@@ -246,6 +246,9 @@ config RENESAS_RZA1_IRQC
Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
to 8 external interrupts with configurable sense select.
+config SL28CPLD_INTC
+ bool
+
config ST_IRQCHIP
bool
select REGMAP
@@ -107,3 +107,4 @@ obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
obj-$(CONFIG_TI_SCI_INTA_IRQCHIP) += irq-ti-sci-inta.o
obj-$(CONFIG_LOONGSON_LIOINTC) += irq-loongson-liointc.o
obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o
+obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o
new file mode 100644
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sl28cpld interrupt controller driver.
+ *
+ * Copyright 2019 Kontron Europe GmbH
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define INTC_IE 0x00
+#define INTC_IP 0x01
+
+static const struct regmap_irq sl28cpld_irqs[] = {
+ REGMAP_IRQ_REG_LINE(0, 8),
+ REGMAP_IRQ_REG_LINE(1, 8),
+ REGMAP_IRQ_REG_LINE(2, 8),
+ REGMAP_IRQ_REG_LINE(3, 8),
+ REGMAP_IRQ_REG_LINE(4, 8),
+ REGMAP_IRQ_REG_LINE(5, 8),
+ REGMAP_IRQ_REG_LINE(6, 8),
+ REGMAP_IRQ_REG_LINE(7, 8),
+};
+
+struct sl28cpld_intc {
+ struct regmap *regmap;
+ struct regmap_irq_chip chip;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static int sl28cpld_intc_probe(struct platform_device *pdev)
+{
+ struct sl28cpld_intc *irqchip;
+ struct resource *res;
+ unsigned int irq;
+ int ret;
+
+ if (!pdev->dev.parent)
+ return -ENODEV;
+
+ irqchip = devm_kzalloc(&pdev->dev, sizeof(*irqchip), GFP_KERNEL);
+ if (!irqchip)
+ return -ENOMEM;
+
+ irqchip->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!irqchip->regmap)
+ return -ENODEV;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+ if (!res)
+ return -EINVAL;
+
+ irqchip->chip.name = "sl28cpld-intc";
+ irqchip->chip.irqs = sl28cpld_irqs;
+ irqchip->chip.num_irqs = ARRAY_SIZE(sl28cpld_irqs);
+ irqchip->chip.num_regs = 1;
+ irqchip->chip.status_base = res->start + INTC_IP;
+ irqchip->chip.mask_base = res->start + INTC_IE;
+ irqchip->chip.mask_invert = true,
+ irqchip->chip.ack_base = res->start + INTC_IP;
+
+ ret = devm_regmap_add_irq_chip(&pdev->dev, irqchip->regmap, irq,
+ IRQF_SHARED | IRQF_ONESHOT, 0,
+ &irqchip->chip, &irqchip->irq_data);
+ if (ret)
+ return ret;
+ dev_info(&pdev->dev, "registered IRQ %d\n", irq);
+
+ return 0;
+}
+
+static const struct platform_device_id sl28cpld_intc_id_table[] = {
+ { "sl28cpld-intc" },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, sl28cpld_intc_id_table);
+
+static struct platform_driver sl28cpld_intc_driver = {
+ .probe = sl28cpld_intc_probe,
+ .id_table = sl28cpld_intc_id_table,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ }
+};
+module_platform_driver(sl28cpld_intc_driver);
+
+MODULE_DESCRIPTION("sl28cpld Interrupt Controller Driver");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_LICENSE("GPL");
@@ -2064,6 +2064,8 @@ config MFD_SL28CPLD
depends on I2C=y
depends on OF
select REGMAP_I2C
+ select REGMAP_IRQ
+ select SL28CPLD_INTC
select MFD_CORE
help
This option enables support for the board management controller
This patch adds support for the interrupt controller inside the sl28 CPLD management controller. Signed-off-by: Michael Walle <michael@walle.cc> --- drivers/irqchip/Kconfig | 3 ++ drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-sl28cpld.c | 97 ++++++++++++++++++++++++++++++++++ drivers/mfd/Kconfig | 2 + 4 files changed, 103 insertions(+) create mode 100644 drivers/irqchip/irq-sl28cpld.c