61100
-#define ADPA_DAC_ENABLE			(1 << 31)
-#define ADPA_DAC_DISABLE		0
-#define ADPA_PIPE_SELECT_SHIFT		30
-#define ADPA_USE_VGA_HVPOLARITY		(1 << 15)
-#define ADPA_SETS_HVPOLARITY		0
-#define ADPA_DPMS_CONTROL_MASK		(0x3 << 10)
-#define ADPA_DPMS_D0			(0x0 << 10)
-#define ADPA_DPMS_D2			(0x1 << 10)
-#define ADPA_DPMS_D1			(0x2 << 10)
-#define ADPA_DPMS_D3			(0x3 << 10)
-#define ADPA_VSYNC_ACTIVE_SHIFT		4
-#define ADPA_HSYNC_ACTIVE_SHIFT		3
-#define ADPA_SYNC_ACTIVE_MASK		1
-#define ADPA_SYNC_ACTIVE_HIGH		1
-#define ADPA_SYNC_ACTIVE_LOW		0
-
-#define DVOA			0x61120
-#define DVOB			0x61140
-#define DVOC			0x61160
-#define LVDS			0x61180
-#define PORT_ENABLE		        (1 << 31)
-#define PORT_PIPE_SELECT_SHIFT	        30
-#define PORT_TV_FLAGS_MASK              0xFF
-#define PORT_TV_FLAGS                   0xC4	/* ripped from my BIOS
-						   to understand and correct */
-
-#define DVOA_SRCDIM		0x61124
-#define DVOB_SRCDIM		0x61144
-#define DVOC_SRCDIM		0x61164
-
-#define PIPEA_DSL		0x70000
-#define PIPEB_DSL		0x71000
-#define PIPEACONF		0x70008
-#define PIPEBCONF		0x71008
-#define PIPEASTAT		0x70024 /* bits 0-15 are "write 1 to clear" */
-#define PIPEBSTAT		0x71024
-
-#define PIPECONF_ENABLE			(1 << 31)
-#define PIPECONF_DISABLE		0
-#define PIPECONF_DOUBLE_WIDE		(1 << 30)
-#define PIPECONF_SINGLE_WIDE		0
-#define PIPECONF_LOCKED			(1 << 25)
-#define PIPECONF_UNLOCKED		0
-#define PIPECONF_GAMMA			(1 << 24)
-#define PIPECONF_PALETTE		0
-#define PIPECONF_PROGRESSIVE			(0 << 21)
-#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
-#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
-#define PIPECONF_INTERLACE_MASK			(7 << 21)
-
-/* enable bits, write 1 to enable */
-#define PIPESTAT_FIFO_UNDERRUN		(1 << 31)
-#define PIPESTAT_CRC_ERROR_EN		(1 << 29)
-#define PIPESTAT_CRC_DONE_EN		(1 << 28)
-#define PIPESTAT_HOTPLUG_EN		(1 << 26)
-#define PIPESTAT_VERTICAL_SYNC_EN	(1 << 25)
-#define PIPESTAT_DISPLINE_COMP_EN	(1 << 24)
-#define PIPESTAT_FLD_EVT_ODD_EN		(1 << 21)
-#define PIPESTAT_FLD_EVT_EVEN_EN	(1 << 20)
-#define PIPESTAT_TV_HOTPLUG_EN		(1 << 18)
-#define PIPESTAT_VBLANK_EN		(1 << 17)
-#define PIPESTAT_OVL_UPDATE_EN		(1 << 16)
-/* status bits, write 1 to clear */
-#define PIPESTAT_HOTPLUG_STATE		(1 << 15)
-#define PIPESTAT_CRC_ERROR		(1 << 13)
-#define PIPESTAT_CRC_DONE		(1 << 12)
-#define PIPESTAT_HOTPLUG		(1 << 10)
-#define PIPESTAT_VSYNC			(1 << 9)
-#define PIPESTAT_DISPLINE_COMP		(1 << 8)
-#define PIPESTAT_FLD_EVT_ODD		(1 << 5)
-#define PIPESTAT_FLD_EVT_EVEN		(1 << 4)
-#define PIPESTAT_TV_HOTPLUG		(1 << 2)
-#define PIPESTAT_VBLANK			(1 << 1)
-#define PIPESTAT_OVL_UPDATE		(1 << 0)
-
-#define DISPARB			0x70030
-#define DISPARB_AEND_MASK		0x1ff
-#define DISPARB_AEND_SHIFT		0
-#define DISPARB_BEND_MASK		0x3ff
-#define DISPARB_BEND_SHIFT		9
-
-/* Desktop HW cursor */
-#define CURSOR_CONTROL		0x70080
-#define CURSOR_ENABLE			(1 << 31)
-#define CURSOR_GAMMA_ENABLE		(1 << 30)
-#define CURSOR_STRIDE_MASK		(0x3 << 28)
-#define CURSOR_STRIDE_256		(0x0 << 28)
-#define CURSOR_STRIDE_512		(0x1 << 28)
-#define CURSOR_STRIDE_1K		(0x2 << 28)
-#define CURSOR_STRIDE_2K		(0x3 << 28)
-#define CURSOR_FORMAT_MASK		(0x7 << 24)
-#define CURSOR_FORMAT_2C		(0x0 << 24)
-#define CURSOR_FORMAT_3C		(0x1 << 24)
-#define CURSOR_FORMAT_4C		(0x2 << 24)
-#define CURSOR_FORMAT_ARGB		(0x4 << 24)
-#define CURSOR_FORMAT_XRGB		(0x5 << 24)
-
-/* Mobile HW cursor (and i810) */
-#define CURSOR_A_CONTROL	CURSOR_CONTROL
-#define CURSOR_B_CONTROL	0x700c0
-#define CURSOR_MODE_MASK		0x27
-#define CURSOR_MODE_DISABLE		0
-#define CURSOR_MODE_64_3C		0x04
-#define CURSOR_MODE_64_4C_AX		0x05
-#define CURSOR_MODE_64_4C		0x06
-#define CURSOR_MODE_64_32B_AX		0x07
-#define CURSOR_MODE_64_ARGB_AX		0x27
-#define CURSOR_PIPE_SELECT_SHIFT	28
-#define CURSOR_MOBILE_GAMMA_ENABLE	(1 << 26)
-#define CURSOR_MEM_TYPE_LOCAL		(1 << 25)
-
-/* All platforms (desktop has no pipe B) */
-#define CURSOR_A_BASEADDR	0x70084
-#define CURSOR_B_BASEADDR	0x700c4
-#define CURSOR_BASE_MASK		0xffffff00
-
-#define CURSOR_A_POSITION	0x70088
-#define CURSOR_B_POSITION	0x700c8
-#define CURSOR_POS_SIGN			(1 << 15)
-#define CURSOR_POS_MASK			0x7ff
-#define CURSOR_X_SHIFT			0
-#define CURSOR_Y_SHIFT			16
-
-#define CURSOR_A_PALETTE0	0x70090
-#define CURSOR_A_PALETTE1	0x70094
-#define CURSOR_A_PALETTE2	0x70098
-#define CURSOR_A_PALETTE3	0x7009c
-#define CURSOR_B_PALETTE0	0x700d0
-#define CURSOR_B_PALETTE1	0x700d4
-#define CURSOR_B_PALETTE2	0x700d8
-#define CURSOR_B_PALETTE3	0x700dc
-#define CURSOR_COLOR_MASK			0xff
-#define CURSOR_RED_SHIFT			16
-#define CURSOR_GREEN_SHIFT			8
-#define CURSOR_BLUE_SHIFT			0
-#define CURSOR_PALETTE_MASK			0xffffff
-
-/* Desktop only */
-#define CURSOR_SIZE		0x700a0
-#define CURSOR_SIZE_MASK		0x3ff
-#define CURSOR_SIZE_H_SHIFT		0
-#define CURSOR_SIZE_V_SHIFT		12
-
-#define DSPACNTR		0x70180
-#define DSPBCNTR		0x71180
-#define DISPPLANE_PLANE_ENABLE		(1 << 31)
-#define DISPPLANE_PLANE_DISABLE		0
-#define DISPPLANE_GAMMA_ENABLE		(1<<30)
-#define DISPPLANE_GAMMA_DISABLE		0
-#define DISPPLANE_PIXFORMAT_MASK	(0xf<<26)
-#define DISPPLANE_8BPP			(0x2<<26)
-#define DISPPLANE_15_16BPP		(0x4<<26)
-#define DISPPLANE_16BPP			(0x5<<26)
-#define DISPPLANE_32BPP_NO_ALPHA	(0x6<<26)
-#define DISPPLANE_32BPP			(0x7<<26)
-#define DISPPLANE_STEREO_ENABLE		(1<<25)
-#define DISPPLANE_STEREO_DISABLE	0
-#define DISPPLANE_SEL_PIPE_SHIFT	24
-#define DISPPLANE_SRC_KEY_ENABLE	(1<<22)
-#define DISPPLANE_SRC_KEY_DISABLE	0
-#define DISPPLANE_LINE_DOUBLE		(1<<20)
-#define DISPPLANE_NO_LINE_DOUBLE	0
-#define DISPPLANE_STEREO_POLARITY_FIRST	0
-#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
-/* plane B only */
-#define DISPPLANE_ALPHA_TRANS_ENABLE	(1<<15)
-#define DISPPLANE_ALPHA_TRANS_DISABLE	0
-#define DISPPLANE_SPRITE_ABOVE_DISPLAYA	0
-#define DISPPLANE_SPRITE_ABOVE_OVERLAY	1
-
-#define DSPABASE		0x70184
-#define DSPASTRIDE		0x70188
-
-#define DSPBBASE		0x71184
-#define DSPBSTRIDE		0x71188
-
-#define VGACNTRL		0x71400
-#define VGA_DISABLE			(1 << 31)
-#define VGA_ENABLE			0
-#define VGA_PIPE_SELECT_SHIFT		29
-#define VGA_PALETTE_READ_SELECT		23
-#define VGA_PALETTE_A_WRITE_DISABLE	(1 << 22)
-#define VGA_PALETTE_B_WRITE_DISABLE	(1 << 21)
-#define VGA_LEGACY_PALETTE		(1 << 20)
-#define VGA_6BIT_DAC			0
-#define VGA_8BIT_DAC			(1 << 20)
-
-#define ADD_ID			0x71408
-#define ADD_ID_MASK			0xff
-
-/* BIOS scratch area registers (830M and 845G). */
-#define SWF0			0x71410
-#define SWF1			0x71414
-#define SWF2			0x71418
-#define SWF3			0x7141c
-#define SWF4			0x71420
-#define SWF5			0x71424
-#define SWF6			0x71428
-
-/* BIOS scratch area registers (852GM, 855GM, 865G). */
-#define SWF00			0x70410
-#define SWF01			0x70414
-#define SWF02			0x70418
-#define SWF03			0x7041c
-#define SWF04			0x70420
-#define SWF05			0x70424
-#define SWF06			0x70428
-
-#define SWF10			SWF0
-#define SWF11			SWF1
-#define SWF12			SWF2
-#define SWF13			SWF3
-#define SWF14			SWF4
-#define SWF15			SWF5
-#define SWF16			SWF6
-
-#define SWF30			0x72414
-#define SWF31			0x72418
-#define SWF32			0x7241c
-
-/* Memory Commands */
-#define MI_NOOP			(0x00 << 23)
-#define MI_NOOP_WRITE_ID		(1 << 22)
-#define MI_NOOP_ID_MASK			((1 << 22) - 1)
-
-#define MI_FLUSH		(0x04 << 23)
-#define MI_WRITE_DIRTY_STATE		(1 << 4)
-#define MI_END_SCENE			(1 << 3)
-#define MI_INHIBIT_RENDER_CACHE_FLUSH	(1 << 2)
-#define MI_INVALIDATE_MAP_CACHE		(1 << 0)
-
-#define MI_STORE_DWORD_IMM	((0x20 << 23) | 1)
-
-/* 2D Commands */
-#define COLOR_BLT_CMD		((2 << 29) | (0x40 << 22) | 3)
-#define XY_COLOR_BLT_CMD	((2 << 29) | (0x50 << 22) | 4)
-#define XY_SETUP_CLIP_BLT_CMD	((2 << 29) | (0x03 << 22) | 1)
-#define XY_SRC_COPY_BLT_CMD	((2 << 29) | (0x53 << 22) | 6)
-#define SRC_COPY_BLT_CMD	((2 << 29) | (0x43 << 22) | 4)
-#define XY_MONO_PAT_BLT_CMD	((2 << 29) | (0x52 << 22) | 7)
-#define XY_MONO_SRC_BLT_CMD	((2 << 29) | (0x54 << 22) | 6)
-#define XY_MONO_SRC_IMM_BLT_CMD	((2 << 29) | (0x71 << 22) | 5)
-#define TXT_IMM_BLT_CMD	        ((2 << 29) | (0x30 << 22) | 2)
-#define SETUP_BLT_CMD	        ((2 << 29) | (0x00 << 22) | 6)
-
-#define DW_LENGTH_MASK			0xff
-
-#define WRITE_ALPHA			(1 << 21)
-#define WRITE_RGB			(1 << 20)
-#define VERT_SEED			(3 << 8)
-#define HORIZ_SEED			(3 << 12)
-
-#define COLOR_DEPTH_8			(0 << 24)
-#define COLOR_DEPTH_16			(1 << 24)
-#define COLOR_DEPTH_32			(3 << 24)
-
-#define SRC_ROP_GXCOPY			0xcc
-#define SRC_ROP_GXXOR			0x66
-
-#define PAT_ROP_GXCOPY                  0xf0
-#define PAT_ROP_GXXOR                   0x5a
-
-#define PITCH_SHIFT			0
-#define ROP_SHIFT			16
-#define WIDTH_SHIFT			0
-#define HEIGHT_SHIFT			16
-
-/* in bytes */
-#define MAX_MONO_IMM_SIZE		128
-
-
-/*** Macros ***/
-
-/* I/O macros */
-#define INREG8(addr)	      readb((u8 __iomem *)(dinfo->mmio_base + (addr)))
-#define INREG16(addr)	      readw((u16 __iomem *)(dinfo->mmio_base + (addr)))
-#define INREG(addr)	      readl((u32 __iomem *)(dinfo->mmio_base + (addr)))
-#define OUTREG8(addr, val)    writeb((val),(u8 __iomem *)(dinfo->mmio_base + \
-							   (addr)))
-#define OUTREG16(addr, val)    writew((val),(u16 __iomem *)(dinfo->mmio_base + \
-							   (addr)))
-#define OUTREG(addr, val)     writel((val),(u32 __iomem *)(dinfo->mmio_base + \
-                                     (addr)))
-
-/* Ring buffer macros */
-#define OUT_RING(n)	do {						\
-	writel((n), (u32 __iomem *)(dinfo->ring.virtual + dinfo->ring_tail));\
-	dinfo->ring_tail += 4;						\
-	dinfo->ring_tail &= dinfo->ring_tail_mask;			\
-} while (0)
-
-#define START_RING(n)	do {						\
-	if (dinfo->ring_space < (n) * 4)				\
-		wait_ring(dinfo,(n) * 4);				\
-	dinfo->ring_space -= (n) * 4;					\
-} while (0)
-
-#define ADVANCE_RING()	do {						\
-	OUTREG(PRI_RING_TAIL, dinfo->ring_tail);                        \
-} while (0)
-
-#define DO_RING_IDLE()	do {						\
-	u32 head, tail;							\
-	do {								\
-		head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;		\
-		tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;		\
-		udelay(10);						\
-	} while (head != tail);						\
-} while (0)
-
-
-/* function protoypes */
-extern int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo);
-extern int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
-				int *stolen_size);
-extern int intelfbhw_check_non_crt(struct intelfb_info *dinfo);
-extern const char *intelfbhw_dvo_to_string(int dvo);
-extern int intelfbhw_validate_mode(struct intelfb_info *dinfo,
-				   struct fb_var_screeninfo *var);
-extern int intelfbhw_pan_display(struct fb_var_screeninfo *var,
-				 struct fb_info *info);
-extern void intelfbhw_do_blank(int blank, struct fb_info *info);
-extern void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
-				unsigned red, unsigned green, unsigned blue,
-				unsigned transp);
-extern int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
-				   struct intelfb_hwstate *hw, int flag);
-extern void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
-				     struct intelfb_hwstate *hw);
-extern int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
-				struct intelfb_hwstate *hw,
-				struct fb_var_screeninfo *var);
-extern int intelfbhw_program_mode(struct intelfb_info *dinfo,
-				  const struct intelfb_hwstate *hw, int blank);
-extern void intelfbhw_do_sync(struct intelfb_info *dinfo);
-extern void intelfbhw_2d_stop(struct intelfb_info *dinfo);
-extern void intelfbhw_2d_start(struct intelfb_info *dinfo);
-extern void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y,
-				  u32 w, u32 h, u32 color, u32 pitch, u32 bpp,
-				  u32 rop);
-extern void intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
-				u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch,
-				u32 bpp);
-extern int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg,
-				  u32 w, u32 h, const u8* cdat, u32 x, u32 y,
-				  u32 pitch, u32 bpp);
-extern void intelfbhw_cursor_init(struct intelfb_info *dinfo);
-extern void intelfbhw_cursor_hide(struct intelfb_info *dinfo);
-extern void intelfbhw_cursor_show(struct intelfb_info *dinfo);
-extern void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y);
-extern void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg,
-				      u32 fg);
-extern void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width,
-				  int height, u8 *data);
-extern void intelfbhw_cursor_reset(struct intelfb_info *dinfo);
-extern int intelfbhw_enable_irq(struct intelfb_info *dinfo);
-extern void intelfbhw_disable_irq(struct intelfb_info *dinfo);
-extern int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe);
-extern int intelfbhw_active_pipe(const struct intelfb_hwstate *hw);
-
-#endif /* _INTELFBHW_H */
