| Message ID | 1459278791-3646-6-git-send-email-tthayer@opensource.altera.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, 29 Mar 2016, tthayer@opensource.altera.com wrote: > From: Thor Thayer <tthayer@opensource.altera.com> > > Add the Altera Arria10 System Resource node. This is a Multi-Function > device with GPIO and HWMON support. > > Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> > > + spi1: spi@ffda5000 { > + compatible = "snps,dw-apb-ssi"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xffda5000 0x100>; > + interrupts = <0 102 4>; > + num-chipselect = <4>; > + bus-num = <0>; > + /*32bit_access;*/ > + tx-dma-channel = <&pdma 16>; > + rx-dma-channel = <&pdma 17>; > + clocks = <&spi_m_clk>; > + status = "disabled"; > + }; > + I think you need to split this into 2 patches, 1 for adding the SPI nodes, and the 2nd for adding the slave device. BR, Dinh -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/30/2016 12:42 PM, Dinh Nguyen wrote: > On Tue, 29 Mar 2016, tthayer@opensource.altera.com wrote: > >> From: Thor Thayer <tthayer@opensource.altera.com> >> >> Add the Altera Arria10 System Resource node. This is a Multi-Function >> device with GPIO and HWMON support. >> >> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> >> >> + spi1: spi@ffda5000 { >> + compatible = "snps,dw-apb-ssi"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0xffda5000 0x100>; >> + interrupts = <0 102 4>; >> + num-chipselect = <4>; >> + bus-num = <0>; >> + /*32bit_access;*/ >> + tx-dma-channel = <&pdma 16>; >> + rx-dma-channel = <&pdma 17>; >> + clocks = <&spi_m_clk>; >> + status = "disabled"; >> + }; >> + > > I think you need to split this into 2 patches, 1 for adding the SPI nodes, and > the 2nd for adding the slave device. > > BR, > Dinh > OK. Thanks for reviewing. -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 1c5e139..069b0a0 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -563,6 +563,21 @@ status = "disabled"; }; + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x100>; + interrupts = <0 102 4>; + num-chipselect = <4>; + bus-num = <0>; + /*32bit_access;*/ + tx-dma-channel = <&pdma 16>; + rx-dma-channel = <&pdma 17>; + clocks = <&spi_m_clk>; + status = "disabled"; + }; + sdr: sdr@ffc25000 { compatible = "syscon"; reg = <0xffcfb100 0x80>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 567df98..095fd72 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -70,6 +70,23 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + a10_sysres: a10_sysres@0 { + compatible = "altr,altr-a10sr"; + reg = <0>; + spi-max-frequency = <1000000>; + + a10sr_gpio: a10sr_gpio { + compatible = "altr,a10sr-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <16>; + }; + }; +}; + &i2c1 { speed-mode = <0>; status = "okay";