diff mbox series

[1/2] hwmon: add Delta AHE-50DC fan control module driver

Message ID 20211206224419.15736-2-zev@bewilderbeest.net (mailing list archive)
State Superseded
Headers show
Series hwmon: Add driver for Delta AHE-50DC fan control module | expand

Commit Message

Zev Weiss Dec. 6, 2021, 10:44 p.m. UTC
This device is an integrated module of the Delta AHE-50DC Open19 power
shelf.  For lack of proper documentation, this driver has been developed
referencing an existing (GPL) driver that was included in a code release
from LinkedIn [1].  It provides four fan speeds, four temperatures, and
one voltage reading, as well as a handful of warning and fault
indicators.

[1] https://github.com/linkedin/o19-bmc-firmware/blob/master/meta-openbmc/meta-linkedin/meta-deltapower/recipes-kernel/fancontrol-mod/files/fancontrol.c

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---
 MAINTAINERS                       |   6 +
 drivers/hwmon/Kconfig             |  11 ++
 drivers/hwmon/Makefile            |   1 +
 drivers/hwmon/delta-ahe50dc-fan.c | 265 ++++++++++++++++++++++++++++++
 4 files changed, 283 insertions(+)
 create mode 100644 drivers/hwmon/delta-ahe50dc-fan.c

Comments

Guenter Roeck Dec. 6, 2021, 11:02 p.m. UTC | #1
On 12/6/21 2:44 PM, Zev Weiss wrote:
> This device is an integrated module of the Delta AHE-50DC Open19 power
> shelf.  For lack of proper documentation, this driver has been developed
> referencing an existing (GPL) driver that was included in a code release
> from LinkedIn [1].  It provides four fan speeds, four temperatures, and
> one voltage reading, as well as a handful of warning and fault
> indicators.
> 
> [1] https://github.com/linkedin/o19-bmc-firmware/blob/master/meta-openbmc/meta-linkedin/meta-deltapower/recipes-kernel/fancontrol-mod/files/fancontrol.c
> 
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
> ---

[ ... ]

> +
> +static const u8 AHE50DC_FAN_TEMP_REGS[] = { 0x8d, 0x8e, 0x8f, 0xd0 };
> +static const u8 AHE50DC_FAN_SPEED_REGS[] = { 0x90, 0x91, 0x92, 0x93 };
> +static const u8 AHE50DC_FAN_FAN_STATUS_REGS[] = { 0x81, 0x82 };
> +#define AHE50DC_FAN_VIN_REG 0x88
> +#define AHE50DC_FAN_CHIP_STATUS_REG 0x79

PMBus registers:

	PMBUS_STATUS_WORD               = 0x79,

	PMBUS_STATUS_FAN_12             = 0x81,
	PMBUS_STATUS_FAN_34             = 0x82,

	PMBUS_READ_VIN                  = 0x88,

         PMBUS_READ_TEMPERATURE_1        = 0x8D,
         PMBUS_READ_TEMPERATURE_2        = 0x8E,
         PMBUS_READ_TEMPERATURE_3        = 0x8F,
         PMBUS_READ_FAN_SPEED_1          = 0x90,
         PMBUS_READ_FAN_SPEED_2          = 0x91,
         PMBUS_READ_FAN_SPEED_3          = 0x92,
         PMBUS_READ_FAN_SPEED_4          = 0x93,

This is quite obviously a PMBus device. Why not use the PMBus driver ?

Guenter
Zev Weiss Dec. 6, 2021, 11:05 p.m. UTC | #2
On Mon, Dec 06, 2021 at 03:02:49PM PST, Guenter Roeck wrote:
>On 12/6/21 2:44 PM, Zev Weiss wrote:
>>This device is an integrated module of the Delta AHE-50DC Open19 power
>>shelf.  For lack of proper documentation, this driver has been developed
>>referencing an existing (GPL) driver that was included in a code release
>>from LinkedIn [1].  It provides four fan speeds, four temperatures, and
>>one voltage reading, as well as a handful of warning and fault
>>indicators.
>>
>>[1] https://github.com/linkedin/o19-bmc-firmware/blob/master/meta-openbmc/meta-linkedin/meta-deltapower/recipes-kernel/fancontrol-mod/files/fancontrol.c
>>
>>Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
>>---
>
>[ ... ]
>
>>+
>>+static const u8 AHE50DC_FAN_TEMP_REGS[] = { 0x8d, 0x8e, 0x8f, 0xd0 };
>>+static const u8 AHE50DC_FAN_SPEED_REGS[] = { 0x90, 0x91, 0x92, 0x93 };
>>+static const u8 AHE50DC_FAN_FAN_STATUS_REGS[] = { 0x81, 0x82 };
>>+#define AHE50DC_FAN_VIN_REG 0x88
>>+#define AHE50DC_FAN_CHIP_STATUS_REG 0x79
>
>PMBus registers:
>
>	PMBUS_STATUS_WORD               = 0x79,
>
>	PMBUS_STATUS_FAN_12             = 0x81,
>	PMBUS_STATUS_FAN_34             = 0x82,
>
>	PMBUS_READ_VIN                  = 0x88,
>
>        PMBUS_READ_TEMPERATURE_1        = 0x8D,
>        PMBUS_READ_TEMPERATURE_2        = 0x8E,
>        PMBUS_READ_TEMPERATURE_3        = 0x8F,
>        PMBUS_READ_FAN_SPEED_1          = 0x90,
>        PMBUS_READ_FAN_SPEED_2          = 0x91,
>        PMBUS_READ_FAN_SPEED_3          = 0x92,
>        PMBUS_READ_FAN_SPEED_4          = 0x93,
>
>This is quite obviously a PMBus device. Why not use the PMBus driver ?
>
>Guenter

Ah, so it appears -- not familiar enough with the constants to recognize 
it immediately I suppose (and wasn't expecting PMBus on this particular 
device).  Let me try that.


Thanks,
Zev
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 0ac052200ecb..d3f54b6f9550 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5425,6 +5425,12 @@  W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/platform/sti/delta
 
+DELTA AHE-50DC FAN CONTROL MODULE DRIVER
+M:	Zev Weiss <zev@bewilderbeest.net>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/delta-ahe50dc-fan.c
+
 DELTA DPS920AB PSU DRIVER
 M:	Robert Marko <robert.marko@sartura.hr>
 L:	linux-hwmon@vger.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 43e5245874ad..394a9e99fedc 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -505,6 +505,17 @@  config SENSORS_DELL_SMM
 	  When option I8K is also enabled this driver provides legacy /proc/i8k
 	  userspace interface for i8kutils package.
 
+config SENSORS_DELTA_AHE50DC_FAN
+	tristate "Delta AHE-50DC fan control module"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the fan control
+	  module of the Delta AHE-50DC Open19 power shelf.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called delta-ahe50dc-fan.
+
 config SENSORS_DA9052_ADC
 	tristate "Dialog DA9052/DA9053 ADC"
 	depends on PMIC_DA9052
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3a1551b3d570..ea73ddab5fd3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -63,6 +63,7 @@  obj-$(CONFIG_SENSORS_CORSAIR_PSU) += corsair-psu.o
 obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
 obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o
 obj-$(CONFIG_SENSORS_DELL_SMM)	+= dell-smm-hwmon.o
+obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DRIVETEMP)	+= drivetemp.o
 obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
diff --git a/drivers/hwmon/delta-ahe50dc-fan.c b/drivers/hwmon/delta-ahe50dc-fan.c
new file mode 100644
index 000000000000..882dfccf146f
--- /dev/null
+++ b/drivers/hwmon/delta-ahe50dc-fan.c
@@ -0,0 +1,265 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Delta AHE-50DC power shelf fan control module driver
+ *
+ * Copyright 2021 Zev Weiss <zev@bewilderbeest.net>
+ */
+
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+static const u8 AHE50DC_FAN_TEMP_REGS[] = { 0x8d, 0x8e, 0x8f, 0xd0 };
+static const u8 AHE50DC_FAN_SPEED_REGS[] = { 0x90, 0x91, 0x92, 0x93 };
+static const u8 AHE50DC_FAN_FAN_STATUS_REGS[] = { 0x81, 0x82 };
+#define AHE50DC_FAN_VIN_REG 0x88
+#define AHE50DC_FAN_CHIP_STATUS_REG 0x79
+
+static int ahe50dc_fan_get_temp(struct regmap *regmap, int channel, long *val)
+{
+	int ret;
+	unsigned int reg;
+
+	if (channel >= ARRAY_SIZE(AHE50DC_FAN_TEMP_REGS))
+		return -EINVAL;
+
+	ret = regmap_read(regmap, AHE50DC_FAN_TEMP_REGS[channel], &reg);
+	if (ret < 0)
+		return ret;
+
+	/* Temp regs report tenths of a degree C; convert to millidegrees */
+	*val = reg * 100;
+
+	return 0;
+}
+
+static int ahe50dc_fan_get_fan(struct regmap *regmap, int channel, long *val)
+{
+	int ret;
+	unsigned int reg;
+
+	if (channel >= ARRAY_SIZE(AHE50DC_FAN_SPEED_REGS))
+		return -EINVAL;
+
+	ret = regmap_read(regmap, AHE50DC_FAN_SPEED_REGS[channel], &reg);
+	if (ret < 0)
+		return ret;
+
+	*val = reg;
+
+	return 0;
+}
+
+static int ahe50dc_fan_get_fan_status(struct regmap *regmap, int channel, u32 attr, long *val)
+{
+	int ret;
+	unsigned int reg, bit;
+	int regidx = channel / 2;
+
+	if (regidx >= ARRAY_SIZE(AHE50DC_FAN_FAN_STATUS_REGS) ||
+	    (attr != hwmon_fan_fault && attr != hwmon_fan_alarm))
+		return -EINVAL;
+
+	ret = regmap_read(regmap, AHE50DC_FAN_FAN_STATUS_REGS[regidx], &reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Fan status register bits:
+	 *   bit 0: fan 1/3 fault
+	 *   bit 1: fan 1/3 warn
+	 *   bit 8: fan 2/4 fault
+	 *   bit 9: fan 2/4 warn
+	 */
+	bit = ((channel % 2) * 8) + (attr == hwmon_fan_alarm);
+	*val = !!(reg & BIT(bit));
+
+	return 0;
+}
+
+static int ahe50dc_fan_get_vin(struct regmap *regmap, int channel, long *val)
+{
+	int ret;
+	unsigned int reg;
+
+	if (channel)
+		return -EINVAL;
+
+	ret = regmap_read(regmap, AHE50DC_FAN_VIN_REG, &reg);
+	if (ret < 0)
+		return ret;
+
+	*val = reg;
+
+	return 0;
+}
+
+static int ahe50dc_fan_get_chip_status(struct regmap *regmap, enum hwmon_sensor_types type,
+				       int channel, u32 attr, long *val)
+{
+	int ret;
+	unsigned int reg, bit;
+
+	if (type == hwmon_temp && attr == hwmon_temp_alarm && channel == 4)
+		bit = 2;
+	else if (type == hwmon_fan && attr == hwmon_fan_alarm && channel == 4)
+		bit = 11;
+	else if (type == hwmon_in && attr == hwmon_in_alarm && channel == 1)
+		bit = 15;
+	else
+		return -EINVAL;
+
+	ret = regmap_read(regmap, AHE50DC_FAN_CHIP_STATUS_REG, &reg);
+	if (ret < 0)
+		return ret;
+
+	*val = !!(reg & BIT(bit));
+
+	return 0;
+}
+
+static int ahe50dc_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			    int channel, long *val)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+			return ahe50dc_fan_get_temp(regmap, channel, val);
+		case hwmon_temp_alarm:
+			return ahe50dc_fan_get_chip_status(regmap, type, channel, attr, val);
+		default:
+			return -EOPNOTSUPP;
+		}
+
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			return ahe50dc_fan_get_fan(regmap, channel, val);
+		case hwmon_fan_alarm:
+		case hwmon_fan_fault:
+			if (channel == 4)
+				return ahe50dc_fan_get_chip_status(regmap, type, channel,
+								   attr, val);
+			return ahe50dc_fan_get_fan_status(regmap, channel, attr, val);
+		default:
+			return -EOPNOTSUPP;
+		}
+
+	case hwmon_in:
+		switch (attr) {
+		case hwmon_in_input:
+			return ahe50dc_fan_get_vin(regmap, channel, val);
+		case hwmon_in_alarm:
+			return ahe50dc_fan_get_chip_status(regmap, type, channel, attr, val);
+		default:
+			return -EOPNOTSUPP;
+		}
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int ahe50dc_fan_read_labels(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+				   int channel, const char **str)
+{
+	if (attr == hwmon_in_input && channel < 2) {
+		*str = channel ? "vout" : "vin";
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static umode_t ahe50dc_fan_is_visible(const void *data, enum hwmon_sensor_types type,
+				      u32 attr, int channel)
+{
+	return 0444;
+}
+
+static const struct hwmon_channel_info *ahe50dc_fan_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_INPUT,
+			   HWMON_T_ALARM),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ALARM,
+			   HWMON_F_ALARM),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_ALARM | HWMON_I_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops ahe50dc_fan_ops = {
+	.is_visible = ahe50dc_fan_is_visible,
+	.read = ahe50dc_fan_read,
+	.read_string = ahe50dc_fan_read_labels,
+};
+
+static const struct hwmon_chip_info ahe50dc_fan_chip_info = {
+	.ops = &ahe50dc_fan_ops,
+	.info = ahe50dc_fan_info,
+};
+
+static const struct regmap_config ahe50dc_fan_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int ahe50dc_fan_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+	struct device *hwmon_dev;
+	struct device *dev = &client->dev;
+
+	regmap = devm_regmap_init_i2c(client, &ahe50dc_fan_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	i2c_set_clientdata(client, regmap);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, regmap,
+							 &ahe50dc_fan_chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ahe50dc_fan_id[] = {
+	{ "ahe50dc_fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ahe50dc_fan_id);
+
+const struct of_device_id __maybe_unused ahe50dc_fan_of_match[] = {
+	{ .compatible = "delta,ahe50dc-fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ahe50dc_fan_of_match);
+
+static struct i2c_driver ahe50dc_fan_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "ahe50dc-fan",
+		.of_match_table = of_match_ptr(ahe50dc_fan_of_match),
+	},
+	.probe_new = ahe50dc_fan_probe,
+	.id_table = ahe50dc_fan_id,
+};
+module_i2c_driver(ahe50dc_fan_driver);
+
+MODULE_AUTHOR("Zev Weiss <zev@bewilderbeest.net>");
+MODULE_DESCRIPTION("Driver for Delta AHE-50DC power shelf fan control module");
+MODULE_LICENSE("GPL");