diff mbox series

[v2,09/10] iio: adc: ad7606: fix standby gpio state to match the documentation

Message ID 20240628-cleanup-ad7606-v2-9-96e02f90256d@baylibre.com (mailing list archive)
State Not Applicable
Headers show
Series iio: adc: ad7606: Improvements | expand

Commit Message

Guillaume Stols June 28, 2024, 2:48 p.m. UTC
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation

Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
---
 drivers/iio/adc/ad7606.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index 8cce1fad9763..50ccc245e314 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -443,7 +443,7 @@  static int ad7606_request_gpios(struct ad7606_state *st)
 		return PTR_ERR(st->gpio_range);
 
 	st->gpio_standby = devm_gpiod_get_optional(dev, "standby",
-						   GPIOD_OUT_HIGH);
+						   GPIOD_OUT_LOW);
 	if (IS_ERR(st->gpio_standby))
 		return PTR_ERR(st->gpio_standby);
 
@@ -686,7 +686,7 @@  static int ad7606_suspend(struct device *dev)
 
 	if (st->gpio_standby) {
 		gpiod_set_value(st->gpio_range, 1);
-		gpiod_set_value(st->gpio_standby, 0);
+		gpiod_set_value(st->gpio_standby, 1);
 	}
 
 	return 0;