@@ -6,6 +6,7 @@
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/fpga/fpga-mgr.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>
@@ -33,7 +34,7 @@
#define MPF_BITS_PER_COMPONENT_SIZE 22
-#define MPF_STATUS_POLL_RETRIES 10000
+#define MPF_STATUS_POLL_TIMEOUT (2 * USEC_PER_SEC)
#define MPF_STATUS_BUSY BIT(0)
#define MPF_STATUS_READY BIT(1)
#define MPF_STATUS_SPI_VIOLATION BIT(2)
@@ -194,24 +195,25 @@ static int mpf_ops_parse_header(struct fpga_manager *mgr,
return 0;
}
-/* Poll HW status until busy bit is cleared and mask bits are set. */
static int mpf_poll_status(struct mpf_priv *priv, u8 mask)
{
- int status, retries = MPF_STATUS_POLL_RETRIES;
+ int ret, status;
- while (retries--) {
- status = mpf_read_status(priv);
- if (status < 0)
- return status;
-
- if (status & MPF_STATUS_BUSY)
- continue;
-
- if (!mask || (status & mask))
- return status;
- }
+ /*
+ * Busy poll HW status. Polling stops if any of the following
+ * conditions are met:
+ * - timeout is reached
+ * - mpf_read_status() returns an error
+ * - busy bit is cleared AND mask bits are set
+ */
+ ret = read_poll_timeout(mpf_read_status, status,
+ (status < 0) ||
+ ((status & (MPF_STATUS_BUSY | mask)) == mask),
+ 0, MPF_STATUS_POLL_TIMEOUT, false, priv);
+ if (ret < 0)
+ return ret;
- return -EBUSY;
+ return status;
}
static int mpf_spi_write(struct mpf_priv *priv, const void *buf, size_t buf_size)