@@ -3,6 +3,9 @@
# Makefile for the FUSE filesystem.
#
+# Needed for trace events
+ccflags-y = -I$(src)
+
obj-$(CONFIG_FUSE_FS) += fuse.o
obj-$(CONFIG_CUSE) += cuse.o
obj-$(CONFIG_VIRTIO_FS) += virtiofs.o
@@ -22,6 +22,9 @@
#include <linux/splice.h>
#include <linux/sched.h>
+#define CREATE_TRACE_POINTS
+#include "fuse_trace.h"
+
MODULE_ALIAS_MISCDEV(FUSE_MINOR);
MODULE_ALIAS("devname:fuse");
@@ -230,6 +233,7 @@ __releases(fiq->lock)
fuse_len_args(req->args->in_numargs,
(struct fuse_arg *) req->args->in_args);
list_add_tail(&req->list, &fiq->pending);
+ trace_fuse_request_send(req);
fiq->ops->wake_pending_and_unlock(fiq);
}
@@ -286,6 +290,8 @@ void fuse_request_end(struct fuse_req *req)
if (test_and_set_bit(FR_FINISHED, &req->flags))
goto put_request;
+ trace_fuse_request_end(req);
+
/*
* test_and_set_bit() implies smp_mb() between bit
* changing and below FR_INTERRUPTED check. Pairs with
new file mode 100644
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM fuse
+
+#if !defined(_TRACE_FUSE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_FUSE_H
+
+#include <linux/tracepoint.h>
+
+#define OPCODES \
+ EM( FUSE_LOOKUP, "FUSE_LOOKUP") \
+ EM( FUSE_FORGET, "FUSE_FORGET") \
+ EM( FUSE_GETATTR, "FUSE_GETATTR") \
+ EM( FUSE_SETATTR, "FUSE_SETATTR") \
+ EM( FUSE_READLINK, "FUSE_READLINK") \
+ EM( FUSE_SYMLINK, "FUSE_SYMLINK") \
+ EM( FUSE_MKNOD, "FUSE_MKNOD") \
+ EM( FUSE_MKDIR, "FUSE_MKDIR") \
+ EM( FUSE_UNLINK, "FUSE_UNLINK") \
+ EM( FUSE_RMDIR, "FUSE_RMDIR") \
+ EM( FUSE_RENAME, "FUSE_RENAME") \
+ EM( FUSE_LINK, "FUSE_LINK") \
+ EM( FUSE_OPEN, "FUSE_OPEN") \
+ EM( FUSE_READ, "FUSE_READ") \
+ EM( FUSE_WRITE, "FUSE_WRITE") \
+ EM( FUSE_STATFS, "FUSE_STATFS") \
+ EM( FUSE_RELEASE, "FUSE_RELEASE") \
+ EM( FUSE_FSYNC, "FUSE_FSYNC") \
+ EM( FUSE_SETXATTR, "FUSE_SETXATTR") \
+ EM( FUSE_GETXATTR, "FUSE_GETXATTR") \
+ EM( FUSE_LISTXATTR, "FUSE_LISTXATTR") \
+ EM( FUSE_REMOVEXATTR, "FUSE_REMOVEXATTR") \
+ EM( FUSE_FLUSH, "FUSE_FLUSH") \
+ EM( FUSE_INIT, "FUSE_INIT") \
+ EM( FUSE_OPENDIR, "FUSE_OPENDIR") \
+ EM( FUSE_READDIR, "FUSE_READDIR") \
+ EM( FUSE_RELEASEDIR, "FUSE_RELEASEDIR") \
+ EM( FUSE_FSYNCDIR, "FUSE_FSYNCDIR") \
+ EM( FUSE_GETLK, "FUSE_GETLK") \
+ EM( FUSE_SETLK, "FUSE_SETLK") \
+ EM( FUSE_SETLKW, "FUSE_SETLKW") \
+ EM( FUSE_ACCESS, "FUSE_ACCESS") \
+ EM( FUSE_CREATE, "FUSE_CREATE") \
+ EM( FUSE_INTERRUPT, "FUSE_INTERRUPT") \
+ EM( FUSE_BMAP, "FUSE_BMAP") \
+ EM( FUSE_DESTROY, "FUSE_DESTROY") \
+ EM( FUSE_IOCTL, "FUSE_IOCTL") \
+ EM( FUSE_POLL, "FUSE_POLL") \
+ EM( FUSE_NOTIFY_REPLY, "FUSE_NOTIFY_REPLY") \
+ EM( FUSE_BATCH_FORGET, "FUSE_BATCH_FORGET") \
+ EM( FUSE_FALLOCATE, "FUSE_FALLOCATE") \
+ EM( FUSE_READDIRPLUS, "FUSE_READDIRPLUS") \
+ EM( FUSE_RENAME2, "FUSE_RENAME2") \
+ EM( FUSE_LSEEK, "FUSE_LSEEK") \
+ EM( FUSE_COPY_FILE_RANGE, "FUSE_COPY_FILE_RANGE") \
+ EM( FUSE_SETUPMAPPING, "FUSE_SETUPMAPPING") \
+ EM( FUSE_REMOVEMAPPING, "FUSE_REMOVEMAPPING") \
+ EM( FUSE_SYNCFS, "FUSE_SYNCFS") \
+ EM( FUSE_TMPFILE, "FUSE_TMPFILE") \
+ EM( FUSE_STATX, "FUSE_STATX") \
+ EMe(CUSE_INIT, "CUSE_INIT")
+
+/*
+ * This will turn the above table into TRACE_DEFINE_ENUM() for each of the
+ * entries.
+ */
+#undef EM
+#undef EMe
+#define EM(a, b) TRACE_DEFINE_ENUM(a);
+#define EMe(a, b) TRACE_DEFINE_ENUM(a);
+
+OPCODES
+
+/* Now we redfine it with the table that __print_symbolic needs. */
+#undef EM
+#undef EMe
+#define EM(a, b) {a, b},
+#define EMe(a, b) {a, b}
+
+TRACE_EVENT(fuse_request_send,
+ TP_PROTO(const struct fuse_req *req),
+
+ TP_ARGS(req),
+
+ TP_STRUCT__entry(
+ __field(dev_t, connection)
+ __field(uint64_t, unique)
+ __field(enum fuse_opcode, opcode)
+ __field(uint32_t, len)
+ ),
+
+ TP_fast_assign(
+ __entry->connection = req->fm->fc->dev;
+ __entry->unique = req->in.h.unique;
+ __entry->opcode = req->in.h.opcode;
+ __entry->len = req->in.h.len;
+ ),
+
+ TP_printk("connection %u req %llu opcode %u (%s) len %u ",
+ __entry->connection, __entry->unique, __entry->opcode,
+ __print_symbolic(__entry->opcode, OPCODES), __entry->len)
+);
+
+TRACE_EVENT(fuse_request_end,
+ TP_PROTO(const struct fuse_req *req),
+
+ TP_ARGS(req),
+
+ TP_STRUCT__entry(
+ __field(dev_t, connection)
+ __field(uint64_t, unique)
+ __field(uint32_t, len)
+ __field(int32_t, error)
+ ),
+
+ TP_fast_assign(
+ __entry->connection = req->fm->fc->dev;
+ __entry->unique = req->in.h.unique;
+ __entry->len = req->out.h.len;
+ __entry->error = req->out.h.error;
+ ),
+
+ TP_printk("connection %u req %llu len %u error %d", __entry->connection,
+ __entry->unique, __entry->len, __entry->error)
+);
+
+#endif /* _TRACE_FUSE_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE fuse_trace
+#include <trace/define_trace.h>
I've been timing various fuse operations and it's quite annoying to do with kprobes. Add two tracepoints for sending and ending fuse requests to make it easier to debug and time various operations. Signed-off-by: Josef Bacik <josef@toxicpanda.com> --- fs/fuse/Makefile | 3 + fs/fuse/dev.c | 6 ++ fs/fuse/fuse_trace.h | 132 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 141 insertions(+) create mode 100644 fs/fuse/fuse_trace.h