diff mbox series

[3/3] sysclt: Clarify the results of selftest run

Message ID 20231121-jag-fix_out_of_bounds_insert-v1-3-571e76d51316@samsung.com (mailing list archive)
State New, archived
Headers show
Series sysctl: Fix out of bounds access for empty syscl ctl_tables | expand

Commit Message

Joel Granados via B4 Relay Nov. 21, 2023, 11:02 a.m. UTC 
From: Joel Granados <j.granados@samsung.com>

In some cases the result of test were hidden inside the stdout and it
was difficult to identify when a test was skipped and why.

List of changes
1. Capitalize all the words that express a test result : "OK", "SKIPPED"
   and "FAIL".
2. Place all test result text at the end of the message. This will
   prevent the result from being hidden when stdout is verbose.
3. Any other explanation that comes after the result text will be placed
   in a new line.
4. All failures are marked as "FAIL"
5. Pipped the failure to stderr in tests 8, 9, 10.
6. Replaced bogus "FAIL" with "SKIPPED" in test 0007
7. All "..." are prefixed and followed by a space.

Signed-off-by: Joel Granados <j.granados@samsung.com>
---
 tools/testing/selftests/sysctl/sysctl.sh | 123 ++++++++++++++++---------------
 1 file changed, 62 insertions(+), 61 deletions(-)
diff mbox series

Patch

diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
index e956d2c3b7e9..84472b436c07 100755
--- a/tools/testing/selftests/sysctl/sysctl.sh
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -64,7 +64,7 @@  function check_production_sysctl_writes_strict()
 	else
 		old_strict=$(cat ${WRITES_STRICT})
 		if [ "$old_strict" = "1" ]; then
-			echo "ok"
+			echo "OK"
 		else
 			echo "FAIL, strict value is 0 but force to 1 to continue" >&2
 			echo "1" > ${WRITES_STRICT}
@@ -226,7 +226,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		exit 1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Checking sysctl is not set to test value ... "
@@ -234,7 +234,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		exit 1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Writing sysctl from shell ... "
@@ -243,7 +243,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		exit 1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Resetting sysctl to original value ... "
@@ -252,7 +252,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		exit 1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	# Now that we've validated the sanity of "set_test" and "set_orig",
@@ -266,7 +266,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Writing middle of sysctl after synchronized seek ... "
@@ -276,7 +276,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Writing beyond end of sysctl ... "
@@ -286,7 +286,7 @@  run_numerictests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Writing sysctl with multiple long writes ... "
@@ -297,14 +297,14 @@  run_numerictests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
 
 check_failure()
 {
-	echo -n "Testing that $1 fails as expected..."
+	echo -n "Testing that $1 fails as expected ... "
 	reset_vals
 	TEST_STR="$1"
 	orig="$(cat $TARGET)"
@@ -315,7 +315,7 @@  check_failure()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
@@ -357,7 +357,7 @@  run_wideint_tests()
 # Your test must accept digits 3 and 4 to use this
 run_limit_digit()
 {
-	echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ..."
+	echo -n "Checking ignoring spaces up to PAGE_SIZE works on write ... "
 	reset_vals
 
 	LIMIT=$((MAX_DIGITS -1))
@@ -369,11 +369,11 @@  run_limit_digit()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
-	echo -n "Checking passing PAGE_SIZE of spaces fails on write ..."
+	echo -n "Checking passing PAGE_SIZE of spaces fails on write ... "
 	reset_vals
 
 	LIMIT=$((MAX_DIGITS))
@@ -385,7 +385,7 @@  run_limit_digit()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
@@ -393,7 +393,7 @@  run_limit_digit()
 # You are using an int
 run_limit_digit_int()
 {
-	echo -n "Testing INT_MAX works ..."
+	echo -n "Testing INT_MAX works ... "
 	reset_vals
 	TEST_STR="$INT_MAX"
 	echo -n $TEST_STR > $TARGET
@@ -402,11 +402,11 @@  run_limit_digit_int()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
-	echo -n "Testing INT_MAX + 1 will fail as expected..."
+	echo -n "Testing INT_MAX + 1 will fail as expected ... "
 	reset_vals
 	let TEST_STR=$INT_MAX+1
 	echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -415,11 +415,11 @@  run_limit_digit_int()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
-	echo -n "Testing negative values will work as expected..."
+	echo -n "Testing negative values will work as expected ... "
 	reset_vals
 	TEST_STR="-3"
 	echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -427,7 +427,7 @@  run_limit_digit_int()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
@@ -443,7 +443,7 @@  run_limit_digit_int_array()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
@@ -460,7 +460,7 @@  run_limit_digit_int_array()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
@@ -478,7 +478,7 @@  run_limit_digit_int_array()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
@@ -495,7 +495,7 @@  run_limit_digit_int_array()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
@@ -503,7 +503,7 @@  run_limit_digit_int_array()
 # You are using an unsigned int
 run_limit_digit_uint()
 {
-	echo -n "Testing UINT_MAX works ..."
+	echo -n "Testing UINT_MAX works ... "
 	reset_vals
 	TEST_STR="$UINT_MAX"
 	echo -n $TEST_STR > $TARGET
@@ -512,11 +512,11 @@  run_limit_digit_uint()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
-	echo -n "Testing UINT_MAX + 1 will fail as expected..."
+	echo -n "Testing UINT_MAX + 1 will fail as expected ... "
 	reset_vals
 	TEST_STR=$(($UINT_MAX+1))
 	echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -525,11 +525,11 @@  run_limit_digit_uint()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 
-	echo -n "Testing negative values will not work as expected ..."
+	echo -n "Testing negative values will not work as expected ... "
 	reset_vals
 	TEST_STR="-3"
 	echo -n $TEST_STR > $TARGET 2> /dev/null
@@ -538,7 +538,7 @@  run_limit_digit_uint()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 	test_rc
 }
@@ -552,7 +552,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Writing middle of sysctl after unsynchronized seek ... "
@@ -562,7 +562,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
@@ -573,7 +573,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Checking sysctl keeps original string on overflow append ... "
@@ -584,7 +584,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Checking sysctl stays NULL terminated on write ... "
@@ -595,7 +595,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	echo -n "Checking sysctl stays NULL terminated on overwrite ... "
@@ -606,7 +606,7 @@  run_stringtests()
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 	fi
 
 	test_rc
@@ -651,7 +651,7 @@  run_bitmaptest() {
 		fi
 	done
 
-	echo -n "Checking bitmap handler... "
+	echo -n "Checking bitmap handler ... "
 	TEST_FILE=$(mktemp)
 	echo -n "$TEST_STR" > $TEST_FILE
 
@@ -666,7 +666,7 @@  run_bitmaptest() {
 		echo "FAIL" >&2
 		rc=1
 	else
-		echo "ok"
+		echo "OK"
 		rc=0
 	fi
 	test_rc
@@ -743,89 +743,90 @@  sysctl_test_0006()
 sysctl_test_0007()
 {
 	TARGET="${SYSCTL}/$(get_test_target 0007)"
+	echo -n "Testing if $TARGET is set to 1 ... "
+
 	if [ ! -f $TARGET ]; then
-		echo "Skipping test for $TARGET as it is not present ..."
+		echo -e "SKIPPING\n$TARGET is not present"
 		return $ksft_skip
 	fi
 
 	if [ -d $DIR ]; then
-		echo "Boot param test only possible sysctl_test is built-in, not module:"
+		echo -e "SKIPPING\nTest only possible if sysctl_test is built-in, not module:"
 		cat $TEST_DIR/config >&2
 		return $ksft_skip
 	fi
 
-	echo -n "Testing if $TARGET is set to 1 ..."
 	ORIG=$(cat "${TARGET}")
 
 	if [ x$ORIG = "x1" ]; then
-		echo "ok"
+		echo "OK"
 		return 0
 	fi
-	echo "FAIL"
-	echo "Checking if /proc/cmdline contains setting of the expected parameter ..."
+
 	if [ ! -f /proc/cmdline ]; then
-		echo "/proc/cmdline does not exist, test inconclusive"
-		return 0
+		echo -e "SKIPPING\nThere is no /proc/cmdline to check for paramter"
+		return $ksft_skip
 	fi
 
 	FOUND=$(grep -c "sysctl[./]debug[./]test_sysctl[./]boot_int=1" /proc/cmdline)
 	if [ $FOUND = "1" ]; then
-		echo "Kernel param found but $TARGET is not 1, TEST FAILED"
+		echo -e "FAIL\nKernel param found but $TARGET is not 1." >&2
 		rc=1
 		test_rc
 	fi
 
-	echo "Skipping test, expected kernel parameter missing."
-	echo "To perform this test, make sure kernel is booted with parameter: sysctl.debug.test_sysctl.boot_int=1"
+	echo -e "SKIPPING\nExpected kernel parameter missing."
+	echo "Kernel must be booted with parameter: sysctl.debug.test_sysctl.boot_int=1"
 	return $ksft_skip
 }
 
 sysctl_test_0008()
 {
 	TARGET="${SYSCTL}/$(get_test_target 0008)"
+	echo -n "Testing if $TARGET is matched in kernel ... "
+
 	if [ ! -f $TARGET ]; then
-		echo "Skipping test for $TARGET as it is not present ..."
+		echo -e "SKIPPING\n$TARGET is not present"
 		return $ksft_skip
 	fi
 
-	echo -n "Testing if $TARGET is matched in kernel"
 	ORIG_VALUE=$(cat "${TARGET}")
 
 	if [ $ORIG_VALUE -ne 1 ]; then
-		echo "TEST FAILED"
+		echo "FAIL" >&2
 		rc=1
 		test_rc
 	fi
 
-	echo "ok"
+	echo "OK"
 	return 0
 }
 
 sysctl_test_0009()
 {
 	TARGET="${SYSCTL}/$(get_test_target 0009)"
-	echo -n "Testing if $TARGET unregistered correctly ..."
+	echo -n "Testing if $TARGET unregistered correctly ... "
 	if [ -d $TARGET ]; then
-		echo "TEST FAILED"
+		echo "FAIL" >&2
 		rc=1
 		test_rc
 	fi
 
-	echo "ok"
+	echo "OK"
 	return 0
 }
 
 sysctl_test_0010()
 {
 	TARGET="${SYSCTL}/$(get_test_target 0010)"
-	echo -n "Testing that $TARGET was not created  ..."
+	echo -n "Testing that $TARGET was not created ... "
 	if [ -d $TARGET ]; then
-		echo "TEST FAILED"
+		echo "FAIL" >&2
 		rc=1
 		test_rc
 	fi
 
-	echo "ok"
+	echo "OK"
 	return 0
 }
 
@@ -957,7 +958,7 @@  function skip_test()
 	if target_exists $TEST_TARGET $TEST_ID; then
 		TEST_SKIP=$(get_test_skip_no_target $TEST_ID)
 		if [[ $TEST_SKIP -eq "1" ]]; then
-			echo "Target for test $TEST_ID: $TEST_TARGET not exist, skipping test ..."
+			echo "Target $TEST_TARGET for test $TEST_ID does not exist ... SKIPPING"
 			return 0
 		fi
 	fi