| Message ID | 20161102025804.9215-1-mahoda.ratnayaka@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | Deferred |
| Headers | show |
On Wed, Nov 02, 2016 at 03:58:04PM +1300, Mahoda Ratnayaka wrote: > This patch adds lm87 hwmon device tree node documentation. > > Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> > --- > > Notes: > Changes since v1: > As suggested include all the changes are moved in > to the same patch and the all the optional properties > are now defined instead of using a single variable to > indicate those properties. > > Changes since v2: > Changed has-vcc-5v to use regulator binding and fixed > a minor copy paste mistake. > > Changes since v3: > Update the vcc-supply description. > > Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 0000000..e1b7990 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: a Phandle for the regulator supplying power, can be + cofigured to measure 5.0V power supply. Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +};
This patch adds lm87 hwmon device tree node documentation. Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> --- Notes: Changes since v1: As suggested include all the changes are moved in to the same patch and the all the optional properties are now defined instead of using a single variable to indicate those properties. Changes since v2: Changed has-vcc-5v to use regulator binding and fixed a minor copy paste mistake. Changes since v3: Update the vcc-supply description. Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt