diff mbox series

[v11,12/14] Documentation: hwmon: Add documents for PECI hwmon drivers

Message ID 20191211194624.2872-13-jae.hyun.yoo@linux.intel.com (mailing list archive)
State Not Applicable
Headers show
Series PECI device driver introduction | expand

Commit Message

Jae Hyun Yoo Dec. 11, 2019, 7:46 p.m. UTC 
This commit adds hwmon documents for PECI cputemp and dimmtemp drivers.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
Changes since v10:
- Changed documents format to rst.

 Documentation/hwmon/index.rst         |  2 +
 Documentation/hwmon/peci-cputemp.rst  | 95 +++++++++++++++++++++++++++
 Documentation/hwmon/peci-dimmtemp.rst | 60 +++++++++++++++++
 3 files changed, 157 insertions(+)
 create mode 100644 Documentation/hwmon/peci-cputemp.rst
 create mode 100644 Documentation/hwmon/peci-dimmtemp.rst
diff mbox series

Patch

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 43cc605741ea..8cb0265c8e9b 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -131,6 +131,8 @@  Hardware Monitoring Kernel Drivers
    pc87360
    pc87427
    pcf8591
+   peci-cputemp
+   peci-dimmtemp
    pmbus
    powr1220
    pxe1610
diff --git a/Documentation/hwmon/peci-cputemp.rst b/Documentation/hwmon/peci-cputemp.rst
new file mode 100644
index 000000000000..bf08e16dd989
--- /dev/null
+++ b/Documentation/hwmon/peci-cputemp.rst
@@ -0,0 +1,95 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver peci-cputemp
+==========================
+
+:Copyright: |copy| 2018-2019 Intel Corporation
+
+Supported chips:
+	One of Intel server CPUs listed below which is connected to a PECI bus.
+		* Intel Xeon E5/E7 v3 server processors
+			Intel Xeon E5-14xx v3 family
+			Intel Xeon E5-24xx v3 family
+			Intel Xeon E5-16xx v3 family
+			Intel Xeon E5-26xx v3 family
+			Intel Xeon E5-46xx v3 family
+			Intel Xeon E7-48xx v3 family
+			Intel Xeon E7-88xx v3 family
+		* Intel Xeon E5/E7 v4 server processors
+			Intel Xeon E5-16xx v4 family
+			Intel Xeon E5-26xx v4 family
+			Intel Xeon E5-46xx v4 family
+			Intel Xeon E7-48xx v4 family
+			Intel Xeon E7-88xx v4 family
+		* Intel Xeon Scalable server processors
+			Intel Xeon D family
+			Intel Xeon Bronze family
+			Intel Xeon Silver family
+			Intel Xeon Gold family
+			Intel Xeon Platinum family
+
+	Addresses scanned: PECI client address 0x30 - 0x37
+	Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are
+accessible using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+``sysfs`` interface
+-------------------
+======================= =======================================================
+temp1_label		"Die"
+temp1_input		Provides current die temperature of the CPU package.
+temp1_max		Provides thermal control temperature of the CPU package
+			which is also known as Tcontrol.
+temp1_crit		Provides shutdown temperature of the CPU package which
+			is also known as the maximum processor junction
+			temperature, Tjmax or Tprochot.
+temp1_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
+			the CPU package.
+
+temp2_label		"DTS"
+temp2_input		Provides current DTS temperature of the CPU package.
+temp2_max		Provides thermal control temperature of the CPU package
+			which is also known as Tcontrol.
+temp2_crit		Provides shutdown temperature of the CPU package which
+			is also known as the maximum processor junction
+			temperature, Tjmax or Tprochot.
+temp2_crit_hyst		Provides the hysteresis value from Tcontrol to Tjmax of
+			the CPU package.
+
+temp3_label		"Tcontrol"
+temp3_input		Provides current Tcontrol temperature of the CPU
+			package which is also known as Fan Temperature target.
+			Indicates the relative value from thermal monitor trip
+			temperature at which fans should be engaged.
+temp3_crit		Provides Tcontrol critical value of the CPU package
+			which is same to Tjmax.
+
+temp4_label		"Tthrottle"
+temp4_input		Provides current Tthrottle temperature of the CPU
+			package. Used for throttling temperature. If this value
+			is allowed and lower than Tjmax - the throttle will
+			occur and reported at lower than Tjmax.
+
+temp5_label		"Tjmax"
+temp5_input		Provides the maximum junction temperature, Tjmax of the
+			CPU package.
+
+temp[6-N]_label		Provides string "Core X", where X is resolved core
+			number.
+temp[6-N]_input		Provides current temperature of each core.
+temp[6-N]_max		Provides thermal control temperature of the core.
+temp[6-N]_crit		Provides shutdown temperature of the core.
+temp[6-N]_crit_hyst	Provides the hysteresis value from Tcontrol to Tjmax of
+			the core.
+======================= =======================================================
\ No newline at end of file
diff --git a/Documentation/hwmon/peci-dimmtemp.rst b/Documentation/hwmon/peci-dimmtemp.rst
new file mode 100644
index 000000000000..e3581811de2d
--- /dev/null
+++ b/Documentation/hwmon/peci-dimmtemp.rst
@@ -0,0 +1,60 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver peci-dimmtemp
+===========================
+
+:Copyright: |copy| 2018-2019 Intel Corporation
+
+Supported chips:
+	One of Intel server CPUs listed below which is connected to a PECI bus.
+		* Intel Xeon E5/E7 v3 server processors
+			Intel Xeon E5-14xx v3 family
+			Intel Xeon E5-24xx v3 family
+			Intel Xeon E5-16xx v3 family
+			Intel Xeon E5-26xx v3 family
+			Intel Xeon E5-46xx v3 family
+			Intel Xeon E7-48xx v3 family
+			Intel Xeon E7-88xx v3 family
+		* Intel Xeon E5/E7 v4 server processors
+			Intel Xeon E5-16xx v4 family
+			Intel Xeon E5-26xx v4 family
+			Intel Xeon E5-46xx v4 family
+			Intel Xeon E7-48xx v4 family
+			Intel Xeon E7-88xx v4 family
+		* Intel Xeon Scalable server processors
+			Intel Xeon D family
+			Intel Xeon Bronze family
+			Intel Xeon Silver family
+			Intel Xeon Gold family
+			Intel Xeon Platinum family
+
+	Addresses scanned: PECI client address 0x30 - 0x37
+	Datasheet: Available from http://www.intel.com/design/literature.htm
+
+Author:
+	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+Description
+-----------
+
+This driver implements a generic PECI hwmon feature which provides Digital
+Thermal Sensor (DTS) thermal readings of DIMM components that are accessible
+using the PECI Client Command Suite via the processor PECI client.
+
+All temperature values are given in millidegree Celsius and will be measurable
+only when the target CPU is powered on.
+
+``sysfs`` interface
+-------------------
+======================= =======================================================
+
+temp[N]_label		Provides string "DIMM CI", where C is DIMM channel and
+			I is DIMM index of the populated DIMM.
+temp[N]_input		Provides current temperature of the populated DIMM.
+temp[N]_max		Provides thermal control temperature of the DIMM.
+temp[N]_crit		Provides shutdown temperature of the DIMM.
+======================= =======================================================
+
+Note:
+	DIMM temperature attributes will appear when the client CPU's BIOS
+	completes memory training and testing.