Message ID | 20210917211811.39271-4-pauk.denis@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | hwmon: Support access to the NCT677x via Asus WMI. | expand |
On 9/17/21 2:18 PM, Denis Pauk wrote: > Support accessing the NCT677x via Asus WMI functions. > > On mainboards that support this way of accessing the chip, the driver will > usually not work without this option since in these mainboards, ACPI will > mark the I/O port as used. > > Code uses ACPI firmware interface to communicate with sensors with ASUS > motherboards: > * PRIME B460-PLUS, > * ROG CROSSHAIR VIII IMPACT, > * ROG STRIX B550-E GAMING, > * ROG STRIX B550-F GAMING, > * ROG STRIX B550-F GAMING (WI-FI), > * ROG STRIX Z490-I GAMING, > * TUF GAMING B550M-PLUS, > * TUF GAMING B550M-PLUS (WI-FI), > * TUF GAMING B550-PLUS, > * TUF GAMING X570-PLUS, > * TUF GAMING X570-PRO (WI-FI). > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 > Signed-off-by: Denis Pauk <pauk.denis@gmail.com> > Co-developed-by: Bernhard Seibold <mail@bernhard-seibold.de> > Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> > Tested-by: Pär Ekholm <pehlm@pekholm.org> > Tested-by: <to.eivind@gmail.com> > Tested-by: Artem S. Tashkinov <aros@gmx.com> > Tested-by: Vittorio Roberto Alfieri <me@rebtoor.com> > Tested-by: Sahan Fernando <sahan.h.fernando@gmail.com> > Cc: Andy Shevchenko <andriy.shevchenko@intel.com> > Cc: Guenter Roeck <linux@roeck-us.net> > > --- > Changes in v8: > - Rename asuswmi_evaluate_method() to nct6775_asuswmi_evaluate_method(). > - Add out error message if WMI method is failed. > - Stop futher read/write if first operation is failed. > > Changes in v7: > - Remove unrequred & 0xff with int8 variables. > - Make ASUSWMI_UNSUPPORTED_METHOD as default value for WMI responce, > before run wmi_evaluate_method(). > - Rename ASUSWMI_MGMT2_GUID to ASUSWMI_MONITORING_GUID. > - Replace checks of 'err != -EINVAL' with 'err >= 0' for match_string result. > > Changes in v6: > - Minimaze codes inside code inside defined(CONFIG_ACPI_WMI). > > Changes in v5: > - Use IS_ENABLED(CONFIG_ACPI_WMI) instead defined(CONFIG_ACPI_WMI) > > Changes in v4: > - Fix build without ACPI WMI. > > Changes in v3: > - Remove unrequired type conversions. > - Save result of match_string before check. > > Changes in v2: > - Split changes to separate patches. > - Limit WMI usage by DMI_BOARD_NAME in checked ASUS motherboards. > --- > drivers/hwmon/Kconfig | 1 + > drivers/hwmon/nct6775.c | 256 ++++++++++++++++++++++++++++++++++++---- > 2 files changed, 236 insertions(+), 21 deletions(-) > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index e3675377bc5d..9eefb1014b53 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1423,6 +1423,7 @@ config SENSORS_NCT6683 > config SENSORS_NCT6775 > tristate "Nuvoton NCT6775F and compatibles" > depends on !PPC > + depends on ACPI_WMI || ACPI_WMI=n > select HWMON_VID > help > If you say yes here you get support for the hardware monitoring > diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c > index 4253eed7f5b0..1f79546730e4 100644 > --- a/drivers/hwmon/nct6775.c > +++ b/drivers/hwmon/nct6775.c > @@ -55,6 +55,7 @@ > #include <linux/dmi.h> > #include <linux/io.h> > #include <linux/nospec.h> > +#include <linux/wmi.h> > #include "lm75.h" > > #define USE_ALTERNATE > @@ -132,10 +133,13 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); > #define SIO_ID_MASK 0xFFF8 > > enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; > +enum sensor_access { access_direct, access_asuswmi }; > > struct nct6775_sio_data { > int sioreg; > + int ld; > enum kinds kind; > + enum sensor_access access; > > /* superio_() callbacks */ > void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); > @@ -145,6 +149,107 @@ struct nct6775_sio_data { > void (*sio_exit)(struct nct6775_sio_data *sio_data); > }; > > +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" > +#define ASUSWMI_METHODID_RSIO 0x5253494F > +#define ASUSWMI_METHODID_WSIO 0x5753494F > +#define ASUSWMI_METHODID_RHWM 0x5248574D > +#define ASUSWMI_METHODID_WHWM 0x5748574D > +#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE > + > +static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) > +{ > +#if IS_ENABLED(CONFIG_ACPI_WMI) > + u32 args = bank | (reg << 8) | (val << 16); > + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; > + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; > + acpi_status status; > + union acpi_object *obj; > + u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; > + > + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, > + method_id, &input, &output); > + > + if (ACPI_FAILURE(status)) > + return -EIO; > + > + obj = output.pointer; > + if (obj && obj->type == ACPI_TYPE_INTEGER) > + tmp = obj->integer.value; > + > + if (retval) > + *retval = tmp; > + > + kfree(obj); > + > + if (tmp == ASUSWMI_UNSUPPORTED_METHOD) > + return -ENODEV; > + return 0; > +#else > + return -EOPNOTSUPP; > +#endif > +} > + > +static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) > +{ > + int err; > + > + err = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, > + reg, val, NULL); > + if (err) > + pr_err("Failed to write %#x:%#x\n", bank, reg); > + Please avoid error message noise. Just return the error. Thanks, Guenter > + return err; > +} > + > +static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) > +{ > + u32 ret, tmp = 0; > + > + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, > + reg, 0, &tmp); > + if (ret) > + pr_err("Failed to read %#x:%#x\n", bank, reg); > + > + *val = tmp; > + return ret; > +} > + > +static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) > +{ > + int ret, tmp = 0; > + > + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, > + reg, 0, &tmp); > + if (ret) > + pr_err("Failed to inb %#x:%#x\n", sio_data->ld, reg); > + > + return tmp; > +} > + > +static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) > +{ > + int ret; > + > + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, > + reg, val, NULL); > + if (ret) > + pr_err("Failed to outb %#x:%#x\n", sio_data->ld, reg); > +} > + > +static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) > +{ > + sio_data->ld = ld; > +} > + > +static int superio_wmi_enter(struct nct6775_sio_data *sio_data) > +{ > + return 0; > +} > + > +static void superio_wmi_exit(struct nct6775_sio_data *sio_data) > +{ > +} > + > static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) > { > int ioreg = sio_data->sioreg; > @@ -207,6 +312,7 @@ static void superio_exit(struct nct6775_sio_data *sio_data) > > #define NCT6775_REG_BANK 0x4E > #define NCT6775_REG_CONFIG 0x40 > +#define NCT6775_PORT_CHIPID 0x58 > > /* > * Not currently used: > @@ -1423,6 +1529,54 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) > return false; > } > > +static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) > +{ > + u8 bank = reg >> 8; > + > + data->bank = bank; > +} > + > +static u16 nct6775_wmi_read_value(struct nct6775_data *data, u16 reg) > +{ > + int res, err, word_sized = is_word_sized(data, reg); > + u8 tmp = 0; > + > + nct6775_wmi_set_bank(data, reg); > + > + err = nct6775_asuswmi_read(data->bank, reg, &tmp); > + if (err) > + return 0; > + > + res = tmp; > + if (word_sized) { > + err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); > + if (err) > + return 0; > + > + res = (res << 8) + tmp; > + } > + return res; > +} > + > +static int nct6775_wmi_write_value(struct nct6775_data *data, u16 reg, u16 value) > +{ > + int res, word_sized = is_word_sized(data, reg); > + > + nct6775_wmi_set_bank(data, reg); > + > + if (word_sized) { > + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); > + if (res) > + return res; > + > + res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); > + } else { > + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); > + } > + > + return res; > +} > + > /* > * On older chips, only registers 0x50-0x5f are banked. > * On more recent chips, all registers are banked. > @@ -3818,10 +3972,12 @@ static int nct6775_probe(struct platform_device *pdev) > struct device *hwmon_dev; > int num_attr_groups = 0; > > - res = platform_get_resource(pdev, IORESOURCE_IO, 0); > - if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, > - DRVNAME)) > - return -EBUSY; > + if (sio_data->access == access_direct) { > + res = platform_get_resource(pdev, IORESOURCE_IO, 0); > + if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, > + DRVNAME)) > + return -EBUSY; > + } > > data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data), > GFP_KERNEL); > @@ -3830,9 +3986,16 @@ static int nct6775_probe(struct platform_device *pdev) > > data->kind = sio_data->kind; > data->sioreg = sio_data->sioreg; > - data->addr = res->start; > - data->read_value = nct6775_read_value; > - data->write_value = nct6775_write_value; > + > + if (sio_data->access == access_direct) { > + data->addr = res->start; > + data->read_value = nct6775_read_value; > + data->write_value = nct6775_write_value; > + } else { > + data->read_value = nct6775_wmi_read_value; > + data->write_value = nct6775_wmi_write_value; > + } > + > mutex_init(&data->update_lock); > data->name = nct6775_device_names[data->kind]; > data->bank = 0xff; /* Force initial bank selection */ > @@ -4743,6 +4906,7 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) > int err; > int addr; > > + sio_data->access = access_direct; > sio_data->sioreg = sioaddr; > > err = sio_data->sio_enter(sio_data); > @@ -4837,6 +5001,23 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) > */ > static struct platform_device *pdev[2]; > > +static const char * const asus_wmi_boards[] = { > + "PRIME B460-PLUS", > + "ROG CROSSHAIR VIII DARK HERO", > + "ROG CROSSHAIR VIII HERO", > + "ROG CROSSHAIR VIII IMPACT", > + "ROG STRIX B550-E GAMING", > + "ROG STRIX B550-F GAMING", > + "ROG STRIX B550-F GAMING (WI-FI)", > + "ROG STRIX Z490-I GAMING", > + "TUF GAMING B550M-PLUS", > + "TUF GAMING B550M-PLUS (WI-FI)", > + "TUF GAMING B550-PLUS", > + "TUF GAMING X570-PLUS", > + "TUF GAMING X570-PLUS (WI-FI)", > + "TUF GAMING X570-PRO (WI-FI)", > +}; > + > static int __init sensors_nct6775_init(void) > { > int i, err; > @@ -4845,11 +5026,32 @@ static int __init sensors_nct6775_init(void) > struct resource res; > struct nct6775_sio_data sio_data; > int sioaddr[2] = { 0x2e, 0x4e }; > + enum sensor_access access = access_direct; > + const char *board_vendor, *board_name; > + u8 tmp; > > err = platform_driver_register(&nct6775_driver); > if (err) > return err; > > + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); > + board_name = dmi_get_system_info(DMI_BOARD_NAME); > + > + if (board_name && board_vendor && > + !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { > + err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), > + board_name); > + if (err >= 0) { > + /* if reading chip id via WMI succeeds, use WMI */ > + if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) { > + pr_info("Using Asus WMI to access %#x chip.\n", tmp); > + access = access_asuswmi; > + } else { > + pr_err("Can't read ChipID by Asus WMI.\n"); > + } > + } > + } > + > /* > * initialize sio_data->kind and sio_data->sioreg. > * > @@ -4870,6 +5072,16 @@ static int __init sensors_nct6775_init(void) > > found = true; > > + sio_data.access = access; > + > + if (access == access_asuswmi) { > + sio_data.sio_outb = superio_wmi_outb; > + sio_data.sio_inb = superio_wmi_inb; > + sio_data.sio_select = superio_wmi_select; > + sio_data.sio_enter = superio_wmi_enter; > + sio_data.sio_exit = superio_wmi_exit; > + } > + > pdev[i] = platform_device_alloc(DRVNAME, address); > if (!pdev[i]) { > err = -ENOMEM; > @@ -4881,23 +5093,25 @@ static int __init sensors_nct6775_init(void) > if (err) > goto exit_device_put; > > - memset(&res, 0, sizeof(res)); > - res.name = DRVNAME; > - res.start = address + IOREGION_OFFSET; > - res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; > - res.flags = IORESOURCE_IO; > + if (sio_data.access == access_direct) { > + memset(&res, 0, sizeof(res)); > + res.name = DRVNAME; > + res.start = address + IOREGION_OFFSET; > + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; > + res.flags = IORESOURCE_IO; > + > + err = acpi_check_resource_conflict(&res); > + if (err) { > + platform_device_put(pdev[i]); > + pdev[i] = NULL; > + continue; > + } > > - err = acpi_check_resource_conflict(&res); > - if (err) { > - platform_device_put(pdev[i]); > - pdev[i] = NULL; > - continue; > + err = platform_device_add_resources(pdev[i], &res, 1); > + if (err) > + goto exit_device_put; > } > > - err = platform_device_add_resources(pdev[i], &res, 1); > - if (err) > - goto exit_device_put; > - > /* platform_device_add calls probe() */ > err = platform_device_add(pdev[i]); > if (err) >
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index e3675377bc5d..9eefb1014b53 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1423,6 +1423,7 @@ config SENSORS_NCT6683 config SENSORS_NCT6775 tristate "Nuvoton NCT6775F and compatibles" depends on !PPC + depends on ACPI_WMI || ACPI_WMI=n select HWMON_VID help If you say yes here you get support for the hardware monitoring diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 4253eed7f5b0..1f79546730e4 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -55,6 +55,7 @@ #include <linux/dmi.h> #include <linux/io.h> #include <linux/nospec.h> +#include <linux/wmi.h> #include "lm75.h" #define USE_ALTERNATE @@ -132,10 +133,13 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define SIO_ID_MASK 0xFFF8 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; +enum sensor_access { access_direct, access_asuswmi }; struct nct6775_sio_data { int sioreg; + int ld; enum kinds kind; + enum sensor_access access; /* superio_() callbacks */ void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); @@ -145,6 +149,107 @@ struct nct6775_sio_data { void (*sio_exit)(struct nct6775_sio_data *sio_data); }; +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" +#define ASUSWMI_METHODID_RSIO 0x5253494F +#define ASUSWMI_METHODID_WSIO 0x5753494F +#define ASUSWMI_METHODID_RHWM 0x5248574D +#define ASUSWMI_METHODID_WHWM 0x5748574D +#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE + +static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) +{ +#if IS_ENABLED(CONFIG_ACPI_WMI) + u32 args = bank | (reg << 8) | (val << 16); + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + union acpi_object *obj; + u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; + + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, + method_id, &input, &output); + + if (ACPI_FAILURE(status)) + return -EIO; + + obj = output.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + tmp = obj->integer.value; + + if (retval) + *retval = tmp; + + kfree(obj); + + if (tmp == ASUSWMI_UNSUPPORTED_METHOD) + return -ENODEV; + return 0; +#else + return -EOPNOTSUPP; +#endif +} + +static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) +{ + int err; + + err = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, + reg, val, NULL); + if (err) + pr_err("Failed to write %#x:%#x\n", bank, reg); + + return err; +} + +static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) +{ + u32 ret, tmp = 0; + + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, + reg, 0, &tmp); + if (ret) + pr_err("Failed to read %#x:%#x\n", bank, reg); + + *val = tmp; + return ret; +} + +static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) +{ + int ret, tmp = 0; + + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, + reg, 0, &tmp); + if (ret) + pr_err("Failed to inb %#x:%#x\n", sio_data->ld, reg); + + return tmp; +} + +static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) +{ + int ret; + + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, + reg, val, NULL); + if (ret) + pr_err("Failed to outb %#x:%#x\n", sio_data->ld, reg); +} + +static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) +{ + sio_data->ld = ld; +} + +static int superio_wmi_enter(struct nct6775_sio_data *sio_data) +{ + return 0; +} + +static void superio_wmi_exit(struct nct6775_sio_data *sio_data) +{ +} + static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) { int ioreg = sio_data->sioreg; @@ -207,6 +312,7 @@ static void superio_exit(struct nct6775_sio_data *sio_data) #define NCT6775_REG_BANK 0x4E #define NCT6775_REG_CONFIG 0x40 +#define NCT6775_PORT_CHIPID 0x58 /* * Not currently used: @@ -1423,6 +1529,54 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) return false; } +static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) +{ + u8 bank = reg >> 8; + + data->bank = bank; +} + +static u16 nct6775_wmi_read_value(struct nct6775_data *data, u16 reg) +{ + int res, err, word_sized = is_word_sized(data, reg); + u8 tmp = 0; + + nct6775_wmi_set_bank(data, reg); + + err = nct6775_asuswmi_read(data->bank, reg, &tmp); + if (err) + return 0; + + res = tmp; + if (word_sized) { + err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); + if (err) + return 0; + + res = (res << 8) + tmp; + } + return res; +} + +static int nct6775_wmi_write_value(struct nct6775_data *data, u16 reg, u16 value) +{ + int res, word_sized = is_word_sized(data, reg); + + nct6775_wmi_set_bank(data, reg); + + if (word_sized) { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); + if (res) + return res; + + res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); + } else { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); + } + + return res; +} + /* * On older chips, only registers 0x50-0x5f are banked. * On more recent chips, all registers are banked. @@ -3818,10 +3972,12 @@ static int nct6775_probe(struct platform_device *pdev) struct device *hwmon_dev; int num_attr_groups = 0; - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, - DRVNAME)) - return -EBUSY; + if (sio_data->access == access_direct) { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, + DRVNAME)) + return -EBUSY; + } data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data), GFP_KERNEL); @@ -3830,9 +3986,16 @@ static int nct6775_probe(struct platform_device *pdev) data->kind = sio_data->kind; data->sioreg = sio_data->sioreg; - data->addr = res->start; - data->read_value = nct6775_read_value; - data->write_value = nct6775_write_value; + + if (sio_data->access == access_direct) { + data->addr = res->start; + data->read_value = nct6775_read_value; + data->write_value = nct6775_write_value; + } else { + data->read_value = nct6775_wmi_read_value; + data->write_value = nct6775_wmi_write_value; + } + mutex_init(&data->update_lock); data->name = nct6775_device_names[data->kind]; data->bank = 0xff; /* Force initial bank selection */ @@ -4743,6 +4906,7 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) int err; int addr; + sio_data->access = access_direct; sio_data->sioreg = sioaddr; err = sio_data->sio_enter(sio_data); @@ -4837,6 +5001,23 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) */ static struct platform_device *pdev[2]; +static const char * const asus_wmi_boards[] = { + "PRIME B460-PLUS", + "ROG CROSSHAIR VIII DARK HERO", + "ROG CROSSHAIR VIII HERO", + "ROG CROSSHAIR VIII IMPACT", + "ROG STRIX B550-E GAMING", + "ROG STRIX B550-F GAMING", + "ROG STRIX B550-F GAMING (WI-FI)", + "ROG STRIX Z490-I GAMING", + "TUF GAMING B550M-PLUS", + "TUF GAMING B550M-PLUS (WI-FI)", + "TUF GAMING B550-PLUS", + "TUF GAMING X570-PLUS", + "TUF GAMING X570-PLUS (WI-FI)", + "TUF GAMING X570-PRO (WI-FI)", +}; + static int __init sensors_nct6775_init(void) { int i, err; @@ -4845,11 +5026,32 @@ static int __init sensors_nct6775_init(void) struct resource res; struct nct6775_sio_data sio_data; int sioaddr[2] = { 0x2e, 0x4e }; + enum sensor_access access = access_direct; + const char *board_vendor, *board_name; + u8 tmp; err = platform_driver_register(&nct6775_driver); if (err) return err; + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && board_vendor && + !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { + err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), + board_name); + if (err >= 0) { + /* if reading chip id via WMI succeeds, use WMI */ + if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) { + pr_info("Using Asus WMI to access %#x chip.\n", tmp); + access = access_asuswmi; + } else { + pr_err("Can't read ChipID by Asus WMI.\n"); + } + } + } + /* * initialize sio_data->kind and sio_data->sioreg. * @@ -4870,6 +5072,16 @@ static int __init sensors_nct6775_init(void) found = true; + sio_data.access = access; + + if (access == access_asuswmi) { + sio_data.sio_outb = superio_wmi_outb; + sio_data.sio_inb = superio_wmi_inb; + sio_data.sio_select = superio_wmi_select; + sio_data.sio_enter = superio_wmi_enter; + sio_data.sio_exit = superio_wmi_exit; + } + pdev[i] = platform_device_alloc(DRVNAME, address); if (!pdev[i]) { err = -ENOMEM; @@ -4881,23 +5093,25 @@ static int __init sensors_nct6775_init(void) if (err) goto exit_device_put; - memset(&res, 0, sizeof(res)); - res.name = DRVNAME; - res.start = address + IOREGION_OFFSET; - res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; - res.flags = IORESOURCE_IO; + if (sio_data.access == access_direct) { + memset(&res, 0, sizeof(res)); + res.name = DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) { + platform_device_put(pdev[i]); + pdev[i] = NULL; + continue; + } - err = acpi_check_resource_conflict(&res); - if (err) { - platform_device_put(pdev[i]); - pdev[i] = NULL; - continue; + err = platform_device_add_resources(pdev[i], &res, 1); + if (err) + goto exit_device_put; } - err = platform_device_add_resources(pdev[i], &res, 1); - if (err) - goto exit_device_put; - /* platform_device_add calls probe() */ err = platform_device_add(pdev[i]); if (err)