| Message ID | 20240702-cleanup-ad7606-v3-6-57fd02a4e2aa@baylibre.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | iio: adc: ad7606: Improvements | expand |
On Tue, 2024-07-02 at 17:34 +0000, Guillaume Stols wrote: > gpiod_set_array_value was misused here: the implementation relied on the > assumption that an unsigned long was required for each gpio, while the > function expects a bit array stored in "as much unsigned long as needed > for storing one bit per GPIO", i.e it is using a bit field. > > This leaded to incorrect parameter passed to gpiod_set_array_value, that > would set 1 value instead of 3. > It also prevents to select the software mode correctly for the AD7606B. > > Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") > Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro") > Signed-off-by: Guillaume Stols <gstols@baylibre.com> > --- Reviewed-by: Nuno Sa <nuno.sa@analog.com>
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index 3a417595294f..8cce1fad9763 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -236,9 +236,9 @@ static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val) struct ad7606_state *st = iio_priv(indio_dev); DECLARE_BITMAP(values, 3); - values[0] = val; + values[0] = val & GENMASK(2, 0); - gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + gpiod_set_array_value(st->gpio_os->ndescs, st->gpio_os->desc, st->gpio_os->info, values); /* AD7616 requires a reset to update value */ diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c index 263a778bcf25..287a0591533b 100644 --- a/drivers/iio/adc/ad7606_spi.c +++ b/drivers/iio/adc/ad7606_spi.c @@ -249,8 +249,9 @@ static int ad7616_sw_mode_config(struct iio_dev *indio_dev) static int ad7606B_sw_mode_config(struct iio_dev *indio_dev) { struct ad7606_state *st = iio_priv(indio_dev); - unsigned long os[3] = {1}; + DECLARE_BITMAP(os, 3); + bitmap_fill(os, 3); /* * Software mode is enabled when all three oversampling * pins are set to high. If oversampling gpios are defined @@ -258,7 +259,7 @@ static int ad7606B_sw_mode_config(struct iio_dev *indio_dev) * otherwise, they must be hardwired to VDD */ if (st->gpio_os) { - gpiod_set_array_value(ARRAY_SIZE(os), + gpiod_set_array_value(st->gpio_os->ndescs, st->gpio_os->desc, st->gpio_os->info, os); } /* OS of 128 and 256 are available only in software mode */
gpiod_set_array_value was misused here: the implementation relied on the assumption that an unsigned long was required for each gpio, while the function expects a bit array stored in "as much unsigned long as needed for storing one bit per GPIO", i.e it is using a bit field. This leaded to incorrect parameter passed to gpiod_set_array_value, that would set 1 value instead of 3. It also prevents to select the software mode correctly for the AD7606B. Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro") Signed-off-by: Guillaume Stols <gstols@baylibre.com> --- drivers/iio/adc/ad7606.c | 4 ++-- drivers/iio/adc/ad7606_spi.c | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-)