mbox series

[v4,0/3] Add Efinix FPGA SPI programming support

Message ID 20250228094732.54642-1-iansdannapel@gmail.com (mailing list archive)
Headers show
Series Add Efinix FPGA SPI programming support | expand

Message

Ian Dannapel Feb. 28, 2025, 9:47 a.m. UTC 
From: Ian Dannapel <iansdannapel@gmail.com>

This patch series introduces support for Efinix FPGA devices
through SPI-based programming.

Currently, only Trion devices are tested. Topaz and Titanium series are 
theoretically supported because of the similarity with Trion, but the
driver is only documentation based.

Changes since v3:
- major rework on the driver spi write approach
    - indirect CS assert using spi_transfer instead of duplicating the
  SPI controller property
  - locked SPI bus transfer to avoid possible conflicts with other
  devices on the bus
- file name and compatible strings renamed to better match device
- minor improvements/fixes


Ian Dannapel (3):
  dt-bindings: vendor-prefix: Add prefix for Efinix, Inc.
  dt-bindings: fpga: Add Efinix SPI programming bindings
  fpga-mgr: Add Efinix SPI programming driver

 .../devicetree/bindings/fpga/efinix,spi.yaml  |  81 +++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/fpga/Kconfig                          |   7 +
 drivers/fpga/Makefile                         |   1 +
 drivers/fpga/efinix-spi.c                     | 212 ++++++++++++++++++
 5 files changed, 303 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/efinix,spi.yaml
 create mode 100644 drivers/fpga/efinix-spi.c