From patchwork Thu Mar 15 22:21:55 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Eddie James X-Patchwork-Id: 10285853 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 6DBCD60621 for ; Thu, 15 Mar 2018 22:22:21 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 4CB1628C3B for ; Thu, 15 Mar 2018 22:22:21 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 414C628C8A; Thu, 15 Mar 2018 22:22:21 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id A584A28C3B for ; Thu, 15 Mar 2018 22:22:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932704AbeCOWWI (ORCPT ); Thu, 15 Mar 2018 18:22:08 -0400 Received: from mx0b-001b2d01.pphosted.com ([148.163.158.5]:41876 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932691AbeCOWWF (ORCPT ); Thu, 15 Mar 2018 18:22:05 -0400 Received: from pps.filterd (m0098419.ppops.net [127.0.0.1]) by mx0b-001b2d01.pphosted.com (8.16.0.22/8.16.0.22) with SMTP id w2FMJKuY040941 for ; Thu, 15 Mar 2018 18:22:05 -0400 Received: from e11.ny.us.ibm.com (e11.ny.us.ibm.com [129.33.205.201]) by mx0b-001b2d01.pphosted.com with ESMTP id 2gr0k9t78c-1 (version=TLSv1.2 cipher=AES256-SHA256 bits=256 verify=NOT) for ; Thu, 15 Mar 2018 18:22:04 -0400 Received: from localhost by e11.ny.us.ibm.com with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted for from ; Thu, 15 Mar 2018 18:22:04 -0400 Received: from b01cxnp23032.gho.pok.ibm.com (9.57.198.27) by e11.ny.us.ibm.com (146.89.104.198) with IBM ESMTP SMTP Gateway: Authorized Use Only! Violators will be prosecuted; Thu, 15 Mar 2018 18:22:01 -0400 Received: from b01ledav006.gho.pok.ibm.com (b01ledav006.gho.pok.ibm.com [9.57.199.111]) by b01cxnp23032.gho.pok.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id w2FMM05R43516146; Thu, 15 Mar 2018 22:22:00 GMT Received: from b01ledav006.gho.pok.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id C7A47AC03A; Thu, 15 Mar 2018 18:23:16 -0400 (EDT) Received: from talon7.ibm.com (unknown [9.41.241.240]) by b01ledav006.gho.pok.ibm.com (Postfix) with ESMTP id 020C7AC041; Thu, 15 Mar 2018 18:23:15 -0400 (EDT) From: Eddie James To: linux-hwmon@vger.kernel.org Cc: linux-kernel@vger.kernel.org, jdelvare@suse.com, linux@roeck-us.net, joel@jms.id.au, andy.shevchenko@gmail.com, Christopher Bostic , Andrew Jeffery , Eddie James Subject: [PATCH v5 1/2] hwmon: (ucd9000) Add gpio chip interface Date: Thu, 15 Mar 2018 17:21:55 -0500 X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1521152516-10829-1-git-send-email-eajames@linux.vnet.ibm.com> References: <1521152516-10829-1-git-send-email-eajames@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 18031522-2213-0000-0000-000002805868 X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00008681; HX=3.00000241; KW=3.00000007; PH=3.00000004; SC=3.00000254; SDB=6.01003584; UDB=6.00510758; IPR=6.00782910; MB=3.00020057; MTD=3.00000008; XFM=3.00000015; UTC=2018-03-15 22:22:03 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 18031522-2214-0000-0000-0000596D377A Message-Id: <1521152516-10829-2-git-send-email-eajames@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:, , definitions=2018-03-15_11:, , signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 malwarescore=0 suspectscore=1 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1709140000 definitions=main-1803150244 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Christopher Bostic Add a struct gpio_chip and define some methods so that this device's I/O can be accessed via /sys/class/gpio. Signed-off-by: Christopher Bostic Signed-off-by: Andrew Jeffery Signed-off-by: Eddie James --- drivers/hwmon/pmbus/ucd9000.c | 201 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index b74dbec..a34ffc4 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "pmbus.h" enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 }; @@ -35,8 +36,18 @@ #define UCD9000_NUM_PAGES 0xd6 #define UCD9000_FAN_CONFIG_INDEX 0xe7 #define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_GPIO_SELECT 0xfa +#define UCD9000_GPIO_CONFIG 0xfb #define UCD9000_DEVICE_ID 0xfd +/* GPIO CONFIG bits */ +#define UCD9000_GPIO_CONFIG_ENABLE BIT(0) +#define UCD9000_GPIO_CONFIG_OUT_ENABLE BIT(1) +#define UCD9000_GPIO_CONFIG_OUT_VALUE BIT(2) +#define UCD9000_GPIO_CONFIG_STATUS BIT(3) +#define UCD9000_GPIO_INPUT 0 +#define UCD9000_GPIO_OUTPUT 1 + #define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07) #define UCD9000_MON_PAGE(x) ((x) & 0x0f) @@ -47,9 +58,15 @@ #define UCD9000_NUM_FAN 4 +#define UCD9000_GPIO_NAME_LEN 16 +#define UCD9090_NUM_GPIOS 23 +#define UCD901XX_NUM_GPIOS 26 +#define UCD90910_NUM_GPIOS 26 + struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; struct pmbus_driver_info info; + struct gpio_chip gpio; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) @@ -149,6 +166,188 @@ static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg) }; MODULE_DEVICE_TABLE(of, ucd9000_of_match); +static int ucd9000_gpio_read_config(struct i2c_client *client, + unsigned int offset) +{ + int ret; + + /* No page set required */ + ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_SELECT, offset); + if (ret < 0) + return ret; + + return i2c_smbus_read_byte_data(client, UCD9000_GPIO_CONFIG); +} + +static int ucd9000_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct i2c_client *client = gpiochip_get_data(gc); + int ret; + + ret = ucd9000_gpio_read_config(client, offset); + if (ret < 0) + return ret; + + return !!(ret & UCD9000_GPIO_CONFIG_STATUS); +} + +static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct i2c_client *client = gpiochip_get_data(gc); + int ret; + + ret = ucd9000_gpio_read_config(client, offset); + if (ret < 0) { + dev_dbg(&client->dev, "failed to read GPIO %d config: %d\n", + offset, ret); + return; + } + + if (value) { + if (ret & UCD9000_GPIO_CONFIG_STATUS) + return; + + ret |= UCD9000_GPIO_CONFIG_STATUS; + } else { + if (!(ret & UCD9000_GPIO_CONFIG_STATUS)) + return; + + ret &= ~UCD9000_GPIO_CONFIG_STATUS; + } + + ret |= UCD9000_GPIO_CONFIG_ENABLE; + + /* Page set not required */ + ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret); + if (ret < 0) { + dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n", + offset, ret); + return; + } + + ret &= ~UCD9000_GPIO_CONFIG_ENABLE; + + ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret); + if (ret < 0) + dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n", + offset, ret); +} + +static int ucd9000_gpio_get_direction(struct gpio_chip *gc, + unsigned int offset) +{ + struct i2c_client *client = gpiochip_get_data(gc); + int ret; + + ret = ucd9000_gpio_read_config(client, offset); + if (ret < 0) + return ret; + + return !(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE); +} + +static int ucd9000_gpio_set_direction(struct gpio_chip *gc, + unsigned int offset, bool direction_out, + int requested_out) +{ + struct i2c_client *client = gpiochip_get_data(gc); + int ret, config, out_val; + + ret = ucd9000_gpio_read_config(client, offset); + if (ret < 0) + return ret; + + if (direction_out) { + out_val = requested_out ? UCD9000_GPIO_CONFIG_OUT_VALUE : 0; + + if (ret & UCD9000_GPIO_CONFIG_OUT_ENABLE) { + if ((ret & UCD9000_GPIO_CONFIG_OUT_VALUE) == out_val) + return 0; + } else { + ret |= UCD9000_GPIO_CONFIG_OUT_ENABLE; + } + + if (out_val) + ret |= UCD9000_GPIO_CONFIG_OUT_VALUE; + else + ret &= ~UCD9000_GPIO_CONFIG_OUT_VALUE; + + } else { + if (!(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE)) + return 0; + + ret &= ~UCD9000_GPIO_CONFIG_OUT_ENABLE; + } + + ret |= UCD9000_GPIO_CONFIG_ENABLE; + config = ret; + + /* Page set not required */ + ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config); + if (ret < 0) + return ret; + + config &= ~UCD9000_GPIO_CONFIG_ENABLE; + + return i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config); +} + +static int ucd9000_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_INPUT, 0); +} + +static int ucd9000_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int val) +{ + return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_OUTPUT, + val); +} + +static void ucd9000_probe_gpio(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + int rc; + + switch (mid->driver_data) { + case ucd9090: + data->gpio.ngpio = UCD9090_NUM_GPIOS; + break; + case ucd90120: + case ucd90124: + case ucd90160: + data->gpio.ngpio = UCD901XX_NUM_GPIOS; + break; + case ucd90910: + data->gpio.ngpio = UCD90910_NUM_GPIOS; + break; + default: + return; /* GPIO support is optional. */ + } + + /* + * Pinmux support has not been added to the new gpio_chip. + * This support should be added when possible given the mux + * behavior of these IO devices. + */ + data->gpio.label = client->name; + data->gpio.get_direction = ucd9000_gpio_get_direction; + data->gpio.direction_input = ucd9000_gpio_direction_input; + data->gpio.direction_output = ucd9000_gpio_direction_output; + data->gpio.get = ucd9000_gpio_get; + data->gpio.set = ucd9000_gpio_set; + data->gpio.can_sleep = true; + data->gpio.base = -1; + data->gpio.parent = &client->dev; + + rc = devm_gpiochip_add_data(&client->dev, &data->gpio, client); + if (rc) + dev_warn(&client->dev, "Could not add gpiochip: %d\n", rc); +} + static int ucd9000_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -263,6 +462,8 @@ static int ucd9000_probe(struct i2c_client *client, | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34; } + ucd9000_probe_gpio(client, mid, data); + return pmbus_do_probe(client, mid, info); }