diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 7273e50..f754578 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -216,6 +216,18 @@ config FW_CFG_SYSFS_CMDLINE
 	  WARNING: Using incorrect parameters (base address in particular)
 	  may crash your system.
 
+config INTEL_STRATIX10_SERVICE
+	tristate "Intel Stratix10 Service Layer"
+	depends on HAVE_ARM_SMCCC
+	default n
+	help
+	  Intel Stratix10 service layer runs at privileged exception level,
+	  interfaces with the service providers (FPGA manager is one of them)
+	  and manages secure monitor call to communicate with secure monitor
+	  software at secure monitor exception level.
+
+	  Say Y here if you want Stratix10 service layer support.
+
 config QCOM_SCM
 	bool
 	depends on ARM || ARM64
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3158dff..80feb63 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
 obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DMIID)		+= dmi-id.o
+obj-$(CONFIG_INTEL_STRATIX10_SERVICE) += stratix10-svc.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
new file mode 100644
index 0000000..168f523
--- /dev/null
+++ b/drivers/firmware/stratix10-svc.c
@@ -0,0 +1,1013 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/kfifo.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/types.h>
+
+/**
+ * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO
+ *
+ * SVC_NUM_CHANNEL - number of channel supported by service layer driver
+ *
+ * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
+ * from the secure world for FPGA manager to reuse, or to free the buffer(s)
+ * when all bit-stream data had be send.
+ *
+ * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
+ * service layer will return error to FPGA manager when timeout occurs,
+ * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
+ */
+#define SVC_NUM_DATA_IN_FIFO			32
+#define SVC_NUM_CHANNEL				1
+#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS	200
+#define FPGA_CONFIG_STATUS_TIMEOUT_SEC		30
+
+typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
+			     unsigned long, unsigned long, unsigned long,
+			     unsigned long, unsigned long,
+			     struct arm_smccc_res *);
+struct stratix10_svc_chan;
+
+/**
+ * struct stratix10_svc_sh_memory - service shared memory structure
+ * @sync_complete: state for a completion
+ * @addr: physical address of shared memory block
+ * @size: size of shared memory block
+ * @invoke_fn: function to issue secure monitor or hypervisor call
+ *
+ * This struct is used to save physical address and size of shared memory
+ * block. The shared memory blocked is allocated by secure monitor software
+ * at secure world.
+ *
+ * Service layer driver uses the physical address and size to create a memory
+ * pool, then allocates data buffer from that memory pool for service client.
+ */
+struct stratix10_svc_sh_memory {
+	struct completion sync_complete;
+	unsigned long addr;
+	unsigned long size;
+	svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_data_mem - service memory structure
+ * @vaddr: virtual address
+ * @paddr: physical address
+ * @size: size of memory
+ * @node: link list head node
+ *
+ * This struct is used in a list that keeps track of buffers which have
+ * been allocated or freed from the memory pool. Service layer driver also
+ * uses this struct to transfer physical address to virtual address.
+ */
+struct stratix10_svc_data_mem {
+	void *vaddr;
+	phys_addr_t paddr;
+	size_t size;
+	struct list_head node;
+};
+
+/**
+ * struct stratix10_svc_data - service data structure
+ * @chan: service channel
+ * @paddr: playload physical address
+ * @size: playload size
+ * @command: service command requested by client
+ * @flag: configuration type (full or partial)
+ * @arg: args to be passed via registers and not physically mapped buffers
+ *
+ * This struct is used in service FIFO for inter-process communication.
+ */
+struct stratix10_svc_data {
+	struct stratix10_svc_chan *chan;
+	phys_addr_t paddr;
+	size_t size;
+	u32 command;
+	u32 flag;
+	u64 arg[3];
+};
+
+/**
+ * struct stratix10_svc_controller - service controller
+ * @dev: device
+ * @chans: array of service channels
+ * @num_chans: number of channels in 'chans' array
+ * @num_active_client: number of active service client
+ * @node: list management
+ * @genpool: memory pool pointing to the memory region
+ * @task: pointer to the thread task which handles SMC or HVC call
+ * @svc_fifo: a queue for storing service message data
+ * @complete_status: state for completion
+ * @svc_fifo_lock: protect access to service message data queue
+ * @invoke_fn: function to issue secure monitor call or hypervisor call
+ *
+ * This struct is used to create communication channels for service clients, to
+ * handle secure monitor or hypervisor call.
+ */
+struct stratix10_svc_controller {
+	struct device *dev;
+	struct stratix10_svc_chan *chans;
+	int num_chans;
+	int num_active_client;
+	struct list_head node;
+	struct gen_pool *genpool;
+	struct task_struct *task;
+	struct kfifo svc_fifo;
+	struct completion complete_status;
+	spinlock_t svc_fifo_lock;
+	svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_chan - service communication channel
+ * @ctrl: pointer to service controller which is the provider of this channel
+ * @scl: pointer to service client which owns the channel
+ * @name: service client name associated with the channel
+ * @lock: protect access to the channel
+ *
+ * This struct is used by service client to communicate with service layer, each
+ * service client has its own channel created by service controller.
+ */
+struct stratix10_svc_chan {
+	struct stratix10_svc_controller *ctrl;
+	struct stratix10_svc_client *scl;
+	char *name;
+	spinlock_t lock;
+};
+
+static LIST_HEAD(svc_ctrl);
+static LIST_HEAD(svc_data_mem);
+
+/**
+ * svc_pa_to_va() - translate physical address to virtual address
+ * @addr: to be translated physical address
+ *
+ * Return: valid virtual address or NULL if the provided physical
+ * address doesn't exist.
+ */
+static void *svc_pa_to_va(unsigned long addr)
+{
+	struct stratix10_svc_data_mem *pmem;
+
+	pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
+	list_for_each_entry(pmem, &svc_data_mem, node)
+		if (pmem->paddr == addr)
+			return pmem->vaddr;
+
+	/* physical address is not found */
+	return NULL;
+}
+
+/**
+ * svc_thread_cmd_data_claim() - claim back buffer from the secure world
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Claim back the submitted buffers from the secure world and pass buffer
+ * back to service client (FPGA manager, etc) for reuse.
+ */
+static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl,
+				      struct stratix10_svc_data *p_data,
+				      struct stratix10_svc_cb_data *cb_data)
+{
+	struct arm_smccc_res res;
+	unsigned long timeout;
+
+	reinit_completion(&ctrl->complete_status);
+	timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
+
+	pr_debug("%s: claim back the submitted buffer\n", __func__);
+	do {
+		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
+				0, 0, 0, 0, 0, 0, 0, &res);
+
+		if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+			if (!res.a1) {
+				complete(&ctrl->complete_status);
+				break;
+			}
+			cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_DONE);
+			cb_data->kaddr1 = svc_pa_to_va(res.a1);
+			cb_data->kaddr2 = (res.a2) ?
+					  svc_pa_to_va(res.a2) : NULL;
+			cb_data->kaddr3 = (res.a3) ?
+					  svc_pa_to_va(res.a3) : NULL;
+			p_data->chan->scl->receive_cb(p_data->chan->scl,
+						      cb_data);
+		} else {
+			pr_debug("%s: secure world busy, polling again\n",
+				 __func__);
+		}
+	} while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
+		 res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY ||
+		 wait_for_completion_timeout(&ctrl->complete_status, timeout));
+}
+
+/**
+ * svc_thread_cmd_config_status() - check configuration status
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Check whether the secure firmware at secure world has finished the FPGA
+ * configuration, and then inform FPGA manager the configuration status.
+ */
+static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
+					 struct stratix10_svc_data *p_data,
+					 struct stratix10_svc_cb_data *cb_data)
+{
+	struct arm_smccc_res res;
+	int count_in_sec;
+
+	cb_data->kaddr1 = NULL;
+	cb_data->kaddr2 = NULL;
+	cb_data->kaddr3 = NULL;
+	cb_data->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+
+	pr_debug("%s: polling config status\n", __func__);
+
+	count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
+	while (count_in_sec) {
+		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
+				0, 0, 0, 0, 0, 0, 0, &res);
+		if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
+		    (res.a0 == INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR))
+			break;
+
+		/*
+		 * configuration is still in progress, wait one second then
+		 * poll again
+		 */
+		msleep(1000);
+		count_in_sec--;
+	};
+
+	if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
+		cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+
+	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_thread_recv_status_ok() - handle the successful status
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ * @res: result from SMC or HVC call
+ *
+ * Send back the correspond status to the service client (FPGA manager etc).
+ */
+static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
+				      struct stratix10_svc_cb_data *cb_data,
+				      struct arm_smccc_res res)
+{
+	cb_data->kaddr1 = NULL;
+	cb_data->kaddr2 = NULL;
+	cb_data->kaddr3 = NULL;
+
+	switch (p_data->command) {
+	case COMMAND_RECONFIG:
+		cb_data->status = BIT(SVC_STATUS_RECONFIG_REQUEST_OK);
+		break;
+	case COMMAND_RECONFIG_DATA_SUBMIT:
+		cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+		break;
+	case COMMAND_NOOP:
+		cb_data->status = BIT(SVC_STATUS_RECONFIG_BUFFER_SUBMITTED);
+		cb_data->kaddr1 = svc_pa_to_va(res.a1);
+		break;
+	case COMMAND_RECONFIG_STATUS:
+		cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
+		break;
+	default:
+		pr_warn("it shouldn't happen\n");
+		break;
+	}
+
+	pr_debug("%s: call receive_cb\n", __func__);
+	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_normal_to_secure_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU
+ * node 0, its function stratix10_svc_secure_call_thread is used to handle
+ * SMC or HVC calls between kernel driver and secure monitor software.
+ *
+ * Return: 0 for success or -ENOMEM on error.
+ */
+static int svc_normal_to_secure_thread(void *data)
+{
+	struct stratix10_svc_controller
+			*ctrl = (struct stratix10_svc_controller *)data;
+	struct stratix10_svc_data *pdata;
+	struct stratix10_svc_cb_data *cbdata;
+	struct arm_smccc_res res;
+	unsigned long a0, a1, a2;
+	int ret_fifo = 0;
+
+	pdata =  kmalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
+	if (!cbdata) {
+		kfree(pdata);
+		return -ENOMEM;
+	}
+
+	/* default set, to remove build warning */
+	a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
+	a1 = 0;
+	a2 = 0;
+
+	pr_debug("smc_hvc_shm_thread is running\n");
+
+	while (!kthread_should_stop()) {
+		ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
+						pdata, sizeof(*pdata),
+						&ctrl->svc_fifo_lock);
+
+		if (!ret_fifo)
+			continue;
+
+		pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
+			 (unsigned int)pdata->paddr, pdata->command,
+			 (unsigned int)pdata->size);
+
+		switch (pdata->command) {
+		case COMMAND_RECONFIG_DATA_CLAIM:
+			svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
+			continue;
+		case COMMAND_RECONFIG:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
+			pr_debug("conf_type=%u\n", (unsigned int)pdata->flag);
+			a1 = pdata->flag;
+			a2 = 0;
+			break;
+		case COMMAND_RECONFIG_DATA_SUBMIT:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
+			a1 = (unsigned long)pdata->paddr;
+			a2 = (unsigned long)pdata->size;
+			break;
+		case COMMAND_RECONFIG_STATUS:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
+			a1 = 0;
+			a2 = 0;
+			break;
+		default:
+			pr_warn("it shouldn't happen\n");
+			break;
+		}
+		pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
+			 __func__, (unsigned int)a0, (unsigned int)a1);
+		pr_debug(" a2=0x%016x\n", (unsigned int)a2);
+
+		ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
+
+		pr_debug("%s: after SMC call -- res.a0=0x%016x",
+			 __func__, (unsigned int)res.a0);
+		pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
+			 (unsigned int)res.a1, (unsigned int)res.a2);
+		pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+
+		switch (res.a0) {
+		case INTEL_SIP_SMC_STATUS_OK:
+			svc_thread_recv_status_ok(pdata, cbdata, res);
+			break;
+		case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+			switch (pdata->command) {
+			case COMMAND_RECONFIG_DATA_SUBMIT:
+				svc_thread_cmd_data_claim(ctrl,
+							  pdata, cbdata);
+				break;
+			case COMMAND_RECONFIG_STATUS:
+				svc_thread_cmd_config_status(ctrl,
+							     pdata, cbdata);
+				break;
+			default:
+				pr_warn("it shouldn't happen\n");
+				break;
+			}
+			break;
+		case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED:
+			pr_debug("%s: STATUS_REJECTED\n", __func__);
+			break;
+		case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+			pr_err("%s: STATUS_ERROR\n", __func__);
+			cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
+			cbdata->kaddr1 = NULL;
+			cbdata->kaddr2 = NULL;
+			cbdata->kaddr3 = NULL;
+			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+			break;
+		default:
+			pr_warn("it shouldn't happen\n");
+			break;
+		}
+	};
+
+	kfree(cbdata);
+	kfree(pdata);
+
+	return 0;
+}
+
+/**
+ * svc_normal_to_secure_shm_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU
+ * node 0, its function stratix10_svc_secure_shm_thread is used to query the
+ * physical address of memory block reserved by secure monitor software at
+ * secure world.
+ *
+ * svc_normal_to_secure_shm_thread() calls do_exit() directly since it is a
+ * standlone thread for which no one will call kthread_stop() or return when
+ * 'kthread_should_stop()' is true.
+ */
+static int svc_normal_to_secure_shm_thread(void *data)
+{
+	struct stratix10_svc_sh_memory
+			*sh_mem = (struct stratix10_svc_sh_memory *)data;
+	struct arm_smccc_res res;
+
+	/* SMC or HVC call to get shared memory info from secure world */
+	sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
+			  0, 0, 0, 0, 0, 0, 0, &res);
+	if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+		sh_mem->addr = res.a1;
+		sh_mem->size = res.a2;
+	} else {
+		pr_err("%s: after SMC call -- res.a0=0x%016x",  __func__,
+		       (unsigned int)res.a0);
+		sh_mem->addr = 0;
+		sh_mem->size = 0;
+	}
+
+	complete(&sh_mem->sync_complete);
+	do_exit(0);
+}
+
+/**
+ * svc_get_sh_memory() - get memory block reserved by secure monitor SW
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: zero for successfully getting the physical address of memory block
+ * reserved by secure monitor software, or negative value on error.
+ */
+static int svc_get_sh_memory(struct platform_device *pdev,
+				    struct stratix10_svc_sh_memory *sh_memory)
+{
+	struct device *dev = &pdev->dev;
+	struct task_struct *sh_memory_task;
+	unsigned int cpu = 0;
+
+	init_completion(&sh_memory->sync_complete);
+
+	/* smc or hvc call happens on cpu 0 bound kthread */
+	sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread,
+					       (void *)sh_memory,
+						cpu_to_node(cpu),
+						"svc_smc_hvc_shm_thread");
+	if (IS_ERR(sh_memory_task)) {
+		dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n");
+		return -EINVAL;
+	}
+
+	wake_up_process(sh_memory_task);
+
+	if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
+		dev_err(dev,
+			"timeout to get sh-memory paras from secure world\n");
+		return -ETIMEDOUT;
+	}
+
+	if (!sh_memory->addr || !sh_memory->size) {
+		dev_err(dev,
+			"fails to get shared memory info from secure world\n");
+		return -ENOMEM;
+	}
+
+	dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
+		(unsigned int)sh_memory->addr,
+		(unsigned int)sh_memory->size);
+
+	return 0;
+}
+
+/**
+ * svc_create_memory_pool() - create a memory pool from reserved memory block
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: pool allocated from reserved memory block or ERR_PTR() on error.
+ */
+static struct gen_pool *
+svc_create_memory_pool(struct platform_device *pdev,
+		       struct stratix10_svc_sh_memory *sh_memory)
+{
+	struct device *dev = &pdev->dev;
+	struct gen_pool *genpool;
+	unsigned long vaddr;
+	phys_addr_t paddr;
+	size_t size;
+	phys_addr_t begin;
+	phys_addr_t end;
+	void *va;
+	size_t page_mask = PAGE_SIZE - 1;
+	int min_alloc_order = 3;
+	int ret;
+
+	begin = roundup(sh_memory->addr, PAGE_SIZE);
+	end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
+	paddr = begin;
+	size = end - begin;
+	va = memremap(paddr, size, MEMREMAP_WC);
+	if (!va) {
+		dev_err(dev, "fail to remap shared memory\n");
+		return ERR_PTR(-EINVAL);
+	}
+	vaddr = (unsigned long)va;
+	dev_dbg(dev,
+		"reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
+		va, (unsigned int)paddr, (unsigned int)size);
+	if ((vaddr & page_mask) || (paddr & page_mask) ||
+	    (size & page_mask)) {
+		dev_err(dev, "page is not aligned\n");
+		return ERR_PTR(-EINVAL);
+	}
+	genpool = gen_pool_create(min_alloc_order, -1);
+	if (!genpool) {
+		dev_err(dev, "fail to create genpool\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+	ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
+	if (ret) {
+		dev_err(dev, "fail to add memory chunk to the pool\n");
+		gen_pool_destroy(genpool);
+		return ERR_PTR(ret);
+	}
+
+	return genpool;
+}
+
+/**
+ * svc_smccc_smc() - secure monitor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_smc(unsigned long a0, unsigned long a1,
+			  unsigned long a2, unsigned long a3,
+			  unsigned long a4, unsigned long a5,
+			  unsigned long a6, unsigned long a7,
+			  struct arm_smccc_res *res)
+{
+	arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * svc_smccc_hvc() - hypervisor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
+			  unsigned long a2, unsigned long a3,
+			  unsigned long a4, unsigned long a5,
+			  unsigned long a6, unsigned long a7,
+			  struct arm_smccc_res *res)
+{
+	arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * get_invoke_func() - invoke SMC or HVC call
+ * @dev: pointer to device
+ *
+ * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
+ */
+static svc_invoke_fn *get_invoke_func(struct device *dev)
+{
+	const char *method;
+
+	if (of_property_read_string(dev->of_node, "method", &method)) {
+		dev_warn(dev, "missing \"method\" property\n");
+		return ERR_PTR(-ENXIO);
+	}
+
+	if (!strcmp(method, "smc"))
+		return svc_smccc_smc;
+	if (!strcmp(method, "hvc"))
+		return svc_smccc_hvc;
+
+	dev_warn(dev, "invalid \"method\" property: %s\n", method);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * stratix10_svc_request_channel_byname() - request a service channel
+ * @client: pointer to service client
+ * @name: service client name
+ *
+ * This function is used by service client to request a service channel.
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct stratix10_svc_chan *stratix10_svc_request_channel_byname(
+	struct stratix10_svc_client *client, const char *name)
+{
+	struct device *dev = client->dev;
+	struct stratix10_svc_controller *controller;
+	struct stratix10_svc_chan *chan = NULL;
+	unsigned long flag;
+	int i;
+
+	/* if probe was called after client's, or error on probe */
+	if (list_empty(&svc_ctrl))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	controller = list_first_entry(&svc_ctrl,
+				      struct stratix10_svc_controller, node);
+	for (i = 0; i < SVC_NUM_CHANNEL; i++) {
+		if (!strcmp(controller->chans[i].name, name)) {
+			chan = &controller->chans[i];
+			break;
+		}
+	}
+
+	/* if there was no channel match */
+	if (i == SVC_NUM_CHANNEL) {
+		dev_err(dev, "%s: channel not allocated\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
+		dev_dbg(dev, "%s: svc not free\n", __func__);
+		return ERR_PTR(-EBUSY);
+	}
+
+	spin_lock_irqsave(&chan->lock, flag);
+	chan->scl = client;
+	chan->ctrl->num_active_client++;
+	spin_unlock_irqrestore(&chan->lock, flag);
+
+	return chan;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname);
+
+/**
+ * stratix10_svc_free_channel() - free service channel
+ * @chan: service channel to be freed
+ *
+ * This function is used by service client to free a service channel.
+ */
+void stratix10_svc_free_channel(struct stratix10_svc_chan *chan)
+{
+	unsigned long flag;
+
+	spin_lock_irqsave(&chan->lock, flag);
+	chan->scl = NULL;
+	chan->ctrl->num_active_client--;
+	module_put(chan->ctrl->dev->driver->owner);
+	spin_unlock_irqrestore(&chan->lock, flag);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_channel);
+
+/**
+ * stratix10_svc_send() - send a message data to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of
+ * "struct stratix10_svc_client_msg"
+ *
+ * This function is used by service client to add a message to the service
+ * layer driver's queue for being sent to the secure world.
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
+{
+	struct stratix10_svc_client_msg
+		*p_msg = (struct stratix10_svc_client_msg *)msg;
+	struct stratix10_svc_data_mem *p_mem;
+	struct stratix10_svc_data *p_data;
+	int ret = 0;
+	unsigned int cpu = 0;
+
+	p_data = kzalloc(sizeof(*p_data), GFP_KERNEL);
+	if (!p_data)
+		return -ENOMEM;
+
+	/* first client will create kernel thread */
+	if (!chan->ctrl->task) {
+		chan->ctrl->task =
+			kthread_create_on_node(svc_normal_to_secure_thread,
+					      (void *)chan->ctrl,
+					      cpu_to_node(cpu),
+					      "svc_smc_hvc_thread");
+			if (IS_ERR(chan->ctrl->task)) {
+				dev_err(chan->ctrl->dev,
+					"fails to create svc_smc_hvc_thread\n");
+				kfree(p_data);
+				return -EINVAL;
+			}
+		kthread_bind(chan->ctrl->task, cpu);
+		wake_up_process(chan->ctrl->task);
+	}
+
+	pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
+		 p_msg->payload, p_msg->command,
+		 (unsigned int)p_msg->payload_length);
+
+	if (list_empty(&svc_data_mem)) {
+		if (p_msg->command == COMMAND_RECONFIG) {
+			struct stratix10_svc_command_config_type *ct =
+				(struct stratix10_svc_command_config_type *)
+				p_msg->payload;
+			p_data->flag = ct->flags;
+		}
+	} else {
+		list_for_each_entry(p_mem, &svc_data_mem, node)
+			if (p_mem->vaddr == p_msg->payload) {
+				p_data->paddr = p_mem->paddr;
+				break;
+			}
+	}
+
+	p_data->command = p_msg->command;
+	p_data->arg[0] = p_msg->arg[0];
+	p_data->arg[1] = p_msg->arg[1];
+	p_data->arg[2] = p_msg->arg[2];
+	p_data->size = p_msg->payload_length;
+	p_data->chan = chan;
+	pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
+	       (unsigned int)p_data->paddr, p_data->command,
+	       (unsigned int)p_data->size);
+	ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
+				  sizeof(*p_data),
+				  &chan->ctrl->svc_fifo_lock);
+
+	kfree(p_data);
+
+	if (!ret)
+		return -ENOBUFS;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_send);
+
+/**
+ * stratix10_svc_done() - complete service request transactions
+ * @chan: service channel assigned to the client
+ *
+ * This function should be called when client has finished its request
+ * or there is an error in the request process. It allows the service layer
+ * to stop the running thread to have maximize savings in kernel resources.
+ */
+void stratix10_svc_done(struct stratix10_svc_chan *chan)
+{
+	/* stop thread when thread is running AND only one active client */
+	if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) {
+		pr_debug("svc_smc_hvc_shm_thread is stopped\n");
+		kthread_stop(chan->ctrl->task);
+		chan->ctrl->task = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_done);
+
+/**
+ * stratix10_svc_allocate_memory() - allocate memory
+ * @chan: service channel assigned to the client
+ * @size: memory size requested by a specific service client
+ *
+ * Service layer allocates the requested number of bytes buffer from the
+ * memory pool, service client uses this function to get allocated buffers.
+ *
+ * Return: address of allocated memory on success, or ERR_PTR() on error.
+ */
+void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
+				    size_t size)
+{
+	struct stratix10_svc_data_mem *pmem;
+	unsigned long va;
+	phys_addr_t pa;
+	struct gen_pool *genpool = chan->ctrl->genpool;
+	size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+	pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
+	if (!pmem)
+		return ERR_PTR(-ENOMEM);
+
+	va = gen_pool_alloc(genpool, s);
+	if (!va)
+		return ERR_PTR(-ENOMEM);
+
+	memset((void *)va, 0, s);
+	pa = gen_pool_virt_to_phys(genpool, va);
+
+	pmem->vaddr = (void *)va;
+	pmem->paddr = pa;
+	pmem->size = s;
+	list_add_tail(&pmem->node, &svc_data_mem);
+	pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
+		 pmem->vaddr, (unsigned int)pmem->paddr);
+
+	return (void *)va;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
+
+/**
+ * stratix10_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: memory to be freed
+ *
+ * This function is used by service client to free allocated buffers.
+ */
+void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
+{
+	struct stratix10_svc_data_mem *pmem;
+	size_t size = 0;
+
+	list_for_each_entry(pmem, &svc_data_mem, node)
+		if (pmem->vaddr == kaddr) {
+			size = pmem->size;
+			break;
+		}
+
+	gen_pool_free(chan->ctrl->genpool, (unsigned long)kaddr, size);
+	pmem->vaddr = NULL;
+	list_del(&pmem->node);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
+
+static const struct of_device_id stratix10_svc_drv_match[] = {
+	{.compatible = "intel,stratix10-svc"},
+	{},
+};
+
+static int stratix10_svc_drv_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stratix10_svc_controller *controller;
+	struct stratix10_svc_chan *chans;
+	struct gen_pool *genpool;
+	struct stratix10_svc_sh_memory *sh_memory;
+	svc_invoke_fn *invoke_fn;
+	size_t fifo_size;
+	int ret;
+
+	/* get SMC or HVC function */
+	invoke_fn = get_invoke_func(dev);
+	if (IS_ERR(invoke_fn))
+		return -EINVAL;
+
+	sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
+	if (!sh_memory)
+		return -ENOMEM;
+
+	sh_memory->invoke_fn = invoke_fn;
+	ret = svc_get_sh_memory(pdev, sh_memory);
+	if (ret)
+		return ret;
+
+	genpool = svc_create_memory_pool(pdev, sh_memory);
+	if (!genpool)
+		return -ENOMEM;
+
+	/* allocate service controller and supporting channel */
+	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+
+	chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
+				   sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
+	if (!chans)
+		return -ENOMEM;
+
+	controller->dev = dev;
+	controller->num_chans = SVC_NUM_CHANNEL;
+	controller->num_active_client = 0;
+	controller->chans = chans;
+	controller->genpool = genpool;
+	controller->task = NULL;
+	controller->invoke_fn = invoke_fn;
+	init_completion(&controller->complete_status);
+
+	fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
+	ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev, "fails to allocate FIFO\n");
+		return ret;
+	}
+	spin_lock_init(&controller->svc_fifo_lock);
+
+	chans[0].scl = NULL;
+	chans[0].ctrl = controller;
+	chans[0].name = SVC_CLIENT_FPGA;
+	spin_lock_init(&chans[0].lock);
+
+	list_add_tail(&controller->node, &svc_ctrl);
+	platform_set_drvdata(pdev, controller);
+
+	pr_info("Intel Service Layer Driver Initialized\n");
+
+	return ret;
+}
+
+static int stratix10_svc_drv_remove(struct platform_device *pdev)
+{
+	struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
+
+	kfifo_free(&ctrl->svc_fifo);
+	if (ctrl->task) {
+		kthread_stop(ctrl->task);
+		ctrl->task = NULL;
+	}
+	if (ctrl->genpool)
+		gen_pool_destroy(ctrl->genpool);
+	list_del(&ctrl->node);
+
+	return 0;
+}
+
+static struct platform_driver stratix10_svc_driver = {
+	.probe = stratix10_svc_drv_probe,
+	.remove = stratix10_svc_drv_remove,
+	.driver = {
+		.name = "stratix10-svc",
+		.of_match_table = stratix10_svc_drv_match,
+	},
+};
+
+static int __init stratix10_svc_init(void)
+{
+	struct device_node *fw_np;
+	struct device_node *np;
+	int ret;
+
+	fw_np = of_find_node_by_name(NULL, "firmware");
+	if (!fw_np)
+		return -ENODEV;
+
+	np = of_find_matching_node(fw_np, stratix10_svc_drv_match);
+	if (!np) {
+		of_node_put(fw_np);
+		return -ENODEV;
+	}
+
+	of_node_put(np);
+	ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL);
+	of_node_put(fw_np);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&stratix10_svc_driver);
+}
+
+static void __exit stratix10_svc_exit(void)
+{
+	return platform_driver_unregister(&stratix10_svc_driver);
+}
+
+subsys_initcall(stratix10_svc_init);
+module_exit(stratix10_svc_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
+MODULE_ALIAS("platform:stratix10-svc");
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
new file mode 100644
index 0000000..a109e4c
--- /dev/null
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -0,0 +1,265 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#ifndef __STRATIX10_SMC_H
+#define __STRATIX10_SMC_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bitops.h>
+
+/**
+ * This file defines the Secure Monitor Call (SMC) message protocol used for
+ * service layer driver in normal world (EL1) to communicate with secure
+ * monitor software in Secure Monitor Exception Level 3 (EL3).
+ *
+ * This file is shared with secure firmware (FW) which is out of kernel tree.
+ *
+ * An ARM SMC instruction takes a function identifier and up to 6 64-bit
+ * register values as arguments, and can return up to 4 64-bit register
+ * value. The operation of the secure monitor is determined by the parameter
+ * values passed in through registers.
+ *
+ * EL1 and EL3 communicates pointer as physical address rather than the
+ * virtual address.
+ *
+ * Functions specified by ARM SMC Calling convention:
+ *
+ * FAST call executes atomic operations, returns when the requested operation
+ * has completed.
+ * STD call starts a operation which can be preempted by a non-secure
+ * interrupt. The call can return before the requested operation has
+ * completed.
+ *
+ * a0..a7 is used as register names in the descriptions below, on arm32
+ * that translates to r0..r7 and on arm64 to w0..w7.
+ */
+
+/**
+ * @func_num: function ID
+ */
+#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+/**
+ * Return values in INTEL_SIP_SMC_* call
+ *
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
+ * Secure monitor software doesn't recognize the request.
+ *
+ * INTEL_SIP_SMC_STATUS_OK:
+ * FPGA configuration completed successfully,
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software can accept the next chunk of FPGA configuration data.
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
+ * In case of FPGA configuration write operation, it means secure monitor
+ * software is still processing previous data & can't accept the next chunk
+ * of data. Service driver needs to issue
+ * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
+ * completed block(s).
+ *
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ * There is error during the FPGA configuration process.
+ */
+#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
+#define INTEL_SIP_SMC_STATUS_OK				0x0
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY		0x1
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED       0x2
+#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR		0x4
+#define INTEL_SIP_SMC_REG_ERROR				0x5
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_START
+ *
+ * Sync call used by service driver at EL1 to request the FPGA in EL3 to
+ * be prepare to receive a new configuration.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
+ * a1: flag for full or partial configuration. 0 for full and 1 for partial
+ * configuration.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
+#define INTEL_SIP_SMC_FPGA_CONFIG_START \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ *
+ * Async call used by service driver at EL1 to provide FPGA configuration data
+ * to secure world.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
+ * a1: 64bit physical address of the configuration data memory block
+ * a2: Size of configuration data block.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block if any completed
+ * block, otherwise zero value.
+ * a2: 64bit physical address of 2nd completed memory block if any completed
+ * block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if any completed
+ * block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
+#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
+	INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
+ *
+ * Sync call used by service driver at EL1 to track the completed write
+ * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
+ * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: 64bit physical address of 1st completed memory block.
+ * a2: 64bit physical address of 2nd completed memory block if
+ * any completed block, otherwise zero value.
+ * a3: 64bit physical address of 3rd completed memory block if
+ * any completed block, otherwise zero value.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
+#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
+INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
+ *
+ * Sync call used by service driver at EL1 to inform secure world that all
+ * data are sent, to check whether or not the secure world had completed
+ * the FPGA configuration process.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
+ * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
+#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
+ *
+ * Sync call used by service driver at EL1 to query the physical address of
+ * memory block reserved by secure monitor software.
+ *
+ * Call register usage:
+ * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1: start of physical address of reserved memory block.
+ * a2: size of reserved memory block.
+ * a3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
+#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)
+
+/**
+ * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
+ *
+ * For SMC loop-back mode only, used for internal integration, debugging
+ * or troubleshooting.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
+ * a1-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
+#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
+
+/*
+ * Request INTEL_SIP_SMC_REG_READ
+ *
+ * Read a protected register at EL3
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_READ.
+ * a1: register address.
+ * a2-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1: value in the register
+ * a2-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_READ 7
+#define INTEL_SIP_SMC_REG_READ \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
+
+/*
+ * Request INTEL_SIP_SMC_REG_WRITE
+ *
+ * Write a protected register at EL3
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_WRITE.
+ * a1: register address
+ * a2: value to program into register.
+ * a3-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1-3: not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
+#define INTEL_SIP_SMC_REG_WRITE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
+
+/*
+ * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
+ *
+ * Update one or more bits in a protected register at EL3 using a
+ * read-modify-write operation.
+ *
+ * Call register usage:
+ * a0: INTEL_SIP_SMC_REG_UPDATE.
+ * a1: register address
+ * a2: write Mask.
+ * a3: value to write.
+ * a4-7: not used.
+ *
+ * Return status:
+ * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
+ * a1-3: Not used.
+ */
+#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
+#define INTEL_SIP_SMC_REG_UPDATE \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
+
+#endif
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
new file mode 100644
index 0000000..f2fda7e
--- /dev/null
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#ifndef __STRATIX10_SVC_CLIENT_H
+#define __STRATIX10_SVC_CLIENT_H
+
+/**
+ * Service layer driver supports client names
+ *
+ * fpga: for FPGA configuration
+ */
+#define SVC_CLIENT_FPGA			"fpga"
+
+/**
+ * Status of the sent command, in bit number
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_REQUEST_OK:
+ * Secure firmware accepts the request of FPGA reconfiguration.
+ *
+ * SVC_STATUS_RECONFIG_BUFFER_SUBMITTED:
+ * Service client successfully submits FPGA configuration
+ * data buffer to secure firmware.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_BUFFER_DONE:
+ * Secure firmware completes data process, ready to accept the
+ * next WRITE transaction.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_COMPLETED:
+ * Secure firmware completes FPGA configuration successfully, FPGA should
+ * be in user mode.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_BUSY:
+ * FPGA configuration is still in process.
+ *
+ * SVC_COMMAND_STATUS_RECONFIG_ERROR:
+ * Error encountered during FPGA configuration.
+ */
+#define SVC_STATUS_RECONFIG_REQUEST_OK		0
+#define SVC_STATUS_RECONFIG_BUFFER_SUBMITTED	1
+#define SVC_STATUS_RECONFIG_BUFFER_DONE		2
+#define SVC_STATUS_RECONFIG_COMPLETED		3
+#define SVC_STATUS_RECONFIG_BUSY		4
+#define SVC_STATUS_RECONFIG_ERROR		5
+
+/**
+ * Flag bit for COMMAND_RECONFIG
+ *
+ * COMMAND_RECONFIG_FLAG_PARTIAL:
+ * Set to FPGA configuration type (full or partial), the default
+ * is full reconfig.
+ */
+#define COMMAND_RECONFIG_FLAG_PARTIAL	0
+
+/**
+ * Timeout settings for service clients:
+ * timeout value used in Stratix10 FPGA manager driver.
+ */
+#define SVC_RECONFIG_REQUEST_TIMEOUT_MS         100
+#define SVC_RECONFIG_BUFFER_TIMEOUT_MS          240
+
+struct stratix10_svc_chan;
+
+/**
+ * enum stratix10_svc_command_code - supported service commands
+ *
+ * @COMMAND_NOOP: do 'dummy' request for integration/debug/trouble-shooting
+ *
+ * @COMMAND_RECONFIG: ask for FPGA configuration preparation, return status
+ * is SVC_STATUS_RECONFIG_REQUEST_OK
+ *
+ * @COMMAND_RECONFIG_DATA_SUBMIT: submit buffer(s) of bit-stream data for the
+ * FPGA configuration, return status is SVC_STATUS_RECONFIG_BUFFER_SUBMITTED,
+ * or SVC_STATUS_RECONFIG_ERROR
+ *
+ * @COMMAND_RECONFIG_DATA_CLAIM: check the status of the configuration, return
+ * status is SVC_STATUS_RECONFIG_COMPLETED, or SVC_STATUS_RECONFIG_BUSY, or
+ * SVC_STATUS_RECONFIG_ERROR
+ *
+ * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return
+ * status is SVC_STATUS_RECONFIG_COMPLETED, or  SVC_STATUS_RECONFIG_BUSY, or
+ * SVC_STATUS_RECONFIG_ERROR
+ */
+enum stratix10_svc_command_code {
+	COMMAND_NOOP = 0,
+	COMMAND_RECONFIG,
+	COMMAND_RECONFIG_DATA_SUBMIT,
+	COMMAND_RECONFIG_DATA_CLAIM,
+	COMMAND_RECONFIG_STATUS
+};
+
+/**
+ * struct stratix10_svc_client_msg - message sent by client to service
+ * @payload: starting address of data need be processed
+ * @payload_length: data size in bytes
+ * @command: service command
+ * @arg: args to be passed via registers and not physically mapped buffers
+ */
+struct stratix10_svc_client_msg {
+	void *payload;
+	size_t payload_length;
+	enum stratix10_svc_command_code command;
+	u64 arg[3];
+};
+
+/**
+ * struct stratix10_svc_command_config_type - config type
+ * @flags: flag bit for the type of FPGA configuration
+ */
+struct stratix10_svc_command_config_type {
+	u32 flags;
+};
+
+/**
+ * struct stratix10_svc_cb_data - callback data structure from service layer
+ * @status: the status of sent command
+ * @kaddr1: address of 1st completed data block
+ * @kaddr2: address of 2nd completed data block
+ * @kaddr3: address of 3rd completed data block
+ */
+struct stratix10_svc_cb_data {
+	u32 status;
+	void *kaddr1;
+	void *kaddr2;
+	void *kaddr3;
+};
+
+/**
+ * struct stratix10_svc_client - service client structure
+ * @dev: the client device
+ * @receive_cb: callback to provide service client the received data
+ * @priv: client private data
+ */
+struct stratix10_svc_client {
+	struct device *dev;
+	void (*receive_cb)(struct stratix10_svc_client *client,
+			   struct stratix10_svc_cb_data *cb_data);
+	void *priv;
+};
+
+/**
+ * stratix10_svc_request_channel_byname() - request service channel
+ * @client: identity of the client requesting the channel
+ * @name: supporting client name defined above
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct stratix10_svc_chan
+*stratix10_svc_request_channel_byname(struct stratix10_svc_client *client,
+	const char *name);
+
+/**
+ * stratix10_svc_free_channel() - free service channel.
+ * @chan: service channel to be freed
+ */
+void stratix10_svc_free_channel(struct stratix10_svc_chan *chan);
+
+/**
+ * stratix10_svc_allocate_memory() - allocate the momory
+ * @chan: service channel assigned to the client
+ * @size: number of bytes client requests
+ *
+ * Service layer allocates the requested number of bytes from the memory
+ * pool for the client.
+ *
+ * Return: the starting address of allocated memory on success, or
+ * ERR_PTR() on error.
+ */
+void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
+				    size_t size);
+
+/**
+ * stratix10_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: starting address of memory to be free back to pool
+ */
+void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr);
+
+/**
+ * stratix10_svc_send() - send a message to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of
+ * struct stratix10_svc_client_msg
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg);
+
+/**
+ * intel_svc_done() - complete service request
+ * @chan: service channel assigned to the client
+ *
+ * This function is used by service client to inform service layer that
+ * client's service requests are completed, or there is an error in the
+ * request process.
+ */
+void stratix10_svc_done(struct stratix10_svc_chan *chan);
+#endif
+
