@@ -34,8 +34,6 @@ parameters may be changed at runtime by the command
See drivers/scsi/BusLogic.c, comment before function
BusLogic_ParseDriverOptions().
- eata= [HW,SCSI]
-
fdomain= [HW,SCSI]
See header of drivers/scsi/fdomain.c.
@@ -5005,12 +5005,6 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/tuners/e4000*
-EATA ISA/EISA/PCI SCSI DRIVER
-M: Dario Ballabio <ballabio_dario@emc.com>
-L: linux-scsi@vger.kernel.org
-S: Maintained
-F: drivers/scsi/eata.c
-
EC100 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
@@ -640,68 +640,6 @@ config SCSI_DMX3191D
To compile this driver as a module, choose M here: the
module will be called dmx3191d.
-config SCSI_EATA
- tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
- ---help---
- This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
- ISA and all EISA I/O addresses are probed looking for the "EATA"
- signature. The addresses of all the PCI SCSI controllers reported
- by the PCI subsystem are probed as well.
-
- You want to read the start of <file:drivers/scsi/eata.c> and the
- SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called eata.
-
-config SCSI_EATA_TAGGED_QUEUE
- bool "enable tagged command queueing"
- depends on SCSI_EATA
- help
- This is a feature of SCSI-2 which improves performance: the host
- adapter can send several SCSI commands to a device's queue even if
- previous commands haven't finished yet.
- This is equivalent to the "eata=tc:y" boot option.
-
-config SCSI_EATA_LINKED_COMMANDS
- bool "enable elevator sorting"
- depends on SCSI_EATA
- help
- This option enables elevator sorting for all probed SCSI disks and
- CD-ROMs. It definitely reduces the average seek distance when doing
- random seeks, but this does not necessarily result in a noticeable
- performance improvement: your mileage may vary...
- This is equivalent to the "eata=lc:y" boot option.
-
-config SCSI_EATA_MAX_TAGS
- int "maximum number of queued commands"
- depends on SCSI_EATA
- default "16"
- help
- This specifies how many SCSI commands can be maximally queued for
- each probed SCSI device. You should reduce the default value of 16
- only if you have disks with buggy or limited tagged command support.
- Minimum is 2 and maximum is 62. This value is also the window size
- used by the elevator sorting option above. The effective value used
- by the driver for each probed SCSI device is reported at boot time.
- This is equivalent to the "eata=mq:8" boot option.
-
-config SCSI_EATA_PIO
- tristate "EATA-PIO (old DPT PM2001, PM2012A) support"
- depends on (ISA || EISA || PCI) && SCSI && BROKEN
- ---help---
- This driver supports all EATA-PIO protocol compliant SCSI Host
- Adapters like the DPT PM2001 and the PM2012A. EATA-DMA compliant
- host adapters could also use this driver but are discouraged from
- doing so, since this driver only supports hard disks and lacks
- numerous features. You might want to have a look at the SCSI-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called eata_pio.
-
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
depends on (ISA || PCI) && SCSI
@@ -93,8 +93,6 @@ obj-$(CONFIG_SCSI_HPSA) += hpsa.o
obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi/
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
-obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
-obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
obj-$(CONFIG_CXLFLASH) += cxlflash/
deleted file mode 100644
@@ -1,2571 +0,0 @@
-/*
- * eata.c - Low-level driver for EATA/DMA SCSI host adapters.
- *
- * 03 Jun 2003 Rev. 8.10 for linux-2.5.70
- * + Update for new IRQ API.
- * + Use "goto" when appropriate.
- * + Drop eata.h.
- * + Update for new module_param API.
- * + Module parameters can now be specified only in the
- * same format as the kernel boot options.
- *
- * boot option old module param
- * ----------- ------------------
- * addr,... io_port=addr,...
- * lc:[y|n] linked_comm=[1|0]
- * mq:xx max_queue_depth=xx
- * tm:[0|1|2] tag_mode=[0|1|2]
- * et:[y|n] ext_tran=[1|0]
- * rs:[y|n] rev_scan=[1|0]
- * ip:[y|n] isa_probe=[1|0]
- * ep:[y|n] eisa_probe=[1|0]
- * pp:[y|n] pci_probe=[1|0]
- *
- * A valid example using the new parameter format is:
- * modprobe eata "eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n"
- *
- * which is equivalent to the old format:
- * modprobe eata io_port=0x7410,0x230 linked_comm=1 tag_mode=0 \
- * max_queue_depth=4 eisa_probe=0
- *
- * 12 Feb 2003 Rev. 8.04 for linux 2.5.60
- * + Release irq before calling scsi_register.
- *
- * 12 Nov 2002 Rev. 8.02 for linux 2.5.47
- * + Release driver_lock before calling scsi_register.
- *
- * 11 Nov 2002 Rev. 8.01 for linux 2.5.47
- * + Fixed bios_param and scsicam_bios_param calling parameters.
- *
- * 28 Oct 2002 Rev. 8.00 for linux 2.5.44-ac4
- * + Use new tcq and adjust_queue_depth api.
- * + New command line option (tm:[0-2]) to choose the type of tags:
- * 0 -> disable tagging ; 1 -> simple tags ; 2 -> ordered tags.
- * Default is tm:0 (tagged commands disabled).
- * For compatibility the "tc:" option is an alias of the "tm:"
- * option; tc:n is equivalent to tm:0 and tc:y is equivalent to
- * tm:1.
- * + The tagged_comm module parameter has been removed, use tag_mode
- * instead, equivalent to the "tm:" boot option.
- *
- * 10 Oct 2002 Rev. 7.70 for linux 2.5.42
- * + Foreport from revision 6.70.
- *
- * 25 Jun 2002 Rev. 6.70 for linux 2.4.19
- * + This release is the first one tested on a Big Endian platform:
- * fixed endian-ness problem due to bitfields;
- * fixed endian-ness problem in read_pio.
- * + Added new options for selectively probing ISA, EISA and PCI bus:
- *
- * Boot option Parameter name Default according to
- *
- * ip:[y|n] isa_probe=[1|0] CONFIG_ISA defined
- * ep:[y|n] eisa_probe=[1|0] CONFIG_EISA defined
- * pp:[y|n] pci_probe=[1|0] CONFIG_PCI defined
- *
- * The default action is to perform probing if the corresponding
- * bus is configured and to skip probing otherwise.
- *
- * + If pci_probe is in effect and a list of I/O ports is specified
- * as parameter or boot option, pci_enable_device() is performed
- * on all pci devices matching PCI_CLASS_STORAGE_SCSI.
- *
- * 21 Feb 2002 Rev. 6.52 for linux 2.4.18
- * + Backport from rev. 7.22 (use io_request_lock).
- *
- * 20 Feb 2002 Rev. 7.22 for linux 2.5.5
- * + Remove any reference to virt_to_bus().
- * + Fix pio hang while detecting multiple HBAs.
- * + Fixed a board detection bug: in a system with
- * multiple ISA/EISA boards, all but the first one
- * were erroneously detected as PCI.
- *
- * 01 Jan 2002 Rev. 7.20 for linux 2.5.1
- * + Use the dynamic DMA mapping API.
- *
- * 19 Dec 2001 Rev. 7.02 for linux 2.5.1
- * + Use SCpnt->sc_data_direction if set.
- * + Use sglist.page instead of sglist.address.
- *
- * 11 Dec 2001 Rev. 7.00 for linux 2.5.1
- * + Use host->host_lock instead of io_request_lock.
- *
- * 1 May 2001 Rev. 6.05 for linux 2.4.4
- * + Clean up all pci related routines.
- * + Fix data transfer direction for opcode SEND_CUE_SHEET (0x5d)
- *
- * 30 Jan 2001 Rev. 6.04 for linux 2.4.1
- * + Call pci_resource_start after pci_enable_device.
- *
- * 25 Jan 2001 Rev. 6.03 for linux 2.4.0
- * + "check_region" call replaced by "request_region".
- *
- * 22 Nov 2000 Rev. 6.02 for linux 2.4.0-test11
- * + Return code checked when calling pci_enable_device.
- * + Removed old scsi error handling support.
- * + The obsolete boot option flag eh:n is silently ignored.
- * + Removed error messages while a disk drive is powered up at
- * boot time.
- * + Improved boot messages: all tagged capable device are
- * indicated as "tagged" or "soft-tagged" :
- * - "soft-tagged" means that the driver is trying to do its
- * own tagging (i.e. the tc:y option is in effect);
- * - "tagged" means that the device supports tagged commands,
- * but the driver lets the HBA be responsible for tagging
- * support.
- *
- * 16 Sep 1999 Rev. 5.11 for linux 2.2.12 and 2.3.18
- * + Updated to the new __setup interface for boot command line options.
- * + When loaded as a module, accepts the new parameter boot_options
- * which value is a string with the same format of the kernel boot
- * command line options. A valid example is:
- * modprobe eata 'boot_options="0x7410,0x230,lc:y,tc:n,mq:4"'
- *
- * 9 Sep 1999 Rev. 5.10 for linux 2.2.12 and 2.3.17
- * + 64bit cleanup for Linux/Alpha platform support
- * (contribution from H.J. Lu).
- *
- * 22 Jul 1999 Rev. 5.00 for linux 2.2.10 and 2.3.11
- * + Removed pre-2.2 source code compatibility.
- * + Added call to pci_set_master.
- *
- * 26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
- * + Added command line option (rs:[y|n]) to reverse the scan order
- * of PCI boards. The default is rs:y, which reverses the BIOS order
- * while registering PCI boards. The default value rs:y generates
- * the same order of all previous revisions of this driver.
- * Pls. note that "BIOS order" might have been reversed itself
- * after the 2.1.9x PCI modifications in the linux kernel.
- * The rs value is ignored when the explicit list of addresses
- * is used by the "eata=port0,port1,..." command line option.
- * + Added command line option (et:[y|n]) to force use of extended
- * translation (255 heads, 63 sectors) as disk geometry.
- * The default is et:n, which uses the disk geometry returned
- * by scsicam_bios_param. The default value et:n is compatible with
- * all previous revisions of this driver.
- *
- * 28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
- * Increased busy timeout from 10 msec. to 200 msec. while
- * processing interrupts.
- *
- * 16 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
- * Improved abort handling during the eh recovery process.
- *
- * 13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
- * The driver is now fully SMP safe, including the
- * abort and reset routines.
- * Added command line options (eh:[y|n]) to choose between
- * new_eh_code and the old scsi code.
- * If linux version >= 2.1.101 the default is eh:y, while the eh
- * option is ignored for previous releases and the old scsi code
- * is used.
- *
- * 18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
- * Reworked interrupt handler.
- *
- * 11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
- * Major reliability improvement: when a batch with overlapping
- * requests is detected, requests are queued one at a time
- * eliminating any possible board or drive reordering.
- *
- * 10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
- * Improved SMP support (if linux version >= 2.1.95).
- *
- * 9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
- * Added support for new PCI code and IO-APIC remapping of irqs.
- * Performance improvement: when sequential i/o is detected,
- * always use direct sort instead of reverse sort.
- *
- * 4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
- * io_port is now unsigned long.
- *
- * 17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
- * Use new scsi error handling code (if linux version >= 2.1.88).
- * Use new interrupt code.
- *
- * 12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
- * Use of udelay inside the wait loops to avoid timeout
- * problems with fast cpus.
- * Removed check about useless calls to the interrupt service
- * routine (reported on SMP systems only).
- * At initialization time "sorted/unsorted" is displayed instead
- * of "linked/unlinked" to reinforce the fact that "linking" is
- * nothing but "elevator sorting" in the actual implementation.
- *
- * 17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
- * Use of serial_number_at_timeout in abort and reset processing.
- * Use of the __initfunc and __initdata macro in setup code.
- * Minor cleanups in the list_statistics code.
- * Increased controller busy timeout in order to better support
- * slow SCSI devices.
- *
- * 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
- * When loading as a module, parameter passing is now supported
- * both in 2.0 and in 2.1 style.
- * Fixed data transfer direction for some SCSI opcodes.
- * Immediate acknowledge to request sense commands.
- * Linked commands to each disk device are now reordered by elevator
- * sorting. Rare cases in which reordering of write requests could
- * cause wrong results are managed.
- * Fixed spurious timeouts caused by long simple queue tag sequences.
- * New command line option (tm:[0-3]) to choose the type of tags:
- * 0 -> mixed (default); 1 -> simple; 2 -> head; 3 -> ordered.
- *
- * 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
- * Added command line options to enable/disable linked commands
- * (lc:[y|n]), tagged commands (tc:[y|n]) and to set the max queue
- * depth (mq:xx). Default is "eata=lc:n,tc:n,mq:16".
- * Improved command linking.
- * Documented how to setup RAID-0 with DPT SmartRAID boards.
- *
- * 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
- * Added linked command support.
- * Improved detection of PCI boards using ISA base addresses.
- *
- * 3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
- * Added support for tagged commands and queue depth adjustment.
- *
- * 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
- * When CONFIG_PCI is defined, BIOS32 is used to include in the
- * list of i/o ports to be probed all the PCI SCSI controllers.
- * The list of i/o ports to be probed can be overwritten by the
- * "eata=port0,port1,...." boot command line option.
- * Scatter/gather lists are now allocated by a number of kmalloc
- * calls, in order to avoid the previous size limit of 64Kb.
- *
- * 16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
- * Added support for EATA 2.0C, PCI, multichannel and wide SCSI.
- *
- * 27 Sep 1996 rev. 2.12 for linux 2.1.0
- * Portability cleanups (virtual/bus addressing, little/big endian
- * support).
- *
- * 09 Jul 1996 rev. 2.11 for linux 2.0.4
- * Number of internal retries is now limited.
- *
- * 16 Apr 1996 rev. 2.10 for linux 1.3.90
- * New argument "reset_flags" to the reset routine.
- *
- * 6 Jul 1995 rev. 2.01 for linux 1.3.7
- * Update required by the new /proc/scsi support.
- *
- * 11 Mar 1995 rev. 2.00 for linux 1.2.0
- * Fixed a bug which prevented media change detection for removable
- * disk drives.
- *
- * 23 Feb 1995 rev. 1.18 for linux 1.1.94
- * Added a check for scsi_register returning NULL.
- *
- * 11 Feb 1995 rev. 1.17 for linux 1.1.91
- * Now DEBUG_RESET is disabled by default.
- * Register a board even if it does not assert DMA protocol support
- * (DPT SK2011B does not report correctly the dmasup bit).
- *
- * 9 Feb 1995 rev. 1.16 for linux 1.1.90
- * Use host->wish_block instead of host->block.
- * New list of Data Out SCSI commands.
- *
- * 8 Feb 1995 rev. 1.15 for linux 1.1.89
- * Cleared target_time_out counter while performing a reset.
- * All external symbols renamed to avoid possible name conflicts.
- *
- * 28 Jan 1995 rev. 1.14 for linux 1.1.86
- * Added module support.
- * Log and do a retry when a disk drive returns a target status
- * different from zero on a recovered error.
- *
- * 24 Jan 1995 rev. 1.13 for linux 1.1.85
- * Use optimized board configuration, with a measured performance
- * increase in the range 10%-20% on i/o throughput.
- *
- * 16 Jan 1995 rev. 1.12 for linux 1.1.81
- * Fix mscp structure comments (no functional change).
- * Display a message if check_region detects a port address
- * already in use.
- *
- * 17 Dec 1994 rev. 1.11 for linux 1.1.74
- * Use the scsicam_bios_param routine. This allows an easy
- * migration path from disk partition tables created using
- * different SCSI drivers and non optimal disk geometry.
- *
- * 15 Dec 1994 rev. 1.10 for linux 1.1.74
- * Added support for ISA EATA boards (DPT PM2011, DPT PM2021).
- * The host->block flag is set for all the detected ISA boards.
- * The detect routine no longer enforces LEVEL triggering
- * for EISA boards, it just prints a warning message.
- *
- * 30 Nov 1994 rev. 1.09 for linux 1.1.68
- * Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
- * Added optional support for using a single board at a time.
- *
- * 18 Nov 1994 rev. 1.08 for linux 1.1.64
- * Forces sg_tablesize = 64 and can_queue = 64 if these
- * values are not correctly detected (DPT PM2012).
- *
- * 14 Nov 1994 rev. 1.07 for linux 1.1.63 Final BETA release.
- * 04 Aug 1994 rev. 1.00 for linux 1.1.39 First BETA release.
- *
- *
- * This driver is based on the CAM (Common Access Method Committee)
- * EATA (Enhanced AT Bus Attachment) rev. 2.0A, using DMA protocol.
- *
- * Copyright (C) 1994-2003 Dario Ballabio (ballabio_dario@emc.com)
- *
- * Alternate email: dario.ballabio@inwind.it, dario.ballabio@tiscalinet.it
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- */
-
-/*
- *
- * Here is a brief description of the DPT SCSI host adapters.
- * All these boards provide an EATA/DMA compatible programming interface
- * and are fully supported by this driver in any configuration, including
- * multiple SCSI channels:
- *
- * PM2011B/9X - Entry Level ISA
- * PM2021A/9X - High Performance ISA
- * PM2012A Old EISA
- * PM2012B Old EISA
- * PM2022A/9X - Entry Level EISA
- * PM2122A/9X - High Performance EISA
- * PM2322A/9X - Extra High Performance EISA
- * PM3021 - SmartRAID Adapter for ISA
- * PM3222 - SmartRAID Adapter for EISA (PM3222W is 16-bit wide SCSI)
- * PM3224 - SmartRAID Adapter for PCI (PM3224W is 16-bit wide SCSI)
- * PM33340UW - SmartRAID Adapter for PCI ultra wide multichannel
- *
- * The above list is just an indication: as a matter of fact all DPT
- * boards using the EATA/DMA protocol are supported by this driver,
- * since they use exactely the same programming interface.
- *
- * The DPT PM2001 provides only the EATA/PIO interface and hence is not
- * supported by this driver.
- *
- * This code has been tested with up to 3 Distributed Processing Technology
- * PM2122A/9X (DPT SCSI BIOS v002.D1, firmware v05E.0) EISA controllers,
- * in any combination of private and shared IRQ.
- * PCI support has been tested using up to 2 DPT PM3224W (DPT SCSI BIOS
- * v003.D0, firmware v07G.0).
- *
- * DPT SmartRAID boards support "Hardware Array" - a group of disk drives
- * which are all members of the same RAID-0, RAID-1 or RAID-5 array implemented
- * in host adapter hardware. Hardware Arrays are fully compatible with this
- * driver, since they look to it as a single disk drive.
- *
- * WARNING: to create a RAID-0 "Hardware Array" you must select "Other Unix"
- * as the current OS in the DPTMGR "Initial System Installation" menu.
- * Otherwise RAID-0 is generated as an "Array Group" (i.e. software RAID-0),
- * which is not supported by the actual SCSI subsystem.
- * To get the "Array Group" functionality, the Linux MD driver must be used
- * instead of the DPT "Array Group" feature.
- *
- * Multiple ISA, EISA and PCI boards can be configured in the same system.
- * It is suggested to put all the EISA boards on the same IRQ level, all
- * the PCI boards on another IRQ level, while ISA boards cannot share
- * interrupts.
- *
- * If you configure multiple boards on the same IRQ, the interrupt must
- * be _level_ triggered (not _edge_ triggered).
- *
- * This driver detects EATA boards by probes at fixed port addresses,
- * so no BIOS32 or PCI BIOS support is required.
- * The suggested way to detect a generic EATA PCI board is to force on it
- * any unused EISA address, even if there are other controllers on the EISA
- * bus, or even if you system has no EISA bus at all.
- * Do not force any ISA address on EATA PCI boards.
- *
- * If PCI bios support is configured into the kernel, BIOS32 is used to
- * include in the list of i/o ports to be probed all the PCI SCSI controllers.
- *
- * Due to a DPT BIOS "feature", it might not be possible to force an EISA
- * address on more than a single DPT PCI board, so in this case you have to
- * let the PCI BIOS assign the addresses.
- *
- * The sequence of detection probes is:
- *
- * - ISA 0x1F0;
- * - PCI SCSI controllers (only if BIOS32 is available);
- * - EISA/PCI 0x1C88 through 0xFC88 (corresponding to EISA slots 1 to 15);
- * - ISA 0x170, 0x230, 0x330.
- *
- * The above list of detection probes can be totally replaced by the
- * boot command line option: "eata=port0,port1,port2,...", where the
- * port0, port1... arguments are ISA/EISA/PCI addresses to be probed.
- * For example using "eata=0x7410,0x7450,0x230", the driver probes
- * only the two PCI addresses 0x7410 and 0x7450 and the ISA address 0x230,
- * in this order; "eata=0" totally disables this driver.
- *
- * After the optional list of detection probes, other possible command line
- * options are:
- *
- * et:y force use of extended translation (255 heads, 63 sectors);
- * et:n use disk geometry detected by scsicam_bios_param;
- * rs:y reverse scan order while detecting PCI boards;
- * rs:n use BIOS order while detecting PCI boards;
- * lc:y enables linked commands;
- * lc:n disables linked commands;
- * tm:0 disables tagged commands (same as tc:n);
- * tm:1 use simple queue tags (same as tc:y);
- * tm:2 use ordered queue tags (same as tc:2);
- * mq:xx set the max queue depth to the value xx (2 <= xx <= 32).
- *
- * The default value is: "eata=lc:n,mq:16,tm:0,et:n,rs:n".
- * An example using the list of detection probes could be:
- * "eata=0x7410,0x230,lc:y,tm:2,mq:4,et:n".
- *
- * When loading as a module, parameters can be specified as well.
- * The above example would be (use 1 in place of y and 0 in place of n):
- *
- * modprobe eata io_port=0x7410,0x230 linked_comm=1 \
- * max_queue_depth=4 ext_tran=0 tag_mode=2 \
- * rev_scan=1
- *
- * ----------------------------------------------------------------------------
- * In this implementation, linked commands are designed to work with any DISK
- * or CD-ROM, since this linking has only the intent of clustering (time-wise)
- * and reordering by elevator sorting commands directed to each device,
- * without any relation with the actual SCSI protocol between the controller
- * and the device.
- * If Q is the queue depth reported at boot time for each device (also named
- * cmds/lun) and Q > 2, whenever there is already an active command to the
- * device all other commands to the same device (up to Q-1) are kept waiting
- * in the elevator sorting queue. When the active command completes, the
- * commands in this queue are sorted by sector address. The sort is chosen
- * between increasing or decreasing by minimizing the seek distance between
- * the sector of the commands just completed and the sector of the first
- * command in the list to be sorted.
- * Trivial math assures that the unsorted average seek distance when doing
- * random seeks over S sectors is S/3.
- * When (Q-1) requests are uniformly distributed over S sectors, the average
- * distance between two adjacent requests is S/((Q-1) + 1), so the sorted
- * average seek distance for (Q-1) random requests over S sectors is S/Q.
- * The elevator sorting hence divides the seek distance by a factor Q/3.
- * The above pure geometric remarks are valid in all cases and the
- * driver effectively reduces the seek distance by the predicted factor
- * when there are Q concurrent read i/o operations on the device, but this
- * does not necessarily results in a noticeable performance improvement:
- * your mileage may vary....
- *
- * Note: command reordering inside a batch of queued commands could cause
- * wrong results only if there is at least one write request and the
- * intersection (sector-wise) of all requests is not empty.
- * When the driver detects a batch including overlapping requests
- * (a really rare event) strict serial (pid) order is enforced.
- * ----------------------------------------------------------------------------
- * The extended translation option (et:y) is useful when using large physical
- * disks/arrays. It could also be useful when switching between Adaptec boards
- * and DPT boards without reformatting the disk.
- * When a boot disk is partitioned with extended translation, in order to
- * be able to boot it with a DPT board is could be necessary to add to
- * lilo.conf additional commands as in the following example:
- *
- * fix-table
- * disk=/dev/sda bios=0x80 sectors=63 heads=128 cylindres=546
- *
- * where the above geometry should be replaced with the one reported at
- * power up by the DPT controller.
- * ----------------------------------------------------------------------------
- *
- * The boards are named EATA0, EATA1,... according to the detection order.
- *
- * In order to support multiple ISA boards in a reliable way,
- * the driver sets host->wish_block = 1 for all ISA boards.
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/stat.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <asm/byteorder.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsicam.h>
-
-static int eata2x_detect(struct scsi_host_template *);
-static int eata2x_release(struct Scsi_Host *);
-static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-static int eata2x_eh_abort(struct scsi_cmnd *);
-static int eata2x_eh_host_reset(struct scsi_cmnd *);
-static int eata2x_bios_param(struct scsi_device *, struct block_device *,
- sector_t, int *);
-static int eata2x_slave_configure(struct scsi_device *);
-
-static struct scsi_host_template driver_template = {
- .name = "EATA/DMA 2.0x rev. 8.10.00 ",
- .detect = eata2x_detect,
- .release = eata2x_release,
- .queuecommand = eata2x_queuecommand,
- .eh_abort_handler = eata2x_eh_abort,
- .eh_host_reset_handler = eata2x_eh_host_reset,
- .bios_param = eata2x_bios_param,
- .slave_configure = eata2x_slave_configure,
- .this_id = 7,
- .unchecked_isa_dma = 1,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-#if !defined(__BIG_ENDIAN_BITFIELD) && !defined(__LITTLE_ENDIAN_BITFIELD)
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
-
-/* Subversion values */
-#define ISA 0
-#define ESA 1
-
-#undef FORCE_CONFIG
-
-#undef DEBUG_LINKED_COMMANDS
-#undef DEBUG_DETECT
-#undef DEBUG_PCI_DETECT
-#undef DEBUG_INTERRUPT
-#undef DEBUG_RESET
-#undef DEBUG_GENERATE_ERRORS
-#undef DEBUG_GENERATE_ABORTS
-#undef DEBUG_GEOMETRY
-
-#define MAX_ISA 4
-#define MAX_VESA 0
-#define MAX_EISA 15
-#define MAX_PCI 16
-#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
-#define MAX_CHANNEL 4
-#define MAX_LUN 32
-#define MAX_TARGET 32
-#define MAX_MAILBOXES 64
-#define MAX_SGLIST 64
-#define MAX_LARGE_SGLIST 122
-#define MAX_INTERNAL_RETRIES 64
-#define MAX_CMD_PER_LUN 2
-#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
-
-#define SKIP ULONG_MAX
-#define FREE 0
-#define IN_USE 1
-#define LOCKED 2
-#define IN_RESET 3
-#define IGNORE 4
-#define READY 5
-#define ABORTING 6
-#define NO_DMA 0xff
-#define MAXLOOP 10000
-#define TAG_DISABLED 0
-#define TAG_SIMPLE 1
-#define TAG_ORDERED 2
-
-#define REG_CMD 7
-#define REG_STATUS 7
-#define REG_AUX_STATUS 8
-#define REG_DATA 0
-#define REG_DATA2 1
-#define REG_SEE 6
-#define REG_LOW 2
-#define REG_LM 3
-#define REG_MID 4
-#define REG_MSB 5
-#define REGION_SIZE 9UL
-#define MAX_ISA_ADDR 0x03ff
-#define MIN_EISA_ADDR 0x1c88
-#define MAX_EISA_ADDR 0xfc88
-#define BSY_ASSERTED 0x80
-#define DRQ_ASSERTED 0x08
-#define ABSY_ASSERTED 0x01
-#define IRQ_ASSERTED 0x02
-#define READ_CONFIG_PIO 0xf0
-#define SET_CONFIG_PIO 0xf1
-#define SEND_CP_PIO 0xf2
-#define RECEIVE_SP_PIO 0xf3
-#define TRUNCATE_XFR_PIO 0xf4
-#define RESET_PIO 0xf9
-#define READ_CONFIG_DMA 0xfd
-#define SET_CONFIG_DMA 0xfe
-#define SEND_CP_DMA 0xff
-#define ASOK 0x00
-#define ASST 0x01
-
-#define YESNO(a) ((a) ? 'y' : 'n')
-#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
-
-/* "EATA", in Big Endian format */
-#define EATA_SIG_BE 0x45415441
-
-/* Number of valid bytes in the board config structure for EATA 2.0x */
-#define EATA_2_0A_SIZE 28
-#define EATA_2_0B_SIZE 30
-#define EATA_2_0C_SIZE 34
-
-/* Board info structure */
-struct eata_info {
- u_int32_t data_len; /* Number of valid bytes after this field */
- u_int32_t sign; /* ASCII "EATA" signature */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar version : 4,
- : 4;
- unchar haaval : 1,
- ata : 1,
- drqvld : 1,
- dmasup : 1,
- morsup : 1,
- trnxfr : 1,
- tarsup : 1,
- ocsena : 1;
-#else
- unchar : 4, /* unused low nibble */
- version : 4; /* EATA version, should be 0x1 */
- unchar ocsena : 1, /* Overlap Command Support Enabled */
- tarsup : 1, /* Target Mode Supported */
- trnxfr : 1, /* Truncate Transfer Cmd NOT Necessary */
- morsup : 1, /* More Supported */
- dmasup : 1, /* DMA Supported */
- drqvld : 1, /* DRQ Index (DRQX) is valid */
- ata : 1, /* This is an ATA device */
- haaval : 1; /* Host Adapter Address Valid */
-#endif
-
- ushort cp_pad_len; /* Number of pad bytes after cp_len */
- unchar host_addr[4]; /* Host Adapter SCSI ID for channels 3, 2, 1, 0 */
- u_int32_t cp_len; /* Number of valid bytes in cp */
- u_int32_t sp_len; /* Number of valid bytes in sp */
- ushort queue_size; /* Max number of cp that can be queued */
- ushort unused;
- ushort scatt_size; /* Max number of entries in scatter/gather table */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar drqx : 2,
- second : 1,
- irq_tr : 1,
- irq : 4;
- unchar sync;
- unchar : 4,
- res1 : 1,
- large_sg : 1,
- forcaddr : 1,
- isaena : 1;
- unchar max_chan : 3,
- max_id : 5;
- unchar max_lun;
- unchar eisa : 1,
- pci : 1,
- idquest : 1,
- m1 : 1,
- : 4;
-#else
- unchar irq : 4, /* Interrupt Request assigned to this controller */
- irq_tr : 1, /* 0 for edge triggered, 1 for level triggered */
- second : 1, /* 1 if this is a secondary (not primary) controller */
- drqx : 2; /* DRQ Index (0=DMA0, 1=DMA7, 2=DMA6, 3=DMA5) */
- unchar sync; /* 1 if scsi target id 7...0 is running sync scsi */
-
- /* Structure extension defined in EATA 2.0B */
- unchar isaena : 1, /* ISA i/o addressing is disabled/enabled */
- forcaddr : 1, /* Port address has been forced */
- large_sg : 1, /* 1 if large SG lists are supported */
- res1 : 1,
- : 4;
- unchar max_id : 5, /* Max SCSI target ID number */
- max_chan : 3; /* Max SCSI channel number on this board */
-
- /* Structure extension defined in EATA 2.0C */
- unchar max_lun; /* Max SCSI LUN number */
- unchar
- : 4,
- m1 : 1, /* This is a PCI with an M1 chip installed */
- idquest : 1, /* RAIDNUM returned is questionable */
- pci : 1, /* This board is PCI */
- eisa : 1; /* This board is EISA */
-#endif
-
- unchar raidnum; /* Uniquely identifies this HBA in a system */
- unchar notused;
-
- ushort ipad[247];
-};
-
-/* Board config structure */
-struct eata_config {
- ushort len; /* Number of bytes following this field */
-
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar : 4,
- tarena : 1,
- mdpena : 1,
- ocena : 1,
- edis : 1;
-#else
- unchar edis : 1, /* Disable EATA interface after config command */
- ocena : 1, /* Overlapped Commands Enabled */
- mdpena : 1, /* Transfer all Modified Data Pointer Messages */
- tarena : 1, /* Target Mode Enabled for this controller */
- : 4;
-#endif
- unchar cpad[511];
-};
-
-/* Returned status packet structure */
-struct mssp {
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar eoc : 1,
- adapter_status : 7;
-#else
- unchar adapter_status : 7, /* State related to current command */
- eoc : 1; /* End Of Command (1 = command completed) */
-#endif
- unchar target_status; /* SCSI status received after data transfer */
- unchar unused[2];
- u_int32_t inv_res_len; /* Number of bytes not transferred */
- u_int32_t cpp_index; /* Index of address set in cp */
- char mess[12];
-};
-
-struct sg_list {
- unsigned int address; /* Segment Address */
- unsigned int num_bytes; /* Segment Length */
-};
-
-/* MailBox SCSI Command Packet */
-struct mscp {
-#if defined(__BIG_ENDIAN_BITFIELD)
- unchar din : 1,
- dout : 1,
- interp : 1,
- : 1,
- sg : 1,
- reqsen :1,
- init : 1,
- sreset : 1;
- unchar sense_len;
- unchar unused[3];
- unchar : 7,
- fwnest : 1;
- unchar : 5,
- hbaci : 1,
- iat : 1,
- phsunit : 1;
- unchar channel : 3,
- target : 5;
- unchar one : 1,
- dispri : 1,
- luntar : 1,
- lun : 5;
-#else
- unchar sreset :1, /* SCSI Bus Reset Signal should be asserted */
- init :1, /* Re-initialize controller and self test */
- reqsen :1, /* Transfer Request Sense Data to addr using DMA */
- sg :1, /* Use Scatter/Gather */
- :1,
- interp :1, /* The controller interprets cp, not the target */
- dout :1, /* Direction of Transfer is Out (Host to Target) */
- din :1; /* Direction of Transfer is In (Target to Host) */
- unchar sense_len; /* Request Sense Length */
- unchar unused[3];
- unchar fwnest : 1, /* Send command to a component of an Array Group */
- : 7;
- unchar phsunit : 1, /* Send to Target Physical Unit (bypass RAID) */
- iat : 1, /* Inhibit Address Translation */
- hbaci : 1, /* Inhibit HBA Caching for this command */
- : 5;
- unchar target : 5, /* SCSI target ID */
- channel : 3; /* SCSI channel number */
- unchar lun : 5, /* SCSI logical unit number */
- luntar : 1, /* This cp is for Target (not LUN) */
- dispri : 1, /* Disconnect Privilege granted */
- one : 1; /* 1 */
-#endif
-
- unchar mess[3]; /* Massage to/from Target */
- unchar cdb[12]; /* Command Descriptor Block */
- u_int32_t data_len; /* If sg=0 Data Length, if sg=1 sglist length */
- u_int32_t cpp_index; /* Index of address to be returned in sp */
- u_int32_t data_address; /* If sg=0 Data Address, if sg=1 sglist address */
- u_int32_t sp_dma_addr; /* Address where sp is DMA'ed when cp completes */
- u_int32_t sense_addr; /* Address where Sense Data is DMA'ed on error */
-
- /* Additional fields begin here. */
- struct scsi_cmnd *SCpnt;
-
- /* All the cp structure is zero filled by queuecommand except the
- following CP_TAIL_SIZE bytes, initialized by detect */
- dma_addr_t cp_dma_addr; /* dma handle for this cp structure */
- struct sg_list *sglist; /* pointer to the allocated SG list */
-};
-
-#define CP_TAIL_SIZE (sizeof(struct sglist *) + sizeof(dma_addr_t))
-
-struct hostdata {
- struct mscp cp[MAX_MAILBOXES]; /* Mailboxes for this board */
- unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
- unsigned int last_cp_used; /* Index of last mailbox used */
- unsigned int iocount; /* Total i/o done for this board */
- int board_number; /* Number of this board */
- char board_name[16]; /* Name of this board */
- int in_reset; /* True if board is doing a reset */
- int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
- int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If 1 redo i/o on target */
- unsigned int retries; /* Number of internal retries */
- unsigned long last_retried_pid; /* Pid of last retried command */
- unsigned char subversion; /* Bus type, either ISA or EISA/PCI */
- unsigned char protocol_rev; /* EATA 2.0 rev., 'A' or 'B' or 'C' */
- unsigned char is_pci; /* 1 is bus type is PCI */
- struct pci_dev *pdev; /* pdev for PCI bus, NULL otherwise */
- struct mssp *sp_cpu_addr; /* cpu addr for DMA buffer sp */
- dma_addr_t sp_dma_addr; /* dma handle for DMA buffer sp */
- struct mssp sp; /* Local copy of sp buffer */
-};
-
-static struct Scsi_Host *sh[MAX_BOARDS];
-static const char *driver_name = "EATA";
-static char sha[MAX_BOARDS];
-
-/* Initialize num_boards so that ihdlr can work while detect is in progress */
-static unsigned int num_boards = MAX_BOARDS;
-
-static unsigned long io_port[] = {
-
- /* Space for MAX_INT_PARAM ports usable while loading as a module */
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
- SKIP, SKIP,
-
- /* First ISA */
- 0x1f0,
-
- /* Space for MAX_PCI ports possibly reported by PCI_BIOS */
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
- SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
-
- /* MAX_EISA ports */
- 0x1c88, 0x2c88, 0x3c88, 0x4c88, 0x5c88, 0x6c88, 0x7c88, 0x8c88,
- 0x9c88, 0xac88, 0xbc88, 0xcc88, 0xdc88, 0xec88, 0xfc88,
-
- /* Other (MAX_ISA - 1) ports */
- 0x170, 0x230, 0x330,
-
- /* End of list */
- 0x0
-};
-
-/* Device is Big Endian */
-#define H2DEV(x) cpu_to_be32(x)
-#define DEV2H(x) be32_to_cpu(x)
-#define H2DEV16(x) cpu_to_be16(x)
-#define DEV2H16(x) be16_to_cpu(x)
-
-/* But transfer orientation from the 16 bit data register is Little Endian */
-#define REG2H(x) le16_to_cpu(x)
-
-static irqreturn_t do_interrupt_handler(int, void *);
-static void flush_dev(struct scsi_device *, unsigned long, struct hostdata *,
- unsigned int);
-static int do_trace = 0;
-static int setup_done = 0;
-static int link_statistics;
-static int ext_tran = 0;
-static int rev_scan = 1;
-
-#if defined(CONFIG_SCSI_EATA_TAGGED_QUEUE)
-static int tag_mode = TAG_SIMPLE;
-#else
-static int tag_mode = TAG_DISABLED;
-#endif
-
-#if defined(CONFIG_SCSI_EATA_LINKED_COMMANDS)
-static int linked_comm = 1;
-#else
-static int linked_comm = 0;
-#endif
-
-#if defined(CONFIG_SCSI_EATA_MAX_TAGS)
-static int max_queue_depth = CONFIG_SCSI_EATA_MAX_TAGS;
-#else
-static int max_queue_depth = MAX_CMD_PER_LUN;
-#endif
-
-#if defined(CONFIG_ISA)
-static int isa_probe = 1;
-#else
-static int isa_probe = 0;
-#endif
-
-#if defined(CONFIG_EISA)
-static int eisa_probe = 1;
-#else
-static int eisa_probe = 0;
-#endif
-
-#if defined(CONFIG_PCI)
-static int pci_probe = 1;
-#else
-static int pci_probe = 0;
-#endif
-
-#define MAX_INT_PARAM 10
-#define MAX_BOOT_OPTIONS_SIZE 256
-static char boot_options[MAX_BOOT_OPTIONS_SIZE];
-
-#if defined(MODULE)
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-module_param_string(eata, boot_options, MAX_BOOT_OPTIONS_SIZE, 0);
-MODULE_PARM_DESC(eata, " equivalent to the \"eata=...\" kernel boot option."
- " Example: modprobe eata \"eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n\"");
-MODULE_AUTHOR("Dario Ballabio");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EATA/DMA SCSI Driver");
-
-#endif
-
-static int eata2x_slave_configure(struct scsi_device *dev)
-{
- int tqd, utqd;
- char *tag_suffix, *link_suffix;
-
- utqd = MAX_CMD_PER_LUN;
- tqd = max_queue_depth;
-
- if (TLDEV(dev->type) && dev->tagged_supported) {
- if (tag_mode == TAG_SIMPLE) {
- tag_suffix = ", simple tags";
- } else if (tag_mode == TAG_ORDERED) {
- tag_suffix = ", ordered tags";
- } else {
- tag_suffix = ", no tags";
- }
- scsi_change_queue_depth(dev, tqd);
- } else if (TLDEV(dev->type) && linked_comm) {
- scsi_change_queue_depth(dev, tqd);
- tag_suffix = ", untagged";
- } else {
- scsi_change_queue_depth(dev, utqd);
- tag_suffix = "";
- }
-
- if (TLDEV(dev->type) && linked_comm && dev->queue_depth > 2)
- link_suffix = ", sorted";
- else if (TLDEV(dev->type))
- link_suffix = ", unsorted";
- else
- link_suffix = "";
-
- sdev_printk(KERN_INFO, dev,
- "cmds/lun %d%s%s.\n",
- dev->queue_depth, link_suffix, tag_suffix);
-
- return 0;
-}
-
-static int wait_on_busy(unsigned long iobase, unsigned int loop)
-{
- while (inb(iobase + REG_AUX_STATUS) & ABSY_ASSERTED) {
- udelay(1L);
- if (--loop == 0)
- return 1;
- }
- return 0;
-}
-
-static int do_dma(unsigned long iobase, unsigned long addr, unchar cmd)
-{
- unsigned char *byaddr;
- unsigned long devaddr;
-
- if (wait_on_busy(iobase, (addr ? MAXLOOP * 100 : MAXLOOP)))
- return 1;
-
- if (addr) {
- devaddr = H2DEV(addr);
- byaddr = (unsigned char *)&devaddr;
- outb(byaddr[3], iobase + REG_LOW);
- outb(byaddr[2], iobase + REG_LM);
- outb(byaddr[1], iobase + REG_MID);
- outb(byaddr[0], iobase + REG_MSB);
- }
-
- outb(cmd, iobase + REG_CMD);
- return 0;
-}
-
-static int read_pio(unsigned long iobase, ushort * start, ushort * end)
-{
- unsigned int loop = MAXLOOP;
- ushort *p;
-
- for (p = start; p <= end; p++) {
- while (!(inb(iobase + REG_STATUS) & DRQ_ASSERTED)) {
- udelay(1L);
- if (--loop == 0)
- return 1;
- }
- loop = MAXLOOP;
- *p = REG2H(inw(iobase));
- }
-
- return 0;
-}
-
-static struct pci_dev *get_pci_dev(unsigned long port_base)
-{
-#if defined(CONFIG_PCI)
- unsigned int addr;
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
- addr = pci_resource_start(dev, 0);
-
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: get_pci_dev, bus %d, devfn 0x%x, addr 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn, addr);
-#endif
-
- /* we are in so much trouble for a pci hotplug system with this driver
- * anyway, so doing this at least lets people unload the driver and not
- * cause memory problems, but in general this is a bad thing to do (this
- * driver needs to be converted to the proper PCI api someday... */
- pci_dev_put(dev);
- if (addr + PCI_BASE_ADDRESS_0 == port_base)
- return dev;
- }
-#endif /* end CONFIG_PCI */
- return NULL;
-}
-
-static void enable_pci_ports(void)
-{
-#if defined(CONFIG_PCI)
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: enable_pci_ports, bus %d, devfn 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn);
-#endif
-
- if (pci_enable_device(dev))
- printk
- ("%s: warning, pci_enable_device failed, bus %d devfn 0x%x.\n",
- driver_name, dev->bus->number, dev->devfn);
- }
-
-#endif /* end CONFIG_PCI */
-}
-
-static int port_detect(unsigned long port_base, unsigned int j,
- struct scsi_host_template *tpnt)
-{
- unsigned char irq, dma_channel, subversion, i, is_pci = 0;
- unsigned char protocol_rev;
- struct eata_info info;
- char *bus_type, dma_name[16];
- struct pci_dev *pdev;
- /* Allowed DMA channels for ISA (0 indicates reserved) */
- unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
- struct Scsi_Host *shost;
- struct hostdata *ha;
- char name[16];
-
- sprintf(name, "%s%d", driver_name, j);
-
- if (!request_region(port_base, REGION_SIZE, driver_name)) {
-#if defined(DEBUG_DETECT)
- printk("%s: address 0x%03lx in use, skipping probe.\n", name,
- port_base);
-#endif
- goto fail;
- }
-
- if (do_dma(port_base, 0, READ_CONFIG_PIO)) {
-#if defined(DEBUG_DETECT)
- printk("%s: detect, do_dma failed at 0x%03lx.\n", name,
- port_base);
-#endif
- goto freelock;
- }
-
- /* Read the info structure */
- if (read_pio(port_base, (ushort *) & info, (ushort *) & info.ipad[0])) {
-#if defined(DEBUG_DETECT)
- printk("%s: detect, read_pio failed at 0x%03lx.\n", name,
- port_base);
-#endif
- goto freelock;
- }
-
- info.data_len = DEV2H(info.data_len);
- info.sign = DEV2H(info.sign);
- info.cp_pad_len = DEV2H16(info.cp_pad_len);
- info.cp_len = DEV2H(info.cp_len);
- info.sp_len = DEV2H(info.sp_len);
- info.scatt_size = DEV2H16(info.scatt_size);
- info.queue_size = DEV2H16(info.queue_size);
-
- /* Check the controller "EATA" signature */
- if (info.sign != EATA_SIG_BE) {
-#if defined(DEBUG_DETECT)
- printk("%s: signature 0x%04x discarded.\n", name, info.sign);
-#endif
- goto freelock;
- }
-
- if (info.data_len < EATA_2_0A_SIZE) {
- printk
- ("%s: config structure size (%d bytes) too short, detaching.\n",
- name, info.data_len);
- goto freelock;
- } else if (info.data_len == EATA_2_0A_SIZE)
- protocol_rev = 'A';
- else if (info.data_len == EATA_2_0B_SIZE)
- protocol_rev = 'B';
- else
- protocol_rev = 'C';
-
- if (protocol_rev != 'A' && info.forcaddr) {
- printk("%s: warning, port address has been forced.\n", name);
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else if (port_base > MAX_EISA_ADDR
- || (protocol_rev == 'C' && info.pci)) {
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else if (port_base >= MIN_EISA_ADDR
- || (protocol_rev == 'C' && info.eisa)) {
- bus_type = "EISA";
- subversion = ESA;
- } else if (protocol_rev == 'C' && !info.eisa && !info.pci) {
- bus_type = "ISA";
- subversion = ISA;
- } else if (port_base > MAX_ISA_ADDR) {
- bus_type = "PCI";
- is_pci = 1;
- subversion = ESA;
- } else {
- bus_type = "ISA";
- subversion = ISA;
- }
-
- if (!info.haaval || info.ata) {
- printk
- ("%s: address 0x%03lx, unusable %s board (%d%d), detaching.\n",
- name, port_base, bus_type, info.haaval, info.ata);
- goto freelock;
- }
-
- if (info.drqvld) {
- if (subversion == ESA)
- printk("%s: warning, weird %s board using DMA.\n", name,
- bus_type);
-
- subversion = ISA;
- dma_channel = dma_channel_table[3 - info.drqx];
- } else {
- if (subversion == ISA)
- printk("%s: warning, weird %s board not using DMA.\n",
- name, bus_type);
-
- subversion = ESA;
- dma_channel = NO_DMA;
- }
-
- if (!info.dmasup)
- printk("%s: warning, DMA protocol support not asserted.\n",
- name);
-
- irq = info.irq;
-
- if (subversion == ESA && !info.irq_tr)
- printk
- ("%s: warning, LEVEL triggering is suggested for IRQ %u.\n",
- name, irq);
-
- if (is_pci) {
- pdev = get_pci_dev(port_base);
- if (!pdev)
- printk
- ("%s: warning, failed to get pci_dev structure.\n",
- name);
- } else
- pdev = NULL;
-
- if (pdev && (irq != pdev->irq)) {
- printk("%s: IRQ %u mapped to IO-APIC IRQ %u.\n", name, irq,
- pdev->irq);
- irq = pdev->irq;
- }
-
- /* Board detected, allocate its IRQ */
- if (request_irq(irq, do_interrupt_handler,
- (subversion == ESA) ? IRQF_SHARED : 0,
- driver_name, (void *)&sha[j])) {
- printk("%s: unable to allocate IRQ %u, detaching.\n", name,
- irq);
- goto freelock;
- }
-
- if (subversion == ISA && request_dma(dma_channel, driver_name)) {
- printk("%s: unable to allocate DMA channel %u, detaching.\n",
- name, dma_channel);
- goto freeirq;
- }
-#if defined(FORCE_CONFIG)
- {
- struct eata_config *cf;
- dma_addr_t cf_dma_addr;
-
- cf = pci_zalloc_consistent(pdev, sizeof(struct eata_config),
- &cf_dma_addr);
-
- if (!cf) {
- printk
- ("%s: config, pci_alloc_consistent failed, detaching.\n",
- name);
- goto freedma;
- }
-
- /* Set board configuration */
- cf->len = (ushort) H2DEV16((ushort) 510);
- cf->ocena = 1;
-
- if (do_dma(port_base, cf_dma_addr, SET_CONFIG_DMA)) {
- printk
- ("%s: busy timeout sending configuration, detaching.\n",
- name);
- pci_free_consistent(pdev, sizeof(struct eata_config),
- cf, cf_dma_addr);
- goto freedma;
- }
-
- }
-#endif
-
- sh[j] = shost = scsi_register(tpnt, sizeof(struct hostdata));
- if (shost == NULL) {
- printk("%s: unable to register host, detaching.\n", name);
- goto freedma;
- }
-
- shost->io_port = port_base;
- shost->unique_id = port_base;
- shost->n_io_port = REGION_SIZE;
- shost->dma_channel = dma_channel;
- shost->irq = irq;
- shost->sg_tablesize = (ushort) info.scatt_size;
- shost->this_id = (ushort) info.host_addr[3];
- shost->can_queue = (ushort) info.queue_size;
- shost->cmd_per_lun = MAX_CMD_PER_LUN;
-
- ha = (struct hostdata *)shost->hostdata;
-
- memset(ha, 0, sizeof(struct hostdata));
- ha->subversion = subversion;
- ha->protocol_rev = protocol_rev;
- ha->is_pci = is_pci;
- ha->pdev = pdev;
- ha->board_number = j;
-
- if (ha->subversion == ESA)
- shost->unchecked_isa_dma = 0;
- else {
- unsigned long flags;
- shost->unchecked_isa_dma = 1;
-
- flags = claim_dma_lock();
- disable_dma(dma_channel);
- clear_dma_ff(dma_channel);
- set_dma_mode(dma_channel, DMA_MODE_CASCADE);
- enable_dma(dma_channel);
- release_dma_lock(flags);
-
- }
-
- strcpy(ha->board_name, name);
-
- /* DPT PM2012 does not allow to detect sg_tablesize correctly */
- if (shost->sg_tablesize > MAX_SGLIST || shost->sg_tablesize < 2) {
- printk("%s: detect, wrong n. of SG lists %d, fixed.\n",
- ha->board_name, shost->sg_tablesize);
- shost->sg_tablesize = MAX_SGLIST;
- }
-
- /* DPT PM2012 does not allow to detect can_queue correctly */
- if (shost->can_queue > MAX_MAILBOXES || shost->can_queue < 2) {
- printk("%s: detect, wrong n. of mbox %d, fixed.\n",
- ha->board_name, shost->can_queue);
- shost->can_queue = MAX_MAILBOXES;
- }
-
- if (protocol_rev != 'A') {
- if (info.max_chan > 0 && info.max_chan < MAX_CHANNEL)
- shost->max_channel = info.max_chan;
-
- if (info.max_id > 7 && info.max_id < MAX_TARGET)
- shost->max_id = info.max_id + 1;
-
- if (info.large_sg && shost->sg_tablesize == MAX_SGLIST)
- shost->sg_tablesize = MAX_LARGE_SGLIST;
- }
-
- if (protocol_rev == 'C') {
- if (info.max_lun > 7 && info.max_lun < MAX_LUN)
- shost->max_lun = info.max_lun + 1;
- }
-
- if (dma_channel == NO_DMA)
- sprintf(dma_name, "%s", "BMST");
- else
- sprintf(dma_name, "DMA %u", dma_channel);
-
- for (i = 0; i < shost->can_queue; i++)
- ha->cp[i].cp_dma_addr = pci_map_single(ha->pdev,
- &ha->cp[i],
- sizeof(struct mscp),
- PCI_DMA_BIDIRECTIONAL);
-
- for (i = 0; i < shost->can_queue; i++) {
- size_t sz = shost->sg_tablesize *sizeof(struct sg_list);
- gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC;
- ha->cp[i].sglist = kmalloc(sz, gfp_mask);
- if (!ha->cp[i].sglist) {
- printk
- ("%s: kmalloc SGlist failed, mbox %d, detaching.\n",
- ha->board_name, i);
- goto release;
- }
- }
-
- if (!(ha->sp_cpu_addr = pci_alloc_consistent(ha->pdev,
- sizeof(struct mssp),
- &ha->sp_dma_addr))) {
- printk("%s: pci_alloc_consistent failed, detaching.\n", ha->board_name);
- goto release;
- }
-
- if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
- max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
-
- if (max_queue_depth < MAX_CMD_PER_LUN)
- max_queue_depth = MAX_CMD_PER_LUN;
-
- if (tag_mode != TAG_DISABLED && tag_mode != TAG_SIMPLE)
- tag_mode = TAG_ORDERED;
-
- if (j == 0) {
- printk
- ("EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.\n");
- printk
- ("%s config options -> tm:%d, lc:%c, mq:%d, rs:%c, et:%c, "
- "ip:%c, ep:%c, pp:%c.\n", driver_name, tag_mode,
- YESNO(linked_comm), max_queue_depth, YESNO(rev_scan),
- YESNO(ext_tran), YESNO(isa_probe), YESNO(eisa_probe),
- YESNO(pci_probe));
- }
-
- printk("%s: 2.0%c, %s 0x%03lx, IRQ %u, %s, SG %d, MB %d.\n",
- ha->board_name, ha->protocol_rev, bus_type,
- (unsigned long)shost->io_port, shost->irq, dma_name,
- shost->sg_tablesize, shost->can_queue);
-
- if (shost->max_id > 8 || shost->max_lun > 8)
- printk
- ("%s: wide SCSI support enabled, max_id %u, max_lun %llu.\n",
- ha->board_name, shost->max_id, shost->max_lun);
-
- for (i = 0; i <= shost->max_channel; i++)
- printk("%s: SCSI channel %u enabled, host target ID %d.\n",
- ha->board_name, i, info.host_addr[3 - i]);
-
-#if defined(DEBUG_DETECT)
- printk("%s: Vers. 0x%x, ocs %u, tar %u, trnxfr %u, more %u, SYNC 0x%x, "
- "sec. %u, infol %d, cpl %d spl %d.\n", name, info.version,
- info.ocsena, info.tarsup, info.trnxfr, info.morsup, info.sync,
- info.second, info.data_len, info.cp_len, info.sp_len);
-
- if (protocol_rev == 'B' || protocol_rev == 'C')
- printk("%s: isaena %u, forcaddr %u, max_id %u, max_chan %u, "
- "large_sg %u, res1 %u.\n", name, info.isaena,
- info.forcaddr, info.max_id, info.max_chan, info.large_sg,
- info.res1);
-
- if (protocol_rev == 'C')
- printk("%s: max_lun %u, m1 %u, idquest %u, pci %u, eisa %u, "
- "raidnum %u.\n", name, info.max_lun, info.m1,
- info.idquest, info.pci, info.eisa, info.raidnum);
-#endif
-
- if (ha->pdev) {
- pci_set_master(ha->pdev);
- if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32)))
- printk("%s: warning, pci_set_dma_mask failed.\n",
- ha->board_name);
- }
-
- return 1;
-
- freedma:
- if (subversion == ISA)
- free_dma(dma_channel);
- freeirq:
- free_irq(irq, &sha[j]);
- freelock:
- release_region(port_base, REGION_SIZE);
- fail:
- return 0;
-
- release:
- eata2x_release(shost);
- return 0;
-}
-
-static void internal_setup(char *str, int *ints)
-{
- int i, argc = ints[0];
- char *cur = str, *pc;
-
- if (argc > 0) {
- if (argc > MAX_INT_PARAM)
- argc = MAX_INT_PARAM;
-
- for (i = 0; i < argc; i++)
- io_port[i] = ints[i + 1];
-
- io_port[i] = 0;
- setup_done = 1;
- }
-
- while (cur && (pc = strchr(cur, ':'))) {
- int val = 0, c = *++pc;
-
- if (c == 'n' || c == 'N')
- val = 0;
- else if (c == 'y' || c == 'Y')
- val = 1;
- else
- val = (int)simple_strtoul(pc, NULL, 0);
-
- if (!strncmp(cur, "lc:", 3))
- linked_comm = val;
- else if (!strncmp(cur, "tm:", 3))
- tag_mode = val;
- else if (!strncmp(cur, "tc:", 3))
- tag_mode = val;
- else if (!strncmp(cur, "mq:", 3))
- max_queue_depth = val;
- else if (!strncmp(cur, "ls:", 3))
- link_statistics = val;
- else if (!strncmp(cur, "et:", 3))
- ext_tran = val;
- else if (!strncmp(cur, "rs:", 3))
- rev_scan = val;
- else if (!strncmp(cur, "ip:", 3))
- isa_probe = val;
- else if (!strncmp(cur, "ep:", 3))
- eisa_probe = val;
- else if (!strncmp(cur, "pp:", 3))
- pci_probe = val;
-
- if ((cur = strchr(cur, ',')))
- ++cur;
- }
-
- return;
-}
-
-static int option_setup(char *str)
-{
- int ints[MAX_INT_PARAM];
- char *cur = str;
- int i = 1;
-
- while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
- ints[i++] = simple_strtoul(cur, NULL, 0);
-
- if ((cur = strchr(cur, ',')) != NULL)
- cur++;
- }
-
- ints[0] = i - 1;
- internal_setup(cur, ints);
- return 1;
-}
-
-static void add_pci_ports(void)
-{
-#if defined(CONFIG_PCI)
- unsigned int addr, k;
- struct pci_dev *dev = NULL;
-
- for (k = 0; k < MAX_PCI; k++) {
-
- if (!(dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev)))
- break;
-
- if (pci_enable_device(dev)) {
-#if defined(DEBUG_PCI_DETECT)
- printk
- ("%s: detect, bus %d, devfn 0x%x, pci_enable_device failed.\n",
- driver_name, dev->bus->number, dev->devfn);
-#endif
-
- continue;
- }
-
- addr = pci_resource_start(dev, 0);
-
-#if defined(DEBUG_PCI_DETECT)
- printk("%s: detect, seq. %d, bus %d, devfn 0x%x, addr 0x%x.\n",
- driver_name, k, dev->bus->number, dev->devfn, addr);
-#endif
-
- /* Order addresses according to rev_scan value */
- io_port[MAX_INT_PARAM + (rev_scan ? (MAX_PCI - k) : (1 + k))] =
- addr + PCI_BASE_ADDRESS_0;
- }
-
- pci_dev_put(dev);
-#endif /* end CONFIG_PCI */
-}
-
-static int eata2x_detect(struct scsi_host_template *tpnt)
-{
- unsigned int j = 0, k;
-
- tpnt->proc_name = "eata2x";
-
- if (strlen(boot_options))
- option_setup(boot_options);
-
-#if defined(MODULE)
- /* io_port could have been modified when loading as a module */
- if (io_port[0] != SKIP) {
- setup_done = 1;
- io_port[MAX_INT_PARAM] = 0;
- }
-#endif
-
- for (k = MAX_INT_PARAM; io_port[k]; k++)
- if (io_port[k] == SKIP)
- continue;
- else if (io_port[k] <= MAX_ISA_ADDR) {
- if (!isa_probe)
- io_port[k] = SKIP;
- } else if (io_port[k] >= MIN_EISA_ADDR
- && io_port[k] <= MAX_EISA_ADDR) {
- if (!eisa_probe)
- io_port[k] = SKIP;
- }
-
- if (pci_probe) {
- if (!setup_done)
- add_pci_ports();
- else
- enable_pci_ports();
- }
-
- for (k = 0; io_port[k]; k++) {
-
- if (io_port[k] == SKIP)
- continue;
-
- if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt))
- j++;
- }
-
- num_boards = j;
- return j;
-}
-
-static void map_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int k, pci_dir;
- int count;
- struct scatterlist *sg;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (SCpnt->sense_buffer)
- cpp->sense_addr =
- H2DEV(pci_map_single(ha->pdev, SCpnt->sense_buffer,
- SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE));
-
- cpp->sense_len = SCSI_SENSE_BUFFERSIZE;
-
- if (!scsi_sg_count(SCpnt)) {
- cpp->data_len = 0;
- return;
- }
-
- count = pci_map_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
- pci_dir);
- BUG_ON(!count);
-
- scsi_for_each_sg(SCpnt, sg, count, k) {
- cpp->sglist[k].address = H2DEV(sg_dma_address(sg));
- cpp->sglist[k].num_bytes = H2DEV(sg_dma_len(sg));
- }
-
- cpp->sg = 1;
- cpp->data_address = H2DEV(pci_map_single(ha->pdev, cpp->sglist,
- scsi_sg_count(SCpnt) *
- sizeof(struct sg_list),
- pci_dir));
- cpp->data_len = H2DEV((scsi_sg_count(SCpnt) * sizeof(struct sg_list)));
-}
-
-static void unmap_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int pci_dir;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (DEV2H(cpp->sense_addr))
- pci_unmap_single(ha->pdev, DEV2H(cpp->sense_addr),
- DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
-
- if (scsi_sg_count(SCpnt))
- pci_unmap_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
- pci_dir);
-
- if (!DEV2H(cpp->data_len))
- pci_dir = PCI_DMA_BIDIRECTIONAL;
-
- if (DEV2H(cpp->data_address))
- pci_unmap_single(ha->pdev, DEV2H(cpp->data_address),
- DEV2H(cpp->data_len), pci_dir);
-}
-
-static void sync_dma(unsigned int i, struct hostdata *ha)
-{
- unsigned int pci_dir;
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
- pci_dir = SCpnt->sc_data_direction;
-
- if (DEV2H(cpp->sense_addr))
- pci_dma_sync_single_for_cpu(ha->pdev, DEV2H(cpp->sense_addr),
- DEV2H(cpp->sense_len),
- PCI_DMA_FROMDEVICE);
-
- if (scsi_sg_count(SCpnt))
- pci_dma_sync_sg_for_cpu(ha->pdev, scsi_sglist(SCpnt),
- scsi_sg_count(SCpnt), pci_dir);
-
- if (!DEV2H(cpp->data_len))
- pci_dir = PCI_DMA_BIDIRECTIONAL;
-
- if (DEV2H(cpp->data_address))
- pci_dma_sync_single_for_cpu(ha->pdev,
- DEV2H(cpp->data_address),
- DEV2H(cpp->data_len), pci_dir);
-}
-
-static void scsi_to_dev_dir(unsigned int i, struct hostdata *ha)
-{
- unsigned int k;
-
- static const unsigned char data_out_cmds[] = {
- 0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
- 0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
- 0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b, 0x5d
- };
-
- static const unsigned char data_none_cmds[] = {
- 0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
- 0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
- 0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5, 0x00
- };
-
- struct mscp *cpp;
- struct scsi_cmnd *SCpnt;
-
- cpp = &ha->cp[i];
- SCpnt = cpp->SCpnt;
-
- if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
- cpp->din = 1;
- cpp->dout = 0;
- return;
- } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
- cpp->din = 0;
- cpp->dout = 1;
- return;
- } else if (SCpnt->sc_data_direction == DMA_NONE) {
- cpp->din = 0;
- cpp->dout = 0;
- return;
- }
-
- if (SCpnt->sc_data_direction != DMA_BIDIRECTIONAL)
- panic("%s: qcomm, invalid SCpnt->sc_data_direction.\n",
- ha->board_name);
-
- for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
- if (SCpnt->cmnd[0] == data_out_cmds[k]) {
- cpp->dout = 1;
- break;
- }
-
- if ((cpp->din = !cpp->dout))
- for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
- if (SCpnt->cmnd[0] == data_none_cmds[k]) {
- cpp->din = 0;
- break;
- }
-
-}
-
-static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
- void (*done) (struct scsi_cmnd *))
-{
- struct Scsi_Host *shost = SCpnt->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i, k;
- struct mscp *cpp;
-
- if (SCpnt->host_scribble)
- panic("%s: qcomm, SCpnt %p already active.\n",
- ha->board_name, SCpnt);
-
- /* i is the mailbox number, look for the first free mailbox
- starting from last_cp_used */
- i = ha->last_cp_used + 1;
-
- for (k = 0; k < shost->can_queue; k++, i++) {
- if (i >= shost->can_queue)
- i = 0;
- if (ha->cp_stat[i] == FREE) {
- ha->last_cp_used = i;
- break;
- }
- }
-
- if (k == shost->can_queue) {
- printk("%s: qcomm, no free mailbox.\n", ha->board_name);
- return 1;
- }
-
- /* Set pointer to control packet structure */
- cpp = &ha->cp[i];
-
- memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
-
- /* Set pointer to status packet structure, Big Endian format */
- cpp->sp_dma_addr = H2DEV(ha->sp_dma_addr);
-
- SCpnt->scsi_done = done;
- cpp->cpp_index = i;
- SCpnt->host_scribble = (unsigned char *)&cpp->cpp_index;
-
- if (do_trace)
- scmd_printk(KERN_INFO, SCpnt,
- "qcomm, mbox %d.\n", i);
-
- cpp->reqsen = 1;
- cpp->dispri = 1;
-#if 0
- if (SCpnt->device->type == TYPE_TAPE)
- cpp->hbaci = 1;
-#endif
- cpp->one = 1;
- cpp->channel = SCpnt->device->channel;
- cpp->target = SCpnt->device->id;
- cpp->lun = SCpnt->device->lun;
- cpp->SCpnt = SCpnt;
- memcpy(cpp->cdb, SCpnt->cmnd, SCpnt->cmd_len);
-
- /* Use data transfer direction SCpnt->sc_data_direction */
- scsi_to_dev_dir(i, ha);
-
- /* Map DMA buffers and SG list */
- map_dma(i, ha);
-
- if (linked_comm && SCpnt->device->queue_depth > 2
- && TLDEV(SCpnt->device->type)) {
- ha->cp_stat[i] = READY;
- flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
- return 0;
- }
-
- /* Send control packet to the board */
- if (do_dma(shost->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
- unmap_dma(i, ha);
- SCpnt->host_scribble = NULL;
- scmd_printk(KERN_INFO, SCpnt, "qcomm, adapter busy.\n");
- return 1;
- }
-
- ha->cp_stat[i] = IN_USE;
- return 0;
-}
-
-static DEF_SCSI_QCMD(eata2x_queuecommand)
-
-static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
-{
- struct Scsi_Host *shost = SCarg->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i;
-
- if (SCarg->host_scribble == NULL) {
- scmd_printk(KERN_INFO, SCarg, "abort, cmd inactive.\n");
- return SUCCESS;
- }
-
- i = *(unsigned int *)SCarg->host_scribble;
- scmd_printk(KERN_WARNING, SCarg, "abort, mbox %d.\n", i);
-
- if (i >= shost->can_queue)
- panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
-
- if (wait_on_busy(shost->io_port, MAXLOOP)) {
- printk("%s: abort, timeout error.\n", ha->board_name);
- return FAILED;
- }
-
- if (ha->cp_stat[i] == FREE) {
- printk("%s: abort, mbox %d is free.\n", ha->board_name, i);
- return SUCCESS;
- }
-
- if (ha->cp_stat[i] == IN_USE) {
- printk("%s: abort, mbox %d is in use.\n", ha->board_name, i);
-
- if (SCarg != ha->cp[i].SCpnt)
- panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
- ha->board_name, i, SCarg, ha->cp[i].SCpnt);
-
- if (inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED)
- printk("%s: abort, mbox %d, interrupt pending.\n",
- ha->board_name, i);
-
- return FAILED;
- }
-
- if (ha->cp_stat[i] == IN_RESET) {
- printk("%s: abort, mbox %d is in reset.\n", ha->board_name, i);
- return FAILED;
- }
-
- if (ha->cp_stat[i] == LOCKED) {
- printk("%s: abort, mbox %d is locked.\n", ha->board_name, i);
- return SUCCESS;
- }
-
- if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
- unmap_dma(i, ha);
- SCarg->result = DID_ABORT << 16;
- SCarg->host_scribble = NULL;
- ha->cp_stat[i] = FREE;
- printk("%s, abort, mbox %d ready, DID_ABORT, done.\n",
- ha->board_name, i);
- SCarg->scsi_done(SCarg);
- return SUCCESS;
- }
-
- panic("%s: abort, mbox %d, invalid cp_stat.\n", ha->board_name, i);
-}
-
-static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
-{
- unsigned int i, time, k, c, limit = 0;
- struct scsi_cmnd *SCpnt;
- struct Scsi_Host *shost = SCarg->device->host;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
-
- scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
-
- spin_lock_irq(shost->host_lock);
-
- if (SCarg->host_scribble == NULL)
- printk("%s: reset, inactive.\n", ha->board_name);
-
- if (ha->in_reset) {
- printk("%s: reset, exit, already in reset.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- if (wait_on_busy(shost->io_port, MAXLOOP)) {
- printk("%s: reset, exit, timeout error.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- ha->retries = 0;
-
- for (c = 0; c <= shost->max_channel; c++)
- for (k = 0; k < shost->max_id; k++) {
- ha->target_redo[k][c] = 1;
- ha->target_to[k][c] = 0;
- }
-
- for (i = 0; i < shost->can_queue; i++) {
-
- if (ha->cp_stat[i] == FREE)
- continue;
-
- if (ha->cp_stat[i] == LOCKED) {
- ha->cp_stat[i] = FREE;
- printk("%s: reset, locked mbox %d forced free.\n",
- ha->board_name, i);
- continue;
- }
-
- if (!(SCpnt = ha->cp[i].SCpnt))
- panic("%s: reset, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
-
- if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
- ha->cp_stat[i] = ABORTING;
- printk("%s: reset, mbox %d aborting.\n",
- ha->board_name, i);
- }
-
- else {
- ha->cp_stat[i] = IN_RESET;
- printk("%s: reset, mbox %d in reset.\n",
- ha->board_name, i);
- }
-
- if (SCpnt->host_scribble == NULL)
- panic("%s: reset, mbox %d, garbled SCpnt.\n", ha->board_name, i);
-
- if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: reset, mbox %d, index mismatch.\n", ha->board_name, i);
-
- if (SCpnt->scsi_done == NULL)
- panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n",
- ha->board_name, i);
- }
-
- if (do_dma(shost->io_port, 0, RESET_PIO)) {
- printk("%s: reset, cannot reset, timeout error.\n", ha->board_name);
- spin_unlock_irq(shost->host_lock);
- return FAILED;
- }
-
- printk("%s: reset, board reset done, enabling interrupts.\n", ha->board_name);
-
-#if defined(DEBUG_RESET)
- do_trace = 1;
-#endif
-
- ha->in_reset = 1;
-
- spin_unlock_irq(shost->host_lock);
-
- /* FIXME: use a sleep instead */
- time = jiffies;
- while ((jiffies - time) < (10 * HZ) && limit++ < 200000)
- udelay(100L);
-
- spin_lock_irq(shost->host_lock);
-
- printk("%s: reset, interrupts disabled, loops %d.\n", ha->board_name, limit);
-
- for (i = 0; i < shost->can_queue; i++) {
-
- if (ha->cp_stat[i] == IN_RESET) {
- SCpnt = ha->cp[i].SCpnt;
- unmap_dma(i, ha);
- SCpnt->result = DID_RESET << 16;
- SCpnt->host_scribble = NULL;
-
- /* This mailbox is still waiting for its interrupt */
- ha->cp_stat[i] = LOCKED;
-
- printk
- ("%s, reset, mbox %d locked, DID_RESET, done.\n",
- ha->board_name, i);
- }
-
- else if (ha->cp_stat[i] == ABORTING) {
- SCpnt = ha->cp[i].SCpnt;
- unmap_dma(i, ha);
- SCpnt->result = DID_RESET << 16;
- SCpnt->host_scribble = NULL;
-
- /* This mailbox was never queued to the adapter */
- ha->cp_stat[i] = FREE;
-
- printk
- ("%s, reset, mbox %d aborting, DID_RESET, done.\n",
- ha->board_name, i);
- }
-
- else
- /* Any other mailbox has already been set free by interrupt */
- continue;
-
- SCpnt->scsi_done(SCpnt);
- }
-
- ha->in_reset = 0;
- do_trace = 0;
-
- printk("%s: reset, exit.\n", ha->board_name);
-
- spin_unlock_irq(shost->host_lock);
- return SUCCESS;
-}
-
-int eata2x_bios_param(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int *dkinfo)
-{
- unsigned int size = capacity;
-
- if (ext_tran || (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
- dkinfo[0] = 255;
- dkinfo[1] = 63;
- dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
- }
-#if defined (DEBUG_GEOMETRY)
- printk("%s: bios_param, head=%d, sec=%d, cyl=%d.\n", driver_name,
- dkinfo[0], dkinfo[1], dkinfo[2]);
-#endif
-
- return 0;
-}
-
-static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
- unsigned int rev)
-{
- unsigned int i, j, k, y;
- unsigned long x;
-
- for (i = 0; i < n - 1; i++) {
- k = i;
-
- for (j = k + 1; j < n; j++)
- if (rev) {
- if (sk[j] > sk[k])
- k = j;
- } else {
- if (sk[j] < sk[k])
- k = j;
- }
-
- if (k != i) {
- x = sk[k];
- sk[k] = sk[i];
- sk[i] = x;
- y = da[k];
- da[k] = da[i];
- da[i] = y;
- }
- }
-
- return;
-}
-
-static int reorder(struct hostdata *ha, unsigned long cursec,
- unsigned int ihdlr, unsigned int il[], unsigned int n_ready)
-{
- struct scsi_cmnd *SCpnt;
- struct mscp *cpp;
- unsigned int k, n;
- unsigned int rev = 0, s = 1, r = 1;
- unsigned int input_only = 1, overlap = 0;
- unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
- unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
- unsigned long ioseek = 0;
-
- static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
- static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
- static unsigned int readysorted = 0, revcount = 0;
- static unsigned long seeksorted = 0, seeknosort = 0;
-
- if (link_statistics && !(++flushcount % link_statistics))
- printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"
- " av %ldK as %ldK.\n", flushcount, batchcount,
- inputcount, ovlcount, readycount, readysorted, sortcount,
- revcount, seeknosort / (readycount + 1),
- seeksorted / (readycount + 1));
-
- if (n_ready <= 1)
- return 0;
-
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (!cpp->din)
- input_only = 0;
-
- if (blk_rq_pos(SCpnt->request) < minsec)
- minsec = blk_rq_pos(SCpnt->request);
- if (blk_rq_pos(SCpnt->request) > maxsec)
- maxsec = blk_rq_pos(SCpnt->request);
-
- sl[n] = blk_rq_pos(SCpnt->request);
- ioseek += blk_rq_sectors(SCpnt->request);
-
- if (!n)
- continue;
-
- if (sl[n] < sl[n - 1])
- s = 0;
- if (sl[n] > sl[n - 1])
- r = 0;
-
- if (link_statistics) {
- if (sl[n] > sl[n - 1])
- seek += sl[n] - sl[n - 1];
- else
- seek += sl[n - 1] - sl[n];
- }
-
- }
-
- if (link_statistics) {
- if (cursec > sl[0])
- seek += cursec - sl[0];
- else
- seek += sl[0] - cursec;
- }
-
- if (cursec > ((maxsec + minsec) / 2))
- rev = 1;
-
- if (ioseek > ((maxsec - minsec) / 2))
- rev = 0;
-
- if (!((rev && r) || (!rev && s)))
- sort(sl, il, n_ready, rev);
-
- if (!input_only)
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
- ll[n] = blk_rq_sectors(SCpnt->request);
- pl[n] = SCpnt->serial_number;
-
- if (!n)
- continue;
-
- if ((sl[n] == sl[n - 1])
- || (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
- || (rev && ((sl[n] + ll[n]) > sl[n - 1])))
- overlap = 1;
- }
-
- if (overlap)
- sort(pl, il, n_ready, 0);
-
- if (link_statistics) {
- if (cursec > sl[0])
- iseek = cursec - sl[0];
- else
- iseek = sl[0] - cursec;
- batchcount++;
- readycount += n_ready;
- seeknosort += seek / 1024;
- if (input_only)
- inputcount++;
- if (overlap) {
- ovlcount++;
- seeksorted += iseek / 1024;
- } else
- seeksorted += (iseek + maxsec - minsec) / 1024;
- if (rev && !r) {
- revcount++;
- readysorted += n_ready;
- }
- if (!rev && !s) {
- sortcount++;
- readysorted += n_ready;
- }
- }
-#if defined(DEBUG_LINKED_COMMANDS)
- if (link_statistics && (overlap || !(flushcount % link_statistics)))
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
- scmd_printk(KERN_INFO, SCpnt,
- "%s mb %d fc %d nr %d sec %ld ns %u"
- " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
- (ihdlr ? "ihdlr" : "qcomm"),
- k, flushcount,
- n_ready, blk_rq_pos(SCpnt->request),
- blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
- YESNO(r), YESNO(rev), YESNO(input_only),
- YESNO(overlap), cpp->din);
- }
-#endif
- return overlap;
-}
-
-static void flush_dev(struct scsi_device *dev, unsigned long cursec,
- struct hostdata *ha, unsigned int ihdlr)
-{
- struct scsi_cmnd *SCpnt;
- struct mscp *cpp;
- unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
-
- for (k = 0; k < dev->host->can_queue; k++) {
-
- if (ha->cp_stat[k] != READY && ha->cp_stat[k] != IN_USE)
- continue;
-
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (SCpnt->device != dev)
- continue;
-
- if (ha->cp_stat[k] == IN_USE)
- return;
-
- il[n_ready++] = k;
- }
-
- if (reorder(ha, cursec, ihdlr, il, n_ready))
- n_ready = 1;
-
- for (n = 0; n < n_ready; n++) {
- k = il[n];
- cpp = &ha->cp[k];
- SCpnt = cpp->SCpnt;
-
- if (do_dma(dev->host->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
- scmd_printk(KERN_INFO, SCpnt,
- "%s, mbox %d, adapter"
- " busy, will abort.\n",
- (ihdlr ? "ihdlr" : "qcomm"),
- k);
- ha->cp_stat[k] = ABORTING;
- continue;
- }
-
- ha->cp_stat[k] = IN_USE;
- }
-}
-
-static irqreturn_t ihdlr(struct Scsi_Host *shost)
-{
- struct scsi_cmnd *SCpnt;
- unsigned int i, k, c, status, tstatus, reg;
- struct mssp *spp;
- struct mscp *cpp;
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- int irq = shost->irq;
-
- /* Check if this board need to be serviced */
- if (!(inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED))
- goto none;
-
- ha->iocount++;
-
- if (do_trace)
- printk("%s: ihdlr, enter, irq %d, count %d.\n", ha->board_name, irq,
- ha->iocount);
-
- /* Check if this board is still busy */
- if (wait_on_busy(shost->io_port, 20 * MAXLOOP)) {
- reg = inb(shost->io_port + REG_STATUS);
- printk
- ("%s: ihdlr, busy timeout error, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, irq, reg, ha->iocount);
- goto none;
- }
-
- spp = &ha->sp;
-
- /* Make a local copy just before clearing the interrupt indication */
- memcpy(spp, ha->sp_cpu_addr, sizeof(struct mssp));
-
- /* Clear the completion flag and cp pointer on the dynamic copy of sp */
- memset(ha->sp_cpu_addr, 0, sizeof(struct mssp));
-
- /* Read the status register to clear the interrupt indication */
- reg = inb(shost->io_port + REG_STATUS);
-
-#if defined (DEBUG_INTERRUPT)
- {
- unsigned char *bytesp;
- int cnt;
- bytesp = (unsigned char *)spp;
- if (ha->iocount < 200) {
- printk("sp[] =");
- for (cnt = 0; cnt < 15; cnt++)
- printk(" 0x%x", bytesp[cnt]);
- printk("\n");
- }
- }
-#endif
-
- /* Reject any sp with supspect data */
- if (spp->eoc == 0 && ha->iocount > 1)
- printk
- ("%s: ihdlr, spp->eoc == 0, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, irq, reg, ha->iocount);
- if (spp->cpp_index < 0 || spp->cpp_index >= shost->can_queue)
- printk
- ("%s: ihdlr, bad spp->cpp_index %d, irq %d, reg 0x%x, count %d.\n",
- ha->board_name, spp->cpp_index, irq, reg, ha->iocount);
- if (spp->eoc == 0 || spp->cpp_index < 0
- || spp->cpp_index >= shost->can_queue)
- goto handled;
-
- /* Find the mailbox to be serviced on this board */
- i = spp->cpp_index;
-
- cpp = &(ha->cp[i]);
-
-#if defined(DEBUG_GENERATE_ABORTS)
- if ((ha->iocount > 500) && ((ha->iocount % 500) < 3))
- goto handled;
-#endif
-
- if (ha->cp_stat[i] == IGNORE) {
- ha->cp_stat[i] = FREE;
- goto handled;
- } else if (ha->cp_stat[i] == LOCKED) {
- ha->cp_stat[i] = FREE;
- printk("%s: ihdlr, mbox %d unlocked, count %d.\n", ha->board_name, i,
- ha->iocount);
- goto handled;
- } else if (ha->cp_stat[i] == FREE) {
- printk("%s: ihdlr, mbox %d is free, count %d.\n", ha->board_name, i,
- ha->iocount);
- goto handled;
- } else if (ha->cp_stat[i] == IN_RESET)
- printk("%s: ihdlr, mbox %d is in reset.\n", ha->board_name, i);
- else if (ha->cp_stat[i] != IN_USE)
- panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
- ha->board_name, i, ha->cp_stat[i]);
-
- ha->cp_stat[i] = FREE;
- SCpnt = cpp->SCpnt;
-
- if (SCpnt == NULL)
- panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
-
- if (SCpnt->host_scribble == NULL)
- panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", ha->board_name,
- i, SCpnt);
-
- if (*(unsigned int *)SCpnt->host_scribble != i)
- panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
- ha->board_name, i,
- *(unsigned int *)SCpnt->host_scribble);
-
- sync_dma(i, ha);
-
- if (linked_comm && SCpnt->device->queue_depth > 2
- && TLDEV(SCpnt->device->type))
- flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
-
- tstatus = status_byte(spp->target_status);
-
-#if defined(DEBUG_GENERATE_ERRORS)
- if ((ha->iocount > 500) && ((ha->iocount % 200) < 2))
- spp->adapter_status = 0x01;
-#endif
-
- switch (spp->adapter_status) {
- case ASOK: /* status OK */
-
- /* Forces a reset if a disk drive keeps returning BUSY */
- if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
- status = DID_ERROR << 16;
-
- /* If there was a bus reset, redo operation on each target */
- else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
- && ha->target_redo[SCpnt->device->id][SCpnt->
- device->
- channel])
- status = DID_BUS_BUSY << 16;
-
- /* Works around a flaw in scsi.c */
- else if (tstatus == CHECK_CONDITION
- && SCpnt->device->type == TYPE_DISK
- && (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
- status = DID_BUS_BUSY << 16;
-
- else
- status = DID_OK << 16;
-
- if (tstatus == GOOD)
- ha->target_redo[SCpnt->device->id][SCpnt->device->
- channel] = 0;
-
- if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
- (!(tstatus == CHECK_CONDITION && ha->iocount <= 1000 &&
- (SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
- printk("%s: ihdlr, target %d.%d:%d, "
- "target_status 0x%x, sense key 0x%x.\n",
- ha->board_name,
- SCpnt->device->channel, SCpnt->device->id,
- (u8)SCpnt->device->lun,
- spp->target_status, SCpnt->sense_buffer[2]);
-
- ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
-
- if (ha->last_retried_pid == SCpnt->serial_number)
- ha->retries = 0;
-
- break;
- case ASST: /* Selection Time Out */
- case 0x02: /* Command Time Out */
-
- if (ha->target_to[SCpnt->device->id][SCpnt->device->channel] > 1)
- status = DID_ERROR << 16;
- else {
- status = DID_TIME_OUT << 16;
- ha->target_to[SCpnt->device->id][SCpnt->device->
- channel]++;
- }
-
- break;
-
- /* Perform a limited number of internal retries */
- case 0x03: /* SCSI Bus Reset Received */
- case 0x04: /* Initial Controller Power-up */
-
- for (c = 0; c <= shost->max_channel; c++)
- for (k = 0; k < shost->max_id; k++)
- ha->target_redo[k][c] = 1;
-
- if (SCpnt->device->type != TYPE_TAPE
- && ha->retries < MAX_INTERNAL_RETRIES) {
-
-#if defined(DID_SOFT_ERROR)
- status = DID_SOFT_ERROR << 16;
-#else
- status = DID_BUS_BUSY << 16;
-#endif
-
- ha->retries++;
- ha->last_retried_pid = SCpnt->serial_number;
- } else
- status = DID_ERROR << 16;
-
- break;
- case 0x05: /* Unexpected Bus Phase */
- case 0x06: /* Unexpected Bus Free */
- case 0x07: /* Bus Parity Error */
- case 0x08: /* SCSI Hung */
- case 0x09: /* Unexpected Message Reject */
- case 0x0a: /* SCSI Bus Reset Stuck */
- case 0x0b: /* Auto Request-Sense Failed */
- case 0x0c: /* Controller Ram Parity Error */
- default:
- status = DID_ERROR << 16;
- break;
- }
-
- SCpnt->result = status | spp->target_status;
-
-#if defined(DEBUG_INTERRUPT)
- if (SCpnt->result || do_trace)
-#else
- if ((spp->adapter_status != ASOK && ha->iocount > 1000) ||
- (spp->adapter_status != ASOK &&
- spp->adapter_status != ASST && ha->iocount <= 1000) ||
- do_trace || msg_byte(spp->target_status))
-#endif
- scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
- " reg 0x%x, count %d.\n",
- i, spp->adapter_status, spp->target_status,
- reg, ha->iocount);
-
- unmap_dma(i, ha);
-
- /* Set the command state to inactive */
- SCpnt->host_scribble = NULL;
-
- SCpnt->scsi_done(SCpnt);
-
- if (do_trace)
- printk("%s: ihdlr, exit, irq %d, count %d.\n", ha->board_name,
- irq, ha->iocount);
-
- handled:
- return IRQ_HANDLED;
- none:
- return IRQ_NONE;
-}
-
-static irqreturn_t do_interrupt_handler(int dummy, void *shap)
-{
- struct Scsi_Host *shost;
- unsigned int j;
- unsigned long spin_flags;
- irqreturn_t ret;
-
- /* Check if the interrupt must be processed by this handler */
- if ((j = (unsigned int)((char *)shap - sha)) >= num_boards)
- return IRQ_NONE;
- shost = sh[j];
-
- spin_lock_irqsave(shost->host_lock, spin_flags);
- ret = ihdlr(shost);
- spin_unlock_irqrestore(shost->host_lock, spin_flags);
- return ret;
-}
-
-static int eata2x_release(struct Scsi_Host *shost)
-{
- struct hostdata *ha = (struct hostdata *)shost->hostdata;
- unsigned int i;
-
- for (i = 0; i < shost->can_queue; i++)
- kfree((&ha->cp[i])->sglist);
-
- for (i = 0; i < shost->can_queue; i++)
- pci_unmap_single(ha->pdev, ha->cp[i].cp_dma_addr,
- sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
-
- if (ha->sp_cpu_addr)
- pci_free_consistent(ha->pdev, sizeof(struct mssp),
- ha->sp_cpu_addr, ha->sp_dma_addr);
-
- free_irq(shost->irq, &sha[ha->board_number]);
-
- if (shost->dma_channel != NO_DMA)
- free_dma(shost->dma_channel);
-
- release_region(shost->io_port, shost->n_io_port);
- scsi_unregister(shost);
- return 0;
-}
-
-#include "scsi_module.c"
-
-#ifndef MODULE
-__setup("eata=", option_setup);
-#endif /* end MODULE */
deleted file mode 100644
@@ -1,401 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/********************************************************
-* Header file for eata_dma.c and eata_pio.c *
-* Linux EATA SCSI drivers *
-* (c) 1993-96 Michael Neuffer *
-* mike@i-Connect.Net *
-* neuffer@mail.uni-mainz.de *
-*********************************************************
-* last change: 96/08/14 *
-********************************************************/
-
-
-#ifndef _EATA_GENERIC_H
-#define _EATA_GENERIC_H
-
-
-
-/*********************************************
- * Misc. definitions *
- *********************************************/
-
-#define R_LIMIT 0x20000
-
-#define MAXISA 4
-#define MAXEISA 16
-#define MAXPCI 16
-#define MAXIRQ 16
-#define MAXTARGET 16
-#define MAXCHANNEL 3
-
-#define IS_ISA 'I'
-#define IS_EISA 'E'
-#define IS_PCI 'P'
-
-#define BROKEN_INQUIRY 1
-
-#define BUSMASTER 0xff
-#define PIO 0xfe
-
-#define EATA_SIGNATURE 0x45415441 /* BIG ENDIAN coded "EATA" sig. */
-
-#define DPT_ID1 0x12
-#define DPT_ID2 0x14
-
-#define ATT_ID1 0x06
-#define ATT_ID2 0x94
-#define ATT_ID3 0x0
-
-#define NEC_ID1 0x38
-#define NEC_ID2 0xa3
-#define NEC_ID3 0x82
-
-
-#define EATA_CP_SIZE 44
-
-#define MAX_PCI_DEVICES 32 /* Maximum # Of Devices Per Bus */
-#define MAX_METHOD_2 16 /* Max Devices For Method 2 */
-#define MAX_PCI_BUS 16 /* Maximum # Of Busses Allowed */
-
-#define SG_SIZE 64
-#define SG_SIZE_BIG 252 /* max. 8096 elements, 64k */
-
-#define UPPER_DEVICE_QUEUE_LIMIT 64 /* The limit we have to set for the
- * device queue to keep the broken
- * midlevel SCSI code from producing
- * bogus timeouts
- */
-
-#define TYPE_DISK_QUEUE 16
-#define TYPE_TAPE_QUEUE 4
-#define TYPE_ROM_QUEUE 4
-#define TYPE_OTHER_QUEUE 2
-
-#define FREE 0
-#define OK 0
-#define NO_TIMEOUT 0
-#define USED 1
-#define TIMEOUT 2
-#define RESET 4
-#define LOCKED 8
-#define ABORTED 16
-
-#define READ 0
-#define WRITE 1
-#define OTHER 2
-
-#define HD(cmd) ((hostdata *)&(cmd->device->host->hostdata))
-#define CD(cmd) ((struct eata_ccb *)(cmd->host_scribble))
-#define SD(host) ((hostdata *)&(host->hostdata))
-
-/***********************************************
- * EATA Command & Register definitions *
- ***********************************************/
-#define PCI_REG_DPTconfig 0x40
-#define PCI_REG_PumpModeAddress 0x44
-#define PCI_REG_PumpModeData 0x48
-#define PCI_REG_ConfigParam1 0x50
-#define PCI_REG_ConfigParam2 0x54
-
-
-#define EATA_CMD_PIO_SETUPTEST 0xc6
-#define EATA_CMD_PIO_READ_CONFIG 0xf0
-#define EATA_CMD_PIO_SET_CONFIG 0xf1
-#define EATA_CMD_PIO_SEND_CP 0xf2
-#define EATA_CMD_PIO_RECEIVE_SP 0xf3
-#define EATA_CMD_PIO_TRUNC 0xf4
-
-#define EATA_CMD_RESET 0xf9
-#define EATA_CMD_IMMEDIATE 0xfa
-
-#define EATA_CMD_DMA_READ_CONFIG 0xfd
-#define EATA_CMD_DMA_SET_CONFIG 0xfe
-#define EATA_CMD_DMA_SEND_CP 0xff
-
-#define ECS_EMULATE_SENSE 0xd4
-
-#define EATA_GENERIC_ABORT 0x00
-#define EATA_SPECIFIC_RESET 0x01
-#define EATA_BUS_RESET 0x02
-#define EATA_SPECIFIC_ABORT 0x03
-#define EATA_QUIET_INTR 0x04
-#define EATA_COLD_BOOT_HBA 0x06 /* Only as a last resort */
-#define EATA_FORCE_IO 0x07
-
-#define HA_CTRLREG 0x206 /* control register for HBA */
-#define HA_CTRL_DISINT 0x02 /* CTRLREG: disable interrupts */
-#define HA_CTRL_RESCPU 0x04 /* CTRLREG: reset processor */
-#define HA_CTRL_8HEADS 0x08 /* CTRLREG: set for drives with*
- * >=8 heads (WD1003 rudimentary :-) */
-
-#define HA_WCOMMAND 0x07 /* command register offset */
-#define HA_WIFC 0x06 /* immediate command offset */
-#define HA_WCODE 0x05
-#define HA_WCODE2 0x04
-#define HA_WDMAADDR 0x02 /* DMA address LSB offset */
-#define HA_RAUXSTAT 0x08 /* aux status register offset*/
-#define HA_RSTATUS 0x07 /* status register offset */
-#define HA_RDATA 0x00 /* data register (16bit) */
-#define HA_WDATA 0x00 /* data register (16bit) */
-
-#define HA_ABUSY 0x01 /* aux busy bit */
-#define HA_AIRQ 0x02 /* aux IRQ pending bit */
-#define HA_SERROR 0x01 /* pr. command ended in error*/
-#define HA_SMORE 0x02 /* more data soon to come */
-#define HA_SCORR 0x04 /* data corrected */
-#define HA_SDRQ 0x08 /* data request active */
-#define HA_SSC 0x10 /* seek complete */
-#define HA_SFAULT 0x20 /* write fault */
-#define HA_SREADY 0x40 /* drive ready */
-#define HA_SBUSY 0x80 /* drive busy */
-#define HA_SDRDY HA_SSC+HA_SREADY+HA_SDRQ
-
-/**********************************************
- * Message definitions *
- **********************************************/
-
-#define HA_NO_ERROR 0x00 /* No Error */
-#define HA_ERR_SEL_TO 0x01 /* Selection Timeout */
-#define HA_ERR_CMD_TO 0x02 /* Command Timeout */
-#define HA_BUS_RESET 0x03 /* SCSI Bus Reset Received */
-#define HA_INIT_POWERUP 0x04 /* Initial Controller Power-up */
-#define HA_UNX_BUSPHASE 0x05 /* Unexpected Bus Phase */
-#define HA_UNX_BUS_FREE 0x06 /* Unexpected Bus Free */
-#define HA_BUS_PARITY 0x07 /* Bus Parity Error */
-#define HA_SCSI_HUNG 0x08 /* SCSI Hung */
-#define HA_UNX_MSGRJCT 0x09 /* Unexpected Message Rejected */
-#define HA_RESET_STUCK 0x0a /* SCSI Bus Reset Stuck */
-#define HA_RSENSE_FAIL 0x0b /* Auto Request-Sense Failed */
-#define HA_PARITY_ERR 0x0c /* Controller Ram Parity Error */
-#define HA_CP_ABORT_NA 0x0d /* Abort Message sent to non-active cmd */
-#define HA_CP_ABORTED 0x0e /* Abort Message sent to active cmd */
-#define HA_CP_RESET_NA 0x0f /* Reset Message sent to non-active cmd */
-#define HA_CP_RESET 0x10 /* Reset Message sent to active cmd */
-#define HA_ECC_ERR 0x11 /* Controller Ram ECC Error */
-#define HA_PCI_PARITY 0x12 /* PCI Parity Error */
-#define HA_PCI_MABORT 0x13 /* PCI Master Abort */
-#define HA_PCI_TABORT 0x14 /* PCI Target Abort */
-#define HA_PCI_STABORT 0x15 /* PCI Signaled Target Abort */
-
-/**********************************************
- * Other definitions *
- **********************************************/
-
-struct reg_bit { /* reading this one will clear the interrupt */
- __u8 error:1; /* previous command ended in an error */
- __u8 more:1; /* more DATA coming soon, poll BSY & DRQ (PIO) */
- __u8 corr:1; /* data read was successfully corrected with ECC*/
- __u8 drq:1; /* data request active */
- __u8 sc:1; /* seek complete */
- __u8 fault:1; /* write fault */
- __u8 ready:1; /* drive ready */
- __u8 busy:1; /* controller busy */
-};
-
-struct reg_abit { /* reading this won't clear the interrupt */
- __u8 abusy:1; /* auxiliary busy */
- __u8 irq:1; /* set when drive interrupt is asserted */
- __u8 dummy:6;
-};
-
-struct eata_register { /* EATA register set */
- __u8 data_reg[2]; /* R, couldn't figure this one out */
- __u8 cp_addr[4]; /* W, CP address register */
- union {
- __u8 command; /* W, command code: [read|set] conf, send CP*/
- struct reg_bit status; /* R, see register_bit1 */
- __u8 statusbyte;
- } ovr;
- struct reg_abit aux_stat; /* R, see register_bit2 */
-};
-
-struct get_conf { /* Read Configuration Array */
- __u32 len; /* Should return 0x22, 0x24, etc */
- __u32 signature; /* Signature MUST be "EATA" */
- __u8 version2:4,
- version:4; /* EATA Version level */
- __u8 OCS_enabled:1, /* Overlap Command Support enabled */
- TAR_support:1, /* SCSI Target Mode supported */
- TRNXFR:1, /* Truncate Transfer Cmd not necessary *
- * Only used in PIO Mode */
- MORE_support:1, /* MORE supported (only PIO Mode) */
- DMA_support:1, /* DMA supported Driver uses only *
- * this mode */
- DMA_valid:1, /* DRQ value in Byte 30 is valid */
- ATA:1, /* ATA device connected (not supported) */
- HAA_valid:1; /* Hostadapter Address is valid */
-
- __u16 cppadlen; /* Number of pad bytes send after CD data *
- * set to zero for DMA commands */
- __u8 scsi_id[4]; /* SCSI ID of controller 2-0 Byte 0 res. *
- * if not, zero is returned */
- __u32 cplen; /* CP length: number of valid cp bytes */
- __u32 splen; /* Number of bytes returned after *
- * Receive SP command */
- __u16 queuesiz; /* max number of queueable CPs */
- __u16 dummy;
- __u16 SGsiz; /* max number of SG table entries */
- __u8 IRQ:4, /* IRQ used this HA */
- IRQ_TR:1, /* IRQ Trigger: 0=edge, 1=level */
- SECOND:1, /* This is a secondary controller */
- DMA_channel:2; /* DRQ index, DRQ is 2comp of DRQX */
- __u8 sync; /* device at ID 7 tru 0 is running in *
- * synchronous mode, this will disappear */
- __u8 DSBLE:1, /* ISA i/o addressing is disabled */
- FORCADR:1, /* i/o address has been forced */
- SG_64K:1,
- SG_UAE:1,
- :4;
- __u8 MAX_ID:5, /* Max number of SCSI target IDs */
- MAX_CHAN:3; /* Number of SCSI busses on HBA */
- __u8 MAX_LUN; /* Max number of LUNs */
- __u8 :3,
- AUTOTRM:1,
- M1_inst:1,
- ID_qest:1, /* Raidnum ID is questionable */
- is_PCI:1, /* HBA is PCI */
- is_EISA:1; /* HBA is EISA */
- __u8 RAIDNUM; /* unique HBA identifier */
- __u8 unused[474];
-};
-
-struct eata_sg_list
-{
- __u32 data;
- __u32 len;
-};
-
-struct eata_ccb { /* Send Command Packet structure */
-
- __u8 SCSI_Reset:1, /* Cause a SCSI Bus reset on the cmd */
- HBA_Init:1, /* Cause Controller to reinitialize */
- Auto_Req_Sen:1, /* Do Auto Request Sense on errors */
- scatter:1, /* Data Ptr points to a SG Packet */
- Resrvd:1, /* RFU */
- Interpret:1, /* Interpret the SCSI cdb of own use */
- DataOut:1, /* Data Out phase with command */
- DataIn:1; /* Data In phase with command */
- __u8 reqlen; /* Request Sense Length *
- * Valid if Auto_Req_Sen=1 */
- __u8 unused[3];
- __u8 FWNEST:1, /* send cmd to phys RAID component */
- unused2:7;
- __u8 Phsunit:1, /* physical unit on mirrored pair */
- I_AT:1, /* inhibit address translation */
- I_HBA_C:1, /* HBA inhibit caching */
- unused3:5;
-
- __u8 cp_id:5, /* SCSI Device ID of target */
- cp_channel:3; /* SCSI Channel # of HBA */
- __u8 cp_lun:3,
- :2,
- cp_luntar:1, /* CP is for target ROUTINE */
- cp_dispri:1, /* Grant disconnect privilege */
- cp_identify:1; /* Always TRUE */
- __u8 cp_msg1; /* Message bytes 0-3 */
- __u8 cp_msg2;
- __u8 cp_msg3;
- __u8 cp_cdb[12]; /* Command Descriptor Block */
- __u32 cp_datalen; /* Data Transfer Length *
- * If scatter=1 len of sg package */
- void *cp_viraddr; /* address of this ccb */
- __u32 cp_dataDMA; /* Data Address, if scatter=1 *
- * address of scatter packet */
- __u32 cp_statDMA; /* address for Status Packet */
- __u32 cp_reqDMA; /* Request Sense Address, used if *
- * CP command ends with error */
- /* Additional CP info begins here */
- __u32 timestamp; /* Needed to measure command latency */
- __u32 timeout;
- __u8 sizeindex;
- __u8 rw_latency;
- __u8 retries;
- __u8 status; /* status of this queueslot */
- struct scsi_cmnd *cmd; /* address of cmd */
- struct eata_sg_list *sg_list;
-};
-
-
-struct eata_sp {
- __u8 hba_stat:7, /* HBA status */
- EOC:1; /* True if command finished */
- __u8 scsi_stat; /* Target SCSI status */
- __u8 reserved[2];
- __u32 residue_len; /* Number of bytes not transferred */
- struct eata_ccb *ccb; /* Address set in COMMAND PACKET */
- __u8 msg[12];
-};
-
-typedef struct hstd {
- __u8 vendor[9];
- __u8 name[18];
- __u8 revision[6];
- __u8 EATA_revision;
- __u32 firmware_revision;
- __u8 HBA_number;
- __u8 bustype; /* bustype of HBA */
- __u8 channel; /* # of avail. scsi channels */
- __u8 state; /* state of HBA */
- __u8 primary; /* true if primary */
- __u8 more_support:1, /* HBA supports MORE flag */
- immediate_support:1, /* HBA supports IMMEDIATE CMDs*/
- broken_INQUIRY:1; /* This is an EISA HBA with *
- * broken INQUIRY */
- __u8 do_latency; /* Latency measurement flag */
- __u32 reads[13];
- __u32 writes[13];
- __u32 reads_lat[12][4];
- __u32 writes_lat[12][4];
- __u32 all_lat[4];
- __u8 resetlevel[MAXCHANNEL];
- __u32 last_ccb; /* Last used ccb */
- __u32 cplen; /* size of CP in words */
- __u16 cppadlen; /* pad length of cp in words */
- __u16 queuesize;
- __u16 sgsize; /* # of entries in the SG list*/
- __u16 devflags; /* bits set for detected devices */
- __u8 hostid; /* SCSI ID of HBA */
- __u8 moresupport; /* HBA supports MORE flag */
- struct Scsi_Host *next;
- struct Scsi_Host *prev;
- struct pci_dev *pdev; /* PCI device or NULL for non PCI */
- struct eata_sp sp; /* status packet */
- struct eata_ccb ccb[0]; /* ccb array begins here */
-}hostdata;
-
-/* structure for max. 2 emulated drives */
-struct drive_geom_emul {
- __u8 trans; /* translation flag 1=transl */
- __u8 channel; /* SCSI channel number */
- __u8 HBA; /* HBA number (prim/sec) */
- __u8 id; /* drive id */
- __u8 lun; /* drive lun */
- __u32 heads; /* number of heads */
- __u32 sectors; /* number of sectors */
- __u32 cylinder; /* number of cylinders */
-};
-
-struct geom_emul {
- __u8 bios_drives; /* number of emulated drives */
- struct drive_geom_emul drv[2]; /* drive structures */
-};
-
-#endif /* _EATA_GENERIC_H */
-
-/*
- * Overrides for Emacs so that we almost follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * tab-width: 8
- * End:
- */
deleted file mode 100644
@@ -1,966 +0,0 @@
-/************************************************************
- * *
- * Linux EATA SCSI PIO driver *
- * *
- * based on the CAM document CAM/89-004 rev. 2.0c, *
- * DPT's driver kit, some internal documents and source, *
- * and several other Linux scsi drivers and kernel docs. *
- * *
- * The driver currently: *
- * -supports all EATA-PIO boards *
- * -only supports DASD devices *
- * *
- * (c)1993-96 Michael Neuffer, Alfred Arnold *
- * neuffer@goofy.zdv.uni-mainz.de *
- * a.arnold@kfa-juelich.de *
- * *
- * Updated 2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> for *
- * Linux 2.5.x and the newer locking and error handling *
- * *
- * This program is free software; you can redistribute it *
- * and/or modify it under the terms of the GNU General *
- * Public License as published by the Free Software *
- * Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be *
- * useful, but WITHOUT ANY WARRANTY; without even the *
- * implied warranty of MERCHANTABILITY or FITNESS FOR A *
- * PARTICULAR PURPOSE. See the GNU General Public License *
- * for more details. *
- * *
- * You should have received a copy of the GNU General *
- * Public License along with this kernel; if not, write to *
- * the Free Software Foundation, Inc., 675 Mass Ave, *
- * Cambridge, MA 02139, USA. *
- * *
- * For the avoidance of doubt the "preferred form" of this *
- * code is one which is in an open non patent encumbered *
- * format. Where cryptographic key signing forms part of *
- * the process of creating an executable the information *
- * including keys needed to generate an equivalently *
- * functional executable are deemed to be part of the *
- * source code are deemed to be part of the source code. *
- * *
- ************************************************************
- * last change: 2002/11/02 OS: Linux 2.5.45 *
- ************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-#include <asm/io.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-
-#include "eata_generic.h"
-#include "eata_pio.h"
-
-
-static unsigned int ISAbases[MAXISA] = {
- 0x1F0, 0x170, 0x330, 0x230
-};
-
-static unsigned int ISAirqs[MAXISA] = {
- 14, 12, 15, 11
-};
-
-static unsigned char EISAbases[] = {
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1
-};
-
-static unsigned int registered_HBAs;
-static struct Scsi_Host *last_HBA;
-static struct Scsi_Host *first_HBA;
-static unsigned char reg_IRQ[16];
-static unsigned char reg_IRQL[16];
-static unsigned long int_counter;
-static unsigned long queue_counter;
-
-static struct scsi_host_template driver_template;
-
-static int eata_pio_show_info(struct seq_file *m, struct Scsi_Host *shost)
-{
- seq_printf(m, "EATA (Extended Attachment) PIO driver version: "
- "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);
- seq_printf(m, "queued commands: %10ld\n"
- "processed interrupts:%10ld\n", queue_counter, int_counter);
- seq_printf(m, "\nscsi%-2d: HBA %.10s\n",
- shost->host_no, SD(shost)->name);
- seq_printf(m, "Firmware revision: v%s\n",
- SD(shost)->revision);
- seq_puts(m, "IO: PIO\n");
- seq_printf(m, "Base IO : %#.4x\n", (u32) shost->base);
- seq_printf(m, "Host Bus: %s\n",
- (SD(shost)->bustype == 'P')?"PCI ":
- (SD(shost)->bustype == 'E')?"EISA":"ISA ");
- return 0;
-}
-
-static int eata_pio_release(struct Scsi_Host *sh)
-{
- hostdata *hd = SD(sh);
- if (sh->irq && reg_IRQ[sh->irq] == 1)
- free_irq(sh->irq, NULL);
- else
- reg_IRQ[sh->irq]--;
- if (SD(sh)->channel == 0) {
- if (sh->io_port && sh->n_io_port)
- release_region(sh->io_port, sh->n_io_port);
- }
- /* At this point the PCI reference can go */
- if (hd->pdev)
- pci_dev_put(hd->pdev);
- return 1;
-}
-
-static void IncStat(struct scsi_pointer *SCp, unsigned int Increment)
-{
- SCp->ptr += Increment;
- if ((SCp->this_residual -= Increment) == 0) {
- if ((--SCp->buffers_residual) == 0)
- SCp->Status = 0;
- else {
- SCp->buffer++;
- SCp->ptr = sg_virt(SCp->buffer);
- SCp->this_residual = SCp->buffer->length;
- }
- }
-}
-
-static irqreturn_t eata_pio_int_handler(int irq, void *dev_id);
-
-static irqreturn_t do_eata_pio_int_handler(int irq, void *dev_id)
-{
- unsigned long flags;
- struct Scsi_Host *dev = dev_id;
- irqreturn_t ret;
-
- spin_lock_irqsave(dev->host_lock, flags);
- ret = eata_pio_int_handler(irq, dev_id);
- spin_unlock_irqrestore(dev->host_lock, flags);
- return ret;
-}
-
-static irqreturn_t eata_pio_int_handler(int irq, void *dev_id)
-{
- unsigned int eata_stat = 0xfffff;
- struct scsi_cmnd *cmd;
- hostdata *hd;
- struct eata_ccb *cp;
- unsigned long base;
- unsigned int x, z;
- struct Scsi_Host *sh;
- unsigned short zwickel = 0;
- unsigned char stat, odd;
- irqreturn_t ret = IRQ_NONE;
-
- for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev)
- {
- if (sh->irq != irq)
- continue;
- if (inb(sh->base + HA_RSTATUS) & HA_SBUSY)
- continue;
-
- int_counter++;
- ret = IRQ_HANDLED;
-
- hd = SD(sh);
-
- cp = &hd->ccb[0];
- cmd = cp->cmd;
- base = cmd->device->host->base;
-
- do {
- stat = inb(base + HA_RSTATUS);
- if (stat & HA_SDRQ) {
- if (cp->DataIn) {
- z = 256;
- odd = 0;
- while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
- if (odd) {
- *(cmd->SCp.ptr) = zwickel >> 8;
- IncStat(&cmd->SCp, 1);
- odd = 0;
- }
- x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
- insw(base + HA_RDATA, cmd->SCp.ptr, x);
- z -= x;
- IncStat(&cmd->SCp, 2 * x);
- if ((z > 0) && (cmd->SCp.this_residual == 1)) {
- zwickel = inw(base + HA_RDATA);
- *(cmd->SCp.ptr) = zwickel & 0xff;
- IncStat(&cmd->SCp, 1);
- z--;
- odd = 1;
- }
- }
- while (z > 0) {
- zwickel = inw(base + HA_RDATA);
- z--;
- }
- } else { /* cp->DataOut */
-
- odd = 0;
- z = 256;
- while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
- if (odd) {
- zwickel += *(cmd->SCp.ptr) << 8;
- IncStat(&cmd->SCp, 1);
- outw(zwickel, base + HA_RDATA);
- z--;
- odd = 0;
- }
- x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
- outsw(base + HA_RDATA, cmd->SCp.ptr, x);
- z -= x;
- IncStat(&cmd->SCp, 2 * x);
- if ((z > 0) && (cmd->SCp.this_residual == 1)) {
- zwickel = *(cmd->SCp.ptr);
- zwickel &= 0xff;
- IncStat(&cmd->SCp, 1);
- odd = 1;
- }
- }
- while (z > 0 || odd) {
- outw(zwickel, base + HA_RDATA);
- z--;
- odd = 0;
- }
- }
- }
- }
- while ((stat & HA_SDRQ) || ((stat & HA_SMORE) && hd->moresupport));
-
- /* terminate handler if HBA goes busy again, i.e. transfers
- * more data */
-
- if (stat & HA_SBUSY)
- break;
-
- /* OK, this is quite stupid, but I haven't found any correct
- * way to get HBA&SCSI status so far */
-
- if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {
- cmd->result = (DID_OK << 16);
- hd->devflags |= (1 << cp->cp_id);
- } else if (hd->devflags & (1 << cp->cp_id))
- cmd->result = (DID_OK << 16) + 0x02;
- else
- cmd->result = (DID_NO_CONNECT << 16);
-
- if (cp->status == LOCKED) {
- cp->status = FREE;
- eata_stat = inb(base + HA_RSTATUS);
- printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n");
- return ret;
- }
-#if DBG_INTR2
- if (stat != 0x50)
- printk(KERN_DEBUG "stat: %#.2x, result: %#.8x\n", stat, cmd->result);
-#endif
-
- cp->status = FREE; /* now we can release the slot */
-
- cmd->scsi_done(cmd);
- }
-
- return ret;
-}
-
-static inline unsigned int eata_pio_send_command(unsigned long base, unsigned char command)
-{
- unsigned int loop = 50;
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- if (--loop == 0)
- return 1;
-
- /* Enable interrupts for HBA. It is not the best way to do it at this
- * place, but I hope that it doesn't interfere with the IDE driver
- * initialization this way */
-
- outb(HA_CTRL_8HEADS, base + HA_CTRLREG);
-
- outb(command, base + HA_WCOMMAND);
- return 0;
-}
-
-static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
-{
- unsigned int x, y;
- unsigned long base;
-
- hostdata *hd;
- struct Scsi_Host *sh;
- struct eata_ccb *cp;
-
- queue_counter++;
-
- hd = HD(cmd);
- sh = cmd->device->host;
- base = sh->base;
-
- /* use only slot 0, as 2001 can handle only one cmd at a time */
-
- y = x = 0;
-
- if (hd->ccb[y].status != FREE) {
-
- DBG(DBG_QUEUE, printk(KERN_EMERG "can_queue %d, x %d, y %d\n", sh->can_queue, x, y));
-#if DEBUG_EATA
- panic(KERN_EMERG "eata_pio: run out of queue slots cmdno:%ld " "intrno: %ld\n", queue_counter, int_counter);
-#else
- panic(KERN_EMERG "eata_pio: run out of queue slots....\n");
-#endif
- }
-
- cp = &hd->ccb[y];
-
- memset(cp, 0, sizeof(struct eata_ccb));
-
- cp->status = USED; /* claim free slot */
-
- DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "eata_pio_queue 0x%p, y %d\n", cmd, y));
-
- cmd->scsi_done = (void *) done;
-
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- cp->DataOut = 1; /* Output mode */
- else
- cp->DataIn = 0; /* Input mode */
-
- cp->Interpret = (cmd->device->id == hd->hostid);
- cp->cp_datalen = cpu_to_be32(scsi_bufflen(cmd));
- cp->Auto_Req_Sen = 0;
- cp->cp_reqDMA = 0;
- cp->reqlen = 0;
-
- cp->cp_id = cmd->device->id;
- cp->cp_lun = cmd->device->lun;
- cp->cp_dispri = 0;
- cp->cp_identify = 1;
- memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
-
- cp->cp_statDMA = 0;
-
- cp->cp_viraddr = cp;
- cp->cmd = cmd;
- cmd->host_scribble = (char *) &hd->ccb[y];
-
- if (!scsi_bufflen(cmd)) {
- cmd->SCp.buffers_residual = 1;
- cmd->SCp.ptr = NULL;
- cmd->SCp.this_residual = 0;
- cmd->SCp.buffer = NULL;
- } else {
- cmd->SCp.buffer = scsi_sglist(cmd);
- cmd->SCp.buffers_residual = scsi_sg_count(cmd);
- cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- }
- cmd->SCp.Status = (cmd->SCp.this_residual != 0); /* TRUE as long as bytes
- * are to transfer */
-
- if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
- cmd->result = DID_BUS_BUSY << 16;
- scmd_printk(KERN_NOTICE, cmd,
- "eata_pio_queue pid 0x%p, HBA busy, "
- "returning DID_BUS_BUSY, done.\n", cmd);
- done(cmd);
- cp->status = FREE;
- return 0;
- }
- /* FIXME: timeout */
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- cpu_relax();
- outsw(base + HA_RDATA, cp, hd->cplen);
- outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
- for (x = 0; x < hd->cppadlen; x++)
- outw(0, base + HA_RDATA);
-
- DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
- "Queued base %#.4lx cmd: 0x%p "
- "slot %d irq %d\n", sh->base, cmd, y, sh->irq));
-
- return 0;
-}
-
-static DEF_SCSI_QCMD(eata_pio_queue)
-
-static int eata_pio_abort(struct scsi_cmnd *cmd)
-{
- unsigned int loop = 100;
-
- DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_abort called pid: 0x%p\n", cmd));
-
- while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
- if (--loop == 0) {
- printk(KERN_WARNING "eata_pio: abort, timeout error.\n");
- return FAILED;
- }
- if (CD(cmd)->status == FREE) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_NOT_RUNNING\n"));
- return FAILED;
- }
- if (CD(cmd)->status == USED) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_BUSY\n"));
- /* We want to sleep a bit more here */
- return FAILED; /* SNOOZE */
- }
- if (CD(cmd)->status == RESET) {
- printk(KERN_WARNING "eata_pio: abort, command reset error.\n");
- return FAILED;
- }
- if (CD(cmd)->status == LOCKED) {
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio: abort, queue slot " "locked.\n"));
- return FAILED;
- }
- panic("eata_pio: abort: invalid slot status\n");
-}
-
-static int eata_pio_host_reset(struct scsi_cmnd *cmd)
-{
- unsigned int x, limit = 0;
- unsigned char success = 0;
- struct scsi_cmnd *sp;
- struct Scsi_Host *host = cmd->device->host;
-
- DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
- "eata_pio_reset called\n"));
-
- spin_lock_irq(host->host_lock);
-
- if (HD(cmd)->state == RESET) {
- printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
- spin_unlock_irq(host->host_lock);
- return FAILED;
- }
-
- /* force all slots to be free */
-
- for (x = 0; x < cmd->device->host->can_queue; x++) {
-
- if (HD(cmd)->ccb[x].status == FREE)
- continue;
-
- sp = HD(cmd)->ccb[x].cmd;
- HD(cmd)->ccb[x].status = RESET;
- printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
-
- if (sp == NULL)
- panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
- }
-
- /* hard reset the HBA */
- outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND);
-
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
- HD(cmd)->state = RESET;
-
- spin_unlock_irq(host->host_lock);
- msleep(3000);
- spin_lock_irq(host->host_lock);
-
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, " "loops %d.\n", limit));
-
- for (x = 0; x < cmd->device->host->can_queue; x++) {
-
- /* Skip slots already set free by interrupt */
- if (HD(cmd)->ccb[x].status != RESET)
- continue;
-
- sp = HD(cmd)->ccb[x].cmd;
- sp->result = DID_RESET << 16;
-
- /* This mailbox is terminated */
- printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n", x);
- HD(cmd)->ccb[x].status = FREE;
-
- sp->scsi_done(sp);
- }
-
- HD(cmd)->state = 0;
-
- spin_unlock_irq(host->host_lock);
-
- if (success) { /* hmmm... */
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
- return SUCCESS;
- } else {
- DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, wakeup.\n"));
- return FAILED;
- }
-}
-
-static char *get_pio_board_data(unsigned long base, unsigned int irq, unsigned int id, unsigned long cplen, unsigned short cppadlen)
-{
- struct eata_ccb cp;
- static char buff[256];
- int z;
-
- memset(&cp, 0, sizeof(struct eata_ccb));
- memset(buff, 0, sizeof(buff));
-
- cp.DataIn = 1;
- cp.Interpret = 1; /* Interpret command */
-
- cp.cp_datalen = cpu_to_be32(254);
- cp.cp_dataDMA = cpu_to_be32(0);
-
- cp.cp_id = id;
- cp.cp_lun = 0;
-
- cp.cp_cdb[0] = INQUIRY;
- cp.cp_cdb[1] = 0;
- cp.cp_cdb[2] = 0;
- cp.cp_cdb[3] = 0;
- cp.cp_cdb[4] = 254;
- cp.cp_cdb[5] = 0;
-
- if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP))
- return NULL;
-
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- cpu_relax();
-
- outsw(base + HA_RDATA, &cp, cplen);
- outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
- for (z = 0; z < cppadlen; z++)
- outw(0, base + HA_RDATA);
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- cpu_relax();
-
- if (inb(base + HA_RSTATUS) & HA_SERROR)
- return NULL;
- else if (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- return NULL;
- else {
- insw(base + HA_RDATA, &buff, 127);
- while (inb(base + HA_RSTATUS) & HA_SDRQ)
- inw(base + HA_RDATA);
- return buff;
- }
-}
-
-static int get_pio_conf_PIO(unsigned long base, struct get_conf *buf)
-{
- unsigned long loop = HZ / 2;
- int z;
- unsigned short *p;
-
- if (!request_region(base, 9, "eata_pio"))
- return 0;
-
- memset(buf, 0, sizeof(struct get_conf));
-
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- if (--loop == 0)
- goto fail;
-
- DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#lx\n", base));
- eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
-
- loop = 50;
- for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) {
- while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
- if (--loop == 0)
- goto fail;
-
- loop = 50;
- *p = inw(base + HA_RDATA);
- }
- if (inb(base + HA_RSTATUS) & HA_SERROR) {
- DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during "
- "transfer for HBA at %lx\n", base));
- goto fail;
- }
-
- if (cpu_to_be32(EATA_SIGNATURE) != buf->signature)
- goto fail;
-
- DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found "
- "at %#4lx EATA Level: %x\n",
- base, (unsigned int) (buf->version)));
-
- while (inb(base + HA_RSTATUS) & HA_SDRQ)
- inw(base + HA_RDATA);
-
- if (!ALLOW_DMA_BOARDS) {
- for (z = 0; z < MAXISA; z++)
- if (base == ISAbases[z]) {
- buf->IRQ = ISAirqs[z];
- break;
- }
- }
-
- return 1;
-
- fail:
- release_region(base, 9);
- return 0;
-}
-
-static void print_pio_config(struct get_conf *gc)
-{
- printk("Please check values: (read config data)\n");
- printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", be32_to_cpu(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
- printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], be16_to_cpu(gc->queuesiz), be16_to_cpu(gc->SGsiz), gc->SECOND);
- printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest);
-}
-
-static unsigned int print_selftest(unsigned int base)
-{
- unsigned char buffer[512];
-#ifdef VERBOSE_SETUP
- int z;
-#endif
-
- printk("eata_pio: executing controller self test & setup...\n");
- while (inb(base + HA_RSTATUS) & HA_SBUSY);
- outb(EATA_CMD_PIO_SETUPTEST, base + HA_WCOMMAND);
- do {
- while (inb(base + HA_RSTATUS) & HA_SBUSY)
- /* nothing */ ;
- if (inb(base + HA_RSTATUS) & HA_SDRQ) {
- insw(base + HA_RDATA, &buffer, 256);
-#ifdef VERBOSE_SETUP
- /* no beeps please... */
- for (z = 0; z < 511 && buffer[z]; z++)
- if (buffer[z] != 7)
- printk("%c", buffer[z]);
-#endif
- }
- } while (inb(base + HA_RSTATUS) & (HA_SBUSY | HA_SDRQ));
-
- return (!(inb(base + HA_RSTATUS) & HA_SERROR));
-}
-
-static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev)
-{
- unsigned long size = 0;
- char *buff;
- unsigned long cplen;
- unsigned short cppadlen;
- struct Scsi_Host *sh;
- hostdata *hd;
-
- DBG(DBG_REGISTER, print_pio_config(gc));
-
- if (gc->DMA_support) {
- printk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n", base);
- if (!ALLOW_DMA_BOARDS)
- return 0;
- }
-
- if ((buff = get_pio_board_data(base, gc->IRQ, gc->scsi_id[3], cplen = (cpu_to_be32(gc->cplen) + 1) / 2, cppadlen = (cpu_to_be16(gc->cppadlen) + 1) / 2)) == NULL) {
- printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base);
- return 0;
- }
-
- if (!print_selftest(base) && !ALLOW_DMA_BOARDS) {
- printk("HBA at %#lx failed while performing self test & setup.\n", base);
- return 0;
- }
-
- size = sizeof(hostdata) + (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz));
-
- sh = scsi_register(&driver_template, size);
- if (sh == NULL)
- return 0;
-
- if (!reg_IRQ[gc->IRQ]) { /* Interrupt already registered ? */
- if (!request_irq(gc->IRQ, do_eata_pio_int_handler, 0, "EATA-PIO", sh)) {
- reg_IRQ[gc->IRQ]++;
- if (!gc->IRQ_TR)
- reg_IRQL[gc->IRQ] = 1; /* IRQ is edge triggered */
- } else {
- printk("Couldn't allocate IRQ %d, Sorry.\n", gc->IRQ);
- return 0;
- }
- } else { /* More than one HBA on this IRQ */
- if (reg_IRQL[gc->IRQ]) {
- printk("Can't support more than one HBA on this IRQ,\n" " if the IRQ is edge triggered. Sorry.\n");
- return 0;
- } else
- reg_IRQ[gc->IRQ]++;
- }
-
- hd = SD(sh);
-
- memset(hd->ccb, 0, (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz)));
- memset(hd->reads, 0, sizeof(hd->reads));
-
- strlcpy(SD(sh)->vendor, &buff[8], sizeof(SD(sh)->vendor));
- strlcpy(SD(sh)->name, &buff[16], sizeof(SD(sh)->name));
- SD(sh)->revision[0] = buff[32];
- SD(sh)->revision[1] = buff[33];
- SD(sh)->revision[2] = buff[34];
- SD(sh)->revision[3] = '.';
- SD(sh)->revision[4] = buff[35];
- SD(sh)->revision[5] = 0;
-
- switch (be32_to_cpu(gc->len)) {
- case 0x1c:
- SD(sh)->EATA_revision = 'a';
- break;
- case 0x1e:
- SD(sh)->EATA_revision = 'b';
- break;
- case 0x22:
- SD(sh)->EATA_revision = 'c';
- break;
- case 0x24:
- SD(sh)->EATA_revision = 'z';
- break;
- default:
- SD(sh)->EATA_revision = '?';
- }
-
- if (be32_to_cpu(gc->len) >= 0x22) {
- if (gc->is_PCI)
- hd->bustype = IS_PCI;
- else if (gc->is_EISA)
- hd->bustype = IS_EISA;
- else
- hd->bustype = IS_ISA;
- } else {
- if (buff[21] == '4')
- hd->bustype = IS_PCI;
- else if (buff[21] == '2')
- hd->bustype = IS_EISA;
- else
- hd->bustype = IS_ISA;
- }
-
- SD(sh)->cplen = cplen;
- SD(sh)->cppadlen = cppadlen;
- SD(sh)->hostid = gc->scsi_id[3];
- SD(sh)->devflags = 1 << gc->scsi_id[3];
- SD(sh)->moresupport = gc->MORE_support;
- sh->unique_id = base;
- sh->base = base;
- sh->io_port = base;
- sh->n_io_port = 9;
- sh->irq = gc->IRQ;
- sh->dma_channel = PIO;
- sh->this_id = gc->scsi_id[3];
- sh->can_queue = 1;
- sh->cmd_per_lun = 1;
- sh->sg_tablesize = SG_ALL;
-
- hd->channel = 0;
-
- hd->pdev = pci_dev_get(pdev); /* Keep a PCI reference */
-
- sh->max_id = 8;
- sh->max_lun = 8;
-
- if (gc->SECOND)
- hd->primary = 0;
- else
- hd->primary = 1;
-
- hd->next = NULL; /* build a linked list of all HBAs */
- hd->prev = last_HBA;
- if (hd->prev != NULL)
- SD(hd->prev)->next = sh;
- last_HBA = sh;
- if (first_HBA == NULL)
- first_HBA = sh;
- registered_HBAs++;
- return (1);
-}
-
-static void find_pio_ISA(struct get_conf *buf)
-{
- int i;
-
- for (i = 0; i < MAXISA; i++) {
- if (!ISAbases[i])
- continue;
- if (!get_pio_conf_PIO(ISAbases[i], buf))
- continue;
- if (!register_pio_HBA(ISAbases[i], buf, NULL))
- release_region(ISAbases[i], 9);
- else
- ISAbases[i] = 0;
- }
- return;
-}
-
-static void find_pio_EISA(struct get_conf *buf)
-{
- u32 base;
- int i;
-
-#ifdef CHECKPAL
- u8 pal1, pal2, pal3;
-#endif
-
- for (i = 0; i < MAXEISA; i++) {
- if (EISAbases[i]) { /* Still a possibility ? */
-
- base = 0x1c88 + (i * 0x1000);
-#ifdef CHECKPAL
- pal1 = inb((u16) base - 8);
- pal2 = inb((u16) base - 7);
- pal3 = inb((u16) base - 6);
-
- if (((pal1 == 0x12) && (pal2 == 0x14)) || ((pal1 == 0x38) && (pal2 == 0xa3) && (pal3 == 0x82)) || ((pal1 == 0x06) && (pal2 == 0x94) && (pal3 == 0x24))) {
- DBG(DBG_PROBE, printk(KERN_NOTICE "EISA EATA id tags found: " "%x %x %x \n", (int) pal1, (int) pal2, (int) pal3));
-#endif
- if (get_pio_conf_PIO(base, buf)) {
- DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
- if (buf->IRQ) {
- if (!register_pio_HBA(base, buf, NULL))
- release_region(base, 9);
- } else {
- printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n");
- release_region(base, 9);
- }
- }
- /* Nothing found here so we take it from the list */
- EISAbases[i] = 0;
-#ifdef CHECKPAL
- }
-#endif
- }
- }
- return;
-}
-
-static void find_pio_PCI(struct get_conf *buf)
-{
-#ifndef CONFIG_PCI
- printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
-#else
- struct pci_dev *dev = NULL;
- unsigned long base, x;
-
- while ((dev = pci_get_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
- DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", pci_name(dev)));
- if (pci_enable_device(dev))
- continue;
- pci_set_master(dev);
- base = pci_resource_flags(dev, 0);
- if (base & IORESOURCE_MEM) {
- printk("eata_pio: invalid base address of device %s\n", pci_name(dev));
- continue;
- }
- base = pci_resource_start(dev, 0);
- /* EISA tag there ? */
- if ((inb(base) == 0x12) && (inb(base + 1) == 0x14))
- continue; /* Jep, it's forced, so move on */
- base += 0x10; /* Now, THIS is the real address */
- if (base != 0x1f8) {
- /* We didn't find it in the primary search */
- if (get_pio_conf_PIO(base, buf)) {
- if (buf->FORCADR) { /* If the address is forced */
- release_region(base, 9);
- continue; /* we'll find it later */
- }
-
- /* OK. We made it till here, so we can go now
- * and register it. We only have to check and
- * eventually remove it from the EISA and ISA list
- */
-
- if (!register_pio_HBA(base, buf, dev)) {
- release_region(base, 9);
- continue;
- }
-
- if (base < 0x1000) {
- for (x = 0; x < MAXISA; ++x) {
- if (ISAbases[x] == base) {
- ISAbases[x] = 0;
- break;
- }
- }
- } else if ((base & 0x0fff) == 0x0c88) {
- x = (base >> 12) & 0x0f;
- EISAbases[x] = 0;
- }
- }
-#ifdef CHECK_BLINK
- else if (check_blink_state(base)) {
- printk("eata_pio: HBA is in BLINK state.\n" "Consult your HBAs manual to correct this.\n");
- }
-#endif
- }
- }
-#endif /* #ifndef CONFIG_PCI */
-}
-
-static int eata_pio_detect(struct scsi_host_template *tpnt)
-{
- struct Scsi_Host *HBA_ptr;
- struct get_conf gc;
- int i;
-
- find_pio_PCI(&gc);
- find_pio_EISA(&gc);
- find_pio_ISA(&gc);
-
- for (i = 0; i < MAXIRQ; i++)
- if (reg_IRQ[i])
- request_irq(i, do_eata_pio_int_handler, 0, "EATA-PIO", NULL);
-
- HBA_ptr = first_HBA;
-
- if (registered_HBAs != 0) {
- printk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
- "(c) 1993-95 Michael Neuffer, neuffer@goofy.zdv.uni-mainz.de\n" " Alfred Arnold, a.arnold@kfa-juelich.de\n" "This release only supports DASD devices (harddisks)\n", VER_MAJOR, VER_MINOR, VER_SUB);
-
- printk("Registered HBAs:\n");
- printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n");
- for (i = 1; i <= registered_HBAs; i++) {
- printk("scsi%-2d: %.10s v%s 2.0%c %s %#.4lx %2d %d %d %c"
- " %2d %2d %2d\n",
- HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
- SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ?
- "PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ",
- HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id,
- SD(HBA_ptr)->primary ? 'Y' : 'N', HBA_ptr->can_queue,
- HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun);
- HBA_ptr = SD(HBA_ptr)->next;
- }
- }
- return (registered_HBAs);
-}
-
-static struct scsi_host_template driver_template = {
- .proc_name = "eata_pio",
- .name = "EATA (Extended Attachment) PIO driver",
- .show_info = eata_pio_show_info,
- .detect = eata_pio_detect,
- .release = eata_pio_release,
- .queuecommand = eata_pio_queue,
- .eh_abort_handler = eata_pio_abort,
- .eh_host_reset_handler = eata_pio_host_reset,
- .use_clustering = ENABLE_CLUSTERING,
-};
-
-MODULE_AUTHOR("Michael Neuffer, Alfred Arnold");
-MODULE_DESCRIPTION("EATA SCSI PIO driver");
-MODULE_LICENSE("GPL");
-
-#include "scsi_module.c"
deleted file mode 100644
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/********************************************************
-* Header file for eata_pio.c Linux EATA-PIO SCSI driver *
-* (c) 1993-96 Michael Neuffer *
-*********************************************************
-* last change: 2002/11/02 *
-********************************************************/
-
-
-#ifndef _EATA_PIO_H
-#define _EATA_PIO_H
-
-#define VER_MAJOR 0
-#define VER_MINOR 0
-#define VER_SUB "1b"
-
-/************************************************************************
- * Here you can switch parts of the code on and of *
- ************************************************************************/
-
-#define VERBOSE_SETUP /* show startup screen of 2001 */
-#define ALLOW_DMA_BOARDS 1
-
-/************************************************************************
- * Debug options. *
- * Enable DEBUG and whichever options you require. *
- ************************************************************************/
-#define DEBUG_EATA 1 /* Enable debug code. */
-#define DPT_DEBUG 0 /* Bobs special */
-#define DBG_DELAY 0 /* Build in delays so debug messages can be
- * be read before they vanish of the top of
- * the screen!
- */
-#define DBG_PROBE 0 /* Debug probe routines. */
-#define DBG_ISA 0 /* Trace ISA routines */
-#define DBG_EISA 0 /* Trace EISA routines */
-#define DBG_PCI 0 /* Trace PCI routines */
-#define DBG_PIO 0 /* Trace get_config_PIO */
-#define DBG_COM 0 /* Trace command call */
-#define DBG_QUEUE 0 /* Trace command queueing. */
-#define DBG_INTR 0 /* Trace interrupt service routine. */
-#define DBG_INTR2 0 /* Trace interrupt service routine. */
-#define DBG_PROC 0 /* Debug proc-fs related statistics */
-#define DBG_PROC_WRITE 0
-#define DBG_REGISTER 0 /* */
-#define DBG_ABNORM 1 /* Debug abnormal actions (reset, abort) */
-
-#if DEBUG_EATA
-#define DBG(x, y) if ((x)) {y;}
-#else
-#define DBG(x, y)
-#endif
-
-#endif /* _EATA_PIO_H */
Remove support for EATA and EATA-PIO SCSI host adapters. These devices are ancient and, apparently, nobody is still using them. https://lkml.kernel.org/r/20180313090540.GA4810%20()%20infradead%20!%20org Signed-off-by: Salvatore Mesoraca <s.mesoraca16@gmail.com> --- Documentation/scsi/scsi-parameters.txt | 2 - MAINTAINERS | 6 - drivers/scsi/Kconfig | 62 - drivers/scsi/Makefile | 2 - drivers/scsi/eata.c | 2571 -------------------------------- drivers/scsi/eata_generic.h | 401 ----- drivers/scsi/eata_pio.c | 966 ------------ drivers/scsi/eata_pio.h | 54 - 8 files changed, 4064 deletions(-) delete mode 100644 drivers/scsi/eata.c delete mode 100644 drivers/scsi/eata_generic.h delete mode 100644 drivers/scsi/eata_pio.c delete mode 100644 drivers/scsi/eata_pio.h