| Message ID | 20200409202458.24509-1-robh@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | dt-bindings: Fix dtc warnings on reg and ranges in examples | expand |
On Thu, Apr 09, 2020 at 02:24:58PM -0600, Rob Herring wrote: > A recent update to dtc and changes to the default warnings introduced > some new warnings in the DT binding examples: > > Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61: > Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11: > Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54: > Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2) > Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11: > Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15: > Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11: > Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name > Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11: > Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11: > Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: "Nuno Sá" <nuno.sa@analog.com> > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Matt Mackall <mpm@selenic.com> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: bcm-kernel-feedback-list@broadcom.com > Cc: Mark Brown <broonie@kernel.org> > Cc: linux-hwmon@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net> > --- > Will take this via the DT tree. > > Rob > > .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 6 +++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- > .../nvidia,tegra186-mc.yaml | 41 +++++++++++-------- > .../devicetree/bindings/mfd/st,stpmic1.yaml | 2 +- > .../bindings/net/qcom,ipq8064-mdio.yaml | 1 + > .../devicetree/bindings/rng/brcm,bcm2835.yaml | 2 +- > .../bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +- > .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +- > 8 files changed, 35 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > index aa0738b4d534..e713a6fe4cf7 100644 > --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > @@ -42,6 +42,10 @@ properties: > description: > See section 2.3.9 of the DeviceTree Specification. > > + '#address-cells': true > + > + '#size-cells': true > + > required: > - "#interconnect-cells" > - compatible > @@ -59,6 +63,8 @@ examples: > compatible = "allwinner,sun5i-a13-mbus"; > reg = <0x01c01000 0x1000>; > clocks = <&ccu CLK_MBUS>; > + #address-cells = <1>; > + #size-cells = <1>; > dma-ranges = <0x00000000 0x40000000 0x20000000>; > #interconnect-cells = <1>; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > index 57a240d2d026..29bb2c778c59 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -47,7 +47,7 @@ required: > > examples: > - | > - fpga_axi: fpga-axi@0 { > + fpga_axi: fpga-axi { > #address-cells = <0x2>; > #size-cells = <0x1>; > > diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > index 12516bd89cf9..611bda38d187 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > @@ -97,30 +97,35 @@ examples: > #include <dt-bindings/clock/tegra186-clock.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - memory-controller@2c00000 { > - compatible = "nvidia,tegra186-mc"; > - reg = <0x0 0x02c00000 0x0 0xb0000>; > - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > - > + bus { > #address-cells = <2>; > #size-cells = <2>; > > - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; > + memory-controller@2c00000 { > + compatible = "nvidia,tegra186-mc"; > + reg = <0x0 0x02c00000 0x0 0xb0000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; > > - /* > - * Memory clients have access to all 40 bits that the memory > - * controller can address. > - */ > - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > + /* > + * Memory clients have access to all 40 bits that the memory > + * controller can address. > + */ > + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > > - external-memory-controller@2c60000 { > - compatible = "nvidia,tegra186-emc"; > - reg = <0x0 0x02c60000 0x0 0x50000>; > - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&bpmp TEGRA186_CLK_EMC>; > - clock-names = "emc"; > + external-memory-controller@2c60000 { > + compatible = "nvidia,tegra186-emc"; > + reg = <0x0 0x02c60000 0x0 0x50000>; > + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&bpmp TEGRA186_CLK_EMC>; > + clock-names = "emc"; > > - nvidia,bpmp = <&bpmp>; > + nvidia,bpmp = <&bpmp>; > + }; > }; > }; > > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > index d9ad9260e348..f88d13d70441 100644 > --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > @@ -274,7 +274,7 @@ examples: > - | > #include <dt-bindings/mfd/st,stpmic1.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > - i2c@0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > pmic@33 { > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > index b9f90081046f..67df3fe861ee 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > @@ -48,6 +48,7 @@ examples: > > switch@10 { > compatible = "qca,qca8337"; > + reg = <0x10>; > /* ... */ > }; > }; > diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > index 89ab67f20a7f..c147900f9041 100644 > --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > @@ -39,7 +39,7 @@ additionalProperties: false > > examples: > - | > - rng { > + rng@7e104000 { > compatible = "brcm,bcm2835-rng"; > reg = <0x7e104000 0x10>; > interrupts = <2 29>; > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > index 0cf470eaf2a0..5c16cf59ca00 100644 > --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > @@ -61,7 +61,7 @@ examples: > #include <dt-bindings/clock/qcom,gcc-sdm845.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - soc: soc@0 { > + soc: soc { > #address-cells = <2>; > #size-cells = <2>; > > diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > index 1d6877875077..c2d2ee43ba67 100644 > --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > @@ -56,7 +56,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/clock/jz4740-cgu.h> > - usb_phy: usb-phy@0 { > + usb_phy: usb-phy { > compatible = "usb-nop-xceiv"; > #phy-cells = <0>; > }; > -- > 2.20.1 >
On Thu 09 Apr 13:24 PDT 2020, Rob Herring wrote: > A recent update to dtc and changes to the default warnings introduced > some new warnings in the DT binding examples: > > Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61: > Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11: > Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54: > Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2) > Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11: > Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15: > Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11: > Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name > Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11: > Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11: > Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: "Nuno Sá" <nuno.sa@analog.com> > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Matt Mackall <mpm@selenic.com> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: bcm-kernel-feedback-list@broadcom.com > Cc: Mark Brown <broonie@kernel.org> > Cc: linux-hwmon@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > Will take this via the DT tree. > > Rob > > .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 6 +++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- > .../nvidia,tegra186-mc.yaml | 41 +++++++++++-------- > .../devicetree/bindings/mfd/st,stpmic1.yaml | 2 +- > .../bindings/net/qcom,ipq8064-mdio.yaml | 1 + > .../devicetree/bindings/rng/brcm,bcm2835.yaml | 2 +- > .../bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +- > .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +- > 8 files changed, 35 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > index aa0738b4d534..e713a6fe4cf7 100644 > --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml > @@ -42,6 +42,10 @@ properties: > description: > See section 2.3.9 of the DeviceTree Specification. > > + '#address-cells': true > + > + '#size-cells': true > + > required: > - "#interconnect-cells" > - compatible > @@ -59,6 +63,8 @@ examples: > compatible = "allwinner,sun5i-a13-mbus"; > reg = <0x01c01000 0x1000>; > clocks = <&ccu CLK_MBUS>; > + #address-cells = <1>; > + #size-cells = <1>; > dma-ranges = <0x00000000 0x40000000 0x20000000>; > #interconnect-cells = <1>; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > index 57a240d2d026..29bb2c778c59 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -47,7 +47,7 @@ required: > > examples: > - | > - fpga_axi: fpga-axi@0 { > + fpga_axi: fpga-axi { > #address-cells = <0x2>; > #size-cells = <0x1>; > > diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > index 12516bd89cf9..611bda38d187 100644 > --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml > @@ -97,30 +97,35 @@ examples: > #include <dt-bindings/clock/tegra186-clock.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - memory-controller@2c00000 { > - compatible = "nvidia,tegra186-mc"; > - reg = <0x0 0x02c00000 0x0 0xb0000>; > - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > - > + bus { > #address-cells = <2>; > #size-cells = <2>; > > - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; > + memory-controller@2c00000 { > + compatible = "nvidia,tegra186-mc"; > + reg = <0x0 0x02c00000 0x0 0xb0000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; > > - /* > - * Memory clients have access to all 40 bits that the memory > - * controller can address. > - */ > - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > + /* > + * Memory clients have access to all 40 bits that the memory > + * controller can address. > + */ > + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > > - external-memory-controller@2c60000 { > - compatible = "nvidia,tegra186-emc"; > - reg = <0x0 0x02c60000 0x0 0x50000>; > - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&bpmp TEGRA186_CLK_EMC>; > - clock-names = "emc"; > + external-memory-controller@2c60000 { > + compatible = "nvidia,tegra186-emc"; > + reg = <0x0 0x02c60000 0x0 0x50000>; > + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&bpmp TEGRA186_CLK_EMC>; > + clock-names = "emc"; > > - nvidia,bpmp = <&bpmp>; > + nvidia,bpmp = <&bpmp>; > + }; > }; > }; > > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > index d9ad9260e348..f88d13d70441 100644 > --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > @@ -274,7 +274,7 @@ examples: > - | > #include <dt-bindings/mfd/st,stpmic1.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > - i2c@0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > pmic@33 { > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > index b9f90081046f..67df3fe861ee 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > @@ -48,6 +48,7 @@ examples: > > switch@10 { > compatible = "qca,qca8337"; > + reg = <0x10>; > /* ... */ > }; > }; > diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > index 89ab67f20a7f..c147900f9041 100644 > --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > @@ -39,7 +39,7 @@ additionalProperties: false > > examples: > - | > - rng { > + rng@7e104000 { > compatible = "brcm,bcm2835-rng"; > reg = <0x7e104000 0x10>; > interrupts = <2 29>; > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > index 0cf470eaf2a0..5c16cf59ca00 100644 > --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > @@ -61,7 +61,7 @@ examples: > #include <dt-bindings/clock/qcom,gcc-sdm845.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - soc: soc@0 { > + soc: soc { > #address-cells = <2>; > #size-cells = <2>; > > diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > index 1d6877875077..c2d2ee43ba67 100644 > --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > @@ -56,7 +56,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/clock/jz4740-cgu.h> > - usb_phy: usb-phy@0 { > + usb_phy: usb-phy { > compatible = "usb-nop-xceiv"; > #phy-cells = <0>; > }; > -- > 2.20.1 >
On Thu, Apr 09, 2020 at 02:24:58PM -0600, Rob Herring wrote: > A recent update to dtc and changes to the default warnings introduced > some new warnings in the DT binding examples: > > Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61: > Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11: > Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54: > Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2) > Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11: > Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15: > Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11: > Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name > Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11: > Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11: > Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: "Nuno Sá" <nuno.sa@analog.com> > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Matt Mackall <mpm@selenic.com> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: bcm-kernel-feedback-list@broadcom.com > Cc: Mark Brown <broonie@kernel.org> > Cc: linux-hwmon@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Will take this via the DT tree. > > Rob > > .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 6 +++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- > .../nvidia,tegra186-mc.yaml | 41 +++++++++++-------- Acked-by: Thierry Reding <treding@nvidia.com>
> From: Rob Herring <robh@kernel.org> > Sent: Donnerstag, 9. April 2020 22:25 > To: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org; Maxime Ripard <mripard@kernel.org>; > Chen-Yu Tsai <wens@csie.org>; Sa, Nuno <Nuno.Sa@analog.com>; Jean > Delvare <jdelvare@suse.com>; Guenter Roeck <linux@roeck-us.net>; > Thierry Reding <thierry.reding@gmail.com>; Jonathan Hunter > <jonathanh@nvidia.com>; Lee Jones <lee.jones@linaro.org>; Bjorn > Andersson <bjorn.andersson@linaro.org>; David S. Miller > <davem@davemloft.net>; Matt Mackall <mpm@selenic.com>; Herbert Xu > <herbert@gondor.apana.org.au>; Nicolas Saenz Julienne > <nsaenzjulienne@suse.de>; Florian Fainelli <f.fainelli@gmail.com>; Ray Jui > <rjui@broadcom.com>; Scott Branden <sbranden@broadcom.com>; bcm- > kernel-feedback-list@broadcom.com; Mark Brown <broonie@kernel.org>; > linux-hwmon@vger.kernel.org; linux-tegra@vger.kernel.org; linux-arm- > msm@vger.kernel.org; netdev@vger.kernel.org; linux- > crypto@vger.kernel.org; linux-rpi-kernel@lists.infradead.org; linux- > spi@vger.kernel.org; linux-usb@vger.kernel.org > Subject: [PATCH] dt-bindings: Fix dtc warnings on reg and ranges in examples > > > A recent update to dtc and changes to the default warnings introduced > some new warnings in the DT binding examples: > > Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10- > mbus.example.dts:23.13-61: > Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma- > ranges: "dma-ranges" property has invalid length (12 bytes) (parent > #address-cells == 1, child #address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/hwmon/adi,axi-fan- > control.example.dts:17.22-28.11: > Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit > name, but no reg or ranges property > Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186- > mc.example.dts:34.13-54: > Warning (dma_ranges_format): /example-0/memory- > controller@2c00000:dma-ranges: "dma-ranges" property has invalid length > (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells > == 2) > Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15- > 79.11: > Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, > but no reg or ranges property > Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.example.dts:28.23-31.15: > Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: > node has a unit name, but no reg or ranges property > Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5- > 21.11: > Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges > property, but no unit name > Documentation/devicetree/bindings/spi/qcom,spi-qcom- > qspi.example.dts:20.20-43.11: > Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, > but no reg or ranges property > Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28- > 21.11: > Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit > name, but no reg or ranges property > > Cc: Maxime Ripard <mripard@kernel.org> > Cc: Chen-Yu Tsai <wens@csie.org> > Cc: "Nuno Sá" <nuno.sa@analog.com> > Cc: Jean Delvare <jdelvare@suse.com> > Cc: Guenter Roeck <linux@roeck-us.net> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Jonathan Hunter <jonathanh@nvidia.com> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: "David S. Miller" <davem@davemloft.net> > Cc: Matt Mackall <mpm@selenic.com> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Cc: Florian Fainelli <f.fainelli@gmail.com> > Cc: Ray Jui <rjui@broadcom.com> > Cc: Scott Branden <sbranden@broadcom.com> > Cc: bcm-kernel-feedback-list@broadcom.com > Cc: Mark Brown <broonie@kernel.org> > Cc: linux-hwmon@vger.kernel.org > Cc: linux-tegra@vger.kernel.org > Cc: linux-arm-msm@vger.kernel.org > Cc: netdev@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: linux-rpi-kernel@lists.infradead.org > Cc: linux-spi@vger.kernel.org > Cc: linux-usb@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- Acked-by: Nuno Sá <nuno.sa@analog.com> > Will take this via the DT tree. > > Rob > > .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 6 +++ > .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- > .../nvidia,tegra186-mc.yaml | 41 +++++++++++-------- > .../devicetree/bindings/mfd/st,stpmic1.yaml | 2 +- > .../bindings/net/qcom,ipq8064-mdio.yaml | 1 + > .../devicetree/bindings/rng/brcm,bcm2835.yaml | 2 +- > .../bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +- > .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +- > 8 files changed, 35 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i- > a10-mbus.yaml > b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10- > mbus.yaml > index aa0738b4d534..e713a6fe4cf7 100644 > --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10- > mbus.yaml > +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10- > mbus.yaml > @@ -42,6 +42,10 @@ properties: > description: > See section 2.3.9 of the DeviceTree Specification. > > + '#address-cells': true > + > + '#size-cells': true > + > required: > - "#interconnect-cells" > - compatible > @@ -59,6 +63,8 @@ examples: > compatible = "allwinner,sun5i-a13-mbus"; > reg = <0x01c01000 0x1000>; > clocks = <&ccu CLK_MBUS>; > + #address-cells = <1>; > + #size-cells = <1>; > dma-ranges = <0x00000000 0x40000000 0x20000000>; > #interconnect-cells = <1>; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan- > control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan- > control.yaml > index 57a240d2d026..29bb2c778c59 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -47,7 +47,7 @@ required: > > examples: > - | > - fpga_axi: fpga-axi@0 { > + fpga_axi: fpga-axi { > #address-cells = <0x2>; > #size-cells = <0x1>; > > diff --git a/Documentation/devicetree/bindings/memory- > controllers/nvidia,tegra186-mc.yaml > b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186- > mc.yaml > index 12516bd89cf9..611bda38d187 100644 > --- a/Documentation/devicetree/bindings/memory- > controllers/nvidia,tegra186-mc.yaml > +++ b/Documentation/devicetree/bindings/memory- > controllers/nvidia,tegra186-mc.yaml > @@ -97,30 +97,35 @@ examples: > #include <dt-bindings/clock/tegra186-clock.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - memory-controller@2c00000 { > - compatible = "nvidia,tegra186-mc"; > - reg = <0x0 0x02c00000 0x0 0xb0000>; > - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > - > + bus { > #address-cells = <2>; > #size-cells = <2>; > > - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; > + memory-controller@2c00000 { > + compatible = "nvidia,tegra186-mc"; > + reg = <0x0 0x02c00000 0x0 0xb0000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; > > - /* > - * Memory clients have access to all 40 bits that the memory > - * controller can address. > - */ > - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > + /* > + * Memory clients have access to all 40 bits that the memory > + * controller can address. > + */ > + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; > > - external-memory-controller@2c60000 { > - compatible = "nvidia,tegra186-emc"; > - reg = <0x0 0x02c60000 0x0 0x50000>; > - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&bpmp TEGRA186_CLK_EMC>; > - clock-names = "emc"; > + external-memory-controller@2c60000 { > + compatible = "nvidia,tegra186-emc"; > + reg = <0x0 0x02c60000 0x0 0x50000>; > + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&bpmp TEGRA186_CLK_EMC>; > + clock-names = "emc"; > > - nvidia,bpmp = <&bpmp>; > + nvidia,bpmp = <&bpmp>; > + }; > }; > }; > > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > index d9ad9260e348..f88d13d70441 100644 > --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml > @@ -274,7 +274,7 @@ examples: > - | > #include <dt-bindings/mfd/st,stpmic1.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > - i2c@0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > pmic@33 { > diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064- > mdio.yaml > index b9f90081046f..67df3fe861ee 100644 > --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml > @@ -48,6 +48,7 @@ examples: > > switch@10 { > compatible = "qca,qca8337"; > + reg = <0x10>; > /* ... */ > }; > }; > diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > index 89ab67f20a7f..c147900f9041 100644 > --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml > @@ -39,7 +39,7 @@ additionalProperties: false > > examples: > - | > - rng { > + rng@7e104000 { > compatible = "brcm,bcm2835-rng"; > reg = <0x7e104000 0x10>; > interrupts = <2 29>; > diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom- > qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom- > qspi.yaml > index 0cf470eaf2a0..5c16cf59ca00 100644 > --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml > @@ -61,7 +61,7 @@ examples: > #include <dt-bindings/clock/qcom,gcc-sdm845.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > - soc: soc@0 { > + soc: soc { > #address-cells = <2>; > #size-cells = <2>; > > diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > index 1d6877875077..c2d2ee43ba67 100644 > --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml > @@ -56,7 +56,7 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/clock/jz4740-cgu.h> > - usb_phy: usb-phy@0 { > + usb_phy: usb-phy { > compatible = "usb-nop-xceiv"; > #phy-cells = <0>; > }; > -- > 2.20.1
On Thu, Apr 09, 2020 at 02:24:58PM -0600, Rob Herring wrote: > A recent update to dtc and changes to the default warnings introduced > some new warnings in the DT binding examples: Acked-by: Mark Brown <broonie@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml index aa0738b4d534..e713a6fe4cf7 100644 --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml @@ -42,6 +42,10 @@ properties: description: See section 2.3.9 of the DeviceTree Specification. + '#address-cells': true + + '#size-cells': true + required: - "#interconnect-cells" - compatible @@ -59,6 +63,8 @@ examples: compatible = "allwinner,sun5i-a13-mbus"; reg = <0x01c01000 0x1000>; clocks = <&ccu CLK_MBUS>; + #address-cells = <1>; + #size-cells = <1>; dma-ranges = <0x00000000 0x40000000 0x20000000>; #interconnect-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index 57a240d2d026..29bb2c778c59 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -47,7 +47,7 @@ required: examples: - | - fpga_axi: fpga-axi@0 { + fpga_axi: fpga-axi { #address-cells = <0x2>; #size-cells = <0x1>; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 12516bd89cf9..611bda38d187 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -97,30 +97,35 @@ examples: #include <dt-bindings/clock/tegra186-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - memory-controller@2c00000 { - compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; - interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - + bus { #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>; + memory-controller@2c00000 { + compatible = "nvidia,tegra186-mc"; + reg = <0x0 0x02c00000 0x0 0xb0000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; - /* - * Memory clients have access to all 40 bits that the memory - * controller can address. - */ - dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + /* + * Memory clients have access to all 40 bits that the memory + * controller can address. + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; - external-memory-controller@2c60000 { - compatible = "nvidia,tegra186-emc"; - reg = <0x0 0x02c60000 0x0 0x50000>; - interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_EMC>; - clock-names = "emc"; + external-memory-controller@2c60000 { + compatible = "nvidia,tegra186-emc"; + reg = <0x0 0x02c60000 0x0 0x50000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_EMC>; + clock-names = "emc"; - nvidia,bpmp = <&bpmp>; + nvidia,bpmp = <&bpmp>; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml index d9ad9260e348..f88d13d70441 100644 --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml @@ -274,7 +274,7 @@ examples: - | #include <dt-bindings/mfd/st,stpmic1.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c@0 { + i2c { #address-cells = <1>; #size-cells = <0>; pmic@33 { diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml index b9f90081046f..67df3fe861ee 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml @@ -48,6 +48,7 @@ examples: switch@10 { compatible = "qca,qca8337"; + reg = <0x10>; /* ... */ }; }; diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml index 89ab67f20a7f..c147900f9041 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml @@ -39,7 +39,7 @@ additionalProperties: false examples: - | - rng { + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; interrupts = <2 29>; diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml index 0cf470eaf2a0..5c16cf59ca00 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml @@ -61,7 +61,7 @@ examples: #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - soc: soc@0 { + soc: soc { #address-cells = <2>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml index 1d6877875077..c2d2ee43ba67 100644 --- a/Documentation/devicetree/bindings/usb/ingenic,musb.yaml +++ b/Documentation/devicetree/bindings/usb/ingenic,musb.yaml @@ -56,7 +56,7 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/jz4740-cgu.h> - usb_phy: usb-phy@0 { + usb_phy: usb-phy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; };
A recent update to dtc and changes to the default warnings introduced some new warnings in the DT binding examples: Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61: Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11: Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54: Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2) Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15: Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11: Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11: Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Mark Brown <broonie@kernel.org> Cc: linux-hwmon@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- Will take this via the DT tree. Rob .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 6 +++ .../bindings/hwmon/adi,axi-fan-control.yaml | 2 +- .../nvidia,tegra186-mc.yaml | 41 +++++++++++-------- .../devicetree/bindings/mfd/st,stpmic1.yaml | 2 +- .../bindings/net/qcom,ipq8064-mdio.yaml | 1 + .../devicetree/bindings/rng/brcm,bcm2835.yaml | 2 +- .../bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +- .../devicetree/bindings/usb/ingenic,musb.yaml | 2 +- 8 files changed, 35 insertions(+), 23 deletions(-)