@@ -1650,6 +1650,7 @@ int generic_write_check_limits(struct file *file, loff_t pos, loff_t *count)
return 0;
}
+EXPORT_SYMBOL(generic_write_check_limits);
/* Like generic_write_checks(), but takes size of write instead of iter. */
int generic_write_checks_count(struct kiocb *iocb, loff_t *count)
@@ -1718,3 +1719,4 @@ int generic_file_rw_checks(struct file *file_in, struct file *file_out)
return 0;
}
+EXPORT_SYMBOL(generic_file_rw_checks);
@@ -98,8 +98,7 @@ static int generic_remap_checks(struct file *file_in, loff_t pos_in,
return 0;
}
-static int remap_verify_area(struct file *file, loff_t pos, loff_t len,
- bool write)
+int remap_verify_area(struct file *file, loff_t pos, loff_t len, bool write)
{
if (unlikely(pos < 0 || len < 0))
return -EINVAL;
@@ -109,6 +108,7 @@ static int remap_verify_area(struct file *file, loff_t pos, loff_t len,
return security_file_permission(file, write ? MAY_WRITE : MAY_READ);
}
+EXPORT_SYMBOL(remap_verify_area);
/*
* Ensure that we don't remap a partial EOF block in the middle of something
@@ -93,6 +93,7 @@ xfs-y += xfs_aops.o \
xfs_sysfs.o \
xfs_trans.o \
xfs_xattr.o \
+ xfs_xchgrange.o \
kmem.o
# low-level transaction/log code
@@ -841,6 +841,7 @@ struct xfs_scrub_metadata {
#define XFS_IOC_FSGEOMETRY _IOR ('X', 126, struct xfs_fsop_geom)
#define XFS_IOC_BULKSTAT _IOR ('X', 127, struct xfs_bulkstat_req)
#define XFS_IOC_INUMBERS _IOR ('X', 128, struct xfs_inumbers_req)
+/* XFS_IOC_EXCHANGE_RANGE -------- staging 129 */
/* XFS_IOC_GETFSUUID ---------- deprecated 140 */
@@ -15,4 +15,93 @@
* explaining where it went.
*/
+/*
+ * Exchange part of file1 with part of the file that this ioctl that is being
+ * called against (which we'll call file2). Filesystems must be able to
+ * restart and complete the operation even after the system goes down.
+ */
+struct xfs_exch_range {
+ __s64 file1_fd;
+ __s64 file1_offset; /* file1 offset, bytes */
+ __s64 file2_offset; /* file2 offset, bytes */
+ __u64 length; /* bytes to exchange */
+
+ __u64 flags; /* see XFS_EXCH_RANGE_* below */
+
+ /* file2 metadata for optional freshness checks */
+ __s64 file2_ino; /* inode number */
+ __s64 file2_mtime; /* modification time */
+ __s64 file2_ctime; /* change time */
+ __s32 file2_mtime_nsec; /* mod time, nsec */
+ __s32 file2_ctime_nsec; /* change time, nsec */
+
+ __u64 pad[6]; /* must be zeroes */
+};
+
+/*
+ * Atomic exchange operations are not required. This relaxes the requirement
+ * that the filesystem must be able to complete the operation after a crash.
+ */
+#define XFS_EXCH_RANGE_NONATOMIC (1 << 0)
+
+/*
+ * Check that file2's inode number, mtime, and ctime against the values
+ * provided, and return -EBUSY if there isn't an exact match.
+ */
+#define XFS_EXCH_RANGE_FILE2_FRESH (1 << 1)
+
+/*
+ * Check that the file1's length is equal to file1_offset + length, and that
+ * file2's length is equal to file2_offset + length. Returns -EDOM if there
+ * isn't an exact match.
+ */
+#define XFS_EXCH_RANGE_FULL_FILES (1 << 2)
+
+/*
+ * Exchange file data all the way to the ends of both files, and then exchange
+ * the file sizes. This flag can be used to replace a file's contents with a
+ * different amount of data. length will be ignored.
+ */
+#define XFS_EXCH_RANGE_TO_EOF (1 << 3)
+
+/* Flush all changes in file data and file metadata to disk before returning. */
+#define XFS_EXCH_RANGE_FSYNC (1 << 4)
+
+/* Dry run; do all the parameter verification but do not change anything. */
+#define XFS_EXCH_RANGE_DRY_RUN (1 << 5)
+
+/*
+ * Exchange only the parts of the two files where the file allocation units
+ * mapped to file1's range have been written to. This can accelerate
+ * scatter-gather atomic writes with a temp file if all writes are aligned to
+ * the file allocation unit.
+ */
+#define XFS_EXCH_RANGE_FILE1_WRITTEN (1 << 6)
+
+/*
+ * Commit the contents of file1 into file2 if file2 has the same inode number,
+ * mtime, and ctime as the arguments provided to the call. The old contents of
+ * file2 will be moved to file1.
+ *
+ * With this flag, all committed information can be retrieved even if the
+ * system crashes or is rebooted. This includes writing through or flushing a
+ * disk cache if present. The call blocks until the device reports that the
+ * commit is complete.
+ *
+ * This flag should not be combined with NONATOMIC. It can be combined with
+ * FILE1_WRITTEN.
+ */
+#define XFS_EXCH_RANGE_COMMIT (XFS_EXCH_RANGE_FILE2_FRESH | \
+ XFS_EXCH_RANGE_FSYNC)
+
+#define XFS_EXCH_RANGE_ALL_FLAGS (XFS_EXCH_RANGE_NONATOMIC | \
+ XFS_EXCH_RANGE_FILE2_FRESH | \
+ XFS_EXCH_RANGE_FULL_FILES | \
+ XFS_EXCH_RANGE_TO_EOF | \
+ XFS_EXCH_RANGE_FSYNC | \
+ XFS_EXCH_RANGE_DRY_RUN | \
+ XFS_EXCH_RANGE_FILE1_WRITTEN)
+
+#define XFS_IOC_EXCHANGE_RANGE _IOWR('X', 129, struct xfs_exch_range)
+
#endif /* __XFS_FS_STAGING_H__ */
@@ -38,6 +38,7 @@
#include "xfs_reflink.h"
#include "xfs_ioctl.h"
#include "xfs_xattr.h"
+#include "xfs_xchgrange.h"
#include <linux/mount.h>
#include <linux/namei.h>
@@ -1862,6 +1863,32 @@ xfs_fs_eofblocks_from_user(
return 0;
}
+static long
+xfs_ioc_exchange_range(
+ struct file *file2,
+ struct xfs_exch_range __user *argp)
+{
+ struct xfs_exch_range args;
+ struct fd file1;
+ int error;
+
+ if (copy_from_user(&args, argp, sizeof(args)))
+ return -EFAULT;
+
+ file1 = fdget(args.file1_fd);
+ if (!file1.file)
+ return -EBADF;
+
+ error = -EXDEV;
+ if (file1.file->f_path.mnt != file2->f_path.mnt)
+ goto fdput;
+
+ error = xfs_exch_range(file1.file, file2, &args);
+fdput:
+ fdput(file1);
+ return error;
+}
+
/*
* These long-unused ioctls were removed from the official ioctl API in 5.17,
* but retain these definitions so that we can log warnings about them.
@@ -2150,6 +2177,9 @@ xfs_file_ioctl(
return error;
}
+ case XFS_IOC_EXCHANGE_RANGE:
+ return xfs_ioc_exchange_range(filp, arg);
+
default:
return -ENOTTY;
}
new file mode 100644
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020-2023 Oracle. All Rights Reserved.
+ * Author: Darrick J. Wong <djwong@kernel.org>
+ */
+#include "xfs.h"
+#include "xfs_shared.h"
+#include "xfs_format.h"
+#include "xfs_log_format.h"
+#include "xfs_trans_resv.h"
+#include "xfs_mount.h"
+#include "xfs_defer.h"
+#include "xfs_inode.h"
+#include "xfs_trans.h"
+#include "xfs_xchgrange.h"
+#include <linux/fsnotify.h>
+
+/*
+ * Generic code for exchanging ranges of two files via XFS_IOC_EXCHANGE_RANGE.
+ * This part does not deal with XFS-specific data structures, and may some day
+ * be ported to the VFS.
+ *
+ * The goal is to exchange fxr.length bytes starting at fxr.file1_offset in
+ * file1 with the same number of bytes starting at fxr.file2_offset in file2.
+ * Implementations must call xfs_exch_range_prep to prepare the two files
+ * prior to taking locks; they must call xfs_exch_range_check_fresh once
+ * the inode is locked to abort the call if file2 has changed; and they must
+ * update the inode change and mod times of both files as part of the metadata
+ * update. The timestamp updates must be done atomically as part of the data
+ * exchange operation to ensure correctness of the freshness check.
+ */
+
+/*
+ * Check that both files' metadata agree with the snapshot that we took for
+ * the range exchange request.
+ *
+ * This should be called after the filesystem has locked /all/ inode metadata
+ * against modification.
+ */
+STATIC int
+xfs_exch_range_check_fresh(
+ struct inode *inode2,
+ const struct xfs_exch_range *fxr)
+{
+ /* Check that file2 hasn't otherwise been modified. */
+ if ((fxr->flags & XFS_EXCH_RANGE_FILE2_FRESH) &&
+ (fxr->file2_ino != inode2->i_ino ||
+ fxr->file2_ctime != inode2->i_ctime.tv_sec ||
+ fxr->file2_ctime_nsec != inode2->i_ctime.tv_nsec ||
+ fxr->file2_mtime != inode2->i_mtime.tv_sec ||
+ fxr->file2_mtime_nsec != inode2->i_mtime.tv_nsec))
+ return -EBUSY;
+
+ return 0;
+}
+
+/* Performs necessary checks before doing a range exchange. */
+STATIC int
+xfs_exch_range_checks(
+ struct file *file1,
+ struct file *file2,
+ struct xfs_exch_range *fxr,
+ unsigned int blocksize)
+{
+ struct inode *inode1 = file1->f_mapping->host;
+ struct inode *inode2 = file2->f_mapping->host;
+ uint64_t blkmask = blocksize - 1;
+ int64_t test_len;
+ uint64_t blen;
+ loff_t size1, size2;
+ int error;
+
+ /* Don't touch certain kinds of inodes */
+ if (IS_IMMUTABLE(inode1) || IS_IMMUTABLE(inode2))
+ return -EPERM;
+ if (IS_SWAPFILE(inode1) || IS_SWAPFILE(inode2))
+ return -ETXTBSY;
+
+ size1 = i_size_read(inode1);
+ size2 = i_size_read(inode2);
+
+ /* Ranges cannot start after EOF. */
+ if (fxr->file1_offset > size1 || fxr->file2_offset > size2)
+ return -EINVAL;
+
+ /*
+ * If the caller asked for full files, check that the offset/length
+ * values cover all of both files.
+ */
+ if ((fxr->flags & XFS_EXCH_RANGE_FULL_FILES) &&
+ (fxr->file1_offset != 0 || fxr->file2_offset != 0 ||
+ fxr->length != size1 || fxr->length != size2))
+ return -EDOM;
+
+ /*
+ * If the caller said to exchange to EOF, we set the length of the
+ * request large enough to cover everything to the end of both files.
+ */
+ if (fxr->flags & XFS_EXCH_RANGE_TO_EOF)
+ fxr->length = max_t(int64_t, size1 - fxr->file1_offset,
+ size2 - fxr->file2_offset);
+
+ /* The start of both ranges must be aligned to an fs block. */
+ if (!IS_ALIGNED(fxr->file1_offset, blocksize) ||
+ !IS_ALIGNED(fxr->file2_offset, blocksize))
+ return -EINVAL;
+
+ /* Ensure offsets don't wrap. */
+ if (fxr->file1_offset + fxr->length < fxr->file1_offset ||
+ fxr->file2_offset + fxr->length < fxr->file2_offset)
+ return -EINVAL;
+
+ /*
+ * We require both ranges to be within EOF, unless we're exchanging
+ * to EOF. xfs_xchg_range_prep already checked that both
+ * fxr->file1_offset and fxr->file2_offset are within EOF.
+ */
+ if (!(fxr->flags & XFS_EXCH_RANGE_TO_EOF) &&
+ (fxr->file1_offset + fxr->length > size1 ||
+ fxr->file2_offset + fxr->length > size2))
+ return -EINVAL;
+
+ /*
+ * Make sure we don't hit any file size limits. If we hit any size
+ * limits such that test_length was adjusted, we abort the whole
+ * operation.
+ */
+ test_len = fxr->length;
+ error = generic_write_check_limits(file2, fxr->file2_offset, &test_len);
+ if (error)
+ return error;
+ error = generic_write_check_limits(file1, fxr->file1_offset, &test_len);
+ if (error)
+ return error;
+ if (test_len != fxr->length)
+ return -EINVAL;
+
+ /*
+ * If the user wanted us to exchange up to the infile's EOF, round up
+ * to the next block boundary for this check. Do the same for the
+ * outfile.
+ *
+ * Otherwise, reject the range length if it's not block aligned. We
+ * already confirmed the starting offsets' block alignment.
+ */
+ if (fxr->file1_offset + fxr->length == size1)
+ blen = ALIGN(size1, blocksize) - fxr->file1_offset;
+ else if (fxr->file2_offset + fxr->length == size2)
+ blen = ALIGN(size2, blocksize) - fxr->file2_offset;
+ else if (!IS_ALIGNED(fxr->length, blocksize))
+ return -EINVAL;
+ else
+ blen = fxr->length;
+
+ /* Don't allow overlapped exchanges within the same file. */
+ if (inode1 == inode2 &&
+ fxr->file2_offset + blen > fxr->file1_offset &&
+ fxr->file1_offset + blen > fxr->file2_offset)
+ return -EINVAL;
+
+ /* If we already failed the freshness check, we're done. */
+ error = xfs_exch_range_check_fresh(inode2, fxr);
+ if (error)
+ return error;
+
+ /*
+ * Ensure that we don't exchange a partial EOF block into the middle of
+ * another file.
+ */
+ if ((fxr->length & blkmask) == 0)
+ return 0;
+
+ blen = fxr->length;
+ if (fxr->file2_offset + blen < size2)
+ blen &= ~blkmask;
+
+ if (fxr->file1_offset + blen < size1)
+ blen &= ~blkmask;
+
+ return blen == fxr->length ? 0 : -EINVAL;
+}
+
+/*
+ * Check that the two inodes are eligible for range exchanges, the ranges make
+ * sense, and then flush all dirty data. Caller must ensure that the inodes
+ * have been locked against any other modifications.
+ */
+int
+xfs_exch_range_prep(
+ struct file *file1,
+ struct file *file2,
+ struct xfs_exch_range *fxr,
+ unsigned int blocksize)
+{
+ struct inode *inode1 = file_inode(file1);
+ struct inode *inode2 = file_inode(file2);
+ bool same_inode = (inode1 == inode2);
+ int error;
+
+ /* Check that we don't violate system file offset limits. */
+ error = xfs_exch_range_checks(file1, file2, fxr, blocksize);
+ if (error || fxr->length == 0)
+ return error;
+
+ /* Wait for the completion of any pending IOs on both files */
+ inode_dio_wait(inode1);
+ if (!same_inode)
+ inode_dio_wait(inode2);
+
+ error = filemap_write_and_wait_range(inode1->i_mapping,
+ fxr->file1_offset,
+ fxr->file1_offset + fxr->length - 1);
+ if (error)
+ return error;
+
+ error = filemap_write_and_wait_range(inode2->i_mapping,
+ fxr->file2_offset,
+ fxr->file2_offset + fxr->length - 1);
+ if (error)
+ return error;
+
+ /*
+ * If the files or inodes involved require synchronous writes, amend
+ * the request to force the filesystem to flush all data and metadata
+ * to disk after the operation completes.
+ */
+ if (((file1->f_flags | file2->f_flags) & (__O_SYNC | O_DSYNC)) ||
+ IS_SYNC(inode1) || IS_SYNC(inode2))
+ fxr->flags |= XFS_EXCH_RANGE_FSYNC;
+
+ return 0;
+}
+
+/*
+ * Finish a range exchange operation, if it was successful. Caller must ensure
+ * that the inodes are still locked against any other modifications.
+ */
+int
+xfs_exch_range_finish(
+ struct file *file1,
+ struct file *file2)
+{
+ int error;
+
+ error = file_remove_privs(file1);
+ if (error)
+ return error;
+ if (file_inode(file1) == file_inode(file2))
+ return 0;
+
+ return file_remove_privs(file2);
+}
+
+/* Decide if it's ok to remap the selected range of a given file. */
+STATIC int
+xfs_exch_range_verify_area(
+ struct file *file,
+ loff_t pos,
+ struct xfs_exch_range *fxr)
+{
+ int64_t len = fxr->length;
+
+ if (pos < 0)
+ return -EINVAL;
+
+ if (fxr->flags & XFS_EXCH_RANGE_TO_EOF)
+ len = min_t(int64_t, len, i_size_read(file_inode(file)) - pos);
+ return remap_verify_area(file, pos, len, true);
+}
+
+/* Prepare for and exchange parts of two files. */
+static inline int
+__xfs_exch_range(
+ struct file *file1,
+ struct file *file2,
+ struct xfs_exch_range *fxr)
+{
+ struct inode *inode1 = file_inode(file1);
+ struct inode *inode2 = file_inode(file2);
+ int ret;
+
+ if ((fxr->flags & ~XFS_EXCH_RANGE_ALL_FLAGS) ||
+ memchr_inv(&fxr->pad, 0, sizeof(fxr->pad)))
+ return -EINVAL;
+
+ if ((fxr->flags & XFS_EXCH_RANGE_FULL_FILES) &&
+ (fxr->flags & XFS_EXCH_RANGE_TO_EOF))
+ return -EINVAL;
+
+ /*
+ * The ioctl enforces that src and dest files are on the same mount.
+ * However, they only need to be on the same file system.
+ */
+ if (inode1->i_sb != inode2->i_sb)
+ return -EXDEV;
+
+ /* This only works for regular files. */
+ if (S_ISDIR(inode1->i_mode) || S_ISDIR(inode2->i_mode))
+ return -EISDIR;
+ if (!S_ISREG(inode1->i_mode) || !S_ISREG(inode2->i_mode))
+ return -EINVAL;
+
+ ret = generic_file_rw_checks(file1, file2);
+ if (ret < 0)
+ return ret;
+
+ ret = generic_file_rw_checks(file2, file1);
+ if (ret < 0)
+ return ret;
+
+ ret = xfs_exch_range_verify_area(file1, fxr->file1_offset, fxr);
+ if (ret)
+ return ret;
+
+ ret = xfs_exch_range_verify_area(file2, fxr->file2_offset, fxr);
+ if (ret)
+ return ret;
+
+ ret = -EOPNOTSUPP; /* XXX call out to xfs code */
+ if (ret)
+ return ret;
+
+ fsnotify_modify(file1);
+ if (file2 != file1)
+ fsnotify_modify(file2);
+ return 0;
+}
+
+/* Exchange parts of two files. */
+int
+xfs_exch_range(
+ struct file *file1,
+ struct file *file2,
+ struct xfs_exch_range *fxr)
+{
+ int error;
+
+ file_start_write(file2);
+ error = __xfs_exch_range(file1, file2, fxr);
+ file_end_write(file2);
+
+ return error;
+}
new file mode 100644
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2020-2023 Oracle. All Rights Reserved.
+ * Author: Darrick J. Wong <djwong@kernel.org>
+ */
+#ifndef __XFS_XCHGRANGE_H__
+#define __XFS_XCHGRANGE_H__
+
+/* Prepare generic VFS data structures for file exchanges */
+
+int xfs_exch_range_prep(struct file *file1, struct file *file2,
+ struct xfs_exch_range *fxr, unsigned int blocksize);
+int xfs_exch_range_finish(struct file *file1, struct file *file2);
+
+int xfs_exch_range(struct file *file1, struct file *file2,
+ struct xfs_exch_range *fxr);
+
+#endif /* __XFS_XCHGRANGE_H__ */
@@ -1884,6 +1884,7 @@ extern ssize_t vfs_copy_file_range(struct file *, loff_t , struct file *,
extern ssize_t generic_copy_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
size_t len, unsigned int flags);
+int remap_verify_area(struct file *file, loff_t pos, loff_t len, bool write);
int __generic_remap_file_range_prep(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t *len, unsigned int remap_flags,