@@ -4,7 +4,7 @@
*
* Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
**-----------------------------------------------------------------------------
-**
+**
**
**-----------------------------------------------------------------------------
*/
@@ -18,7 +18,7 @@
*
* The 700 is the lowliest of the line, it can only do async SCSI.
* The 700-66 can at least do synchronous SCSI up to 10MHz.
- *
+ *
* The 700 chip has no host bus interface logic of its own. However,
* it is usually mapped to a location with well defined register
* offsets. Therefore, if you can determine the base address and the
@@ -61,7 +61,7 @@
* consistent memory allocation.
*
* Version 2.5
- *
+ *
* More Compatibility changes for 710 (now actually works). Enhanced
* support for odd clock speeds which constrain SDTR negotiations.
* correct cacheline separation for scsi messages and status for
@@ -70,7 +70,7 @@
*
* Version 2.4
*
- * Added support for the 53c710 chip (in 53c700 emulation mode only---no
+ * Added support for the 53c710 chip (in 53c700 emulation mode only---no
* special 53c710 instructions or registers are used).
*
* Version 2.3
@@ -190,7 +190,7 @@ static char *NCR_700_condition[] = {
"DISCONNECT_MSG RECEIVED",
"MSG_OUT",
"DATA_IN",
-
+
};
static char *NCR_700_fatal_messages[] = {
@@ -260,7 +260,7 @@ NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata,
static inline __u8
NCR_700_get_SXFER(struct scsi_device *SDp)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
return NCR_700_offset_period_to_sxfer(hostdata,
@@ -416,7 +416,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
int
NCR_700_release(struct Scsi_Host *host)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)host->hostdata[0];
if (hostdata->noncoherent)
@@ -449,7 +449,7 @@ NCR_700_identify(int can_disconnect, __u8 lun)
* Inputs : host - SCSI host */
static inline int
NCR_700_data_residual (struct Scsi_Host *host) {
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)host->hostdata[0];
int count, synchronous = 0;
unsigned int ddir;
@@ -461,16 +461,16 @@ NCR_700_data_residual (struct Scsi_Host *host) {
count = ((NCR_700_readb(host, DFIFO_REG) & 0x3f) -
(NCR_700_readl(host, DBC_REG) & 0x3f)) & 0x3f;
}
-
+
if(hostdata->fast)
synchronous = NCR_700_readb(host, SXFER_REG) & 0x0f;
-
+
/* get the data direction */
ddir = NCR_700_readb(host, CTEST0_REG) & 0x01;
if (ddir) {
/* Receive */
- if (synchronous)
+ if (synchronous)
count += (NCR_700_readb(host, SSTAT2_REG) & 0xf0) >> 4;
else
if (NCR_700_readb(host, SSTAT1_REG) & SIDL_REG_FULL)
@@ -500,7 +500,7 @@ sbcl_to_string(__u8 sbcl)
ret[0]='\0';
for(i=0; i<8; i++) {
- if((1<<i) & sbcl)
+ if((1<<i) & sbcl)
strcat(ret, NCR_700_SBCL_bits[i]);
}
strcat(ret, NCR_700_SBCL_to_phase[sbcl & 0x07]);
@@ -533,7 +533,7 @@ find_empty_slot(struct NCR_700_Host_Parameters *hostdata)
if(slot->state != NCR_700_SLOT_FREE)
/* should panic! */
printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");
-
+
hostdata->free_list = slot->ITL_forw;
slot->ITL_forw = NULL;
@@ -546,11 +546,11 @@ find_empty_slot(struct NCR_700_Host_Parameters *hostdata)
slot->state = NCR_700_SLOT_BUSY;
slot->flags = 0;
hostdata->command_slot_count++;
-
+
return slot;
}
-STATIC void
+STATIC void
free_slot(struct NCR_700_command_slot *slot,
struct NCR_700_Host_Parameters *hostdata)
{
@@ -560,7 +560,7 @@ free_slot(struct NCR_700_command_slot *slot,
if(slot->state == NCR_700_SLOT_FREE) {
printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);
}
-
+
slot->resume_offset = 0;
slot->cmnd = NULL;
slot->state = NCR_700_SLOT_FREE;
@@ -654,7 +654,7 @@ NCR_700_internal_bus_reset(struct Scsi_Host *host)
STATIC void
NCR_700_chip_setup(struct Scsi_Host *host)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)host->hostdata[0];
__u8 min_period;
__u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
@@ -694,11 +694,11 @@ NCR_700_chip_setup(struct Scsi_Host *host)
} else {
NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
host, DMODE_700_REG);
- NCR_700_writeb(hostdata->differential ?
+ NCR_700_writeb(hostdata->differential ?
DIFF : 0, host, CTEST7_REG);
if(hostdata->fast) {
/* this is for 700-66, does nothing on 700 */
- NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION
+ NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION
| GENERATE_RECEIVE_PARITY, host,
CTEST8_REG);
} else {
@@ -731,7 +731,7 @@ NCR_700_chip_setup(struct Scsi_Host *host)
NCR_700_writeb(ASYNC_DIV_3_0 | hostdata->dcntl_extra, host, DCNTL_REG);
hostdata->sync_clock = hostdata->clock*2;
hostdata->sync_clock /= 3;
-
+
} else if(hostdata->clock > 37 && hostdata->clock <= 50) {
/* sync divider 1, async divider 2 */
DEBUG(("53c700: sync 1 async 2\n"));
@@ -764,7 +764,7 @@ NCR_700_chip_setup(struct Scsi_Host *host)
STATIC void
NCR_700_chip_reset(struct Scsi_Host *host)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)host->hostdata[0];
if(hostdata->chip710) {
NCR_700_writeb(SOFTWARE_RESET_710, host, ISTAT_REG);
@@ -774,7 +774,7 @@ NCR_700_chip_reset(struct Scsi_Host *host)
} else {
NCR_700_writeb(SOFTWARE_RESET, host, DCNTL_REG);
udelay(100);
-
+
NCR_700_writeb(0, host, DCNTL_REG);
}
@@ -790,7 +790,7 @@ NCR_700_chip_reset(struct Scsi_Host *host)
* ACK) so that the routine returns correctly to resume its activity
* */
STATIC __u32
-process_extended_message(struct Scsi_Host *host,
+process_extended_message(struct Scsi_Host *host,
struct NCR_700_Host_Parameters *hostdata,
struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
{
@@ -816,15 +816,15 @@ process_extended_message(struct Scsi_Host *host,
spi_offset(starget) = offset;
spi_period(starget) = period;
-
+
if(NCR_700_is_flag_set(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION)) {
spi_display_xfer_agreement(starget);
NCR_700_clear_flag(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION);
}
-
+
NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
-
+
NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
host, SXFER_REG);
@@ -841,7 +841,7 @@ process_extended_message(struct Scsi_Host *host,
resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
}
break;
-
+
case A_WDTR_MSG:
printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n",
host->host_no, pun, lun);
@@ -1121,7 +1121,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
SCp = scsi_host_find_tag(SDp->host, hostdata->msgin[2]);
if(unlikely(SCp == NULL)) {
- printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
+ printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
host->host_no, reselection_id, lun, hostdata->msgin[2]);
BUG();
}
@@ -1180,7 +1180,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
slot->cmnd->cmd_len);
-
+
}
} else if(dsps == A_RESELECTED_DURING_SELECTION) {
@@ -1193,10 +1193,10 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
__u8 reselection_id = NCR_700_readb(host, SFBR_REG);
struct NCR_700_command_slot *slot;
-
+
/* Take out our own ID */
reselection_id &= ~(1<<host->this_id);
-
+
/* I've never seen this happen, so keep this as a printk rather
* than a debug */
printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n",
@@ -1222,7 +1222,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
slot->state = NCR_700_SLOT_QUEUED;
}
hostdata->cmd = NULL;
-
+
if(reselection_id == 0) {
if(hostdata->reselection_id == 0xff) {
printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);
@@ -1233,7 +1233,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
reselection_id = hostdata->reselection_id;
}
} else {
-
+
/* convert to real ID */
reselection_id = bitmap_to_number(reselection_id);
}
@@ -1251,7 +1251,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
* a return here will re-run the queued command slot
* that may have been interrupted by the initial selection */
DEBUG((" SELECTION COMPLETED\n"));
- } else if((dsps & 0xfffff0f0) == A_MSG_IN) {
+ } else if((dsps & 0xfffff0f0) == A_MSG_IN) {
resume_offset = process_message(host, hostdata, SCp,
dsp, dsps);
} else if((dsps & 0xfffff000) == 0) {
@@ -1304,7 +1304,7 @@ process_selection(struct Scsi_Host *host, __u32 dsp)
/* Take out our own ID */
id &= ~(1<<host->this_id);
- if(id != 0)
+ if(id != 0)
break;
udelay(5);
}
@@ -1322,7 +1322,7 @@ process_selection(struct Scsi_Host *host, __u32 dsp)
struct NCR_700_command_slot *slot =
(struct NCR_700_command_slot *)SCp->host_scribble;
DEBUG((" ID %d WARNING: RESELECTION OF BUSY HOST, saving cmd %p, slot %p, addr %x [%04x], resume %x!\n", id, hostdata->cmd, slot, dsp, dsp - hostdata->pScript, resume_offset));
-
+
switch(dsp - hostdata->pScript) {
case Ent_Disconnect1:
case Ent_Disconnect2:
@@ -1344,7 +1344,7 @@ process_selection(struct Scsi_Host *host, __u32 dsp)
case Ent_Finish2:
process_script_interrupt(A_GOOD_STATUS_AFTER_STATUS, dsp, SCp, host, hostdata);
break;
-
+
default:
slot->state = NCR_700_SLOT_QUEUED;
break;
@@ -1547,7 +1547,7 @@ NCR_700_intr(int irq, void *dev_id)
/* clear all the negotiated parameters */
__shost_for_each_device(SDp, host)
NCR_700_clear_flag(SDp, ~0);
-
+
/* clear all the slots and their pending commands */
for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
struct scsi_cmnd *SCp;
@@ -1556,7 +1556,7 @@ NCR_700_intr(int irq, void *dev_id)
if(slot->state == NCR_700_SLOT_FREE)
continue;
-
+
SCp = slot->cmnd;
printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",
slot, SCp);
@@ -1620,7 +1620,7 @@ NCR_700_intr(int irq, void *dev_id)
data_transfer += residual;
if(data_transfer != 0) {
- int count;
+ int count;
__u32 pAddr;
SGcount--;
@@ -1680,7 +1680,7 @@ NCR_700_intr(int irq, void *dev_id)
NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
}
-
+
/* NOTE: selection interrupt processing MUST occur
* after script interrupt processing to correctly cope
* with the case where we process a disconnect and
@@ -1718,7 +1718,7 @@ NCR_700_intr(int irq, void *dev_id)
DEBUG(("Attempting to resume at %x\n", resume_offset));
NCR_700_clear_fifo(host);
NCR_700_writel(resume_offset, host, DSP_REG);
- }
+ }
/* There is probably a technical no-no about this: If we're a
* shared interrupt and we got this interrupt because the
* other device needs servicing not us, we're still going to
@@ -1732,7 +1732,7 @@ NCR_700_intr(int irq, void *dev_id)
* position we left off */
int j = (i + hostdata->saved_slot_position)
% NCR_700_COMMAND_SLOTS_PER_HOST;
-
+
if(hostdata->slots[j].state != NCR_700_SLOT_QUEUED)
continue;
if(NCR_700_start_command(hostdata->slots[j].cmnd)) {
@@ -1752,7 +1752,7 @@ NCR_700_intr(int irq, void *dev_id)
static int NCR_700_queuecommand_lck(struct scsi_cmnd *SCp)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
__u32 move_ins;
struct NCR_700_command_slot *slot;
@@ -1852,7 +1852,7 @@ static int NCR_700_queuecommand_lck(struct scsi_cmnd *SCp)
default:
printk(KERN_ERR "53c700: Unknown command for data direction ");
scsi_print_command(SCp);
-
+
move_ins = 0;
break;
case DMA_NONE:
@@ -1937,7 +1937,7 @@ STATIC int
NCR_700_host_reset(struct scsi_cmnd * SCp)
{
DECLARE_COMPLETION_ONSTACK(complete);
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
scmd_printk(KERN_INFO, SCp,
@@ -1975,9 +1975,9 @@ STATIC void
NCR_700_set_period(struct scsi_target *STp, int period)
{
struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SHp->hostdata[0];
-
+
if(!hostdata->fast)
return;
@@ -1994,11 +1994,11 @@ STATIC void
NCR_700_set_offset(struct scsi_target *STp, int offset)
{
struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SHp->hostdata[0];
int max_offset = hostdata->chip710
? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET;
-
+
if(!hostdata->fast)
return;
@@ -2031,7 +2031,7 @@ NCR_700_slave_alloc(struct scsi_device *SDp)
STATIC int
NCR_700_slave_configure(struct scsi_device *SDp)
{
- struct NCR_700_Host_Parameters *hostdata =
+ struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
/* to do here: allocate memory; build a queue_full list */
Since 5a602de99797b ("Add .editorconfig file for basic formatting") my editor has been forced to remove trailing whitespace from any file it saves. Instead of fighting this recent kernel default, let's start chipping away at fixing the issues. Signed-off-by: Lee Jones <lee@kernel.org> --- Cc: Richard Hirst <rhirst@linuxcare.com> --- drivers/scsi/53c700.c | 102 +++++++++++++++++++++--------------------- 1 file changed, 51 insertions(+), 51 deletions(-)