| Message ID | 1521152516-10829-3-git-send-email-eajames@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On 03/15/2018 03:21 PM, Eddie James wrote: > From: Christopher Bostic <cbostic@linux.vnet.ibm.com> > > Expose the gpiN_fault fields of mfr_status as individual debugfs > attributes. This provides a way for users to be easily notified of gpi > faults. Also provide the whole mfr_status register in debugfs. > > Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au> > Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> > --- > drivers/hwmon/pmbus/ucd9000.c | 137 +++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 136 insertions(+), 1 deletion(-) > > diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c > index a34ffc4..c1a1560 100644 > --- a/drivers/hwmon/pmbus/ucd9000.c > +++ b/drivers/hwmon/pmbus/ucd9000.c > @@ -19,6 +19,7 @@ > * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > */ > > +#include <linux/debugfs.h> > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/of_device.h> > @@ -36,6 +37,7 @@ > #define UCD9000_NUM_PAGES 0xd6 > #define UCD9000_FAN_CONFIG_INDEX 0xe7 > #define UCD9000_FAN_CONFIG 0xe8 > +#define UCD9000_MFR_STATUS 0xf3 > #define UCD9000_GPIO_SELECT 0xfa > #define UCD9000_GPIO_CONFIG 0xfb > #define UCD9000_DEVICE_ID 0xfd > @@ -63,13 +65,22 @@ > #define UCD901XX_NUM_GPIOS 26 > #define UCD90910_NUM_GPIOS 26 > > +#define UCD9000_DEBUGFS_NAME_LEN 24 > +#define UCD9000_GPI_COUNT 8 > + > struct ucd9000_data { > u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; > struct pmbus_driver_info info; > struct gpio_chip gpio; > + struct dentry *debugfs; > }; > #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) > > +struct ucd9000_debugfs_entry { > + struct i2c_client *client; > + u8 index; > +}; > + > static int ucd9000_get_fan_config(struct i2c_client *client, int fan) > { > int fan_config = 0; > @@ -306,6 +317,121 @@ static int ucd9000_gpio_direction_output(struct gpio_chip *gc, > val); > } > > +#ifdef CONFIG_DEBUG_FS > +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) > +{ > + int ret = pmbus_set_page(client, 0); > + > + if (ret < 0) > + return ret; > + > + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); > +} > + > +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) > +{ > + struct ucd9000_debugfs_entry *entry = data; > + struct i2c_client *client = entry->client; > + u8 buffer[I2C_SMBUS_BLOCK_MAX]; > + int ret; > + > + ret = ucd9000_get_mfr_status(client, buffer); > + if (ret < 0) > + return ret; > + > + /* > + * Attribute only created for devices with gpi fault bits at bits > + * 16-23, which is the second byte of the response. > + */ > + *val = !!(buffer[1] & BIT(entry->index)); > + > + return 0; > +} > +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, > + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); > + > +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, > + char __user *buf, size_t count, > + loff_t *ppos) > +{ > + struct i2c_client *client = file->private_data; > + u8 buffer[I2C_SMBUS_BLOCK_MAX] = { 0 }; > + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2] = { 0 }; Is it still necessary to initialize these variables ? > + char *res; > + int rc; > + > + rc = ucd9000_get_mfr_status(client, buffer); > + if (rc < 0) > + return rc; > + > + res = bin2hex(str, buffer, rc); Please add some limit here, such as res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX)); > + *res++ = '\n'; > + > + return simple_read_from_buffer(buf, count, ppos, str, (res - str) + 1); > +} > + > +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { > + .llseek = noop_llseek, > + .read = ucd9000_debugfs_read_mfr_status, > + .open = simple_open, > +}; > + > +static int ucd9000_init_debugfs(struct i2c_client *client, > + const struct i2c_device_id *mid, > + struct ucd9000_data *data) > +{ > + struct dentry *debugfs; > + struct ucd9000_debugfs_entry *entries; > + int i; > + char name[UCD9000_DEBUGFS_NAME_LEN]; > + > + debugfs = pmbus_get_debugfs_dir(client); > + if (!debugfs) > + return -ENOENT; > + > + data->debugfs = debugfs_create_dir(client->name, debugfs); > + if (!data->debugfs) > + return -ENOENT; > + > + /* > + * Of the chips this driver supports, only the UCD9090, UCD90160, > + * and UCD90910 report GPI faults in their MFR_STATUS register, so only > + * create the GPI fault debugfs attributes for those chips. > + */ > + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || > + mid->driver_data == ucd90910) { > + entries = devm_kzalloc(&client->dev, > + sizeof(*entries) * UCD9000_GPI_COUNT, > + GFP_KERNEL); > + if (!entries) > + return -ENOMEM; > + > + for (i = 0; i < UCD9000_GPI_COUNT; i++) { > + entries[i].client = client; > + entries[i].index = i; > + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, > + "gpi%d_alarm", i + 1); > + debugfs_create_file(name, 0444, data->debugfs, > + &entries[i], > + &ucd9000_debugfs_mfr_status_bit); > + } > + } > + > + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); > + debugfs_create_file(name, 0444, data->debugfs, client, > + &ucd9000_debugfs_show_mfr_status_fops); > + > + return 0; > +} > +#else > +static int ucd9000_init_debugfs(struct i2c_client *client, > + const struct i2c_device_id *mid, > + struct ucd9000_data *data) > +{ > + return 0; > +} > +#endif /* CONFIG_DEBUG_FS */ > + > static void ucd9000_probe_gpio(struct i2c_client *client, > const struct i2c_device_id *mid, > struct ucd9000_data *data) > @@ -464,7 +590,16 @@ static int ucd9000_probe(struct i2c_client *client, > > ucd9000_probe_gpio(client, mid, data); > > - return pmbus_do_probe(client, mid, info); > + ret = pmbus_do_probe(client, mid, info); > + if (ret) > + return ret; > + > + ret = ucd9000_init_debugfs(client, mid, data); > + if (ret) > + dev_warn(&client->dev, "Failed to register debugfs: %d\n", > + ret); > + > + return 0; > } > > /* This is the driver that will be inserted */ > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index a34ffc4..c1a1560 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/debugfs.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_device.h> @@ -36,6 +37,7 @@ #define UCD9000_NUM_PAGES 0xd6 #define UCD9000_FAN_CONFIG_INDEX 0xe7 #define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_MFR_STATUS 0xf3 #define UCD9000_GPIO_SELECT 0xfa #define UCD9000_GPIO_CONFIG 0xfb #define UCD9000_DEVICE_ID 0xfd @@ -63,13 +65,22 @@ #define UCD901XX_NUM_GPIOS 26 #define UCD90910_NUM_GPIOS 26 +#define UCD9000_DEBUGFS_NAME_LEN 24 +#define UCD9000_GPI_COUNT 8 + struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; struct pmbus_driver_info info; struct gpio_chip gpio; + struct dentry *debugfs; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) +struct ucd9000_debugfs_entry { + struct i2c_client *client; + u8 index; +}; + static int ucd9000_get_fan_config(struct i2c_client *client, int fan) { int fan_config = 0; @@ -306,6 +317,121 @@ static int ucd9000_gpio_direction_output(struct gpio_chip *gc, val); } +#ifdef CONFIG_DEBUG_FS +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) +{ + int ret = pmbus_set_page(client, 0); + + if (ret < 0) + return ret; + + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); +} + +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) +{ + struct ucd9000_debugfs_entry *entry = data; + struct i2c_client *client = entry->client; + u8 buffer[I2C_SMBUS_BLOCK_MAX]; + int ret; + + ret = ucd9000_get_mfr_status(client, buffer); + if (ret < 0) + return ret; + + /* + * Attribute only created for devices with gpi fault bits at bits + * 16-23, which is the second byte of the response. + */ + *val = !!(buffer[1] & BIT(entry->index)); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); + +static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file, + char __user *buf, size_t count, + loff_t *ppos) +{ + struct i2c_client *client = file->private_data; + u8 buffer[I2C_SMBUS_BLOCK_MAX] = { 0 }; + char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2] = { 0 }; + char *res; + int rc; + + rc = ucd9000_get_mfr_status(client, buffer); + if (rc < 0) + return rc; + + res = bin2hex(str, buffer, rc); + *res++ = '\n'; + + return simple_read_from_buffer(buf, count, ppos, str, (res - str) + 1); +} + +static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = { + .llseek = noop_llseek, + .read = ucd9000_debugfs_read_mfr_status, + .open = simple_open, +}; + +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + struct dentry *debugfs; + struct ucd9000_debugfs_entry *entries; + int i; + char name[UCD9000_DEBUGFS_NAME_LEN]; + + debugfs = pmbus_get_debugfs_dir(client); + if (!debugfs) + return -ENOENT; + + data->debugfs = debugfs_create_dir(client->name, debugfs); + if (!data->debugfs) + return -ENOENT; + + /* + * Of the chips this driver supports, only the UCD9090, UCD90160, + * and UCD90910 report GPI faults in their MFR_STATUS register, so only + * create the GPI fault debugfs attributes for those chips. + */ + if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 || + mid->driver_data == ucd90910) { + entries = devm_kzalloc(&client->dev, + sizeof(*entries) * UCD9000_GPI_COUNT, + GFP_KERNEL); + if (!entries) + return -ENOMEM; + + for (i = 0; i < UCD9000_GPI_COUNT; i++) { + entries[i].client = client; + entries[i].index = i; + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, + "gpi%d_alarm", i + 1); + debugfs_create_file(name, 0444, data->debugfs, + &entries[i], + &ucd9000_debugfs_mfr_status_bit); + } + } + + scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status"); + debugfs_create_file(name, 0444, data->debugfs, client, + &ucd9000_debugfs_show_mfr_status_fops); + + return 0; +} +#else +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + return 0; +} +#endif /* CONFIG_DEBUG_FS */ + static void ucd9000_probe_gpio(struct i2c_client *client, const struct i2c_device_id *mid, struct ucd9000_data *data) @@ -464,7 +590,16 @@ static int ucd9000_probe(struct i2c_client *client, ucd9000_probe_gpio(client, mid, data); - return pmbus_do_probe(client, mid, info); + ret = pmbus_do_probe(client, mid, info); + if (ret) + return ret; + + ret = ucd9000_init_debugfs(client, mid, data); + if (ret) + dev_warn(&client->dev, "Failed to register debugfs: %d\n", + ret); + + return 0; } /* This is the driver that will be inserted */