From patchwork Sun Apr 30 19:08:37 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anatolij Gustschin X-Patchwork-Id: 9706199 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id ECE59602B5 for ; Sun, 30 Apr 2017 19:08:59 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D793A212BE for ; Sun, 30 Apr 2017 19:08:59 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id CB01726247; Sun, 30 Apr 2017 19:08:59 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.4 required=2.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RCVD_IN_SORBS_SPAM autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 149E4212BE for ; Sun, 30 Apr 2017 19:08:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161970AbdD3TIr (ORCPT ); Sun, 30 Apr 2017 15:08:47 -0400 Received: from mail-out.m-online.net ([212.18.0.9]:45037 "EHLO mail-out.m-online.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S969955AbdD3TIp (ORCPT ); Sun, 30 Apr 2017 15:08:45 -0400 Received: from frontend01.mail.m-online.net (unknown [192.168.8.182]) by mail-out.m-online.net (Postfix) with ESMTP id 3wGHCF3QNmz1qrNL; Sun, 30 Apr 2017 21:08:41 +0200 (CEST) Received: from localhost (dynscan01.mnet-online.de [192.168.6.70]) by mail.m-online.net (Postfix) with ESMTP id 3wGHCF1Gfhz3jgXm; Sun, 30 Apr 2017 21:08:41 +0200 (CEST) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from mail.mnet-online.de ([192.168.8.182]) by localhost (dynscan01.mail.m-online.net [192.168.6.70]) (amavisd-new, port 10024) with ESMTP id Y-7WJZEKbRvq; Sun, 30 Apr 2017 21:08:38 +0200 (CEST) X-Auth-Info: f0wFOy6qfUY3f8WfA9653jNHkHWy4YDeWU/45vbjhI8= Received: from crub.agik.hopto.org (p4FCB773B.dip0.t-ipconnect.de [79.203.119.59]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by mail.mnet-online.de (Postfix) with ESMTPSA; Sun, 30 Apr 2017 21:08:38 +0200 (CEST) From: Anatolij Gustschin To: linux-fpga@vger.kernel.org Cc: Alan Tull , Moritz Fischer , matthew.gerlach@linux.intel.com, yi1.li@linux.intel.com, linux-kernel@vger.kernel.org Subject: [PATCH v4] fpga manager: Add Altera CvP driver Date: Sun, 30 Apr 2017 21:08:37 +0200 Message-Id: <1493579317-28608-1-git-send-email-agust@denx.de> X-Mailer: git-send-email 2.7.4 Sender: linux-fpga-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-fpga@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin Signed-off-by: Alan Tull --- Changes in v4: - Update description about supported FPGA models in Kconfig and commit log - use writel() for iomem accesses - factor out dummy write code to altera_cvp_dummy_write() - add data register accessor function (iomem and pci config space variants) to reduce code Changes in v3: - removed V-series from description (since the driver works also with Arria-10). Also renamed functions, config option and driver file name. Changed module description in Kconfig - dropped 'firmware=' module option (does not allow to bypass the fpga framework any more) - fixed build warning with newer gcc - changed to use hex numbers for PCI bus/device in registered fpga manager name. Use more generic fpga manager name (no V-series in the name any more) - moved steps 16 to 18 from teardown func to write_complete() as suggested by Yi - rebased on linux-next and tested with Arria-10/Stratix-V devices Changes in v2: - rebase for v4.10, change subject ("Stratix V" to "V series") and add GPL header - use BIT() in register bit macro definitions - change .state() to return status or FPGA_MGR_STATE_UNKNOWN - use unique name for registered FPGA manager (append "@B:D.F") - use PCI_ANY_ID for device ID, users can set custom ID using new_id sysfs interface - remove map_base/map_len init and use pci_iomap() instead - simplify to use pci_read_config_word() instead of pci_bus_read_config_word() - run fpga_mgr_put() after usage, so the module can be removed without unbinding the driver - access CVP_STATUS as a 32-bit register, update CVP_STATUS bits macros - check CONFIG_READY bit in write_init and perform a teardown if this bit is set. Move teardown code to separate function as suggested - change function names to altera_v_*() as we can use the driver with other V-series FPGAs. Also change the driver file and Kconfig option names accordingly - pad written firmware data if the file size is not a multiple of 4 - when config error checking is enabled, run checks after a 4KiB chunk is written - remove single built-in firmware string, add module parameter to allow setting default firmware for multiple cards as a Bus:Device.Function specific strings (optional) - remove polling of non-existing data bits DATA_ENC, DATA_COMP. Instead, add module parameter for bitstream specific clock to data ratio setting drivers/fpga/Kconfig | 7 + drivers/fpga/Makefile | 1 + drivers/fpga/altera-cvp.c | 549 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 557 insertions(+) create mode 100644 drivers/fpga/altera-cvp.c diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 161ba9d..895529e 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -26,6 +26,13 @@ config FPGA_MGR_ICE40_SPI help FPGA manager driver support for Lattice iCE40 FPGAs over SPI. +config FPGA_MGR_ALTERA_CVP + tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager" + depends on PCI + help + FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V + and Arria 10 Altera FPGAs using the CvP interface over PCIe. + config FPGA_MGR_SOCFPGA tristate "Altera SOCFPGA FPGA Manager" depends on ARCH_SOCFPGA || COMPILE_TEST diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 2a4f021..2e5c8b6 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Manager Drivers +obj-$(CONFIG_FPGA_MGR_ALTERA_CVP) += altera-cvp.o obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c new file mode 100644 index 0000000..4903231 --- /dev/null +++ b/drivers/fpga/altera-cvp.c @@ -0,0 +1,549 @@ +/* + * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP + * + * Copyright (C) 2017 DENX Software Engineering + * + * Anatolij Gustschin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Manage Altera FPGA firmware using PCIe CvP. + * Firmware must be in binary "rbf" format. + */ + +#include +#include +#include +#include +#include + +#define CVP_BAR 0 /* BAR used for data transfer in memory mode */ +#define CVP_DUMMY_WR 244 /* dummy writes to clear CvP state machine */ +#define TIMEOUT_IN_US 2000 + +/* Vendor Specific Extended Capability Offset */ +#define VSEC_OFFSET 0x200 +#define VSEC_PCIE_EXT_CAP_ID_VAL 0x000b + +/* offsets from VSEC_OFFSET */ +#define VSEC_PCIE_EXT_CAP_ID (VSEC_OFFSET + 0x00) /* 16bit */ +#define VSEC_VERSION 0x02 /* 8bit */ +#define VSEC_NEXT_CAP_OFF 0x03 /* 8bit */ +#define VSEC_ID 0x04 /* 16bit */ +#define VSEC_REV 0x06 /* 8bit */ +#define VSEC_LENGTH 0x07 /* 8bit */ +#define VSEC_ALTERA_MARKER 0x08 /* 32bit */ + +#define VSEC_CVP_STATUS (VSEC_OFFSET + 0x1c) /* 32bit */ +#define VSEC_CVP_STATUS_DATA_ENC BIT(16) /* is treated as encrypted */ +#define VSEC_CVP_STATUS_DATA_COMP BIT(17) /* is treated as compressed */ +#define VSEC_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */ +#define VSEC_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */ +#define VSEC_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */ +#define VSEC_CVP_STATUS_USERMODE BIT(21) /* USERMODE */ +#define VSEC_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */ +#define VSEC_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */ + +#define VSEC_CVP_MODE_CTRL (VSEC_OFFSET + 0x20) /* 32bit */ +#define VSEC_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */ +#define VSEC_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */ +#define VSEC_CVP_MODE_CTRL_FULL_CFG BIT(2) /* CVP_FULLCONFIG */ +#define VSEC_CVP_MODE_CTRL_NUMCLKS (0xff<<8) /* CVP_NUMCLKS */ + +#define VSEC_CVP_DATA (VSEC_OFFSET + 0x28) /* 32bit */ +#define VSEC_CVP_PROG_CTRL (VSEC_OFFSET + 0x2c) /* 32bit */ +#define VSEC_CVP_PROG_CTRL_CONFIG BIT(0) +#define VSEC_CVP_PROG_CTRL_START_XFER BIT(1) + +#define VSEC_UNCOR_ERR_STATUS (VSEC_OFFSET + 0x34) /* 32bit */ +#define VSEC_UNCOR_ERR_MASK (VSEC_OFFSET + 0x38) /* 32bit */ +#define VSEC_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */ + +#define DRV_NAME "altera-cvp" +#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager" + +static int chkcfg; /* use value 1 for debugging only */ +module_param(chkcfg, int, 0664); +MODULE_PARM_DESC(chkcfg, "1 - check CvP status, 0 - skip checking (default 0)"); + +static int numclks = 1; /* default 1 for uncompressed and unencrypted */ +module_param(numclks, int, 0664); +MODULE_PARM_DESC(numclks, "Clock to data ratio 1, 4 or 8 (default 1)"); + +struct altera_cvp_conf { + struct fpga_manager *mgr; + struct pci_dev *pci_dev; + void __iomem *map; + void (*write_data)(struct altera_cvp_conf *conf, + u32 val); + char mgr_name[64]; +}; + +static inline void altera_cvp_chk_numclks(void) +{ + switch (numclks) { + case 1: + case 4: + case 8: + break; + default: + numclks = 1; + break; + } +} + +static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr) +{ + struct altera_cvp_conf *conf = mgr->priv; + u32 status; + + pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &status); + + if (status & VSEC_CVP_STATUS_CFG_DONE) + return FPGA_MGR_STATE_OPERATING; + + if (status & VSEC_CVP_STATUS_CVP_EN) + return FPGA_MGR_STATE_POWER_UP; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val) +{ + writel(val, conf->map); +} + +static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val) +{ + pci_write_config_dword(conf->pci_dev, VSEC_CVP_DATA, val); +} + +static void altera_cvp_dummy_write(struct altera_cvp_conf *conf) +{ + u32 val32; + int i; + + /* set number of CVP clock cycles for every CVP Data Register Write */ + pci_read_config_dword(conf->pci_dev, VSEC_CVP_MODE_CTRL, &val32); + val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS; + val32 |= 0x01 << 8; /* 1 clock */ + pci_write_config_dword(conf->pci_dev, VSEC_CVP_MODE_CTRL, val32); + + for (i = 0; i < CVP_DUMMY_WR; i++) + conf->write_data(conf, 0xdeadbeef); +} + +static int altera_cvp_teardown(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct altera_cvp_conf *conf = mgr->priv; + struct pci_dev *pdev = conf->pci_dev; + int status = 0; + int delay_us; + u32 val32; + + /* + * STEP 12 - reset START_XFER bit + */ + pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32); + val32 &= ~VSEC_CVP_PROG_CTRL_START_XFER; + pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32); + + /* + * STEP 13 - reset CVP_CONFIG bit + */ + val32 &= ~VSEC_CVP_PROG_CTRL_CONFIG; + pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32); + + /* + * STEP 14 + * - set CVP_NUMCLKS to 0x01 and then issue CVP_DUMMY_WR dummy + * writes to the HIP + */ + altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */ + + /* + * STEP 15 - poll CVP_CONFIG_READY bit + */ + delay_us = 0; + while (1) { + pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32); + if ((val32 & VSEC_CVP_STATUS_CFG_RDY) == 0) + break; + + udelay(1); /* wait 1us */ + + if (delay_us++ > TIMEOUT_IN_US) { + dev_warn(&mgr->dev, "CVP_CONFIG_READY == 0 timeout\n"); + status = -ETIMEDOUT; + break; + } + } + + return status; +} + +static int altera_cvp_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct altera_cvp_conf *conf = mgr->priv; + struct pci_dev *pdev = conf->pci_dev; + int delay_us; + u32 val32; + int ret; + + if (info && info->flags & FPGA_MGR_PARTIAL_RECONFIG) { + dev_err(&mgr->dev, "Partial reconfiguration not supported.\n"); + return -EINVAL; + } + + /* + * STEP 1 - read CVP status and check CVP_EN flag + */ + pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32); + if (!(val32 & VSEC_CVP_STATUS_CVP_EN)) { + dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val32); + return -ENODEV; + } + + if (val32 & VSEC_CVP_STATUS_CFG_RDY) { + dev_warn(&mgr->dev, "CvP already started, teardown first\n"); + ret = altera_cvp_teardown(mgr, info); + if (ret < 0) + return ret; + } + + /* + * STEP 2 + * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned) + */ + /* switch from fabric to PMA clock */ + pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32); + val32 |= VSEC_CVP_MODE_CTRL_HIP_CLK_SEL; + pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32); + + /* set CVP mode */ + pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32); + val32 |= VSEC_CVP_MODE_CTRL_CVP_MODE; + pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32); + + /* + * STEP 3 + * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP + */ + altera_cvp_dummy_write(conf); + + /* + * STEP 4 - set CVP_CONFIG bit + */ + pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32); + /* request control block to begin transfer using CVP */ + val32 |= VSEC_CVP_PROG_CTRL_CONFIG; + pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32); + + /* + * STEP 5 - poll CVP_CONFIG READY + */ + delay_us = 0; + while (1) { + pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32); + if ((val32 & VSEC_CVP_STATUS_CFG_RDY) == + VSEC_CVP_STATUS_CFG_RDY) + break; + + udelay(1); /* wait 1us */ + + if (delay_us++ > TIMEOUT_IN_US) { + dev_warn(&mgr->dev, "CVP_CONFIG_READY == 1 timeout\n"); + return -ETIMEDOUT; + } + } + + /* + * STEP 6 + * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP + */ + altera_cvp_dummy_write(conf); /* from internal clock to CVP clock */ + + /* + * STEP 7 - set START_XFER + */ + pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32); + val32 |= VSEC_CVP_PROG_CTRL_START_XFER; + pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32); + + /* + * STEP 8 - start transfer (set CVP_NUMCLKS) + */ + altera_cvp_chk_numclks(); + pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32); + val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS; + val32 |= numclks << 8; /* bitstream specific clock count */ + pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32); + + return 0; +} + +static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes) +{ + struct altera_cvp_conf *conf = mgr->priv; + u32 val32; + + /* + * STEP 10 (optional) - check CVP_CONFIG_ERROR flag + */ + pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &val32); + if (val32 & VSEC_CVP_STATUS_CFG_ERR) { + dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zi bytes!\n", + bytes); + return -EPROTO; + } + return 0; +} + +static int altera_cvp_write(struct fpga_manager *mgr, const char *buf, + size_t count) +{ + struct altera_cvp_conf *conf = mgr->priv; + const u32 *data; + size_t bytes; + int status = 0; + u32 mask; + + /* + * STEP 9 + * - write 32-bit configuration data from RBF file to CVP data register + */ + data = (u32 *)buf; + bytes = count; + + while (bytes >= 4) { + conf->write_data(conf, *data++); + bytes -= 4; + + /* + * STEP 10 (optional) and STEP 11 + * - check error flag + * - loop until data transfer completed + */ + if (chkcfg && !(bytes % SZ_4K)) { + size_t done = count - bytes; + + status = altera_cvp_chk_error(mgr, done); + if (status < 0) + return status; + } + } + + switch (bytes) { + case 3: + mask = 0x00ffffff; + break; + case 2: + mask = 0x0000ffff; + break; + case 1: + mask = 0x000000ff; + break; + case 0: + mask = 0x00000000; + break; + } + + if (mask) { + conf->write_data(conf, *data & mask); + + if (chkcfg) + status = altera_cvp_chk_error(mgr, count); + } + + return status; +} + +static int altera_cvp_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct altera_cvp_conf *conf = mgr->priv; + struct pci_dev *pdev = conf->pci_dev; + int status; + int delay_us; + u32 status_msk; + u32 val32; + + status = altera_cvp_teardown(mgr, info); + if (status < 0) + return status; + + /* + * STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit + */ + pci_read_config_dword(pdev, VSEC_UNCOR_ERR_STATUS, &val32); + if (val32 & VSEC_UNCOR_ERR_CVP_CFG_ERR) { + dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n"); + return -EFAULT; + } + + /* + * STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit + */ + pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32); + val32 &= ~VSEC_CVP_MODE_CTRL_HIP_CLK_SEL; + val32 &= ~VSEC_CVP_MODE_CTRL_CVP_MODE; + pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32); + + /* + * STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits + */ + delay_us = 0; + status_msk = VSEC_CVP_STATUS_PLD_CLK_IN_USE | VSEC_CVP_STATUS_USERMODE; + while (1) { + pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32); + if ((val32 & status_msk) == status_msk) + break; + + udelay(1); /* wait 1us */ + + if (delay_us++ > TIMEOUT_IN_US) { + dev_warn(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n"); + status = -ETIMEDOUT; + break; + } + } + + return status; +} + +static const struct fpga_manager_ops altera_cvp_ops = { + .state = altera_cvp_state, + .write_init = altera_cvp_write_init, + .write = altera_cvp_write, + .write_complete = altera_cvp_write_complete, +}; + +static int altera_cvp_probe(struct pci_dev *pdev, + const struct pci_device_id *dev_id) +{ + struct altera_cvp_conf *conf; + u16 cmd, val16; + int ret; + + pci_read_config_word(pdev, VSEC_PCIE_EXT_CAP_ID, &val16); + if (val16 != VSEC_PCIE_EXT_CAP_ID_VAL) { + dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val16); + ret = -ENODEV; + goto err; + } + + /* Enable memory BAR access */ + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if (!(cmd & PCI_COMMAND_MEMORY)) { + cmd |= PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_COMMAND, cmd); + } + + conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL); + if (!conf) { + ret = -ENOMEM; + goto err; + } + + conf->pci_dev = pdev; + + if (pci_request_region(pdev, CVP_BAR, "CVP") < 0) { + dev_err(&pdev->dev, "Requesting CVP BAR region failed\n"); + ret = -ENODEV; + goto err; + } + + conf->write_data = altera_cvp_write_data_iomem; + + conf->map = pci_iomap(pdev, CVP_BAR, 0); + if (!conf->map) { + dev_warn(&pdev->dev, "Mapping CVP BAR failed\n"); + conf->write_data = altera_cvp_write_data_config; + } + + snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%02x:%02x.%d", + ALTERA_CVP_MGR_NAME, pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + ret = fpga_mgr_register(&pdev->dev, conf->mgr_name, + &altera_cvp_ops, conf); + if (ret) + goto err_unmap; + + conf->mgr = fpga_mgr_get(&pdev->dev); + if (IS_ERR(conf->mgr)) { + dev_err(&pdev->dev, "Getting fpga mgr reference failed\n"); + ret = -ENODEV; + goto err_unreg; + } + fpga_mgr_put(conf->mgr); + + return 0; + +err_unreg: + fpga_mgr_unregister(&pdev->dev); +err_unmap: + pci_iounmap(pdev, conf->map); + pci_release_region(pdev, CVP_BAR); +err: + cmd &= ~PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_COMMAND, cmd); + return ret; +} + +static void altera_cvp_remove(struct pci_dev *pdev) +{ + struct fpga_manager *mgr = pci_get_drvdata(pdev); + struct altera_cvp_conf *conf = mgr->priv; + u16 cmd; + + fpga_mgr_unregister(&pdev->dev); + pci_iounmap(pdev, conf->map); + pci_release_region(pdev, CVP_BAR); + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + cmd &= ~PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_COMMAND, cmd); +} + +#define PCI_VENDOR_ID_ALTERA 0x1172 + +static struct pci_device_id altera_cvp_id_tbl[] = { + { PCI_VDEVICE(ALTERA, PCI_ANY_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl); + +static struct pci_driver altera_cvp_driver = { + .name = DRV_NAME, + .id_table = altera_cvp_id_tbl, + .probe = altera_cvp_probe, + .remove = altera_cvp_remove, +}; + +static int __init altera_cvp_init(void) +{ + return pci_register_driver(&altera_cvp_driver); +} + +static void __exit altera_cvp_exit(void) +{ + pci_unregister_driver(&altera_cvp_driver); +} + +module_init(altera_cvp_init); +module_exit(altera_cvp_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Anatolij Gustschin "); +MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");