| Message ID | 20180905072448.12488-3-nava.manne@xilinx.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Bitstream configuration support for ZynqMP | expand |
On Wed, Sep 05, 2018 at 12:54:47PM +0530, Nava kishore Manne wrote: > Add documentation to describe Xilinx ZynqMP fpga driver > bindings. > > Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> > --- > Changes for v2: > -Moved pcap node as a child to firwmare > node as suggested by Rob. Sorry, but I wasn't thinking that you already have a node defined under /firmware. There's no reason to have this pcap node as a child of it. The existing node can instantiate multiple providers including this and reset provider. > .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 13 +++++++++++++ > 1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index 1b431d9bbe44..ef0c3978e6e7 100644 --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -16,6 +16,16 @@ Required properties: Permitted values are: - "smc" : SMC #0, following the SMCCC - "hvc" : HVC #0, following the SMCCC +-------------------------------------------------------------------------- +Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled +using ZynqMP SoC firmware interface +-------------------------------------------------------------------------- +For Bitstream configuration on ZynqMp Soc uses processor configuration +port(PCAP) to configure the programmable logic(PL) through PS by using +FW interface. + +Required properties: +- compatible: should contain "xlnx,zynqmp-pcap-fpga" ------- Example @@ -25,5 +35,8 @@ firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; method = "smc"; + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; }; };
Add documentation to describe Xilinx ZynqMP fpga driver bindings. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> --- Changes for v2: -Moved pcap node as a child to firwmare node as suggested by Rob. .../firmware/xilinx/xlnx,zynqmp-firmware.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+)