From patchwork Fri Apr 17 19:28:57 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11496057 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1102F13B2 for ; Fri, 17 Apr 2020 19:29:34 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DD79622202 for ; Fri, 17 Apr 2020 19:29:33 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="VqGKR20P" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728826AbgDQT3U (ORCPT ); Fri, 17 Apr 2020 15:29:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53636 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729542AbgDQT3S (ORCPT ); Fri, 17 Apr 2020 15:29:18 -0400 Received: from ssl.serverraum.org (ssl.serverraum.org [IPv6:2a01:4f8:151:8464::1:2]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0582CC061A0F; Fri, 17 Apr 2020 12:29:17 -0700 (PDT) Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id D141F2305B; Fri, 17 Apr 2020 21:29:14 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1587151755; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=WUD86DCTZz8YjRBoM115YV3BrPjofCjL/0iDkgj3eW4=; b=VqGKR20P1x+83VMk3Cvr4PwMXOiarvjBCRLJUR0eeJKZ2wew/vUy903VBqhhE66+jZSVSY eqf0VyMikPbk/t9E/3uRZHNzmL+Zrz2c5z6vzrlUHqxwqveFUXfV4+KPDy4SosaWVRsKYd T7PJtap01jMV1Iz1yqrw0u0Iga32P7I= From: Michael Walle To: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org Cc: Jean Delvare , Guenter Roeck , Andrew Lunn , Florian Fainelli , Heiner Kallweit , Russell King , "David S . Miller" , Michael Walle Subject: [PATCH net-next 2/3] net: phy: add Broadcom BCM54140 support Date: Fri, 17 Apr 2020 21:28:57 +0200 Message-Id: <20200417192858.6997-2-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200417192858.6997-1-michael@walle.cc> References: <20200417192858.6997-1-michael@walle.cc> MIME-Version: 1.0 X-Spamd-Bar: ++++++ X-Spam-Level: ****** X-Rspamd-Server: web X-Spam-Status: Yes, score=6.40 X-Spam-Score: 6.40 X-Rspamd-Queue-Id: D141F2305B X-Spamd-Result: default: False [6.40 / 15.00]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_MISSING_CHARSET(2.50)[]; FREEMAIL_ENVRCPT(0.00)[gmail.com]; TAGGED_RCPT(0.00)[]; MIME_GOOD(-0.10)[text/plain]; BROKEN_CONTENT_TYPE(1.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; NEURAL_SPAM(0.00)[0.939]; DKIM_SIGNED(0.00)[]; RCPT_COUNT_SEVEN(0.00)[11]; MID_CONTAINS_FROM(1.00)[]; RCVD_COUNT_ZERO(0.00)[0]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:31334, ipnet:2a02:810c:8000::/33, country:DE]; FREEMAIL_CC(0.00)[suse.com,roeck-us.net,lunn.ch,gmail.com,armlinux.org.uk,davemloft.net,walle.cc]; SUSPICIOUS_RECIPS(1.50)[] X-Spam: Yes Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org The Broadcom BCM54140 is a Quad SGMII/QSGMII Copper/Fiber Gigabit Ethernet transceiver. This also adds support for tunables to set and get downshift and energy detect auto power-down. The PHY has four ports and each port has its own PHY address. There are per-port registers as well as global registers. Unfortunately, the global registers can only be accessed by reading and writing from/to the PHY address of the first port. Further, there is no way to find out what port you actually are by just reading the per-port registers. We therefore, have to scan the bus on the PHY probe to determine the port and thus what address we need to access the global registers. Signed-off-by: Michael Walle --- drivers/net/phy/Kconfig | 10 + drivers/net/phy/Makefile | 1 + drivers/net/phy/bcm54140.c | 478 +++++++++++++++++++++++++++++++++++++ include/linux/brcmphy.h | 1 + 4 files changed, 490 insertions(+) create mode 100644 drivers/net/phy/bcm54140.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3fa33d27eeba..cb7936b577de 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -346,6 +346,16 @@ config BROADCOM_PHY Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481, BCM54810 and BCM5482 PHYs. +config BCM54140_PHY + tristate "Broadcom BCM54140 PHY" + depends on PHYLIB + select BCM_NET_PHYLIB + help + Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. + + This driver also supports the hardware monitoring of this PHY and + exposes voltage and temperature sensors. + config BCM84881_PHY tristate "Broadcom BCM84881 PHY" depends on PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 2f5c7093a65b..cd345b75d127 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_BCM54140_PHY) += bcm54140.o obj-$(CONFIG_BCM84881_PHY) += bcm84881.o obj-$(CONFIG_CICADA_PHY) += cicada.o obj-$(CONFIG_CORTINA_PHY) += cortina.o diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c new file mode 100644 index 000000000000..97465491b41b --- /dev/null +++ b/drivers/net/phy/bcm54140.c @@ -0,0 +1,478 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY + * + * Copyright (c) 2020 Michael Walle + */ + +#include +#include +#include +#include + +#include "bcm-phy-lib.h" + +/* RDB per-port registers + */ +#define BCM54140_RDB_ISR 0x00a /* interrupt status */ +#define BCM54140_RDB_IMR 0x00b /* interrupt mask */ +#define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */ +#define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */ +#define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */ +#define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */ +#define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */ +#define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */ +#define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */ +#define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */ +#define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */ +#define BCM54140_RDB_SPARE3_BIT0 BIT(0) +#define BCM54140_RDB_LED_CTRL 0x019 /* LED control */ +#define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4) +#define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8) +#define BCM54140_RDB_C_APWR 0x01a /* auto power down control */ +#define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */ +#define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5) +#define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */ +#define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */ +#define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */ +#define BCM54140_RDB_C_PWR 0x02a /* copper power control */ +#define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */ +#define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */ +#define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */ + +/* RDB global registers + */ +#define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */ +#define BCM54140_RDB_TOP_IMR_PORT0 BIT(4) +#define BCM54140_RDB_TOP_IMR_PORT1 BIT(5) +#define BCM54140_RDB_TOP_IMR_PORT2 BIT(6) +#define BCM54140_RDB_TOP_IMR_PORT3 BIT(7) + +#define BCM54140_DEFAULT_DOWNSHIFT 5 +#define BCM54140_MAX_DOWNSHIFT 9 + +struct bcm54140_phy_priv { + int port; + int base_addr; +}; + +static int bcm54140_phy_base_read_rdb(struct phy_device *phydev, u16 rdb) +{ + struct bcm54140_phy_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int ret; + + mutex_lock(&bus->mdio_lock); + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __mdiobus_read(bus, priv->base_addr, MII_BCM54XX_RDB_DATA); + +out: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +static int bcm54140_phy_base_write_rdb(struct phy_device *phydev, + u16 rdb, u16 val) +{ + struct bcm54140_phy_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int ret; + + mutex_lock(&bus->mdio_lock); + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __mdiobus_write(bus, priv->base_addr, MII_BCM54XX_RDB_DATA, val); + +out: + mutex_unlock(&bus->mdio_lock); + return ret; +} + +static int bcm54140_b0_workaround(struct phy_device *phydev) +{ + int spare3; + int ret; + + spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3); + if (spare3 < 0) + return spare3; + + spare3 &= ~BCM54140_RDB_SPARE3_BIT0; + + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); + if (ret) + return ret; + + spare3 |= BCM54140_RDB_SPARE3_BIT0; + + return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); +} + +/* The BCM54140 is a quad PHY where only the first port has access to the + * global register. Thus we need to find out its PHY address. + * + */ +static int bcm54140_get_base_addr_and_port(struct phy_device *phydev) +{ + struct bcm54140_phy_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int addr, min_addr, max_addr; + int step = 1; + u32 phy_id; + int tmp; + + min_addr = phydev->mdio.addr; + max_addr = phydev->mdio.addr; + addr = phydev->mdio.addr; + + /* We scan forward and backwards and look for PHYs which have the + * same phy_id like we do. Step 1 will scan forward, step 2 + * backwards. Once we are finished, we have a min_addr and + * max_addr which resembles the range of PHY addresses of the same + * type of PHY. There is one caveat; there may be many PHYs of + * the same type, but we know that each PHY takes exactly 4 + * consecutive addresses. Therefore we can deduce our offset + * to the base address of this quad PHY. + */ + + while (1) { + if (step == 3) { + break; + } else if (step == 1) { + max_addr = addr; + addr++; + } else { + min_addr = addr; + addr--; + } + + if (addr < 0 || addr >= PHY_MAX_ADDR) { + addr = phydev->mdio.addr; + step++; + continue; + } + + /* read the PHY id */ + tmp = mdiobus_read(bus, addr, MII_PHYSID1); + if (tmp < 0) + return tmp; + phy_id = tmp << 16; + tmp = mdiobus_read(bus, addr, MII_PHYSID2); + if (tmp < 0) + return tmp; + phy_id |= tmp; + + /* see if it is still the same PHY */ + if ((phy_id & phydev->drv->phy_id_mask) != + (phydev->drv->phy_id & phydev->drv->phy_id_mask)) { + addr = phydev->mdio.addr; + step++; + } + } + + /* The range we get should be a multiple of four. Please note that both + * the min_addr and max_addr are inclusive. So we have to add one if we + * subtract them. + */ + if ((max_addr - min_addr + 1) % 4) { + dev_err(&phydev->mdio.dev, + "Detected Quad PHY IDs %d..%d doesn't make sense.\n", + min_addr, max_addr); + return -EINVAL; + } + + priv->port = (phydev->mdio.addr - min_addr) % 4; + priv->base_addr = phydev->mdio.addr - priv->port; + + return 0; +} + +static int bcm54140_phy_probe(struct phy_device *phydev) +{ + struct bcm54140_phy_priv *priv; + int ret; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + ret = bcm54140_get_base_addr_and_port(phydev); + if (ret) + return ret; + + dev_info(&phydev->mdio.dev, + "probed (port %d, base PHY address %d)\n", + priv->port, priv->base_addr); + + return 0; +} + +static int bcm54140_config_init(struct phy_device *phydev) +{ + u16 reg = 0xffff; + int ret; + + /* Apply hardware errata */ + ret = bcm54140_b0_workaround(phydev); + if (ret) + return ret; + + /* unmask events we are interested in. */ + reg &= ~(BCM54140_RDB_INT_DUPLEX | + BCM54140_RDB_INT_SPEED | + BCM54140_RDB_INT_LINK); + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg); + if (ret) + return ret; + + /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=ACTIVITY */ + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1, + 0, BCM54140_RDB_SPARE1_LSLM); + if (ret) + return ret; + + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL, + 0, BCM54140_RDB_LED_CTRL_ACTLINK0); + if (ret) + return ret; + + /* disable super isolate mode */ + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR, + BCM54140_RDB_C_PWR_ISOLATE, 0); +} + +int bcm54140_phy_did_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + + return (ret < 0) ? 0 : ret; +} + +int bcm54140_phy_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* clear pending interrupts */ + reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + if (reg < 0) + return reg; + + return 0; +} + +int bcm54140_phy_config_intr(struct phy_device *phydev) +{ + struct bcm54140_phy_priv *priv = phydev->priv; + static const u16 port_to_imr_bit[] = { + BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1, + BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3, + }; + int reg; + + if (priv->port >= ARRAY_SIZE(port_to_imr_bit)) + return -EINVAL; + + reg = bcm54140_phy_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~port_to_imr_bit[priv->port]; + else + reg |= port_to_imr_bit[priv->port]; + + return bcm54140_phy_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg); +} + +static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL); + if (val < 0) + return val; + + if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) { + *data = DOWNSHIFT_DEV_DISABLE; + return 0; + } + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2); + if (val < 0) + return val; + + if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS) + *data = 1; + else + *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2; + + return 0; +} + +static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 mask, set; + int ret; + + if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT) + return -EINVAL; + + if (!cnt) + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + BCM54140_RDB_C_MISC_CTRL_WS_EN, 0); + + if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT) + cnt = BCM54140_DEFAULT_DOWNSHIFT; + + if (cnt == 1) { + mask = 0; + set = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + } else { + mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT; + set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2); + } + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2, + mask, set); + if (ret) + return ret; + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + 0, BCM54140_RDB_C_MISC_CTRL_WS_EN); +} + +static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR); + if (val < 0) + return val; + + switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) { + case BCM54140_RDB_C_APWR_APD_MODE_DIS: + case BCM54140_RDB_C_APWR_APD_MODE_DIS2: + *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; + break; + case BCM54140_RDB_C_APWR_APD_MODE_EN: + case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG: + switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) { + case BCM54140_RDB_C_APWR_SLP_TIM_2_7: + *tx_interval = 2700; + break; + case BCM54140_RDB_C_APWR_SLP_TIM_5_4: + *tx_interval = 5400; + break; + } + } + + return 0; +} + +static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval) +{ + u16 mask, set; + + mask = BCM54140_RDB_C_APWR_APD_MODE_MASK; + if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_DIS); + else + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG); + + /* enable single pulse mode */ + set |= BCM54140_RDB_C_APWR_SINGLE_PULSE; + + /* set sleep timer */ + mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK; + switch (tx_interval) { + case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: + case ETHTOOL_PHY_EDPD_DISABLE: + case 2700: + set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7; + break; + case 5400: + set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4; + break; + default: + return -EINVAL; + } + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set); +} + +static int bcm54140_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_get_downshift(phydev, data); + case ETHTOOL_PHY_EDPD: + return bcm54140_get_edpd(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int bcm54140_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_set_downshift(phydev, *(const u8 *)data); + case ETHTOOL_PHY_EDPD: + return bcm54140_set_edpd(phydev, *(const u16 *)data); + default: + return -EOPNOTSUPP; + } +} + +static struct phy_driver bcm54140_drivers[] = { + { + .phy_id = PHY_ID_BCM54140, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM54140", + .features = PHY_GBIT_FEATURES, + .config_init = bcm54140_config_init, + .did_interrupt = bcm54140_phy_did_interrupt, + .ack_interrupt = bcm54140_phy_ack_intr, + .config_intr = bcm54140_phy_config_intr, + .probe = bcm54140_phy_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .get_tunable = bcm54140_get_tunable, + .set_tunable = bcm54140_set_tunable, + }, +}; +module_phy_driver(bcm54140_drivers); + +static struct mdio_device_id __maybe_unused bcm54140_tbl[] = { + { PHY_ID_BCM54140, 0xfffffff0 }, + { } +}; + +MODULE_AUTHOR("Michael Walle"); +MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver"); +MODULE_DEVICE_TABLE(mdio, bcm54140_tbl); +MODULE_LICENSE("GPL"); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index e14f78b3c8a4..5a346a985a5b 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -24,6 +24,7 @@ #define PHY_ID_BCM5461 0x002060c0 #define PHY_ID_BCM54612E 0x03625e60 #define PHY_ID_BCM54616S 0x03625d10 +#define PHY_ID_BCM54140 0xae025019 #define PHY_ID_BCM57780 0x03625d90 #define PHY_ID_BCM89610 0x03625cd0