| Message ID | 20220815060715.37712-3-tianfei.zhang@intel.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | add Intel FPGA image reload support | expand |
On Mon, 15 Aug 2022, Tianfei Zhang wrote: > From: Russ Weight <russell.h.weight@intel.com> > > Create m10bmc_sec_retimer_load() callback function > to provide a trigger to update a new retimer (Intel > C827 Ethernet transceiver) firmware on Intel PAC > N3000 Card. > > Signed-off-by: Russ Weight <russell.h.weight@intel.com> > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> Hi Tianfei, You forgot to add Acked-by: Lee Jones <lee@kernel.org>. Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Looks good to me. > --- > v3: > uses regmap_update_bits() API instead of m10bmc_sys_update_bits(). > --- > drivers/fpga/intel-m10-bmc-sec-update.c | 148 ++++++++++++++++++++++++ > include/linux/mfd/intel-m10-bmc.h | 31 +++++ > 2 files changed, 179 insertions(+) > > diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c > index 3a082911cf67..bef07e97c107 100644 > --- a/drivers/fpga/intel-m10-bmc-sec-update.c > +++ b/drivers/fpga/intel-m10-bmc-sec-update.c > @@ -300,6 +300,150 @@ static int m10bmc_sec_bmc_image_load_1(struct m10bmc_sec *sec) > return m10bmc_sec_bmc_image_load(sec, 1); > } > > +static int trigger_retimer_eeprom_load(struct m10bmc_sec *sec) > +{ > + struct intel_m10bmc *m10bmc = sec->m10bmc; > + unsigned int val; > + int ret; > + > + ret = regmap_update_bits(m10bmc->regmap, > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > + DRBL_PKVL_EEPROM_LOAD_SEC, > + DRBL_PKVL_EEPROM_LOAD_SEC); > + if (ret) > + return ret; > + > + /* > + * If the current NIOS FW supports this retimer update feature, then > + * it will clear the same PKVL_EEPROM_LOAD bit in 2 seconds. Otherwise > + * the driver needs to clear the PKVL_EEPROM_LOAD bit manually and > + * return an error code. > + */ > + ret = regmap_read_poll_timeout(m10bmc->regmap, > + M10BMC_SYS_BASE + M10BMC_DOORBELL, val, > + (!(val & DRBL_PKVL_EEPROM_LOAD_SEC)), > + M10BMC_PKVL_LOAD_INTERVAL_US, > + M10BMC_PKVL_LOAD_TIMEOUT_US); > + if (ret == -ETIMEDOUT) { > + dev_err(sec->dev, "PKVL_EEPROM_LOAD clear timedout\n"); > + regmap_update_bits(m10bmc->regmap, > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > + DRBL_PKVL_EEPROM_LOAD_SEC, 0); > + ret = -ENODEV; > + } else if (ret) { > + dev_err(sec->dev, "poll EEPROM_LOAD error %d\n", ret); > + } > + > + return ret; > +} > + > +static int poll_retimer_eeprom_load_done(struct m10bmc_sec *sec) > +{ > + struct intel_m10bmc *m10bmc = sec->m10bmc; > + unsigned int doorbell; > + int ret; > + > + /* > + * RSU_STAT_PKVL_REJECT indicates that the current image is > + * already programmed. RSU_PROG_PKVL_PROM_DONE that the firmware > + * update process has finished, but does not necessarily indicate > + * a successful update. > + */ > + ret = regmap_read_poll_timeout(m10bmc->regmap, > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > + doorbell, > + ((rsu_prog(doorbell) == > + RSU_PROG_PKVL_PROM_DONE) || > + (rsu_stat(doorbell) == > + RSU_STAT_PKVL_REJECT)), > + M10BMC_PKVL_PRELOAD_INTERVAL_US, > + M10BMC_PKVL_PRELOAD_TIMEOUT_US); > + if (ret) { > + if (ret == -ETIMEDOUT) > + dev_err(sec->dev, > + "Doorbell check timedout: 0x%08x\n", doorbell); > + else > + dev_err(sec->dev, "poll Doorbell error\n"); > + return ret; > + } > + > + if (rsu_stat(doorbell) == RSU_STAT_PKVL_REJECT) { > + dev_err(sec->dev, "duplicate image rejected\n"); > + return -ECANCELED; > + } > + > + return 0; > +} > + > +static int poll_retimer_preload_done(struct m10bmc_sec *sec) > +{ > + struct intel_m10bmc *m10bmc = sec->m10bmc; > + unsigned int val; > + int ret; > + > + /* > + * Wait for the updated firmware to be loaded by the PKVL device > + * and confirm that the updated firmware is operational > + */ > + ret = regmap_read_poll_timeout(m10bmc->regmap, > + M10BMC_SYS_BASE + M10BMC_PKVL_POLL_CTRL, val, > + ((val & M10BMC_PKVL_PRELOAD) == M10BMC_PKVL_PRELOAD), > + M10BMC_PKVL_PRELOAD_INTERVAL_US, > + M10BMC_PKVL_PRELOAD_TIMEOUT_US); > + if (ret) { > + dev_err(sec->dev, "poll M10BMC_PKVL_PRELOAD error %d\n", ret); > + return ret; > + } > + > + if ((val & M10BMC_PKVL_UPG_STATUS_MASK) != M10BMC_PKVL_UPG_STATUS_GOOD) { > + dev_err(sec->dev, "error detected during upgrade\n"); > + return -EIO; > + } > + > + return 0; > +} > + > +static int retimer_check_idle(struct m10bmc_sec *sec) > +{ > + u32 doorbell; > + int ret; > + > + ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); > + if (ret) > + return -EIO; > + > + if (rsu_prog(doorbell) != RSU_PROG_IDLE && > + rsu_prog(doorbell) != RSU_PROG_RSU_DONE && > + rsu_prog(doorbell) != RSU_PROG_PKVL_PROM_DONE) { > + log_error_regs(sec, doorbell); > + return -EBUSY; > + } > + > + return 0; > +} > + > +static int m10bmc_sec_retimer_eeprom_load(struct m10bmc_sec *sec) > +{ > + int ret; > + > + ret = retimer_check_idle(sec); > + if (ret) > + goto exit; > + > + ret = trigger_retimer_eeprom_load(sec); > + if (ret) > + goto exit; > + > + ret = poll_retimer_eeprom_load_done(sec); > + if (ret) > + goto exit; > + > + ret = poll_retimer_preload_done(sec); > + > +exit: > + return ret; > +} > + > static struct image_load m10bmc_image_load_hndlrs[] = { > { > .name = "bmc_factory", > @@ -309,6 +453,10 @@ static struct image_load m10bmc_image_load_hndlrs[] = { > .name = "bmc_user", > .load_image = m10bmc_sec_bmc_image_load_0, > }, > + { > + .name = "retimer_fw", > + .load_image = m10bmc_sec_retimer_eeprom_load, > + }, > {} > }; > > diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h > index f0044b14136e..c06b9d3d1c5d 100644 > --- a/include/linux/mfd/intel-m10-bmc.h > +++ b/include/linux/mfd/intel-m10-bmc.h > @@ -36,6 +36,37 @@ > #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24) > #define M10BMC_VER_LEGACY_INVALID 0xffffffff > > +/* Retimer related registers, in system register region */ > +#define M10BMC_PKVL_POLL_CTRL 0x80 > +#define M10BMC_PKVL_A_PRELOAD BIT(16) > +#define M10BMC_PKVL_A_PRELOAD_TO BIT(17) > +#define M10BMC_PKVL_A_DATA_TOO_BIG BIT(18) > +#define M10BMC_PKVL_A_HDR_CKSUM BIT(20) > +#define M10BMC_PKVL_B_PRELOAD BIT(24) > +#define M10BMC_PKVL_B_PRELOAD_TO BIT(25) > +#define M10BMC_PKVL_B_DATA_TOO_BIG BIT(26) > +#define M10BMC_PKVL_B_HDR_CKSUM BIT(28) > + > +#define M10BMC_PKVL_PRELOAD (M10BMC_PKVL_A_PRELOAD | M10BMC_PKVL_B_PRELOAD) > +#define M10BMC_PKVL_PRELOAD_TIMEOUT (M10BMC_PKVL_A_PRELOAD_TO | \ > + M10BMC_PKVL_B_PRELOAD_TO) > +#define M10BMC_PKVL_DATA_TOO_BIG (M10BMC_PKVL_A_DATA_TOO_BIG | \ > + M10BMC_PKVL_B_DATA_TOO_BIG) > +#define M10BMC_PKVL_HDR_CHECKSUM (M10BMC_PKVL_A_HDR_CKSUM | \ > + M10BMC_PKVL_B_HDR_CKSUM) > + > +#define M10BMC_PKVL_UPG_STATUS_MASK (M10BMC_PKVL_PRELOAD | M10BMC_PKVL_PRELOAD_TIMEOUT |\ > + M10BMC_PKVL_DATA_TOO_BIG | M10BMC_PKVL_HDR_CHECKSUM) > +#define M10BMC_PKVL_UPG_STATUS_GOOD (M10BMC_PKVL_PRELOAD | M10BMC_PKVL_HDR_CHECKSUM) > + > +/* interval 100ms and timeout 2s */ > +#define M10BMC_PKVL_LOAD_INTERVAL_US (100 * 1000) > +#define M10BMC_PKVL_LOAD_TIMEOUT_US (2 * 1000 * 1000) > + > +/* interval 100ms and timeout 30s */ > +#define M10BMC_PKVL_PRELOAD_INTERVAL_US (100 * 1000) > +#define M10BMC_PKVL_PRELOAD_TIMEOUT_US (30 * 1000 * 1000) > + > /* Secure update doorbell register, in system register region */ > #define M10BMC_DOORBELL 0x400 > > -- > 2.26.2 > >
> -----Original Message----- > From: matthew.gerlach@linux.intel.com <matthew.gerlach@linux.intel.com> > Sent: Wednesday, August 24, 2022 2:27 AM > To: Zhang, Tianfei <tianfei.zhang@intel.com> > Cc: mdf@kernel.org; Xu, Yilun <yilun.xu@intel.com>; linux-fpga@vger.kernel.org; > lee.jones@linaro.org; Weight, Russell H <russell.h.weight@intel.com>; Wu, Hao > <hao.wu@intel.com>; trix@redhat.com > Subject: Re: [PATCH v4 2/2] fpga: m10bmc-sec: add m10bmc_sec_retimer_load > callback > > > > On Mon, 15 Aug 2022, Tianfei Zhang wrote: > > > From: Russ Weight <russell.h.weight@intel.com> > > > > Create m10bmc_sec_retimer_load() callback function to provide a > > trigger to update a new retimer (Intel > > C827 Ethernet transceiver) firmware on Intel PAC > > N3000 Card. > > > > Signed-off-by: Russ Weight <russell.h.weight@intel.com> > > Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com> > > Hi Tianfei, > > You forgot to add Acked-by: Lee Jones <lee@kernel.org>. I think Lee Jones just acked by other patch (in PMCI pachset) not this patchset. https://patchwork.kernel.org/project/linux-fpga/patch/20220617020405.128352-2-tianfei.zhang@intel.com/ In this patchset, Lee Jones suggested that use regmap API directly and don't need a simple wrapper. https://patchwork.kernel.org/project/linux-fpga/patch/20220725092836.647028-2-tianfei.zhang@intel.com/ > > Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Thanks Matthew. > > Looks good to me. > > --- > > v3: > > uses regmap_update_bits() API instead of m10bmc_sys_update_bits(). > > --- > > drivers/fpga/intel-m10-bmc-sec-update.c | 148 ++++++++++++++++++++++++ > > include/linux/mfd/intel-m10-bmc.h | 31 +++++ > > 2 files changed, 179 insertions(+) > > > > diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c > > b/drivers/fpga/intel-m10-bmc-sec-update.c > > index 3a082911cf67..bef07e97c107 100644 > > --- a/drivers/fpga/intel-m10-bmc-sec-update.c > > +++ b/drivers/fpga/intel-m10-bmc-sec-update.c > > @@ -300,6 +300,150 @@ static int m10bmc_sec_bmc_image_load_1(struct > m10bmc_sec *sec) > > return m10bmc_sec_bmc_image_load(sec, 1); } > > > > +static int trigger_retimer_eeprom_load(struct m10bmc_sec *sec) { > > + struct intel_m10bmc *m10bmc = sec->m10bmc; > > + unsigned int val; > > + int ret; > > + > > + ret = regmap_update_bits(m10bmc->regmap, > > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > > + DRBL_PKVL_EEPROM_LOAD_SEC, > > + DRBL_PKVL_EEPROM_LOAD_SEC); > > + if (ret) > > + return ret; > > + > > + /* > > + * If the current NIOS FW supports this retimer update feature, then > > + * it will clear the same PKVL_EEPROM_LOAD bit in 2 seconds. Otherwise > > + * the driver needs to clear the PKVL_EEPROM_LOAD bit manually and > > + * return an error code. > > + */ > > + ret = regmap_read_poll_timeout(m10bmc->regmap, > > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > val, > > + (!(val & DRBL_PKVL_EEPROM_LOAD_SEC)), > > + M10BMC_PKVL_LOAD_INTERVAL_US, > > + M10BMC_PKVL_LOAD_TIMEOUT_US); > > + if (ret == -ETIMEDOUT) { > > + dev_err(sec->dev, "PKVL_EEPROM_LOAD clear timedout\n"); > > + regmap_update_bits(m10bmc->regmap, > > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > > + DRBL_PKVL_EEPROM_LOAD_SEC, 0); > > + ret = -ENODEV; > > + } else if (ret) { > > + dev_err(sec->dev, "poll EEPROM_LOAD error %d\n", ret); > > + } > > + > > + return ret; > > +} > > + > > +static int poll_retimer_eeprom_load_done(struct m10bmc_sec *sec) { > > + struct intel_m10bmc *m10bmc = sec->m10bmc; > > + unsigned int doorbell; > > + int ret; > > + > > + /* > > + * RSU_STAT_PKVL_REJECT indicates that the current image is > > + * already programmed. RSU_PROG_PKVL_PROM_DONE that the firmware > > + * update process has finished, but does not necessarily indicate > > + * a successful update. > > + */ > > + ret = regmap_read_poll_timeout(m10bmc->regmap, > > + M10BMC_SYS_BASE + M10BMC_DOORBELL, > > + doorbell, > > + ((rsu_prog(doorbell) == > > + RSU_PROG_PKVL_PROM_DONE) || > > + (rsu_stat(doorbell) == > > + RSU_STAT_PKVL_REJECT)), > > + M10BMC_PKVL_PRELOAD_INTERVAL_US, > > + M10BMC_PKVL_PRELOAD_TIMEOUT_US); > > + if (ret) { > > + if (ret == -ETIMEDOUT) > > + dev_err(sec->dev, > > + "Doorbell check timedout: 0x%08x\n", doorbell); > > + else > > + dev_err(sec->dev, "poll Doorbell error\n"); > > + return ret; > > + } > > + > > + if (rsu_stat(doorbell) == RSU_STAT_PKVL_REJECT) { > > + dev_err(sec->dev, "duplicate image rejected\n"); > > + return -ECANCELED; > > + } > > + > > + return 0; > > +} > > + > > +static int poll_retimer_preload_done(struct m10bmc_sec *sec) { > > + struct intel_m10bmc *m10bmc = sec->m10bmc; > > + unsigned int val; > > + int ret; > > + > > + /* > > + * Wait for the updated firmware to be loaded by the PKVL device > > + * and confirm that the updated firmware is operational > > + */ > > + ret = regmap_read_poll_timeout(m10bmc->regmap, > > + M10BMC_SYS_BASE + > M10BMC_PKVL_POLL_CTRL, val, > > + ((val & M10BMC_PKVL_PRELOAD) == > M10BMC_PKVL_PRELOAD), > > + M10BMC_PKVL_PRELOAD_INTERVAL_US, > > + M10BMC_PKVL_PRELOAD_TIMEOUT_US); > > + if (ret) { > > + dev_err(sec->dev, "poll M10BMC_PKVL_PRELOAD error %d\n", ret); > > + return ret; > > + } > > + > > + if ((val & M10BMC_PKVL_UPG_STATUS_MASK) != > M10BMC_PKVL_UPG_STATUS_GOOD) { > > + dev_err(sec->dev, "error detected during upgrade\n"); > > + return -EIO; > > + } > > + > > + return 0; > > +} > > + > > +static int retimer_check_idle(struct m10bmc_sec *sec) { > > + u32 doorbell; > > + int ret; > > + > > + ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); > > + if (ret) > > + return -EIO; > > + > > + if (rsu_prog(doorbell) != RSU_PROG_IDLE && > > + rsu_prog(doorbell) != RSU_PROG_RSU_DONE && > > + rsu_prog(doorbell) != RSU_PROG_PKVL_PROM_DONE) { > > + log_error_regs(sec, doorbell); > > + return -EBUSY; > > + } > > + > > + return 0; > > +} > > + > > +static int m10bmc_sec_retimer_eeprom_load(struct m10bmc_sec *sec) { > > + int ret; > > + > > + ret = retimer_check_idle(sec); > > + if (ret) > > + goto exit; > > + > > + ret = trigger_retimer_eeprom_load(sec); > > + if (ret) > > + goto exit; > > + > > + ret = poll_retimer_eeprom_load_done(sec); > > + if (ret) > > + goto exit; > > + > > + ret = poll_retimer_preload_done(sec); > > + > > +exit: > > + return ret; > > +} > > + > > static struct image_load m10bmc_image_load_hndlrs[] = { > > { > > .name = "bmc_factory", > > @@ -309,6 +453,10 @@ static struct image_load m10bmc_image_load_hndlrs[] = > { > > .name = "bmc_user", > > .load_image = m10bmc_sec_bmc_image_load_0, > > }, > > + { > > + .name = "retimer_fw", > > + .load_image = m10bmc_sec_retimer_eeprom_load, > > + }, > > {} > > }; > > > > diff --git a/include/linux/mfd/intel-m10-bmc.h > > b/include/linux/mfd/intel-m10-bmc.h > > index f0044b14136e..c06b9d3d1c5d 100644 > > --- a/include/linux/mfd/intel-m10-bmc.h > > +++ b/include/linux/mfd/intel-m10-bmc.h > > @@ -36,6 +36,37 @@ > > #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24) > > #define M10BMC_VER_LEGACY_INVALID 0xffffffff > > > > +/* Retimer related registers, in system register region */ > > +#define M10BMC_PKVL_POLL_CTRL 0x80 > > +#define M10BMC_PKVL_A_PRELOAD BIT(16) > > +#define M10BMC_PKVL_A_PRELOAD_TO BIT(17) > > +#define M10BMC_PKVL_A_DATA_TOO_BIG BIT(18) > > +#define M10BMC_PKVL_A_HDR_CKSUM BIT(20) > > +#define M10BMC_PKVL_B_PRELOAD BIT(24) > > +#define M10BMC_PKVL_B_PRELOAD_TO BIT(25) > > +#define M10BMC_PKVL_B_DATA_TOO_BIG BIT(26) > > +#define M10BMC_PKVL_B_HDR_CKSUM BIT(28) > > + > > +#define M10BMC_PKVL_PRELOAD (M10BMC_PKVL_A_PRELOAD | > M10BMC_PKVL_B_PRELOAD) > > +#define M10BMC_PKVL_PRELOAD_TIMEOUT (M10BMC_PKVL_A_PRELOAD_TO | > \ > > + M10BMC_PKVL_B_PRELOAD_TO) > > +#define M10BMC_PKVL_DATA_TOO_BIG > (M10BMC_PKVL_A_DATA_TOO_BIG | \ > > + M10BMC_PKVL_B_DATA_TOO_BIG) > > +#define M10BMC_PKVL_HDR_CHECKSUM (M10BMC_PKVL_A_HDR_CKSUM | > \ > > + M10BMC_PKVL_B_HDR_CKSUM) > > + > > +#define M10BMC_PKVL_UPG_STATUS_MASK (M10BMC_PKVL_PRELOAD | > M10BMC_PKVL_PRELOAD_TIMEOUT |\ > > + M10BMC_PKVL_DATA_TOO_BIG | > M10BMC_PKVL_HDR_CHECKSUM) > > +#define M10BMC_PKVL_UPG_STATUS_GOOD (M10BMC_PKVL_PRELOAD | > M10BMC_PKVL_HDR_CHECKSUM) > > + > > +/* interval 100ms and timeout 2s */ > > +#define M10BMC_PKVL_LOAD_INTERVAL_US (100 * 1000) > > +#define M10BMC_PKVL_LOAD_TIMEOUT_US (2 * 1000 * 1000) > > + > > +/* interval 100ms and timeout 30s */ > > +#define M10BMC_PKVL_PRELOAD_INTERVAL_US (100 * 1000) > > +#define M10BMC_PKVL_PRELOAD_TIMEOUT_US (30 * 1000 * 1000) > > + > > /* Secure update doorbell register, in system register region */ > > #define M10BMC_DOORBELL 0x400 > > > > -- > > 2.26.2 > > > >
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c index 3a082911cf67..bef07e97c107 100644 --- a/drivers/fpga/intel-m10-bmc-sec-update.c +++ b/drivers/fpga/intel-m10-bmc-sec-update.c @@ -300,6 +300,150 @@ static int m10bmc_sec_bmc_image_load_1(struct m10bmc_sec *sec) return m10bmc_sec_bmc_image_load(sec, 1); } +static int trigger_retimer_eeprom_load(struct m10bmc_sec *sec) +{ + struct intel_m10bmc *m10bmc = sec->m10bmc; + unsigned int val; + int ret; + + ret = regmap_update_bits(m10bmc->regmap, + M10BMC_SYS_BASE + M10BMC_DOORBELL, + DRBL_PKVL_EEPROM_LOAD_SEC, + DRBL_PKVL_EEPROM_LOAD_SEC); + if (ret) + return ret; + + /* + * If the current NIOS FW supports this retimer update feature, then + * it will clear the same PKVL_EEPROM_LOAD bit in 2 seconds. Otherwise + * the driver needs to clear the PKVL_EEPROM_LOAD bit manually and + * return an error code. + */ + ret = regmap_read_poll_timeout(m10bmc->regmap, + M10BMC_SYS_BASE + M10BMC_DOORBELL, val, + (!(val & DRBL_PKVL_EEPROM_LOAD_SEC)), + M10BMC_PKVL_LOAD_INTERVAL_US, + M10BMC_PKVL_LOAD_TIMEOUT_US); + if (ret == -ETIMEDOUT) { + dev_err(sec->dev, "PKVL_EEPROM_LOAD clear timedout\n"); + regmap_update_bits(m10bmc->regmap, + M10BMC_SYS_BASE + M10BMC_DOORBELL, + DRBL_PKVL_EEPROM_LOAD_SEC, 0); + ret = -ENODEV; + } else if (ret) { + dev_err(sec->dev, "poll EEPROM_LOAD error %d\n", ret); + } + + return ret; +} + +static int poll_retimer_eeprom_load_done(struct m10bmc_sec *sec) +{ + struct intel_m10bmc *m10bmc = sec->m10bmc; + unsigned int doorbell; + int ret; + + /* + * RSU_STAT_PKVL_REJECT indicates that the current image is + * already programmed. RSU_PROG_PKVL_PROM_DONE that the firmware + * update process has finished, but does not necessarily indicate + * a successful update. + */ + ret = regmap_read_poll_timeout(m10bmc->regmap, + M10BMC_SYS_BASE + M10BMC_DOORBELL, + doorbell, + ((rsu_prog(doorbell) == + RSU_PROG_PKVL_PROM_DONE) || + (rsu_stat(doorbell) == + RSU_STAT_PKVL_REJECT)), + M10BMC_PKVL_PRELOAD_INTERVAL_US, + M10BMC_PKVL_PRELOAD_TIMEOUT_US); + if (ret) { + if (ret == -ETIMEDOUT) + dev_err(sec->dev, + "Doorbell check timedout: 0x%08x\n", doorbell); + else + dev_err(sec->dev, "poll Doorbell error\n"); + return ret; + } + + if (rsu_stat(doorbell) == RSU_STAT_PKVL_REJECT) { + dev_err(sec->dev, "duplicate image rejected\n"); + return -ECANCELED; + } + + return 0; +} + +static int poll_retimer_preload_done(struct m10bmc_sec *sec) +{ + struct intel_m10bmc *m10bmc = sec->m10bmc; + unsigned int val; + int ret; + + /* + * Wait for the updated firmware to be loaded by the PKVL device + * and confirm that the updated firmware is operational + */ + ret = regmap_read_poll_timeout(m10bmc->regmap, + M10BMC_SYS_BASE + M10BMC_PKVL_POLL_CTRL, val, + ((val & M10BMC_PKVL_PRELOAD) == M10BMC_PKVL_PRELOAD), + M10BMC_PKVL_PRELOAD_INTERVAL_US, + M10BMC_PKVL_PRELOAD_TIMEOUT_US); + if (ret) { + dev_err(sec->dev, "poll M10BMC_PKVL_PRELOAD error %d\n", ret); + return ret; + } + + if ((val & M10BMC_PKVL_UPG_STATUS_MASK) != M10BMC_PKVL_UPG_STATUS_GOOD) { + dev_err(sec->dev, "error detected during upgrade\n"); + return -EIO; + } + + return 0; +} + +static int retimer_check_idle(struct m10bmc_sec *sec) +{ + u32 doorbell; + int ret; + + ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell); + if (ret) + return -EIO; + + if (rsu_prog(doorbell) != RSU_PROG_IDLE && + rsu_prog(doorbell) != RSU_PROG_RSU_DONE && + rsu_prog(doorbell) != RSU_PROG_PKVL_PROM_DONE) { + log_error_regs(sec, doorbell); + return -EBUSY; + } + + return 0; +} + +static int m10bmc_sec_retimer_eeprom_load(struct m10bmc_sec *sec) +{ + int ret; + + ret = retimer_check_idle(sec); + if (ret) + goto exit; + + ret = trigger_retimer_eeprom_load(sec); + if (ret) + goto exit; + + ret = poll_retimer_eeprom_load_done(sec); + if (ret) + goto exit; + + ret = poll_retimer_preload_done(sec); + +exit: + return ret; +} + static struct image_load m10bmc_image_load_hndlrs[] = { { .name = "bmc_factory", @@ -309,6 +453,10 @@ static struct image_load m10bmc_image_load_hndlrs[] = { .name = "bmc_user", .load_image = m10bmc_sec_bmc_image_load_0, }, + { + .name = "retimer_fw", + .load_image = m10bmc_sec_retimer_eeprom_load, + }, {} }; diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h index f0044b14136e..c06b9d3d1c5d 100644 --- a/include/linux/mfd/intel-m10-bmc.h +++ b/include/linux/mfd/intel-m10-bmc.h @@ -36,6 +36,37 @@ #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24) #define M10BMC_VER_LEGACY_INVALID 0xffffffff +/* Retimer related registers, in system register region */ +#define M10BMC_PKVL_POLL_CTRL 0x80 +#define M10BMC_PKVL_A_PRELOAD BIT(16) +#define M10BMC_PKVL_A_PRELOAD_TO BIT(17) +#define M10BMC_PKVL_A_DATA_TOO_BIG BIT(18) +#define M10BMC_PKVL_A_HDR_CKSUM BIT(20) +#define M10BMC_PKVL_B_PRELOAD BIT(24) +#define M10BMC_PKVL_B_PRELOAD_TO BIT(25) +#define M10BMC_PKVL_B_DATA_TOO_BIG BIT(26) +#define M10BMC_PKVL_B_HDR_CKSUM BIT(28) + +#define M10BMC_PKVL_PRELOAD (M10BMC_PKVL_A_PRELOAD | M10BMC_PKVL_B_PRELOAD) +#define M10BMC_PKVL_PRELOAD_TIMEOUT (M10BMC_PKVL_A_PRELOAD_TO | \ + M10BMC_PKVL_B_PRELOAD_TO) +#define M10BMC_PKVL_DATA_TOO_BIG (M10BMC_PKVL_A_DATA_TOO_BIG | \ + M10BMC_PKVL_B_DATA_TOO_BIG) +#define M10BMC_PKVL_HDR_CHECKSUM (M10BMC_PKVL_A_HDR_CKSUM | \ + M10BMC_PKVL_B_HDR_CKSUM) + +#define M10BMC_PKVL_UPG_STATUS_MASK (M10BMC_PKVL_PRELOAD | M10BMC_PKVL_PRELOAD_TIMEOUT |\ + M10BMC_PKVL_DATA_TOO_BIG | M10BMC_PKVL_HDR_CHECKSUM) +#define M10BMC_PKVL_UPG_STATUS_GOOD (M10BMC_PKVL_PRELOAD | M10BMC_PKVL_HDR_CHECKSUM) + +/* interval 100ms and timeout 2s */ +#define M10BMC_PKVL_LOAD_INTERVAL_US (100 * 1000) +#define M10BMC_PKVL_LOAD_TIMEOUT_US (2 * 1000 * 1000) + +/* interval 100ms and timeout 30s */ +#define M10BMC_PKVL_PRELOAD_INTERVAL_US (100 * 1000) +#define M10BMC_PKVL_PRELOAD_TIMEOUT_US (30 * 1000 * 1000) + /* Secure update doorbell register, in system register region */ #define M10BMC_DOORBELL 0x400