diff mbox

hwmon: (max6650.c) Add devicetree support documentation

Message ID 1471332190-14638-1-git-send-email-mike.looijmans@topic.nl (mailing list archive)
State Changes Requested
Headers show

Commit Message

Mike Looijmans Aug. 16, 2016, 7:23 a.m. UTC
This adds the devicetree binding documentation for the max6650 fan
controller.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
Associated code changes sent as a separate patch as requested.

 .../devicetree/bindings/hwmon/max6650.txt          | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt

Comments

Rob Herring Aug. 18, 2016, 7:11 p.m. UTC | #1
On Tue, Aug 16, 2016 at 09:23:10AM +0200, Mike Looijmans wrote:
> This adds the devicetree binding documentation for the max6650 fan
> controller.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> Associated code changes sent as a separate patch as requested.
> 
>  .../devicetree/bindings/hwmon/max6650.txt          | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/max6650.txt

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
new file mode 100644
index 0000000..2e46e69
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/max6650.txt
@@ -0,0 +1,23 @@ 
+Bindings for MAX6651 and MAX6650 I2C fan controllers
+
+Reference:
+[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+Required properties:
+- compatible : One of "maxim,max6650" or "maxim,max6651"
+- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
+
+Optional properties, default is to retain the chip's current setting:
+- maxim,fan-microvolt : The supply voltage of the fan, sets the ADC range to
+			either 5V or 12V. Max value 13500000.
+- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
+			allow more fine-grained control of slower fans.
+			Valid: 1, 2, 4, 8, 16.
+
+Example:
+	fan-max6650: max6650@1b {
+		reg = <0x1b>;
+		compatible = "maxim,max6650";
+		maxim,fan-microvolt = <12000000>;
+		maxim,fan-prescale = <4>;
+	};