@@ -1012,6 +1012,81 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_slave_sg(struct dma_chan
return NULL;
}
+static struct dma_async_tx_descriptor *stm32_dma3_prep_dma_cyclic(struct dma_chan *c,
+ dma_addr_t buf_addr,
+ size_t buf_len, size_t period_len,
+ enum dma_transfer_direction dir,
+ unsigned long flags)
+{
+ struct stm32_dma3_chan *chan = to_stm32_dma3_chan(c);
+ struct stm32_dma3_swdesc *swdesc;
+ dma_addr_t src, dst;
+ u32 count, i, ctr1, ctr2;
+ int ret;
+
+ if (!buf_len || !period_len || period_len > STM32_DMA3_MAX_BLOCK_SIZE) {
+ dev_err(chan2dev(chan), "Invalid buffer/period length\n");
+ return NULL;
+ }
+
+ if (buf_len % period_len) {
+ dev_err(chan2dev(chan), "Buffer length not multiple of period length\n");
+ return NULL;
+ }
+
+ count = buf_len / period_len;
+ swdesc = stm32_dma3_chan_desc_alloc(chan, count);
+ if (!swdesc)
+ return NULL;
+
+ if (dir == DMA_MEM_TO_DEV) {
+ src = buf_addr;
+ dst = chan->dma_config.dst_addr;
+
+ ret = stm32_dma3_chan_prep_hw(chan, DMA_MEM_TO_DEV, &swdesc->ccr, &ctr1, &ctr2,
+ src, dst, period_len);
+ } else if (dir == DMA_DEV_TO_MEM) {
+ src = chan->dma_config.src_addr;
+ dst = buf_addr;
+
+ ret = stm32_dma3_chan_prep_hw(chan, DMA_DEV_TO_MEM, &swdesc->ccr, &ctr1, &ctr2,
+ src, dst, period_len);
+ } else {
+ dev_err(chan2dev(chan), "Invalid direction\n");
+ ret = -EINVAL;
+ }
+
+ if (ret)
+ goto err_desc_free;
+
+ for (i = 0; i < count; i++) {
+ if (dir == DMA_MEM_TO_DEV) {
+ src = buf_addr + i * period_len;
+ dst = chan->dma_config.dst_addr;
+ } else { /* (dir == DMA_DEV_TO_MEM || dir == DMA_MEM_TO_MEM) */
+ src = chan->dma_config.src_addr;
+ dst = buf_addr + i * period_len;
+ }
+
+ stm32_dma3_chan_prep_hwdesc(chan, swdesc, i, src, dst, period_len,
+ ctr1, ctr2, i == (count - 1), true);
+ }
+
+ /* Enable Error interrupts */
+ swdesc->ccr |= CCR_USEIE | CCR_ULEIE | CCR_DTEIE;
+ /* Enable Transfer state interrupts */
+ swdesc->ccr |= CCR_TCIE;
+
+ swdesc->cyclic = true;
+
+ return vchan_tx_prep(&chan->vchan, &swdesc->vdesc, flags);
+
+err_desc_free:
+ stm32_dma3_chan_desc_free(chan, swdesc);
+
+ return NULL;
+}
+
static void stm32_dma3_caps(struct dma_chan *c, struct dma_slave_caps *caps)
{
struct stm32_dma3_chan *chan = to_stm32_dma3_chan(c);
@@ -1246,6 +1321,7 @@ static int stm32_dma3_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
+ dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask);
dma_dev->dev = &pdev->dev;
/*
* This controller supports up to 8-byte buswidth depending on the port used and the
@@ -1268,6 +1344,7 @@ static int stm32_dma3_probe(struct platform_device *pdev)
dma_dev->device_alloc_chan_resources = stm32_dma3_alloc_chan_resources;
dma_dev->device_free_chan_resources = stm32_dma3_free_chan_resources;
dma_dev->device_prep_slave_sg = stm32_dma3_prep_slave_sg;
+ dma_dev->device_prep_dma_cyclic = stm32_dma3_prep_dma_cyclic;
dma_dev->device_caps = stm32_dma3_caps;
dma_dev->device_config = stm32_dma3_config;
dma_dev->device_terminate_all = stm32_dma3_terminate_all;
Add DMA_CYCLIC capability and relative device_prep_dma_cyclic ops with stm32_dma3_prep_dma_cyclic(). It reuses stm32_dma3_chan_prep_hw() and stm32_dma3_chan_prep_hwdesc() helpers. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> --- drivers/dma/stm32/stm32-dma3.c | 77 ++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)