| Message ID | 1683133352-10046-1-git-send-email-quic_mojha@quicinc.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On 03/05/2023 19:02, Mukesh Ojha wrote: > Minidump is a best effort mechanism to collect useful and predefined data > for first level of debugging on end user devices running on Qualcomm SoCs. > It is built on the premise that System on Chip (SoC) or subsystem part of > SoC crashes, due to a range of hardware and software bugs. Hence, the > ability to collect accurate data is only a best-effort. The data collected > could be invalid or corrupted, data collection itself could fail, and so on. You organized the patch in a way making it very hard for us to review. I see mixed remoteproc, then soc, then defconfig (!!!), then remote proc, then soc, then bindings (! they must be before usage...), then dts (which should be the last), then soc then dts then... You see the point. Bindings, docs, changes organized by subsystem. Then DTS as separate patchset with a link to this one. If you have bisectability issues then it's a hint something is wrongly organized or done and must be fixed anyway. Best regards, Krzysztof
On Wed, 03 May 2023 22:32:14 +0530, Mukesh Ojha wrote: > Minidump is a best effort mechanism to collect useful and predefined data > for first level of debugging on end user devices running on Qualcomm SoCs. > It is built on the premise that System on Chip (SoC) or subsystem part of > SoC crashes, due to a range of hardware and software bugs. Hence, the > ability to collect accurate data is only a best-effort. The data collected > could be invalid or corrupted, data collection itself could fail, and so on. > > [...] Applied, thanks! [01/18] remoteproc: qcom: Expand MD_* as MINIDUMP_* commit: 318da1371246fdc1806011a27138175cfb078687 Best regards,
On Sat, Jul 15, 2023 at 03:13:34PM -0700, Bjorn Andersson wrote: > > On Wed, 03 May 2023 22:32:14 +0530, Mukesh Ojha wrote: > > Minidump is a best effort mechanism to collect useful and predefined data > > for first level of debugging on end user devices running on Qualcomm SoCs. > > It is built on the premise that System on Chip (SoC) or subsystem part of > > SoC crashes, due to a range of hardware and software bugs. Hence, the > > ability to collect accurate data is only a best-effort. The data collected > > could be invalid or corrupted, data collection itself could fail, and so on. > > > > [...] > > Applied, thanks! > > [01/18] remoteproc: qcom: Expand MD_* as MINIDUMP_* > commit: 318da1371246fdc1806011a27138175cfb078687 > Krzysztof asked for modifications on this patch. > Best regards, > -- > Bjorn Andersson <andersson@kernel.org>
On 17/07/2023 03:15, Mathieu Poirier wrote: > On Sat, Jul 15, 2023 at 03:13:34PM -0700, Bjorn Andersson wrote: >> >> On Wed, 03 May 2023 22:32:14 +0530, Mukesh Ojha wrote: >>> Minidump is a best effort mechanism to collect useful and predefined data >>> for first level of debugging on end user devices running on Qualcomm SoCs. >>> It is built on the premise that System on Chip (SoC) or subsystem part of >>> SoC crashes, due to a range of hardware and software bugs. Hence, the >>> ability to collect accurate data is only a best-effort. The data collected >>> could be invalid or corrupted, data collection itself could fail, and so on. >>> >>> [...] >> >> Applied, thanks! >> >> [01/18] remoteproc: qcom: Expand MD_* as MINIDUMP_* >> commit: 318da1371246fdc1806011a27138175cfb078687 >> > > Krzysztof asked for modifications on this patch. I guess it is fine, no big issue. Best regards, Krzysztof
On Sun, Jul 16, 2023 at 07:15:57PM -0600, Mathieu Poirier wrote: > On Sat, Jul 15, 2023 at 03:13:34PM -0700, Bjorn Andersson wrote: > > > > On Wed, 03 May 2023 22:32:14 +0530, Mukesh Ojha wrote: > > > Minidump is a best effort mechanism to collect useful and predefined data > > > for first level of debugging on end user devices running on Qualcomm SoCs. > > > It is built on the premise that System on Chip (SoC) or subsystem part of > > > SoC crashes, due to a range of hardware and software bugs. Hence, the > > > ability to collect accurate data is only a best-effort. The data collected > > > could be invalid or corrupted, data collection itself could fail, and so on. > > > > > > [...] > > > > Applied, thanks! > > > > [01/18] remoteproc: qcom: Expand MD_* as MINIDUMP_* > > commit: 318da1371246fdc1806011a27138175cfb078687 > > > > Krzysztof asked for modifications on this patch. > Krzysztof pointed out that there was no reason to trivially modify the defines and then immediately start moving things around. I agree with this, but as the consensus was that the rest of the series needs more work, I find this to be a sensible cleanup, getting rid of the cryptic "MD_" abbreviation. Regards, Bjorn
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c index 0d2209c..767e84a 100644 --- a/drivers/watchdog/qcom-wdt.c +++ b/drivers/watchdog/qcom-wdt.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/watchdog.h> #include <linux/of_device.h> +#include <linux/panic.h> enum wdt_reg { WDT_RST, @@ -114,12 +115,28 @@ static int qcom_wdt_set_pretimeout(struct watchdog_device *wdd, return qcom_wdt_start(wdd); } +static void qcom_wdt_bite_on_panic(struct qcom_wdt *wdt) +{ + writel(0, wdt_addr(wdt, WDT_EN)); + writel(1, wdt_addr(wdt, WDT_BITE_TIME)); + writel(1, wdt_addr(wdt, WDT_RST)); + writel(QCOM_WDT_ENABLE, wdt_addr(wdt, WDT_EN)); + + wmb(); + + while(1) + udelay(1); +} + static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action, void *data) { struct qcom_wdt *wdt = to_qcom_wdt(wdd); u32 timeout; + if (in_panic) + qcom_wdt_bite_on_panic(wdt); + /* * Trigger watchdog bite: * Setup BITE_TIME to be 128ms, and enable WDT. diff --git a/include/linux/panic.h b/include/linux/panic.h index 979b776..f913629 100644 --- a/include/linux/panic.h +++ b/include/linux/panic.h @@ -22,6 +22,7 @@ extern int panic_on_oops; extern int panic_on_unrecovered_nmi; extern int panic_on_io_nmi; extern int panic_on_warn; +extern bool in_panic; extern unsigned long panic_on_taint; extern bool panic_on_taint_nousertaint; diff --git a/kernel/panic.c b/kernel/panic.c index 487f5b0..714f7f4 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -65,6 +65,8 @@ static unsigned int warn_limit __read_mostly; int panic_timeout = CONFIG_PANIC_TIMEOUT; EXPORT_SYMBOL_GPL(panic_timeout); +bool in_panic = false; +EXPORT_SYMBOL_GPL(in_panic); #define PANIC_PRINT_TASK_INFO 0x00000001 #define PANIC_PRINT_MEM_INFO 0x00000002 @@ -261,6 +263,7 @@ void panic(const char *fmt, ...) int old_cpu, this_cpu; bool _crash_kexec_post_notifiers = crash_kexec_post_notifiers; + in_panic = true; if (panic_on_warn) { /* * This thread may hit another WARN() in the panic path.
Minidump is a best effort mechanism to collect useful and predefined data for first level of debugging on end user devices running on Qualcomm SoCs. It is built on the premise that System on Chip (SoC) or subsystem part of SoC crashes, due to a range of hardware and software bugs. Hence, the ability to collect accurate data is only a best-effort. The data collected could be invalid or corrupted, data collection itself could fail, and so on. Qualcomm devices in engineering mode provides a mechanism for generating full system ramdumps for post mortem debugging. But in some cases it's however not feasible to capture the entire content of RAM. The minidump mechanism provides the means for selecting which snippets should be included in the ramdump. The core of minidump feature is part of Qualcomm's boot firmware code. It initializes shared memory (SMEM), which is a part of DDR and allocates a small section of SMEM to minidump table i.e also called global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has their own table of segments to be included in the minidump and all get their reference from G-ToC. Each segment/region has some details like name, physical address and it's size etc. and it could be anywhere scattered in the DDR. Existing upstream Qualcomm remoteproc driver[1] already supports minidump feature for remoteproc instances like ADSP, MODEM, ... where predefined selective segments of subsystem region can be dumped as part of coredump collection which generates smaller size artifacts compared to complete coredump of subsystem on crash. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/drivers/remoteproc/qcom_common.c#n142 In addition to managing and querying the APSS minidump description, the Linux driver maintains a ELF header in a segment. This segment gets updated with section/program header whenever a new entry gets registered. Patch 1/18 is very trivial change. Patch 2/18 moves the minidump specific data structure and macro to qcom_minidump.h so that (4/18) qcom minidump driver can use. Patch 3/18 documents qualcomm minidump guide for users. Patch 4/18 implements qualcomm minidump kernel driver and exports symbol which other minidump kernel client can use. Patch 5/18 add pending region support for the clients who came for registration before minidump. Patch 6/18 add update region support for registered clients. Patch 7/18 enables the qualcomm minidump driver. Patch 8/18 Use the exported symbol from minidump driver in qcom_common for querying minidump descriptor for a subsystem. Patch 9-13 add qcom dynamic ramoops region support via a driver which adds ramoops platform device and also register existing pstore frontend regions. Patch 14-18 are not new and has already been through 6 versions and reason of adding here is for minidump testing purpose and it will be rebased automatically along with new version of minidump series. Testing of the patches has been done on sm8450 target after enabling config like CONFIG_PSTORE_RAM and CONFIG_PSTORE_CONSOLE and once the device boots up. Try crashing it via devmem2 0xf11c000(this is known to create xpu violation and and put the device in download mode) on command prompt. I have added download patch here numbered from 14/18 to 18/18 Earlier download mode setting patches were sent separately https://lore.kernel.org/lkml/1680076012-10785-1-git-send-email-quic_mojha@quicinc.com/ Default storage type is set to via USB, so minidump would be downloaded with the help of x86_64 machine (running PCAT tool) attached to Qualcomm device which has backed minidump boot firmware support (more can be found patch 3/18) Below patch [1] is to warm reset Qualcomm device which has upstream qcom watchdog driver support. After applying all patches, we can boot the device and can execute following command. echo mini > /sys/module/qcom_scm/parameters/download_mode echo c > /proc/sysrq-trigger This will make the device go to download mode and collect the minidump on to the attached x86 machine running the Qualcomm PCAT tool(This comes as part Qualcomm package manager kit). After that we will see a bunch of predefined registered region as binary blobs files starts with md_* downloaded on the x86 machine on given location in PCAT tool from the target device. A sample client example to dump a linux region has been given in patch 3/18 and as well as can be seen in patch 12/18. [1] --------------------------->8------------------------------------- commit f1124ccebd47550b4c9627aa162d9cdceba2b76f Author: Mukesh Ojha <quic_mojha@quicinc.com> Date: Thu Mar 16 14:08:35 2023 +0530 do not merge: watchdog bite on panic Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> -------------------------------------------------------------------------- Changes in v3: - Addressed most of the comments by Srini on v2 and refactored the minidump driver. - Added platform device support - Unregister region support. - Added update region for clients. - Added pending region support. - Modified the documentation guide accordingly. - Added qcom_pstore_ramdump client driver which happen to add ramoops platform device and also registers ramoops region with minidump. - Added download mode patch series with this minidump series. https://lore.kernel.org/lkml/1680076012-10785-1-git-send-email-quic_mojha@quicinc.com/ Changes in v2: https://lore.kernel.org/lkml/1679491817-2498-1-git-send-email-quic_mojha@quicinc.com/ - Addressed review comment made by [quic_tsoni/bmasney] to add documentation. - Addressed comments made by [srinivas.kandagatla] - Dropped pstore 6/6 from the last series, till i get conclusion to get pstore region in minidump. - Fixed issue reported by kernel test robot. Changes in v1: https://lore.kernel.org/lkml/1676978713-7394-1-git-send-email-quic_mojha@quicinc.com/ Mukesh Ojha (18): remoteproc: qcom: Expand MD_* as MINIDUMP_* remoteproc: qcom: Move minidump specific data to qcom_minidump.h docs: qcom: Add qualcomm minidump guide soc: qcom: Add Qualcomm minidump kernel driver soc: qcom: minidump: Add pending region registration support soc: qcom: minidump: Add update region support arm64: defconfig: Enable Qualcomm minidump driver remoterproc: qcom: refactor to leverage exported minidump symbol soc: qcom: Add qcom's pstore minidump driver support dt-bindings: reserved-memory: Add qcom,ramoops-minidump binding arm64: dts: qcom: sm8450: Add Qualcomm ramoops minidump node soc: qcom: Register pstore frontend region with minidump arm64: defconfig: Enable Qualcomm pstore minidump client driver firmware: qcom_scm: provide a read-modify-write function pinctrl: qcom: Use qcom_scm_io_update_field() firmware: scm: Modify only the download bits in TCSR register firmware: qcom_scm: Refactor code to support multiple download mode firmware: qcom_scm: Add multiple download mode support Documentation/admin-guide/qcom_minidump.rst | 246 +++++++ .../reserved-memory/qcom,ramoops-minidump.yaml | 69 ++ arch/arm64/boot/dts/qcom/sm8450.dtsi | 11 + arch/arm64/configs/defconfig | 2 + drivers/firmware/Kconfig | 11 - drivers/firmware/qcom_scm.c | 88 ++- drivers/pinctrl/qcom/pinctrl-msm.c | 11 +- drivers/remoteproc/qcom_common.c | 75 +-- drivers/soc/qcom/Kconfig | 25 + drivers/soc/qcom/Makefile | 2 + drivers/soc/qcom/qcom_minidump.c | 724 +++++++++++++++++++++ drivers/soc/qcom/qcom_pstore_minidump.c | 194 ++++++ drivers/soc/qcom/smem.c | 8 + include/linux/firmware/qcom/qcom_scm.h | 2 + include/soc/qcom/qcom_minidump.h | 130 ++++ 15 files changed, 1503 insertions(+), 95 deletions(-) create mode 100644 Documentation/admin-guide/qcom_minidump.rst create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,ramoops-minidump.yaml create mode 100644 drivers/soc/qcom/qcom_minidump.c create mode 100644 drivers/soc/qcom/qcom_pstore_minidump.c create mode 100644 include/soc/qcom/qcom_minidump.h