[v13,0/3] Microchip Polarfire FPGA manager

Message

Ivan Bornyakov May 26, 2022, 6:13 p.m. UTC

Add support to the FPGA manager for programming Microchip Polarfire
FPGAs over slave SPI interface with .dat formatted bitsream image.

Changelog:
  v1 -> v2: fix printk formating
  v2 -> v3:
   * replace "microsemi" with "microchip"
   * replace prefix "microsemi_fpga_" with "mpf_"
   * more sensible .compatible and .name strings
   * remove unused defines STATUS_SPI_VIOLATION and STATUS_SPI_ERROR
  v3 -> v4: fix unused variable warning
    Put 'mpf_of_ids' definition under conditional compilation, so it
    would not hang unused if CONFIG_OF is not enabled.
  v4 -> v5:
   * prefix defines with MPF_
   * mdelay() -> usleep_range()
   * formatting fixes
   * add DT bindings doc
   * rework fpga_manager_ops.write() to fpga_manager_ops.write_sg()
     We can't parse image header in write_init() because image header
     size is not known beforehand. Thus parsing need to be done in
     fpga_manager_ops.write() callback, but fpga_manager_ops.write()
     also need to be reenterable. On the other hand,
     fpga_manager_ops.write_sg() is called once. Thus, rework usage of
     write() callback to write_sg().
  v5 -> v6: fix patch applying
     I forgot to clean up unrelated local changes which lead to error on
     patch 0001-fpga-microchip-spi-add-Microchip-MPF-FPGA-manager.patch
     applying on vanilla kernel.
  v6 -> v7: fix binding doc to pass dt_binding_check
  v7 -> v8: another fix for dt_binding_check warning
  v8 -> v9:
   * add another patch to support bitstream offset in FPGA image buffer
   * rework fpga_manager_ops.write_sg() back to fpga_manager_ops.write()
   * move image header parsing from write() to write_init()
  v9 -> v10:
   * add parse_header() callback to fpga_manager_ops
   * adjust fpga_mgr_write_init[_buf|_sg]() for parse_header() usage
   * implement parse_header() in microchip-spi driver
  v10 -> v11: include missing unaligned.h to microchip-spi
     fix error: implicit declaration of function 'get_unaligned_le[16|32]'
  v11 -> v12:
   * microchip-spi: double read hw status, ignore first read, because it
     can be unreliable.
   * microchip-spi: remove sleep between status readings in
     poll_status_not_busy() to save a few seconds. Status is polled on
     every 16 byte writes - that is quite often, therefore
     usleep_range() accumulate to a considerable number of seconds.
  v12 -> v13:
   * fpga-mgr: separate fpga_mgr_parse_header_buf() from
     fpga_mgr_write_init_buf()
   * fpga-mgr: introduce FPGA_MGR_STATE_PARSE_HEADER and
     FPGA_MGR_STATE_PARSE_HEADER_ERR fpga_mgr_states
   * fpga-mgr: rename fpga_mgr_write_init_sg() to fpga_mgr_prepare_sg()
     and rework with respect to a new fpga_mgr_parse_header_buf()
   * fpga-mgr: rework write accounting in fpga_mgr_buf_load_sg() for
     better clarity
   * microchip-spi: rename MPF_STATUS_POLL_TIMEOUT to
     MPF_STATUS_POLL_RETRIES
   * microchip-spi: add comment about status reading quirk to
     mpf_read_status()
   * microchip-spi: rename poll_status_not_busy() to mpf_poll_status()
     and add comment.
   * microchip-spi: make if statement in mpf_poll_status() easier to
     read.

Ivan Bornyakov (3):
  fpga: fpga-mgr: support bitstream offset in image buffer
  fpga: microchip-spi: add Microchip MPF FPGA manager
  dt-bindings: fpga: add binding doc for microchip-spi fpga mgr

 .../fpga/microchip,mpf-spi-fpga-mgr.yaml      |  44 ++
 drivers/fpga/Kconfig                          |   9 +
 drivers/fpga/Makefile                         |   1 +
 drivers/fpga/fpga-mgr.c                       | 174 ++++++--
 drivers/fpga/microchip-spi.c                  | 386 ++++++++++++++++++
 include/linux/fpga/fpga-mgr.h                 |  17 +-
 6 files changed, 599 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
 create mode 100644 drivers/fpga/microchip-spi.c