@@ -181,7 +181,299 @@ static const struct attribute_group *m10bmc_sec_attr_groups[] = {
NULL,
};
-static const struct fpga_image_load_ops m10bmc_ops = { };
+static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
+{
+ u32 auth_result;
+
+ dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
+
+ if (!m10bmc_sys_read(sec->m10bmc, M10BMC_AUTH_RESULT, &auth_result))
+ dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
+}
+
+static u32 rsu_check_idle(struct m10bmc_sec *sec)
+{
+ u32 doorbell;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ if (rsu_prog(doorbell) != RSU_PROG_IDLE &&
+ rsu_prog(doorbell) != RSU_PROG_RSU_DONE) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_BUSY;
+ }
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static inline bool rsu_start_done(u32 doorbell)
+{
+ u32 status, progress;
+
+ if (doorbell & DRBL_RSU_REQUEST)
+ return false;
+
+ status = rsu_stat(doorbell);
+ if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT)
+ return true;
+
+ progress = rsu_prog(doorbell);
+ if (progress != RSU_PROG_IDLE && progress != RSU_PROG_RSU_DONE)
+ return true;
+
+ return false;
+}
+
+static u32 rsu_update_init(struct m10bmc_sec *sec)
+{
+ u32 doorbell, status;
+ int ret;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_RSU_REQUEST | DRBL_HOST_STATUS,
+ DRBL_RSU_REQUEST |
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_IDLE));
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ doorbell,
+ rsu_start_done(doorbell),
+ NIOS_HANDSHAKE_INTERVAL_US,
+ NIOS_HANDSHAKE_TIMEOUT_US);
+
+ if (ret == -ETIMEDOUT) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_TIMEOUT;
+ } else if (ret) {
+ return FPGA_IMAGE_ERR_RW_ERROR;
+ }
+
+ status = rsu_stat(doorbell);
+ if (status == RSU_STAT_WEAROUT) {
+ dev_warn(sec->dev, "Excessive flash update count detected\n");
+ return FPGA_IMAGE_ERR_WEAROUT;
+ } else if (status == RSU_STAT_ERASE_FAIL) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_HW_ERROR;
+ }
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static u32 rsu_prog_ready(struct m10bmc_sec *sec)
+{
+ unsigned long poll_timeout;
+ u32 doorbell, progress;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ poll_timeout = jiffies + msecs_to_jiffies(RSU_PREP_TIMEOUT_MS);
+ while (rsu_prog(doorbell) == RSU_PROG_PREPARE) {
+ msleep(RSU_PREP_INTERVAL_MS);
+ if (time_after(jiffies, poll_timeout))
+ break;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+ }
+
+ progress = rsu_prog(doorbell);
+ if (progress == RSU_PROG_PREPARE) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_TIMEOUT;
+ } else if (progress != RSU_PROG_READY) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_HW_ERROR;
+ }
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static u32 rsu_send_data(struct m10bmc_sec *sec)
+{
+ u32 doorbell;
+ int ret;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_HOST_STATUS,
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_WRITE_DONE));
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ doorbell,
+ rsu_prog(doorbell) != RSU_PROG_READY,
+ NIOS_HANDSHAKE_INTERVAL_US,
+ NIOS_HANDSHAKE_TIMEOUT_US);
+
+ if (ret == -ETIMEDOUT) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_TIMEOUT;
+ } else if (ret) {
+ return FPGA_IMAGE_ERR_RW_ERROR;
+ }
+
+ switch (rsu_stat(doorbell)) {
+ case RSU_STAT_NORMAL:
+ case RSU_STAT_NIOS_OK:
+ case RSU_STAT_USER_OK:
+ case RSU_STAT_FACTORY_OK:
+ break;
+ default:
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_HW_ERROR;
+ }
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell)
+{
+ if (m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, doorbell))
+ return -EIO;
+
+ switch (rsu_stat(*doorbell)) {
+ case RSU_STAT_NORMAL:
+ case RSU_STAT_NIOS_OK:
+ case RSU_STAT_USER_OK:
+ case RSU_STAT_FACTORY_OK:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (rsu_prog(*doorbell)) {
+ case RSU_PROG_IDLE:
+ case RSU_PROG_RSU_DONE:
+ return 0;
+ case RSU_PROG_AUTHENTICATING:
+ case RSU_PROG_COPYING:
+ case RSU_PROG_UPDATE_CANCEL:
+ case RSU_PROG_PROGRAM_KEY_HASH:
+ return -EAGAIN;
+ default:
+ return -EINVAL;
+ }
+}
+
+static u32 m10bmc_sec_prepare(struct fpga_image_load *imgld)
+{
+ struct m10bmc_sec *sec = imgld->priv;
+ u32 ret;
+
+ if (imgld->remaining_size > M10BMC_STAGING_SIZE)
+ return FPGA_IMAGE_ERR_INVALID_SIZE;
+
+ ret = rsu_check_idle(sec);
+ if (ret != FPGA_IMAGE_ERR_NONE)
+ return ret;
+
+ ret = rsu_update_init(sec);
+ if (ret != FPGA_IMAGE_ERR_NONE)
+ return ret;
+
+ return rsu_prog_ready(sec);
+}
+
+static u32 m10bmc_sec_write_blk(struct fpga_image_load *imgld, u32 offset,
+ u32 *blk_size, u32 max_size)
+{
+ struct m10bmc_sec *sec = imgld->priv;
+ unsigned int stride = regmap_get_reg_stride(sec->m10bmc->regmap);
+ u32 doorbell;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret) {
+ return FPGA_IMAGE_ERR_RW_ERROR;
+ } else if (rsu_prog(doorbell) != RSU_PROG_READY) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_HW_ERROR;
+ }
+
+ ret = regmap_bulk_write(sec->m10bmc->regmap,
+ M10BMC_STAGING_BASE + offset,
+ (void *)imgld->data + offset,
+ (*blk_size + stride - 1) / stride);
+
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static u32 m10bmc_sec_poll_complete(struct fpga_image_load *imgld)
+{
+ struct m10bmc_sec *sec = imgld->priv;
+ unsigned long poll_timeout;
+ u32 doorbell, result;
+ int ret;
+
+ result = rsu_send_data(sec);
+ if (result != FPGA_IMAGE_ERR_NONE)
+ return result;
+
+ poll_timeout = jiffies + msecs_to_jiffies(RSU_COMPLETE_TIMEOUT_MS);
+ do {
+ msleep(RSU_COMPLETE_INTERVAL_MS);
+ ret = rsu_check_complete(sec, &doorbell);
+ } while (ret == -EAGAIN && !time_after(jiffies, poll_timeout));
+
+ if (ret == -EAGAIN) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_TIMEOUT;
+ } else if (ret == -EIO) {
+ return FPGA_IMAGE_ERR_RW_ERROR;
+ } else if (ret) {
+ log_error_regs(sec, doorbell);
+ return FPGA_IMAGE_ERR_HW_ERROR;
+ }
+
+ return FPGA_IMAGE_ERR_NONE;
+}
+
+static u32 m10bmc_sec_cancel(struct fpga_image_load *imgld)
+{
+ struct m10bmc_sec *sec = imgld->priv;
+ u32 doorbell;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ if (ret)
+ return FPGA_IMAGE_ERR_RW_ERROR;
+
+ if (rsu_prog(doorbell) != RSU_PROG_READY)
+ return FPGA_IMAGE_ERR_BUSY;
+
+ ret = regmap_update_bits(sec->m10bmc->regmap,
+ M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ DRBL_HOST_STATUS,
+ FIELD_PREP(DRBL_HOST_STATUS,
+ HOST_STATUS_ABORT_RSU));
+
+ return ret ? FPGA_IMAGE_ERR_RW_ERROR : FPGA_IMAGE_ERR_NONE;
+}
+
+static const struct fpga_image_load_ops m10bmc_ops = {
+ .prepare = m10bmc_sec_prepare,
+ .write_blk = m10bmc_sec_write_blk,
+ .poll_complete = m10bmc_sec_poll_complete,
+ .cancel = m10bmc_sec_cancel,
+};
static int m10bmc_sec_probe(struct platform_device *pdev)
{
Invoke an instance of the FPGA Image Load framework and extend the MAX10 BMC Secure Update driver to include the functions that enable secure updates of BMC images, FPGA images, etc. Signed-off-by: Russ Weight <russell.h.weight@intel.com> --- v15: - Adapted to changes in the FPGA Image Load framework: (1) All enum types (progress and errors) are now type u32 (2) m10bmc_sec_write_blk() adds *blk_size and max_size parameters and uses *blk_size as provided by the caller. (3) m10bmc_sec_poll_complete() no long checks the driver_unload flag. v14: - Changed symbol names to reflect the renaming of the Security Manager Class driver to FPGA Image Load. v13: - No change v12: - Updated Date and KernelVersion fields in ABI documentation - Removed size parameter from the write_blk() op. m10bmc_sec_write_blk() no longer has a size parameter, and the block size is determined in this (the lower-level) driver. v11: - No change v10: - No change v9: - No change v8: - Previously patch 5/6, otherwise no change v7: - No change v6: - Changed (size / stride) calculation to ((size + stride - 1) / stride) to ensure that the proper count is passed to regmap_bulk_write(). - Removed unnecessary call to rsu_check_complete() in m10bmc_sec_poll_complete() and changed while loop to do/while loop. v5: - No change v4: - No change v3: - Changed: iops -> sops, imgr -> smgr, IFPGA_ -> FPGA_, ifpga_ to fpga_ - Changed "MAX10 BMC Secure Engine driver" to "MAX10 BMC Secure Update driver" - Removed wrapper functions (m10bmc_raw_*, m10bmc_sys_*). The underlying functions are now called directly. - Changed calling functions of functions that return "enum fpga_sec_err" to check for (ret != FPGA_SEC_ERR_NONE) instead of (ret) v2: - Reworked the rsu_start_done() function to make it more readable - Reworked while-loop condition/content in rsu_prog_ready() - Minor code cleanup per review comments - Added a comment to the m10bmc_sec_poll_complete() function to explain the context (could take 30+ minutes to complete). - Added m10bmc_ prefix to functions in m10bmc_iops structure - Moved MAX10 BMC address and function definitions to a separate patch. --- drivers/fpga/intel-m10-bmc-sec-update.c | 303 +++++++++++++++++++++++- 1 file changed, 302 insertions(+), 1 deletion(-)