mbox series

[v2,0/2] spi: add BMC support for Intel D5005 card

Message ID 20210413225835.459662-1-matthew.gerlach@linux.intel.com (mailing list archive)
Headers show
Series spi: add BMC support for Intel D5005 card | expand

Message

Matthew Gerlach April 13, 2021, 10:58 p.m. UTC 
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

This patch set adds support for the Board Management Controller (BMC)
of an Intel D5005 card.  The BMC support requires a Device Feature
List (DFL) bus driver for the Altera SPI Master controller and hwmon
support for the sensors monitored by the BMC.

Patch 1 adds a dfl driver for the Altera SPI Master which is connected
to the board's BMC.

Patch 2 adds hwmon support for the sensors monitored by the board's BMC.
---
v2: move drivers/fpga/dfl-spi-altera.c to drivers/spi/spi-altera-dfl.c
    change variable name from m10bmc_bmc_subdevs to m10bmc_d5005_subdevs
    added Acked-by: Lee Jones

Matthew Gerlach (2):
  spi: Add DFL bus driver for Altera SPI Master
  hwmon: intel-m10-bmc-hwmon: add sensor support of Intel D5005 card

 drivers/hwmon/intel-m10-bmc-hwmon.c | 122 ++++++++++++++++++++
 drivers/mfd/intel-m10-bmc.c         |  10 ++
 drivers/spi/Kconfig                 |   9 ++
 drivers/spi/Makefile                |   1 +
 drivers/spi/spi-altera-dfl.c        | 221 ++++++++++++++++++++++++++++++++++++
 5 files changed, 363 insertions(+)
 create mode 100644 drivers/spi/spi-altera-dfl.c