From patchwork Thu Jun 4 21:10:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11588479 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 307E6912 for ; Thu, 4 Jun 2020 21:12:14 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0FB992067B for ; Thu, 4 Jun 2020 21:12:14 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="S+ZXBXto" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728107AbgFDVLz (ORCPT ); Thu, 4 Jun 2020 17:11:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59358 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726594AbgFDVLU (ORCPT ); Thu, 4 Jun 2020 17:11:20 -0400 Received: from ssl.serverraum.org (ssl.serverraum.org [IPv6:2a01:4f8:151:8464::1:2]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A93BFC08C5C0; Thu, 4 Jun 2020 14:11:19 -0700 (PDT) Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id 17B3B22F9C; Thu, 4 Jun 2020 23:11:17 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1591305077; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=5ML389VIPDlcqH0is2ISEMU1iStQnOv84I3nRoWZJ5A=; b=S+ZXBXtoM3kYZ7moTsi46zITtMNggn+W1U0TSdd070MMRSTlFNA71pv5xloD9NA8AbCwdq y3M9J8EFMeV2Rf+sgx5tkcJTEXLnGXVZe6kAYE3EjuLFOvQdVtNO+myDjnFez1cu0ZGfij QCP/XsZCfhu1yyZJ/YR/TP7Vrk7em4k= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Linus Walleij , Bartosz Golaszewski , Rob Herring , Jean Delvare , Guenter Roeck , Lee Jones , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Wim Van Sebroeck , Shawn Guo , Li Yang , Thomas Gleixner , Jason Cooper , Marc Zyngier , Mark Brown , Greg Kroah-Hartman , Andy Shevchenko , Michael Walle Subject: [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller Date: Thu, 4 Jun 2020 23:10:30 +0200 Message-Id: <20200604211039.12689-3-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200604211039.12689-1-michael@walle.cc> References: <20200604211039.12689-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Add the core support for the board management controller found on the SMARC-sAL28 board. It consists of the following functions: - watchdog - GPIO controller - PWM controller - fan sensor - interrupt controller At the moment, this controller is used on the Kontron SMARC-sAL28 board. Please note that the MFD driver is defined as bool in the Kconfig because the next patch will add interrupt support. Signed-off-by: Michael Walle --- drivers/mfd/Kconfig | 19 ++++++++++ drivers/mfd/Makefile | 2 ++ drivers/mfd/sl28cpld.c | 79 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 100 insertions(+) create mode 100644 drivers/mfd/sl28cpld.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4f8b73d92df3..5c0cd514d197 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2109,5 +2109,24 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. +config MFD_SL28CPLD + bool "Kontron sl28 core driver" + depends on I2C=y + depends on OF + select REGMAP_I2C + select MFD_CORE + help + This option enables support for the board management controller + found on the Kontron sl28 CPLD. You have to select individual + functions, such as watchdog, GPIO, etc, under the corresponding menus + in order to enable them. + + Currently supported boards are: + + Kontron SMARC-sAL28 + + To compile this driver as a module, choose M here: the module will be + called sl28cpld. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9367a92f795a..be59fb40aa28 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -264,3 +264,5 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o + +obj-$(CONFIG_MFD_SL28CPLD) += sl28cpld.o diff --git a/drivers/mfd/sl28cpld.c b/drivers/mfd/sl28cpld.c new file mode 100644 index 000000000000..a23194bb6efa --- /dev/null +++ b/drivers/mfd/sl28cpld.c @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MFD core for the sl28cpld. + * + * Copyright 2019 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SL28CPLD_VERSION 0x03 +#define SL28CPLD_MIN_REQ_VERSION 14 + +struct sl28cpld { + struct device *dev; + struct regmap *regmap; +}; + +static const struct regmap_config sl28cpld_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .reg_stride = 1, +}; + +static int sl28cpld_probe(struct i2c_client *i2c) +{ + struct sl28cpld *sl28cpld; + struct device *dev = &i2c->dev; + unsigned int cpld_version; + int ret; + + sl28cpld = devm_kzalloc(dev, sizeof(*sl28cpld), GFP_KERNEL); + if (!sl28cpld) + return -ENOMEM; + + sl28cpld->regmap = devm_regmap_init_i2c(i2c, &sl28cpld_regmap_config); + if (IS_ERR(sl28cpld->regmap)) + return PTR_ERR(sl28cpld->regmap); + + ret = regmap_read(sl28cpld->regmap, SL28CPLD_VERSION, &cpld_version); + if (ret) + return ret; + + if (cpld_version < SL28CPLD_MIN_REQ_VERSION) { + dev_err(dev, "unsupported CPLD version %d\n", cpld_version); + return -ENODEV; + } + + sl28cpld->dev = dev; + i2c_set_clientdata(i2c, sl28cpld); + + dev_info(dev, "successfully probed. CPLD version %d\n", cpld_version); + + return devm_of_platform_populate(&i2c->dev); +} + +static const struct of_device_id sl28cpld_of_match[] = { + { .compatible = "kontron,sl28cpld-r1", }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_of_match); + +static struct i2c_driver sl28cpld_driver = { + .probe_new = sl28cpld_probe, + .driver = { + .name = "sl28cpld", + .of_match_table = of_match_ptr(sl28cpld_of_match), + }, +}; +module_i2c_driver(sl28cpld_driver); + +MODULE_DESCRIPTION("sl28cpld MFD Core Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL");