| Message ID | c429cec34a880c0d5438091f436a5946a4db3fc0.1485211400.git.stillcompiling@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Mon, Jan 23, 2017 at 8:51 PM, Joshua Clayton <stillcompiling@gmail.com> wrote: > Add support for Altera cyclone V FPGA connected to an spi port > to the evi devicetree file > > Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> > --- > arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts > index 24fe093..a0cbb2d 100644 > --- a/arch/arm/boot/dts/imx6q-evi.dts > +++ b/arch/arm/boot/dts/imx6q-evi.dts > @@ -82,6 +82,15 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; > status = "okay"; > + > + fpga_spi: cyclonespi@0 { > + compatible = "altr,fpga-passive-serial"; > + spi-max-frequency = <20000000>; > + reg = <0>; > + pinctrl-0 = <&pinctrl_fpgaspi>; > + nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; > + nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; Your binding doc says that 'confd-gpios ' is a required property, but you did not put it here. Either it is missing here or you should mention that it is optional in the binding doc. -- To unsubscribe from this list: send the line "unsubscribe linux-fpga" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/23/2017 04:00 PM, Fabio Estevam wrote: > On Mon, Jan 23, 2017 at 8:51 PM, Joshua Clayton > <stillcompiling@gmail.com> wrote: >> Add support for Altera cyclone V FPGA connected to an spi port >> to the evi devicetree file >> >> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> >> --- >> arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts >> index 24fe093..a0cbb2d 100644 >> --- a/arch/arm/boot/dts/imx6q-evi.dts >> +++ b/arch/arm/boot/dts/imx6q-evi.dts >> @@ -82,6 +82,15 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; >> status = "okay"; >> + >> + fpga_spi: cyclonespi@0 { >> + compatible = "altr,fpga-passive-serial"; >> + spi-max-frequency = <20000000>; >> + reg = <0>; >> + pinctrl-0 = <&pinctrl_fpgaspi>; >> + nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; >> + nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; > Your binding doc says that 'confd-gpios ' is a required property, but > you did not put it here. > > Either it is missing here or you should mention that it is optional in > the binding doc. You're right, Fabio. The barebox driver from which I stole the binding had a confd and no nstat. I've got an nstat and no confd. One or the other is needed to know whether the bitstream was loaded. I can add support for using the confd, but with no way to test it, I forebear. I guess they should both be optional and a note placed that this driver currently uses only the nstat. Will change the doc to reflect that. -- To unsubscribe from this list: send the line "unsubscribe linux-fpga" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index 24fe093..a0cbb2d 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -82,6 +82,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>; status = "okay"; + + fpga_spi: cyclonespi@0 { + compatible = "altr,fpga-passive-serial"; + spi-max-frequency = <20000000>; + reg = <0>; + pinctrl-0 = <&pinctrl_fpgaspi>; + nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + }; }; &ecspi3 { @@ -313,6 +322,13 @@ >; }; + pinctrl_fpgaspi: fpgaspigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + pinctrl_gpminand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
Add support for Altera cyclone V FPGA connected to an spi port to the evi devicetree file Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> --- arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)