dt-bindings: hwmon: lm90: convert to dtschema

Commit Message

Krzysztof Kozlowski Sept. 20, 2021, 2:05 p.m. UTC

Convert the National LM90 hwmon sensor bindings to DT schema format.

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
---
 .../devicetree/bindings/hwmon/lm90.txt        | 51 ------------
 .../bindings/hwmon/national,lm90.yaml         | 79 +++++++++++++++++++
 MAINTAINERS                                   |  2 +-
 3 files changed, 80 insertions(+), 52 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/national,lm90.yaml

Comments

Krzysztof Kozlowski Sept. 20, 2021, 5:22 p.m. UTC | #1

On 20/09/2021 16:05, Krzysztof Kozlowski wrote:
> Convert the National LM90 hwmon sensor bindings to DT schema format.
> 
> Signed-off-by: Krzysztof Kozlowski <[e-mail]>
> ---
>  .../devicetree/bindings/hwmon/lm90.txt        | 51 ------------
>  .../bindings/hwmon/national,lm90.yaml         | 79 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 80 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/lm90.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/national,lm90.yaml
> 

I will send a v2 because few devices are on trivial-devices list.

Best regards,
Krzysztof

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
deleted file mode 100644
index 398dcb965751..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm90.txt
+++ /dev/null
@@ -1,51 +0,0 @@ 
-* LM90 series thermometer.
-
-Required node properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adm1032"
-		"adi,adt7461"
-		"adi,adt7461a"
-		"gmt,g781"
-		"national,lm90"
-		"national,lm86"
-		"national,lm89"
-		"national,lm99"
-		"dallas,max6646"
-		"dallas,max6647"
-		"dallas,max6649"
-		"dallas,max6657"
-		"dallas,max6658"
-		"dallas,max6659"
-		"dallas,max6680"
-		"dallas,max6681"
-		"dallas,max6695"
-		"dallas,max6696"
-		"onnn,nct1008"
-		"winbond,w83l771"
-		"nxp,sa56004"
-		"ti,tmp451"
-
-- reg: I2C bus address of the device
-
-- vcc-supply: vcc regulator for the supply voltage.
-
-Optional properties:
-- interrupts: Contains a single interrupt specifier which describes the
-              LM90 "-ALERT" pin output.
-              See interrupt-controller/interrupts.txt for the format.
-
-- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml
-	      for details. See <include/dt-bindings/thermal/lm90.h> for the
-	      definition of the local, remote and 2nd remote sensor index
-	      constants.
-
-Example LM90 node:
-
-temp-sensor {
-	compatible = "onnn,nct1008";
-	reg = <0x4c>;
-	vcc-supply = <&palmas_ldo6_reg>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
-	#thermal-sensor-cells = <1>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
new file mode 100644
index 000000000000..e712117da3df
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -0,0 +1,79 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM90 series thermometer
+
+maintainers:
+  - Jean Delvare <[e-mail]>
+  - Guenter Roeck <[e-mail]>
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1032
+      - adi,adt7461
+      - adi,adt7461a
+      - dallas,max6646
+      - dallas,max6647
+      - dallas,max6649
+      - dallas,max6657
+      - dallas,max6658
+      - dallas,max6659
+      - dallas,max6680
+      - dallas,max6681
+      - dallas,max6695
+      - dallas,max6696
+      - gmt,g781
+      - national,lm86
+      - national,lm89
+      - national,lm90
+      - national,lm99
+      - nxp,sa56004
+      - onnn,nct1008
+      - ti,tmp451
+      - winbond,w83l771
+
+
+  interrupts:
+    items:
+      - description: |
+          Single interrupt specifier which describes the LM90 "-ALERT" pin
+          output.
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  vcc-supply:
+    description: phandle to the regulator that provides the +VCC supply
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "onnn,nct1008";
+            reg = <0x4c>;
+            vcc-supply = <&palmas_ldo6_reg>;
+            interrupt-parent = <&gpio>;
+            interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2b990794ec35..b07679009af2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10928,7 +10928,7 @@  LM90 HARDWARE MONITOR DRIVER
 M:	Jean Delvare <[e-mail]>
 L:	[e-mail]
 S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/lm90.txt
+F:	Documentation/devicetree/bindings/hwmon/national,lm90.yaml
 F:	Documentation/hwmon/lm90.rst
 F:	drivers/hwmon/lm90.c
 F:	include/dt-bindings/thermal/lm90.h