| Message ID | 20210712220447.957418-3-iwona.winiarska@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Introduce PECI subsystem | expand |
On Tue, 2021-07-13 at 00:04 +0200, Iwona Winiarska wrote: > Baseboard management controllers (BMC) often run Linux but are usually > implemented with non-X86 processors. They can use PECI to access package > config space (PCS) registers on the host CPU and since some information, > e.g. figuring out the core count, can be obtained using different > registers on different CPU generations, they need to decode the family > and model. > > The format of Package Identifier PCS register that describes CPUID > information has the same layout as CPUID_1.EAX, so let's allow to reuse > cpuid helpers by making it available for other architectures as well. Just some minor comments below. You can go ahead and add: Reviewed-by: Dan Williams <dan.j.williams@intel.com> > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > Reviewed-by: Tony Luck <tony.luck@intel.com> > --- > MAINTAINERS | 2 ++ > arch/x86/Kconfig | 1 + > arch/x86/include/asm/cpu.h | 3 --- > arch/x86/include/asm/microcode.h | 2 +- > arch/x86/kvm/cpuid.h | 3 ++- > arch/x86/lib/Makefile | 2 +- > drivers/edac/mce_amd.c | 3 +-- > include/linux/x86/cpu.h | 9 +++++++++ > lib/Kconfig | 5 +++++ > lib/Makefile | 2 ++ > lib/x86/Makefile | 3 +++ > {arch/x86/lib => lib/x86}/cpu.c | 2 +- > 12 files changed, 28 insertions(+), 9 deletions(-) > create mode 100644 include/linux/x86/cpu.h > create mode 100644 lib/x86/Makefile > rename {arch/x86/lib => lib/x86}/cpu.c (95%) > > diff --git a/MAINTAINERS b/MAINTAINERS > index ec5987a00800..6f77aaca2a30 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -20081,6 +20081,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core > F: Documentation/devicetree/bindings/x86/ > F: Documentation/x86/ > F: arch/x86/ > +F: include/linux/x86/ Doesn't this technically belong in patch1 since that one introduced the directory? > +F: lib/x86/ > > X86 ENTRY CODE > M: Andy Lutomirski <luto@kernel.org> > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > index 49270655e827..750f9b896e4f 100644 > --- a/arch/x86/Kconfig > +++ b/arch/x86/Kconfig > @@ -141,6 +141,7 @@ config X86 > select GENERIC_IRQ_PROBE > select GENERIC_IRQ_RESERVATION_MODE > select GENERIC_IRQ_SHOW > + select GENERIC_LIB_X86 > select GENERIC_PENDING_IRQ if SMP > select GENERIC_PTDUMP > select GENERIC_SMP_IDLE_THREAD > diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h > index 33d41e350c79..2a663a05a795 100644 > --- a/arch/x86/include/asm/cpu.h > +++ b/arch/x86/include/asm/cpu.h > @@ -37,9 +37,6 @@ extern int _debug_hotplug_cpu(int cpu, int action); > > int mwait_usable(const struct cpuinfo_x86 *); > > -unsigned int x86_family(unsigned int sig); > -unsigned int x86_model(unsigned int sig); > -unsigned int x86_stepping(unsigned int sig); > #ifdef CONFIG_CPU_SUP_INTEL > extern void __init sld_setup(struct cpuinfo_x86 *c); > extern void switch_to_sld(unsigned long tifn); > diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h > index ab45a220fac4..4b0eabf63b98 100644 > --- a/arch/x86/include/asm/microcode.h > +++ b/arch/x86/include/asm/microcode.h > @@ -2,9 +2,9 @@ > #ifndef _ASM_X86_MICROCODE_H > #define _ASM_X86_MICROCODE_H > > -#include <asm/cpu.h> > #include <linux/earlycpio.h> > #include <linux/initrd.h> > +#include <linux/x86/cpu.h> Has this patch set received a build success notification from the kbuild robot? I.e. are you sure that this include was only here for the unsigned int x86_family(unsigned int sig); unsigned int x86_model(unsigned int sig); unsigned int x86_stepping(unsigned int sig); ...helpers. All the other replacements look trivially verifiable as only needing these 3 helpers. > > struct ucode_patch { > struct list_head plist; > diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h > index c99edfff7f82..bf070d2a2175 100644 > --- a/arch/x86/kvm/cpuid.h > +++ b/arch/x86/kvm/cpuid.h > @@ -4,10 +4,11 @@ > > #include "x86.h" > #include "reverse_cpuid.h" > -#include <asm/cpu.h> > #include <asm/processor.h> > #include <uapi/asm/kvm_para.h> > > +#include <linux/x86/cpu.h> > + > extern u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly; > void kvm_set_cpu_caps(void); > > diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile > index bad4dee4f0e4..fd73c1b72c3e 100644 > --- a/arch/x86/lib/Makefile > +++ b/arch/x86/lib/Makefile > @@ -41,7 +41,7 @@ clean-files := inat-tables.c > > obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o > > -lib-y := delay.o misc.o cmdline.o cpu.o > +lib-y := delay.o misc.o cmdline.o > lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o > lib-y += memcpy_$(BITS).o > lib-$(CONFIG_ARCH_HAS_COPY_MC) += copy_mc.o copy_mc_64.o > diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c > index 27d56920b469..f545f5fad02c 100644 > --- a/drivers/edac/mce_amd.c > +++ b/drivers/edac/mce_amd.c > @@ -1,8 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0-only > #include <linux/module.h> > #include <linux/slab.h> > - > -#include <asm/cpu.h> > +#include <linux/x86/cpu.h> > > #include "mce_amd.h" > > diff --git a/include/linux/x86/cpu.h b/include/linux/x86/cpu.h > new file mode 100644 > index 000000000000..5f383d47886d > --- /dev/null > +++ b/include/linux/x86/cpu.h > @@ -0,0 +1,9 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +#ifndef _LINUX_X86_CPU_H > +#define _LINUX_X86_CPU_H > + > +unsigned int x86_family(unsigned int sig); > +unsigned int x86_model(unsigned int sig); > +unsigned int x86_stepping(unsigned int sig); > + > +#endif /* _LINUX_X86_CPU_H */ > diff --git a/lib/Kconfig b/lib/Kconfig > index d241fe476fda..cc28bc1f2d84 100644 > --- a/lib/Kconfig > +++ b/lib/Kconfig > @@ -718,3 +718,8 @@ config PLDMFW > > config ASN1_ENCODER > tristate > + > +config GENERIC_LIB_X86 > + bool > + depends on X86 > + default n No need for a "default n" line. Omitting a default is the same as "default n".
On Wed, 2021-07-14 at 16:58 +0000, Williams, Dan J wrote: > On Tue, 2021-07-13 at 00:04 +0200, Iwona Winiarska wrote: > > Baseboard management controllers (BMC) often run Linux but are > > usually > > implemented with non-X86 processors. They can use PECI to access > > package > > config space (PCS) registers on the host CPU and since some > > information, > > e.g. figuring out the core count, can be obtained using different > > registers on different CPU generations, they need to decode the > > family > > and model. > > > > The format of Package Identifier PCS register that describes CPUID > > information has the same layout as CPUID_1.EAX, so let's allow to > > reuse > > cpuid helpers by making it available for other architectures as > > well. > > Just some minor comments below. > > You can go ahead and add: > > Reviewed-by: Dan Williams <dan.j.williams@intel.com> > > > > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > > Reviewed-by: Tony Luck <tony.luck@intel.com> > > --- > > MAINTAINERS | 2 ++ > > arch/x86/Kconfig | 1 + > > arch/x86/include/asm/cpu.h | 3 --- > > arch/x86/include/asm/microcode.h | 2 +- > > arch/x86/kvm/cpuid.h | 3 ++- > > arch/x86/lib/Makefile | 2 +- > > drivers/edac/mce_amd.c | 3 +-- > > include/linux/x86/cpu.h | 9 +++++++++ > > lib/Kconfig | 5 +++++ > > lib/Makefile | 2 ++ > > lib/x86/Makefile | 3 +++ > > {arch/x86/lib => lib/x86}/cpu.c | 2 +- > > 12 files changed, 28 insertions(+), 9 deletions(-) > > create mode 100644 include/linux/x86/cpu.h > > create mode 100644 lib/x86/Makefile > > rename {arch/x86/lib => lib/x86}/cpu.c (95%) > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ec5987a00800..6f77aaca2a30 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -20081,6 +20081,8 @@ T: git > > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core > > F: Documentation/devicetree/bindings/x86/ > > F: Documentation/x86/ > > F: arch/x86/ > > +F: include/linux/x86/ > > Doesn't this technically belong in patch1 since that one introduced > the directory? In the first patch we are moving arch/x86/include/intel-family.h content to a new file, which is why I updated MAINTAINERS just for "INTEL CPU family model numbers". Here we're moving other content that was maintained under arch/x86 which is why I extended "X86 ARCHITECTURE (32-BIT AND 64-BIT)". But I agree - "X86 ARCHITECTURE" includes "INTEL CPU family", so I guess it makes sense to add both in previous patch (otherwise get_maintainer.pl would produce different output for include/linux/x86/intel-family.h until this patch is applied). Thank you -Iwona > > > +F: lib/x86/ > > > > X86 ENTRY CODE > > M: Andy Lutomirski <luto@kernel.org> > > diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig > > index 49270655e827..750f9b896e4f 100644 > > --- a/arch/x86/Kconfig > > +++ b/arch/x86/Kconfig > > @@ -141,6 +141,7 @@ config X86 > > select GENERIC_IRQ_PROBE > > select GENERIC_IRQ_RESERVATION_MODE > > select GENERIC_IRQ_SHOW > > + select GENERIC_LIB_X86 > > select GENERIC_PENDING_IRQ if SMP > > select GENERIC_PTDUMP > > select GENERIC_SMP_IDLE_THREAD > > diff --git a/arch/x86/include/asm/cpu.h > > b/arch/x86/include/asm/cpu.h > > index 33d41e350c79..2a663a05a795 100644 > > --- a/arch/x86/include/asm/cpu.h > > +++ b/arch/x86/include/asm/cpu.h > > @@ -37,9 +37,6 @@ extern int _debug_hotplug_cpu(int cpu, int > > action); > > > > int mwait_usable(const struct cpuinfo_x86 *); > > > > -unsigned int x86_family(unsigned int sig); > > -unsigned int x86_model(unsigned int sig); > > -unsigned int x86_stepping(unsigned int sig); > > #ifdef CONFIG_CPU_SUP_INTEL > > extern void __init sld_setup(struct cpuinfo_x86 *c); > > extern void switch_to_sld(unsigned long tifn); > > diff --git a/arch/x86/include/asm/microcode.h > > b/arch/x86/include/asm/microcode.h > > index ab45a220fac4..4b0eabf63b98 100644 > > --- a/arch/x86/include/asm/microcode.h > > +++ b/arch/x86/include/asm/microcode.h > > @@ -2,9 +2,9 @@ > > #ifndef _ASM_X86_MICROCODE_H > > #define _ASM_X86_MICROCODE_H > > > > -#include <asm/cpu.h> > > #include <linux/earlycpio.h> > > #include <linux/initrd.h> > > +#include <linux/x86/cpu.h> > > Has this patch set received a build success notification from the > kbuild robot? I.e. are you sure that this include was only here for > the > > unsigned int x86_family(unsigned int sig); > unsigned int x86_model(unsigned int sig); > unsigned int x86_stepping(unsigned int sig); > > ...helpers. All the other replacements look trivially verifiable as > only needing these 3 helpers. > > > > > struct ucode_patch { > > struct list_head plist; > > diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h > > index c99edfff7f82..bf070d2a2175 100644 > > --- a/arch/x86/kvm/cpuid.h > > +++ b/arch/x86/kvm/cpuid.h > > @@ -4,10 +4,11 @@ > > > > #include "x86.h" > > #include "reverse_cpuid.h" > > -#include <asm/cpu.h> > > #include <asm/processor.h> > > #include <uapi/asm/kvm_para.h> > > > > +#include <linux/x86/cpu.h> > > + > > extern u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly; > > void kvm_set_cpu_caps(void); > > > > diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile > > index bad4dee4f0e4..fd73c1b72c3e 100644 > > --- a/arch/x86/lib/Makefile > > +++ b/arch/x86/lib/Makefile > > @@ -41,7 +41,7 @@ clean-files := inat-tables.c > > > > obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o > > > > -lib-y := delay.o misc.o cmdline.o cpu.o > > +lib-y := delay.o misc.o cmdline.o > > lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o > > lib-y += memcpy_$(BITS).o > > lib-$(CONFIG_ARCH_HAS_COPY_MC) += copy_mc.o copy_mc_64.o > > diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c > > index 27d56920b469..f545f5fad02c 100644 > > --- a/drivers/edac/mce_amd.c > > +++ b/drivers/edac/mce_amd.c > > @@ -1,8 +1,7 @@ > > // SPDX-License-Identifier: GPL-2.0-only > > #include <linux/module.h> > > #include <linux/slab.h> > > - > > -#include <asm/cpu.h> > > +#include <linux/x86/cpu.h> > > > > #include "mce_amd.h" > > > > diff --git a/include/linux/x86/cpu.h b/include/linux/x86/cpu.h > > new file mode 100644 > > index 000000000000..5f383d47886d > > --- /dev/null > > +++ b/include/linux/x86/cpu.h > > @@ -0,0 +1,9 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +#ifndef _LINUX_X86_CPU_H > > +#define _LINUX_X86_CPU_H > > + > > +unsigned int x86_family(unsigned int sig); > > +unsigned int x86_model(unsigned int sig); > > +unsigned int x86_stepping(unsigned int sig); > > + > > +#endif /* _LINUX_X86_CPU_H */ > > diff --git a/lib/Kconfig b/lib/Kconfig > > index d241fe476fda..cc28bc1f2d84 100644 > > --- a/lib/Kconfig > > +++ b/lib/Kconfig > > @@ -718,3 +718,8 @@ config PLDMFW > > > > config ASN1_ENCODER > > tristate > > + > > +config GENERIC_LIB_X86 > > + bool > > + depends on X86 > > + default n > > No need for a "default n" line. Omitting a default is the same as > "default n". >
On Thu, 2021-07-15 at 16:51 +0000, Winiarska, Iwona wrote: > On Wed, 2021-07-14 at 16:58 +0000, Williams, Dan J wrote: > > On Tue, 2021-07-13 at 00:04 +0200, Iwona Winiarska wrote: > > > diff --git a/arch/x86/include/asm/cpu.h > > > b/arch/x86/include/asm/cpu.h > > > index 33d41e350c79..2a663a05a795 100644 > > > --- a/arch/x86/include/asm/cpu.h > > > +++ b/arch/x86/include/asm/cpu.h > > > @@ -37,9 +37,6 @@ extern int _debug_hotplug_cpu(int cpu, int > > > action); > > > > > > int mwait_usable(const struct cpuinfo_x86 *); > > > > > > -unsigned int x86_family(unsigned int sig); > > > -unsigned int x86_model(unsigned int sig); > > > -unsigned int x86_stepping(unsigned int sig); > > > #ifdef CONFIG_CPU_SUP_INTEL > > > extern void __init sld_setup(struct cpuinfo_x86 *c); > > > extern void switch_to_sld(unsigned long tifn); > > > diff --git a/arch/x86/include/asm/microcode.h > > > b/arch/x86/include/asm/microcode.h > > > index ab45a220fac4..4b0eabf63b98 100644 > > > --- a/arch/x86/include/asm/microcode.h > > > +++ b/arch/x86/include/asm/microcode.h > > > @@ -2,9 +2,9 @@ > > > #ifndef _ASM_X86_MICROCODE_H > > > #define _ASM_X86_MICROCODE_H > > > > > > -#include <asm/cpu.h> > > > #include <linux/earlycpio.h> > > > #include <linux/initrd.h> > > > +#include <linux/x86/cpu.h> > > > > Has this patch set received a build success notification from the > > kbuild robot? I.e. are you sure that this include was only here for > > the > > > > unsigned int x86_family(unsigned int sig); > > unsigned int x86_model(unsigned int sig); > > unsigned int x86_stepping(unsigned int sig); > > > > ...helpers. All the other replacements look trivially verifiable as > > only needing these 3 helpers. Missed the rest of your email in my previous post - sorry. Yes - and before that I ran this through allyesconfig on x86. > > > > > > > > struct ucode_patch { > > > struct list_head plist; > > > diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h > > > index c99edfff7f82..bf070d2a2175 100644 > > > --- a/arch/x86/kvm/cpuid.h > > > +++ b/arch/x86/kvm/cpuid.h > > > @@ -4,10 +4,11 @@ > > > > > > #include "x86.h" > > > #include "reverse_cpuid.h" > > > -#include <asm/cpu.h> > > > #include <asm/processor.h> > > > #include <uapi/asm/kvm_para.h> > > > > > > +#include <linux/x86/cpu.h> > > > + > > > extern u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly; > > > void kvm_set_cpu_caps(void); > > > > > > diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile > > > index bad4dee4f0e4..fd73c1b72c3e 100644 > > > --- a/arch/x86/lib/Makefile > > > +++ b/arch/x86/lib/Makefile > > > @@ -41,7 +41,7 @@ clean-files := inat-tables.c > > > > > > obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o > > > > > > -lib-y := delay.o misc.o cmdline.o cpu.o > > > +lib-y := delay.o misc.o cmdline.o > > > lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o > > > lib-y += memcpy_$(BITS).o > > > lib-$(CONFIG_ARCH_HAS_COPY_MC) += copy_mc.o copy_mc_64.o > > > diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c > > > index 27d56920b469..f545f5fad02c 100644 > > > --- a/drivers/edac/mce_amd.c > > > +++ b/drivers/edac/mce_amd.c > > > @@ -1,8 +1,7 @@ > > > // SPDX-License-Identifier: GPL-2.0-only > > > #include <linux/module.h> > > > #include <linux/slab.h> > > > - > > > -#include <asm/cpu.h> > > > +#include <linux/x86/cpu.h> > > > > > > #include "mce_amd.h" > > > > > > diff --git a/include/linux/x86/cpu.h b/include/linux/x86/cpu.h > > > new file mode 100644 > > > index 000000000000..5f383d47886d > > > --- /dev/null > > > +++ b/include/linux/x86/cpu.h > > > @@ -0,0 +1,9 @@ > > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > > +#ifndef _LINUX_X86_CPU_H > > > +#define _LINUX_X86_CPU_H > > > + > > > +unsigned int x86_family(unsigned int sig); > > > +unsigned int x86_model(unsigned int sig); > > > +unsigned int x86_stepping(unsigned int sig); > > > + > > > +#endif /* _LINUX_X86_CPU_H */ > > > diff --git a/lib/Kconfig b/lib/Kconfig > > > index d241fe476fda..cc28bc1f2d84 100644 > > > --- a/lib/Kconfig > > > +++ b/lib/Kconfig > > > @@ -718,3 +718,8 @@ config PLDMFW > > > > > > config ASN1_ENCODER > > > tristate > > > + > > > +config GENERIC_LIB_X86 > > > + bool > > > + depends on X86 > > > + default n > > > > No need for a "default n" line. Omitting a default is the same as > > "default n". Sure - I'll fix this in v2. Thanks -Iwona > > >
diff --git a/MAINTAINERS b/MAINTAINERS index ec5987a00800..6f77aaca2a30 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20081,6 +20081,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core F: Documentation/devicetree/bindings/x86/ F: Documentation/x86/ F: arch/x86/ +F: include/linux/x86/ +F: lib/x86/ X86 ENTRY CODE M: Andy Lutomirski <luto@kernel.org> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 49270655e827..750f9b896e4f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -141,6 +141,7 @@ config X86 select GENERIC_IRQ_PROBE select GENERIC_IRQ_RESERVATION_MODE select GENERIC_IRQ_SHOW + select GENERIC_LIB_X86 select GENERIC_PENDING_IRQ if SMP select GENERIC_PTDUMP select GENERIC_SMP_IDLE_THREAD diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 33d41e350c79..2a663a05a795 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -37,9 +37,6 @@ extern int _debug_hotplug_cpu(int cpu, int action); int mwait_usable(const struct cpuinfo_x86 *); -unsigned int x86_family(unsigned int sig); -unsigned int x86_model(unsigned int sig); -unsigned int x86_stepping(unsigned int sig); #ifdef CONFIG_CPU_SUP_INTEL extern void __init sld_setup(struct cpuinfo_x86 *c); extern void switch_to_sld(unsigned long tifn); diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index ab45a220fac4..4b0eabf63b98 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -2,9 +2,9 @@ #ifndef _ASM_X86_MICROCODE_H #define _ASM_X86_MICROCODE_H -#include <asm/cpu.h> #include <linux/earlycpio.h> #include <linux/initrd.h> +#include <linux/x86/cpu.h> struct ucode_patch { struct list_head plist; diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index c99edfff7f82..bf070d2a2175 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -4,10 +4,11 @@ #include "x86.h" #include "reverse_cpuid.h" -#include <asm/cpu.h> #include <asm/processor.h> #include <uapi/asm/kvm_para.h> +#include <linux/x86/cpu.h> + extern u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly; void kvm_set_cpu_caps(void); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index bad4dee4f0e4..fd73c1b72c3e 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -41,7 +41,7 @@ clean-files := inat-tables.c obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o -lib-y := delay.o misc.o cmdline.o cpu.o +lib-y := delay.o misc.o cmdline.o lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o lib-y += memcpy_$(BITS).o lib-$(CONFIG_ARCH_HAS_COPY_MC) += copy_mc.o copy_mc_64.o diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c index 27d56920b469..f545f5fad02c 100644 --- a/drivers/edac/mce_amd.c +++ b/drivers/edac/mce_amd.c @@ -1,8 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/module.h> #include <linux/slab.h> - -#include <asm/cpu.h> +#include <linux/x86/cpu.h> #include "mce_amd.h" diff --git a/include/linux/x86/cpu.h b/include/linux/x86/cpu.h new file mode 100644 index 000000000000..5f383d47886d --- /dev/null +++ b/include/linux/x86/cpu.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _LINUX_X86_CPU_H +#define _LINUX_X86_CPU_H + +unsigned int x86_family(unsigned int sig); +unsigned int x86_model(unsigned int sig); +unsigned int x86_stepping(unsigned int sig); + +#endif /* _LINUX_X86_CPU_H */ diff --git a/lib/Kconfig b/lib/Kconfig index d241fe476fda..cc28bc1f2d84 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -718,3 +718,8 @@ config PLDMFW config ASN1_ENCODER tristate + +config GENERIC_LIB_X86 + bool + depends on X86 + default n diff --git a/lib/Makefile b/lib/Makefile index 5efd1b435a37..befbd9413432 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -360,3 +360,5 @@ obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o + +obj-$(CONFIG_GENERIC_LIB_X86) += x86/ diff --git a/lib/x86/Makefile b/lib/x86/Makefile new file mode 100644 index 000000000000..342024c272fc --- /dev/null +++ b/lib/x86/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-y := cpu.o diff --git a/arch/x86/lib/cpu.c b/lib/x86/cpu.c similarity index 95% rename from arch/x86/lib/cpu.c rename to lib/x86/cpu.c index 7ad68917a51e..17af59a2fddf 100644 --- a/arch/x86/lib/cpu.c +++ b/lib/x86/cpu.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/types.h> #include <linux/export.h> -#include <asm/cpu.h> +#include <linux/x86/cpu.h> unsigned int x86_family(unsigned int sig) {