@@ -236,9 +236,9 @@ static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
struct ad7606_state *st = iio_priv(indio_dev);
DECLARE_BITMAP(values, 3);
- values[0] = val;
+ values[0] = val & GENMASK(2, 0);
- gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+ gpiod_set_array_value(st->gpio_os->ndescs, st->gpio_os->desc,
st->gpio_os->info, values);
/* AD7616 requires a reset to update value */
@@ -249,8 +249,9 @@ static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
{
struct ad7606_state *st = iio_priv(indio_dev);
- unsigned long os[3] = {1};
+ DECLARE_BITMAP(os, 3);
+ bitmap_fill(os, 3);
/*
* Software mode is enabled when all three oversampling
* pins are set to high. If oversampling gpios are defined
@@ -258,7 +259,7 @@ static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
* otherwise, they must be hardwired to VDD
*/
if (st->gpio_os) {
- gpiod_set_array_value(ARRAY_SIZE(os),
+ gpiod_set_array_value(st->gpio_os->ndescs,
st->gpio_os->desc, st->gpio_os->info, os);
}
/* OS of 128 and 256 are available only in software mode */
gpiod_set_array_value was misused here: the implementation relied on the assumption that an unsigned long was required for each gpio, while the function expects a bit array stored in "as much unsigned long as needed for storing one bit per GPIO", i.e it is using a bit field. Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") Signed-off-by: Guillaume Stols <gstols@baylibre.com> --- drivers/iio/adc/ad7606.c | 4 ++-- drivers/iio/adc/ad7606_spi.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-)