diff mbox series

[v2,4/6] arm/dts: Add initial support for Galaxy Tab 2 7.0

Message ID 20241030211847.413-2-bavishimithil@gmail.com (mailing list archive)
State Superseded
Headers show
Series Initial support for Samsung Galaxy Tab 2 series | expand

Commit Message

Mithil Bavishi Oct. 30, 2024, 9:18 p.m. UTC 
Create a device tree for the 3 inch variants (P3100, P3110, P3113)

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/Makefile            |  1 +
 .../dts/ti/omap/omap4-samsung-espresso7.dts   | 70 +++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts

Comments

Krzysztof Kozlowski Oct. 31, 2024, 8:19 a.m. UTC | #1 
On Wed, Oct 30, 2024 at 09:18:44PM +0000, Mithil Bavishi wrote:
> Create a device tree for the 3 inch variants (P3100, P3110, P3113)

3 inch variants of what? Describe here the hardware.

> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> ---

Please use subject prefixes matching the subsystem. You can get them for
example with 'git log --oneline -- DIRECTORY_OR_FILE' on the directory
your patch is touching. For bindings, the preferred subjects are
explained here:
https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters


>  arch/arm/boot/dts/ti/omap/Makefile            |  1 +
>  .../dts/ti/omap/omap4-samsung-espresso7.dts   | 70 +++++++++++++++++++
>  2 files changed, 71 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 95c68135d..a5bbf4b34 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -76,6 +76,7 @@  dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
+	omap4-samsung-espresso7.dtb \
 	omap4-sdp.dtb \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
new file mode 100644
index 000000000..9049d412a
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
@@ -0,0 +1,70 @@ 
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 2 (7 inch)";
+	compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 1200 0>;
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <2>;
+	};
+
+	panel {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd>;
+		width-mm = <154>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <47255554>;
+
+			hback-porch = <210>;
+			hactive = <1024>;
+			hfront-porch = <186>;
+			hsync-len = <50>;
+
+			vback-porch = <11>;
+			vactive = <600>;
+			vfront-porch = <24>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+			syncclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen@48 {
+		compatible = "melfas,mms136";
+		reg = <0x48>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1023>;
+		touchscreen-size-y = <599>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		avdd-supply = <&reg_touch_ldo_en>;
+		vdd-supply = <&ldo6>;
+	};
+};