@@ -102,11 +102,13 @@ static inline void kuap_update_sr(u32 sr, u32 addr, u32 end)
isync(); /* Context sync required after mtsrin() */
}
-static inline void allow_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+ u32 size, unsigned long dir)
{
u32 addr, end;
- if (__builtin_constant_p(to) && to == NULL)
+ BUILD_BUG_ON(!__builtin_constant_p(dir));
+ if (!(dir & KUAP_W))
return;
addr = (__force u32)to;
@@ -119,11 +121,16 @@ static inline void allow_user_access(void __user *to, const void __user *from, u
kuap_update_sr(mfsrin(addr) & ~SR_KS, addr, end); /* Clear Ks */
}
-static inline void prevent_user_access(void __user *to, const void __user *from, u32 size)
+static __always_inline void prevent_user_access(void __user *to, const void __user *from,
+ u32 size, unsigned long dir)
{
u32 addr = (__force u32)to;
u32 end = min(addr + size, TASK_SIZE);
+ BUILD_BUG_ON(!__builtin_constant_p(dir));
+ if (!(dir & KUAP_W))
+ return;
+
if (!addr || addr >= TASK_SIZE || !size)
return;
@@ -77,20 +77,21 @@ static inline void set_kuap(unsigned long value)
isync();
}
-static inline void allow_user_access(void __user *to, const void __user *from,
- unsigned long size)
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+ unsigned long size, unsigned long dir)
{
// This is written so we can resolve to a single case at build time
- if (__builtin_constant_p(to) && to == NULL)
+ BUILD_BUG_ON(!__builtin_constant_p(dir));
+ if (dir == KUAP_R)
set_kuap(AMR_KUAP_BLOCK_WRITE);
- else if (__builtin_constant_p(from) && from == NULL)
+ else if (dir == KUAP_W)
set_kuap(AMR_KUAP_BLOCK_READ);
else
set_kuap(0);
}
static inline void prevent_user_access(void __user *to, const void __user *from,
- unsigned long size)
+ unsigned long size, unsigned long dir)
{
set_kuap(AMR_KUAP_BLOCKED);
}
@@ -2,6 +2,10 @@
#ifndef _ASM_POWERPC_KUP_H_
#define _ASM_POWERPC_KUP_H_
+#define KUAP_R 1
+#define KUAP_W 2
+#define KUAP_RW (KUAP_R | KUAP_W)
+
#ifdef CONFIG_PPC64
#include <asm/book3s/64/kup-radix.h>
#endif
@@ -42,9 +46,9 @@ void setup_kuap(bool disabled);
#else
static inline void setup_kuap(bool disabled) { }
static inline void allow_user_access(void __user *to, const void __user *from,
- unsigned long size) { }
+ unsigned long size, unsigned long dir) { }
static inline void prevent_user_access(void __user *to, const void __user *from,
- unsigned long size) { }
+ unsigned long size, unsigned long dir) { }
static inline bool
bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
{
@@ -54,24 +58,36 @@ bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
static inline void allow_read_from_user(const void __user *from, unsigned long size)
{
- allow_user_access(NULL, from, size);
+ allow_user_access(NULL, from, size, KUAP_R);
}
static inline void allow_write_to_user(void __user *to, unsigned long size)
{
- allow_user_access(to, NULL, size);
+ allow_user_access(to, NULL, size, KUAP_W);
+}
+
+static inline void allow_read_write_user(void __user *to, const void __user *from,
+ unsigned long size)
+{
+ allow_user_access(to, from, size, KUAP_RW);
}
static inline void prevent_read_from_user(const void __user *from, unsigned long size)
{
- prevent_user_access(NULL, from, size);
+ prevent_user_access(NULL, from, size, KUAP_R);
}
static inline void prevent_write_to_user(void __user *to, unsigned long size)
{
- prevent_user_access(to, NULL, size);
+ prevent_user_access(to, NULL, size, KUAP_W);
+}
+
+static inline void prevent_read_write_user(void __user *to, const void __user *from,
+ unsigned long size)
+{
+ prevent_user_access(to, from, size, KUAP_RW);
}
#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_POWERPC_KUP_H_ */
+#endif /* _ASM_POWERPC_KUAP_H_ */
@@ -35,13 +35,13 @@
#include <asm/reg.h>
static inline void allow_user_access(void __user *to, const void __user *from,
- unsigned long size)
+ unsigned long size, unsigned long dir)
{
mtspr(SPRN_MD_AP, MD_APG_INIT);
}
static inline void prevent_user_access(void __user *to, const void __user *from,
- unsigned long size)
+ unsigned long size, unsigned long dir)
{
mtspr(SPRN_MD_AP, MD_APG_KUAP);
}
@@ -313,9 +313,9 @@ raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
unsigned long ret;
barrier_nospec();
- allow_user_access(to, from, n);
+ allow_read_write_user(to, from, n);
ret = __copy_tofrom_user(to, from, n);
- prevent_user_access(to, from, n);
+ prevent_read_write_user(to, from, n);
return ret;
}
#endif /* __powerpc64__ */
__builtin_constant_p() always return 0 for pointers, so on RADIX we always end up opening both direction (by writing 0 in SPR29): 0000000000000170 <._copy_to_user>: ... 1b0: 4c 00 01 2c isync 1b4: 39 20 00 00 li r9,0 1b8: 7d 3d 03 a6 mtspr 29,r9 1bc: 4c 00 01 2c isync 1c0: 48 00 00 01 bl 1c0 <._copy_to_user+0x50> 1c0: R_PPC64_REL24 .__copy_tofrom_user ... 0000000000000220 <._copy_from_user>: ... 2ac: 4c 00 01 2c isync 2b0: 39 20 00 00 li r9,0 2b4: 7d 3d 03 a6 mtspr 29,r9 2b8: 4c 00 01 2c isync 2bc: 7f c5 f3 78 mr r5,r30 2c0: 7f 83 e3 78 mr r3,r28 2c4: 48 00 00 01 bl 2c4 <._copy_from_user+0xa4> 2c4: R_PPC64_REL24 .__copy_tofrom_user ... Use an explicit parameter for direction selection, so that GCC is able to see it is a constant: 00000000000001b0 <._copy_to_user>: ... 1f0: 4c 00 01 2c isync 1f4: 3d 20 40 00 lis r9,16384 1f8: 79 29 07 c6 rldicr r9,r9,32,31 1fc: 7d 3d 03 a6 mtspr 29,r9 200: 4c 00 01 2c isync 204: 48 00 00 01 bl 204 <._copy_to_user+0x54> 204: R_PPC64_REL24 .__copy_tofrom_user ... 0000000000000260 <._copy_from_user>: ... 2ec: 4c 00 01 2c isync 2f0: 39 20 ff ff li r9,-1 2f4: 79 29 00 04 rldicr r9,r9,0,0 2f8: 7d 3d 03 a6 mtspr 29,r9 2fc: 4c 00 01 2c isync 300: 7f c5 f3 78 mr r5,r30 304: 7f 83 e3 78 mr r3,r28 308: 48 00 00 01 bl 308 <._copy_from_user+0xa8> 308: R_PPC64_REL24 .__copy_tofrom_user ... Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> --- v2: no change v3: no change --- arch/powerpc/include/asm/book3s/32/kup.h | 13 ++++++-- .../powerpc/include/asm/book3s/64/kup-radix.h | 11 +++---- arch/powerpc/include/asm/kup.h | 30 ++++++++++++++----- arch/powerpc/include/asm/nohash/32/kup-8xx.h | 4 +-- arch/powerpc/include/asm/uaccess.h | 4 +-- 5 files changed, 43 insertions(+), 19 deletions(-)