From patchwork Thu Jun 4 21:10:34 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11588485 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5B99E14E3 for ; Thu, 4 Jun 2020 21:12:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3BAEF2067B for ; Thu, 4 Jun 2020 21:12:17 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="nGLZ5abc" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728016AbgFDVLw (ORCPT ); Thu, 4 Jun 2020 17:11:52 -0400 Received: from ssl.serverraum.org ([176.9.125.105]:37193 "EHLO ssl.serverraum.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726819AbgFDVLZ (ORCPT ); Thu, 4 Jun 2020 17:11:25 -0400 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id EE2E222FE3; Thu, 4 Jun 2020 23:11:21 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1591305082; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=thRMUD35mQ2CLp7g40OFx33tgegHp5PmiaEGuFoICU4=; b=nGLZ5abcsYGdDGICEhta44xmh0XdHbzE9ufB5L86JS8J0xdMYHDGt/w2zf+SASEq60oiJd Lv9YKcUjTzEWnpFiOYB0F1zFfxlViz261bZxf1PlfbQdHr35uylL0gFvk7bEU5EkbaSpVs QeHlzo0gCwVGV6PPdRpnZYd/Jzzefgw= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Linus Walleij , Bartosz Golaszewski , Rob Herring , Jean Delvare , Guenter Roeck , Lee Jones , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Wim Van Sebroeck , Shawn Guo , Li Yang , Thomas Gleixner , Jason Cooper , Marc Zyngier , Mark Brown , Greg Kroah-Hartman , Andy Shevchenko , Michael Walle Subject: [PATCH v4 06/11] gpio: add support for the sl28cpld GPIO controller Date: Thu, 4 Jun 2020 23:10:34 +0200 Message-Id: <20200604211039.12689-7-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200604211039.12689-1-michael@walle.cc> References: <20200604211039.12689-1-michael@walle.cc> MIME-Version: 1.0 X-Spam: Yes Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Add support for the GPIO controller of the sl28 board management controller. This driver is part of a multi-function device. A controller has 8 lines. There are three different flavors: full-featured GPIO with interrupt support, input-only and output-only. Signed-off-by: Michael Walle --- drivers/gpio/Kconfig | 11 +++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-sl28cpld.c | 180 +++++++++++++++++++++++++++++++++++ 3 files changed, 192 insertions(+) create mode 100644 drivers/gpio/gpio-sl28cpld.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bcacd9c74aa8..a325d2d619a8 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1215,6 +1215,17 @@ config GPIO_RC5T583 This driver provides the support for driving/reading the gpio pins of RC5T583 device through standard gpio library. +config GPIO_SL28CPLD + tristate "Kontron sl28 GPIO" + depends on MFD_SL28CPLD + select GPIO_REGMAP + select GPIOLIB_IRQCHIP + help + This enables support for the GPIOs found on the Kontron sl28 CPLD. + + This driver can also be built as a module. If so, the module will be + called gpio-sl28cpld. + config GPIO_STMPE bool "STMPE GPIOs" depends on MFD_STMPE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 1e4894e0bf0f..152127a9b339 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -130,6 +130,7 @@ obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_SIFIVE) += gpio-sifive.o obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o +obj-$(CONFIG_GPIO_SL28CPLD) += gpio-sl28cpld.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o diff --git a/drivers/gpio/gpio-sl28cpld.c b/drivers/gpio/gpio-sl28cpld.c new file mode 100644 index 000000000000..800e218ee624 --- /dev/null +++ b/drivers/gpio/gpio-sl28cpld.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sl28cpld GPIO driver. + * + * Copyright 2019 Michael Walle + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* GPIO flavor */ +#define GPIO_REG_DIR 0x00 +#define GPIO_REG_OUT 0x01 +#define GPIO_REG_IN 0x02 +#define GPIO_REG_IE 0x03 +#define GPIO_REG_IP 0x04 + +/* input-only flavor */ +#define GPI_REG_IN 0x00 + +/* output-only flavor */ +#define GPO_REG_OUT 0x00 + +enum sl28cpld_gpio_type { + SL28CPLD_GPIO = 1, + SL28CPLD_GPI, + SL28CPLD_GPO, +}; + +struct sl28cpld_gpio { + struct regmap_irq_chip irq_chip; + struct regmap_irq_chip_data *irq_data; +}; + +static const struct regmap_irq sl28cpld_gpio_irqs[] = { + REGMAP_IRQ_REG_LINE(0, 8), + REGMAP_IRQ_REG_LINE(1, 8), + REGMAP_IRQ_REG_LINE(2, 8), + REGMAP_IRQ_REG_LINE(3, 8), + REGMAP_IRQ_REG_LINE(4, 8), + REGMAP_IRQ_REG_LINE(5, 8), + REGMAP_IRQ_REG_LINE(6, 8), + REGMAP_IRQ_REG_LINE(7, 8), +}; + +static int sl28cpld_gpio_irq_init(struct device *dev, + struct sl28cpld_gpio *gpio, + struct regmap *regmap, unsigned int base, + int irq) +{ + struct regmap_irq_chip *irq_chip = &gpio->irq_chip; + + irq_chip->name = "sl28cpld-gpio-irq", + irq_chip->irqs = sl28cpld_gpio_irqs; + irq_chip->num_irqs = ARRAY_SIZE(sl28cpld_gpio_irqs); + irq_chip->num_regs = 1; + irq_chip->status_base = base + GPIO_REG_IP; + irq_chip->mask_base = base + GPIO_REG_IE; + irq_chip->mask_invert = true, + irq_chip->ack_base = base + GPIO_REG_IP; + + return devm_regmap_add_irq_chip_np(dev, dev_of_node(dev), regmap, + irq, IRQF_SHARED | IRQF_ONESHOT, 0, + irq_chip, &gpio->irq_data); +} + +static int sl28cpld_gpio_probe(struct platform_device *pdev) +{ + const struct platform_device_id *dev_id; + struct gpio_regmap_config config = {0}; + enum sl28cpld_gpio_type type; + struct sl28cpld_gpio *gpio; + bool irq_support = false; + struct regmap *regmap; + int irq, ret; + u32 base; + + if (!pdev->dev.parent) + return -ENODEV; + + dev_id = platform_get_device_id(pdev); + if (dev_id) + type = dev_id->driver_data; + else + type = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!type) + return -ENODEV; + + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + ret = device_property_read_u32(&pdev->dev, "reg", &base); + if (ret) + return -EINVAL; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) + return -ENODEV; + + config.regmap = regmap; + config.parent = &pdev->dev; + config.ngpio = 8; + + switch (type) { + case SL28CPLD_GPIO: + config.reg_dat_base = base + GPIO_REG_IN; + config.reg_set_base = base + GPIO_REG_OUT; + /* reg_dir_out_base might be zero */ + config.reg_dir_out_base = GPIO_REGMAP_ADDR(base + + GPIO_REG_DIR); + irq_support = true; + break; + case SL28CPLD_GPO: + config.reg_set_base = base + GPO_REG_OUT; + break; + case SL28CPLD_GPI: + config.reg_dat_base = base + GPI_REG_IN; + break; + default: + dev_err(&pdev->dev, "unknown type %d\n", type); + return -ENODEV; + } + + if (irq_support && + device_property_read_bool(&pdev->dev, "interrupt-controller")) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = sl28cpld_gpio_irq_init(&pdev->dev, gpio, regmap, + base, irq); + if (ret) + return ret; + + config.irq_domain = regmap_irq_get_domain(gpio->irq_data); + } + + return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&pdev->dev, &config)); +} + +static const struct of_device_id sl28cpld_gpio_of_match[] = { + { .compatible = "kontron,sl28cpld-gpio", + .data = (void *)SL28CPLD_GPIO }, + { .compatible = "kontron,sl28cpld-gpi", + .data = (void *)SL28CPLD_GPI }, + { .compatible = "kontron,sl28cpld-gpo", + .data = (void *)SL28CPLD_GPO }, + {}, +}; +MODULE_DEVICE_TABLE(of, sl28cpld_gpio_of_match); + +static const struct platform_device_id sl28cpld_gpio_id_table[] = { + { "sl28cpld-gpio", SL28CPLD_GPIO }, + { "sl28cpld-gpi", SL28CPLD_GPI }, + { "sl28cpld-gpo", SL28CPLD_GPO }, + {} +}; +MODULE_DEVICE_TABLE(platform, sl28cpld_gpio_id_table); + +static struct platform_driver sl28cpld_gpio_driver = { + .probe = sl28cpld_gpio_probe, + .id_table = sl28cpld_gpio_id_table, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = sl28cpld_gpio_of_match, + }, +}; +module_platform_driver(sl28cpld_gpio_driver); + +MODULE_DESCRIPTION("sl28cpld GPIO Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL");