From patchwork Thu Jul 6 10:01:10 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Paolo Pisati X-Patchwork-Id: 9827927 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id D6ACE60361 for ; Thu, 6 Jul 2017 10:01:31 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id C4A01223A5 for ; Thu, 6 Jul 2017 10:01:31 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id B6DEA284FE; Thu, 6 Jul 2017 10:01:31 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.3 required=2.0 tests=BAYES_00, DKIM_ADSP_CUSTOM_MED, DKIM_SIGNED, FREEMAIL_FROM, RCVD_IN_DNSWL_HI, RCVD_IN_SORBS_SPAM, T_DKIM_INVALID autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 11D00223A5 for ; Thu, 6 Jul 2017 10:01:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752042AbdGFKBT (ORCPT ); Thu, 6 Jul 2017 06:01:19 -0400 Received: from mail-wr0-f193.google.com ([209.85.128.193]:36793 "EHLO mail-wr0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750862AbdGFKBQ (ORCPT ); Thu, 6 Jul 2017 06:01:16 -0400 Received: by mail-wr0-f193.google.com with SMTP id 77so3813416wrb.3; Thu, 06 Jul 2017 03:01:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=+LSGsjnkN97auEeNYXD7415Mn5090FxyDZxnqrIczT8=; b=ZAEzbjcVwKmWvZPVGOGPwlX+OUIVCT0i17uW2+/miSkH6x2WIyAQwYYvFBXDqpz844 c0As0kV5x8RWrDnEBOwoqRR+eVBoXhBxpp8M+1diUKxqwFLLN0EIA85Q1vRWbU1o5IZr pBvBllVReNOvRaeEptFsY4vAL5MTyCBEbakIavEdChxkcl3LXl3bI7DTpmkudRlmeP1+ Ik/U2ZMdR4pdrKe9b7bRY1T2VLcgGATRW3ueafAPJBXZfGLVr+xQvH0QRYSe8JRze6HJ /AzlOpqhA5XmBAyTFGj6mpZ90isZnEDpxmB14B2mdTRwut47lDgINoz/1tWEoQScAYIN UTyw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=+LSGsjnkN97auEeNYXD7415Mn5090FxyDZxnqrIczT8=; b=nD91rzdgk7Ds9Cu6HxLkEvxMN3FXLu67JmFGYb5+UnbuhLEJy4Ji7Doarh9BjLiUc2 7er6fTkJHvnGrmkjp5W5N8BymUdO6t09OLGDDF2LN4V8jHfzNUVoWTyBLdJjUVW2MqZH 13pV3kknIg1gyQC15xbC+wf0ehJT0WXzB6gDE+WP24/XpT2NMdsaCS7jp03CVD5CJlcw oKzyA9r+eyFKAk0aHJxfhLFWQZOZz5+bnqRKegkAt5S6w8FiZ02W4DdzpJivqfsWsiS8 ttws5bB9SEG+e+slXW4TU7EExM5aOXfPYxyDExRMRMZI968MgAVrtuQKxhgqGPSi/yVI MWGQ== X-Gm-Message-State: AKS2vOxS0Du27xFdr2pFLh1yNfEakcwrC1EJ0Qw//JCM03YkCc5l6ium fNxIujOnUPF25w== X-Received: by 10.223.179.67 with SMTP id k3mr46424027wrd.198.1499335274766; Thu, 06 Jul 2017 03:01:14 -0700 (PDT) Received: from gmail.com (net-47-53-205-78.cust.vodafonedsl.it. [47.53.205.78]) by smtp.gmail.com with ESMTPSA id c2sm1489517wre.22.2017.07.06.03.01.13 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 06 Jul 2017 03:01:13 -0700 (PDT) From: Paolo Pisati To: Alan Tull , Moritz Fischer Cc: Rob Herring , Mark Rutland , linux-fpga@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] fpga: lattice machxo2: Add Lattice MachXO2 support Date: Thu, 6 Jul 2017 12:01:10 +0200 Message-Id: <1499335270-6512-3-git-send-email-p.pisati@gmail.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1499335270-6512-1-git-send-email-p.pisati@gmail.com> References: <1499335270-6512-1-git-send-email-p.pisati@gmail.com> MIME-Version: 1.0 Sender: linux-fpga-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-fpga@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This patch adds support to the FPGA manager for programming MachXO2 device’s internal flash memory, via slave SPI. Signed-off-by: Paolo Pisati --- drivers/fpga/Kconfig | 7 ++ drivers/fpga/Makefile | 1 + drivers/fpga/machxo2-spi.c | 298 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 306 insertions(+) create mode 100644 drivers/fpga/machxo2-spi.c diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 161ba9d..addda68 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -26,6 +26,13 @@ config FPGA_MGR_ICE40_SPI help FPGA manager driver support for Lattice iCE40 FPGAs over SPI. +config FPGA_MGR_MACHXO2_SPI + tristate "Lattice MachXO2 SPI" + depends on SPI + help + FPGA manager driver support for Lattice MachXO2 configuration + over slave SPI interface. + config FPGA_MGR_SOCFPGA tristate "Altera SOCFPGA FPGA Manager" depends on ARCH_SOCFPGA || COMPILE_TEST diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 2a4f021..cc10e9d 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Manager Drivers obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o +obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/machxo2-spi.c new file mode 100644 index 0000000..69e02a6 --- /dev/null +++ b/drivers/fpga/machxo2-spi.c @@ -0,0 +1,298 @@ +/** + * Lattice MachXO2 Slave SPI Driver + * + * Copyright (C) 2017 Paolo Pisati + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Manage Lattice FPGA firmware that is loaded over SPI using + * the slave serial configuration interface. + */ + +#include +#include +#include +#include +#include +#include + +/* MachXO2 Programming Guide - sysCONFIG Programming Commands */ + +#define ISC_DISABLE 0x00000026 +#define ISC_ENABLE 0x000008c6 +#define ISC_ERASE 0x0000040e +#define ISC_NOOP 0xffffffff +#define ISC_PROGRAMDONE 0x0000005e +#define LSC_CHECKBUSY 0x000000f0 +#define LSC_INITADDRESS 0x00000046 +#define LSC_PROGINCRNV 0x01000070 +#define LSC_REFRESH 0x00000079 + +#define BUSYFLAG BIT(7) + +/* + * Max CCLK in Slave SPI mode according to 'MachXO2 Family Data + * Sheet' sysCONFIG Port Timing Specifications (3-36) + */ +#define MACHXO2_MAX_SPEED 66000000 + +#define MACHXO2_LOW_DELAY 5 /* us */ +#define MACHXO2_HIGH_DELAY 200 /* us */ +#define MACHXO2_REFRESH 4800 /* us */ + +#define MACHXO2_OP_SIZE sizeof(u32) +#define MACHXO2_PAGE_SIZE 16 + +static int wait_until_not_busy(struct spi_device *spi) +{ + struct spi_message msg; + struct spi_transfer rx, tx; + u32 checkbusy = LSC_CHECKBUSY; + u8 busy; + int ret; + + do { + memset(&rx, 0, sizeof(rx)); + memset(&tx, 0, sizeof(tx)); + tx.tx_buf = &checkbusy; + tx.len = MACHXO2_OP_SIZE; + rx.rx_buf = &busy; + rx.len = sizeof(busy); + spi_message_init(&msg); + spi_message_add_tail(&tx, &msg); + spi_message_add_tail(&rx, &msg); + ret = spi_sync(spi, &msg); + if (ret) + return ret; + } while (busy & BUSYFLAG); + + return 0; +} + +static enum fpga_mgr_states machxo2_spi_state(struct fpga_manager *mgr) +{ + return FPGA_MGR_STATE_UNKNOWN; +} + +static int machxo2_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + struct spi_device *spi = mgr->priv; + struct spi_message msg; + struct spi_transfer tx[5]; + u32 disable = ISC_DISABLE; + u32 bypass = ISC_NOOP; + u32 enable = ISC_ENABLE; + u32 erase = ISC_ERASE; + u32 initaddr = LSC_INITADDRESS; + int ret; + + if ((info->flags & FPGA_MGR_PARTIAL_RECONFIG)) { + dev_err(&mgr->dev, + "Partial reconfiguration is not supported\n"); + return -ENOTSUPP; + } + + memset(tx, 0, sizeof(tx)); + spi_message_init(&msg); + tx[0].tx_buf = &disable; + tx[0].len = MACHXO2_OP_SIZE - 1; + spi_message_add_tail(&tx[0], &msg); + + tx[1].tx_buf = &bypass; + tx[1].len = MACHXO2_OP_SIZE; + spi_message_add_tail(&tx[1], &msg); + ret = spi_sync(spi, &msg); + if (ret) + goto fail; + + ret = wait_until_not_busy(spi); + if (ret) + goto fail; + + spi_message_init(&msg); + tx[2].tx_buf = &enable; + tx[2].len = MACHXO2_OP_SIZE; + tx[2].delay_usecs = MACHXO2_LOW_DELAY; + spi_message_add_tail(&tx[2], &msg); + + tx[3].tx_buf = &erase; + tx[3].len = MACHXO2_OP_SIZE; + spi_message_add_tail(&tx[3], &msg); + ret = spi_sync(spi, &msg); + if (ret) + goto fail; + + ret = wait_until_not_busy(spi); + if (ret) + goto fail; + + spi_message_init(&msg); + tx[4].tx_buf = &initaddr; + tx[4].len = MACHXO2_OP_SIZE; + spi_message_add_tail(&tx[4], &msg); + ret = spi_sync(spi, &msg); + if (ret) + goto fail; + + return 0; + +fail: + dev_err(&mgr->dev, "Error during FPGA init.\n"); + return ret; +} + +static int machxo2_write(struct fpga_manager *mgr, const char *buf, + size_t count) +{ + struct spi_device *spi = mgr->priv; + struct spi_message msg; + struct spi_transfer *tx; + u32 progincr = LSC_PROGINCRNV; + u8 *payload, *ptr; + int i, num, ret; + + if (count % MACHXO2_PAGE_SIZE != 0) { + dev_err(&mgr->dev, "Malformed payload.\n"); + ret = -EINVAL; + goto out; + } + + num = count / MACHXO2_PAGE_SIZE; + payload = kzalloc(count + (num * MACHXO2_OP_SIZE), GFP_KERNEL); + if (!payload) { + dev_err(&mgr->dev, "Failed to allocate payload buffer\n"); + ret = -ENOMEM; + goto out; + } + tx = kcalloc(num, sizeof(*tx), GFP_KERNEL); + if (!tx) { + dev_err(&mgr->dev, "Failed to allocate spi_transfer list\n"); + ret = -ENOMEM; + goto fail; + } + memset(tx, 0, num * sizeof(*tx)); + + spi_message_init(&msg); + ptr = payload; + for (i = 0; i < num; i++) { + tx[i].tx_buf = ptr; + tx[i].len = MACHXO2_OP_SIZE + MACHXO2_PAGE_SIZE; + tx[i].delay_usecs = MACHXO2_HIGH_DELAY; + memcpy(ptr, &progincr, MACHXO2_OP_SIZE); + ptr += MACHXO2_OP_SIZE; + memcpy(ptr, buf, MACHXO2_PAGE_SIZE); + buf += MACHXO2_PAGE_SIZE; + ptr += MACHXO2_PAGE_SIZE; + spi_message_add_tail(&tx[i], &msg); + } + + ret = spi_sync(spi, &msg); + if (ret) + dev_err(&mgr->dev, "Error loading the bitstream.\n"); + + kfree(tx); +fail: + kfree(payload); +out: + return ret; +} + +static int machxo2_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + struct spi_device *spi = mgr->priv; + struct spi_message msg; + struct spi_transfer tx[2]; + u32 progdone = ISC_PROGRAMDONE; + u32 refresh = LSC_REFRESH; + int ret; + + memset(tx, 0, sizeof(tx)); + spi_message_init(&msg); + tx[0].tx_buf = &progdone; + tx[0].len = MACHXO2_OP_SIZE; + spi_message_add_tail(&tx[0], &msg); + ret = spi_sync(spi, &msg); + if (ret) + goto fail; + + ret = wait_until_not_busy(spi); + if (ret) + goto fail; + + spi_message_init(&msg); + tx[1].tx_buf = &refresh; + tx[1].len = MACHXO2_OP_SIZE - 1; + tx[1].delay_usecs = MACHXO2_REFRESH; + spi_message_add_tail(&tx[1], &msg); + ret = spi_sync(spi, &msg); + if (ret) + goto fail; + + return 0; + +fail: + dev_err(&mgr->dev, "Refresh failed.\n"); + return ret; +} + +static const struct fpga_manager_ops machxo2_ops = { + .state = machxo2_spi_state, + .write_init = machxo2_write_init, + .write = machxo2_write, + .write_complete = machxo2_write_complete, +}; + +static int machxo2_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + + if (spi->max_speed_hz > MACHXO2_MAX_SPEED) { + dev_err(dev, "Speed is too high\n"); + return -EINVAL; + } + + return fpga_mgr_register(dev, "Lattice MachXO2 SPI FPGA Manager", + &machxo2_ops, spi); +} + +static int machxo2_spi_remove(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + + fpga_mgr_unregister(dev); + + return 0; +} + +static const struct of_device_id of_match[] = { + { .compatible = "lattice,machxo2-slave-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_match); + +static const struct spi_device_id lattice_ids[] = { + { "machxo2-slave-spi", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, lattice_ids); + +static struct spi_driver machxo2_spi_driver = { + .driver = { + .name = "machxo2-slave-spi", + .of_match_table = of_match_ptr(of_match), + }, + .probe = machxo2_spi_probe, + .remove = machxo2_spi_remove, + .id_table = lattice_ids, +}; + +module_spi_driver(machxo2_spi_driver) + +MODULE_AUTHOR("Paolo Pisati "); +MODULE_DESCRIPTION("Load Lattice FPGA firmware over SPI"); +MODULE_LICENSE("GPL v2");