@@ -346,6 +346,16 @@ config BROADCOM_PHY
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481, BCM54810 and BCM5482 PHYs.
+config BCM54140_PHY
+ tristate "Broadcom BCM54140 PHY"
+ depends on PHYLIB
+ select BCM_NET_PHYLIB
+ help
+ Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
+
+ This driver also supports the hardware monitoring of this PHY and
+ exposes voltage and temperature sensors.
+
config BCM84881_PHY
tristate "Broadcom BCM84881 PHY"
depends on PHYLIB
@@ -68,6 +68,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_BCM54140_PHY) += bcm54140.o
obj-$(CONFIG_BCM84881_PHY) += bcm84881.o
obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_CORTINA_PHY) += cortina.o
new file mode 100644
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY
+ *
+ * Copyright (c) 2020 Michael Walle <michael@walle.cc>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/brcmphy.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#include "bcm-phy-lib.h"
+
+/* RDB per-port registers
+ */
+#define BCM54140_RDB_ISR 0x00a /* interrupt status */
+#define BCM54140_RDB_IMR 0x00b /* interrupt mask */
+#define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */
+#define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */
+#define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */
+#define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */
+#define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */
+#define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */
+#define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */
+#define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */
+#define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */
+#define BCM54140_RDB_SPARE3_BIT0 BIT(0)
+#define BCM54140_RDB_LED_CTRL 0x019 /* LED control */
+#define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4)
+#define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8)
+#define BCM54140_RDB_C_APWR 0x01a /* auto power down control */
+#define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */
+#define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */
+#define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */
+#define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */
+#define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */
+#define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5)
+#define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */
+#define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */
+#define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */
+#define BCM54140_RDB_C_PWR 0x02a /* copper power control */
+#define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */
+#define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */
+#define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */
+
+/* RDB global registers
+ */
+#define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */
+#define BCM54140_RDB_TOP_IMR_PORT0 BIT(4)
+#define BCM54140_RDB_TOP_IMR_PORT1 BIT(5)
+#define BCM54140_RDB_TOP_IMR_PORT2 BIT(6)
+#define BCM54140_RDB_TOP_IMR_PORT3 BIT(7)
+
+#define BCM54140_DEFAULT_DOWNSHIFT 5
+#define BCM54140_MAX_DOWNSHIFT 9
+
+struct bcm54140_phy_priv {
+ int port;
+ int base_addr;
+};
+
+static int bcm54140_phy_base_read_rdb(struct phy_device *phydev, u16 rdb)
+{
+ struct bcm54140_phy_priv *priv = phydev->priv;
+ struct mii_bus *bus = phydev->mdio.bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+ ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ goto out;
+
+ ret = __mdiobus_read(bus, priv->base_addr, MII_BCM54XX_RDB_DATA);
+
+out:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int bcm54140_phy_base_write_rdb(struct phy_device *phydev,
+ u16 rdb, u16 val)
+{
+ struct bcm54140_phy_priv *priv = phydev->priv;
+ struct mii_bus *bus = phydev->mdio.bus;
+ int ret;
+
+ mutex_lock(&bus->mdio_lock);
+ ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb);
+ if (ret < 0)
+ goto out;
+
+ ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_DATA, val);
+
+out:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int bcm54140_b0_workaround(struct phy_device *phydev)
+{
+ int spare3;
+ int ret;
+
+ spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3);
+ if (spare3 < 0)
+ return spare3;
+
+ spare3 &= ~BCM54140_RDB_SPARE3_BIT0;
+
+ ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
+ if (ret)
+ return ret;
+
+ ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
+ if (ret)
+ return ret;
+
+ ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
+ if (ret)
+ return ret;
+
+ spare3 |= BCM54140_RDB_SPARE3_BIT0;
+
+ return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3);
+}
+
+/* The BCM54140 is a quad PHY where only the first port has access to the
+ * global register. Thus we need to find out its PHY address.
+ *
+ */
+static int bcm54140_get_base_addr_and_port(struct phy_device *phydev)
+{
+ struct bcm54140_phy_priv *priv = phydev->priv;
+ struct mii_bus *bus = phydev->mdio.bus;
+ int addr, min_addr, max_addr;
+ int step = 1;
+ u32 phy_id;
+ int tmp;
+
+ min_addr = phydev->mdio.addr;
+ max_addr = phydev->mdio.addr;
+ addr = phydev->mdio.addr;
+
+ /* We scan forward and backwards and look for PHYs which have the
+ * same phy_id like we do. Step 1 will scan forward, step 2
+ * backwards. Once we are finished, we have a min_addr and
+ * max_addr which resembles the range of PHY addresses of the same
+ * type of PHY. There is one caveat; there may be many PHYs of
+ * the same type, but we know that each PHY takes exactly 4
+ * consecutive addresses. Therefore we can deduce our offset
+ * to the base address of this quad PHY.
+ */
+
+ while (1) {
+ if (step == 3) {
+ break;
+ } else if (step == 1) {
+ max_addr = addr;
+ addr++;
+ } else {
+ min_addr = addr;
+ addr--;
+ }
+
+ if (addr < 0 || addr >= PHY_MAX_ADDR) {
+ addr = phydev->mdio.addr;
+ step++;
+ continue;
+ }
+
+ /* read the PHY id */
+ tmp = mdiobus_read(bus, addr, MII_PHYSID1);
+ if (tmp < 0)
+ return tmp;
+ phy_id = tmp << 16;
+ tmp = mdiobus_read(bus, addr, MII_PHYSID2);
+ if (tmp < 0)
+ return tmp;
+ phy_id |= tmp;
+
+ /* see if it is still the same PHY */
+ if ((phy_id & phydev->drv->phy_id_mask) !=
+ (phydev->drv->phy_id & phydev->drv->phy_id_mask)) {
+ addr = phydev->mdio.addr;
+ step++;
+ }
+ }
+
+ /* The range we get should be a multiple of four. Please note that both
+ * the min_addr and max_addr are inclusive. So we have to add one if we
+ * subtract them.
+ */
+ if ((max_addr - min_addr + 1) % 4) {
+ dev_err(&phydev->mdio.dev,
+ "Detected Quad PHY IDs %d..%d doesn't make sense.\n",
+ min_addr, max_addr);
+ return -EINVAL;
+ }
+
+ priv->port = (phydev->mdio.addr - min_addr) % 4;
+ priv->base_addr = phydev->mdio.addr - priv->port;
+
+ return 0;
+}
+
+static int bcm54140_phy_probe(struct phy_device *phydev)
+{
+ struct bcm54140_phy_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ ret = bcm54140_get_base_addr_and_port(phydev);
+ if (ret)
+ return ret;
+
+ dev_info(&phydev->mdio.dev,
+ "probed (port %d, base PHY address %d)\n",
+ priv->port, priv->base_addr);
+
+ return 0;
+}
+
+static int bcm54140_config_init(struct phy_device *phydev)
+{
+ u16 reg = 0xffff;
+ int ret;
+
+ /* Apply hardware errata */
+ ret = bcm54140_b0_workaround(phydev);
+ if (ret)
+ return ret;
+
+ /* unmask events we are interested in. */
+ reg &= ~(BCM54140_RDB_INT_DUPLEX |
+ BCM54140_RDB_INT_SPEED |
+ BCM54140_RDB_INT_LINK);
+ ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg);
+ if (ret)
+ return ret;
+
+ /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=ACTIVITY */
+ ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1,
+ 0, BCM54140_RDB_SPARE1_LSLM);
+ if (ret)
+ return ret;
+
+ ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL,
+ 0, BCM54140_RDB_LED_CTRL_ACTLINK0);
+ if (ret)
+ return ret;
+
+ /* disable super isolate mode */
+ return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR,
+ BCM54140_RDB_C_PWR_ISOLATE, 0);
+}
+
+int bcm54140_phy_did_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
+
+ return (ret < 0) ? 0 : ret;
+}
+
+int bcm54140_phy_ack_intr(struct phy_device *phydev)
+{
+ int reg;
+
+ /* clear pending interrupts */
+ reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR);
+ if (reg < 0)
+ return reg;
+
+ return 0;
+}
+
+int bcm54140_phy_config_intr(struct phy_device *phydev)
+{
+ struct bcm54140_phy_priv *priv = phydev->priv;
+ static const u16 port_to_imr_bit[] = {
+ BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1,
+ BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3,
+ };
+ int reg;
+
+ if (priv->port >= ARRAY_SIZE(port_to_imr_bit))
+ return -EINVAL;
+
+ reg = bcm54140_phy_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR);
+ if (reg < 0)
+ return reg;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ reg &= ~port_to_imr_bit[priv->port];
+ else
+ reg |= port_to_imr_bit[priv->port];
+
+ return bcm54140_phy_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg);
+}
+
+static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data)
+{
+ int val;
+
+ val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL);
+ if (val < 0)
+ return val;
+
+ if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) {
+ *data = DOWNSHIFT_DEV_DISABLE;
+ return 0;
+ }
+
+ val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2);
+ if (val < 0)
+ return val;
+
+ if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS)
+ *data = 1;
+ else
+ *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2;
+
+ return 0;
+}
+
+static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+ u16 mask, set;
+ int ret;
+
+ if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT)
+ return -EINVAL;
+
+ if (!cnt)
+ return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
+ BCM54140_RDB_C_MISC_CTRL_WS_EN, 0);
+
+ if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT)
+ cnt = BCM54140_DEFAULT_DOWNSHIFT;
+
+ if (cnt == 1) {
+ mask = 0;
+ set = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
+ } else {
+ mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS;
+ mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT;
+ set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2);
+ }
+ ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2,
+ mask, set);
+ if (ret)
+ return ret;
+
+ return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL,
+ 0, BCM54140_RDB_C_MISC_CTRL_WS_EN);
+}
+
+static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval)
+{
+ int val;
+
+ val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR);
+ if (val < 0)
+ return val;
+
+ switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) {
+ case BCM54140_RDB_C_APWR_APD_MODE_DIS:
+ case BCM54140_RDB_C_APWR_APD_MODE_DIS2:
+ *tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+ break;
+ case BCM54140_RDB_C_APWR_APD_MODE_EN:
+ case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG:
+ switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) {
+ case BCM54140_RDB_C_APWR_SLP_TIM_2_7:
+ *tx_interval = 2700;
+ break;
+ case BCM54140_RDB_C_APWR_SLP_TIM_5_4:
+ *tx_interval = 5400;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval)
+{
+ u16 mask, set;
+
+ mask = BCM54140_RDB_C_APWR_APD_MODE_MASK;
+ if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
+ set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
+ BCM54140_RDB_C_APWR_APD_MODE_DIS);
+ else
+ set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK,
+ BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG);
+
+ /* enable single pulse mode */
+ set |= BCM54140_RDB_C_APWR_SINGLE_PULSE;
+
+ /* set sleep timer */
+ mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK;
+ switch (tx_interval) {
+ case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+ case ETHTOOL_PHY_EDPD_DISABLE:
+ case 2700:
+ set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7;
+ break;
+ case 5400:
+ set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set);
+}
+
+static int bcm54140_get_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return bcm54140_get_downshift(phydev, data);
+ case ETHTOOL_PHY_EDPD:
+ return bcm54140_get_edpd(phydev, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bcm54140_set_tunable(struct phy_device *phydev,
+ struct ethtool_tunable *tuna, const void *data)
+{
+ switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return bcm54140_set_downshift(phydev, *(const u8 *)data);
+ case ETHTOOL_PHY_EDPD:
+ return bcm54140_set_edpd(phydev, *(const u16 *)data);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct phy_driver bcm54140_drivers[] = {
+ {
+ .phy_id = PHY_ID_BCM54140,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM54140",
+ .features = PHY_GBIT_FEATURES,
+ .config_init = bcm54140_config_init,
+ .did_interrupt = bcm54140_phy_did_interrupt,
+ .ack_interrupt = bcm54140_phy_ack_intr,
+ .config_intr = bcm54140_phy_config_intr,
+ .probe = bcm54140_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .get_tunable = bcm54140_get_tunable,
+ .set_tunable = bcm54140_set_tunable,
+ },
+};
+module_phy_driver(bcm54140_drivers);
+
+static struct mdio_device_id __maybe_unused bcm54140_tbl[] = {
+ { PHY_ID_BCM54140, 0xfffffff0 },
+ { }
+};
+
+MODULE_AUTHOR("Michael Walle");
+MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver");
+MODULE_DEVICE_TABLE(mdio, bcm54140_tbl);
+MODULE_LICENSE("GPL");
@@ -24,6 +24,7 @@
#define PHY_ID_BCM5461 0x002060c0
#define PHY_ID_BCM54612E 0x03625e60
#define PHY_ID_BCM54616S 0x03625d10
+#define PHY_ID_BCM54140 0xae025019
#define PHY_ID_BCM57780 0x03625d90
#define PHY_ID_BCM89610 0x03625cd0
The Broadcom BCM54140 is a Quad SGMII/QSGMII Copper/Fiber Gigabit Ethernet transceiver. This also adds support for tunables to set and get downshift and energy detect auto power-down. The PHY has four ports and each port has its own PHY address. There are per-port registers as well as global registers. Unfortunately, the global registers can only be accessed by reading and writing from/to the PHY address of the first port. Further, there is no way to find out what port you actually are by just reading the per-port registers. We therefore, have to scan the bus on the PHY probe to determine the port and thus what address we need to access the global registers. Signed-off-by: Michael Walle <michael@walle.cc> --- drivers/net/phy/Kconfig | 10 + drivers/net/phy/Makefile | 1 + drivers/net/phy/bcm54140.c | 478 +++++++++++++++++++++++++++++++++++++ include/linux/brcmphy.h | 1 + 4 files changed, 490 insertions(+) create mode 100644 drivers/net/phy/bcm54140.c