| Message ID | 20221031103809.20225-2-billy_tsai@aspeedtech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Support pwm/tach driver for aspeed ast26xx | expand |
On 31/10/2022 06:38, Billy Tsai wrote: > Unlike the old design that the register setting of the TACH should based Drop full stop in subject. Drop redundant, second "bindings" in subject. > on the configure of the PWM. In ast26xx, the dependency between pwm and > tach controller is eliminated and becomes a separate hardware block. They > only shared the same base address, source clock and reset. > This patch adds device binding for aspeed pwm-tach device which is a > multi-function device include pwm and tach function and pwm/tach device Do not use "This commit/patch". https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95 > bindings which should be the child-node of pwm-tach device. Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> > --- > .../bindings/hwmon/aspeed,ast2600-tach.yaml | 48 ++++++++++++ > .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 76 +++++++++++++++++++ > .../bindings/pwm/aspeed,ast2600-pwm.yaml | 64 ++++++++++++++++ Split per subsystem. And Cc necessary people... > 3 files changed, 188 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml > create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > create mode 100644 Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml > new file mode 100644 > index 000000000000..838200fae30e > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2021 Aspeed, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/aspeed,ast2600-tach.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Aspeed Ast2600 Tach controller > + > +maintainers: > + - Billy Tsai <billy_tsai@aspeedtech.com> > + > +description: | > + The Aspeed Tach controller can support upto 16 fan input. > + This module is part of the ast2600-pwm-tach multi-function device. For more > + details see ../mfd/aspeed,ast2600-pwm-tach.yaml. > + > +properties: > + compatible: > + enum: > + - aspeed,ast2600-tach > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + pinctrl-0: true > + > + pinctrl-names: > + const: default These should not be needed. > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + > +additionalProperties: Instead patternProperties and put them above "required:" > + type: object > + properties: > + reg: > + description: > + The tach channel used for this node. > + maxItems: 1 > + > + required: > + - reg additionalProperties on this level of indentation. > diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > new file mode 100644 > index 000000000000..1eaf6fab2752 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml > @@ -0,0 +1,76 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2021 Aspeed, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: PWM Tach controller Device Tree Bindings Drop "Device Tree Bindings" > + > +description: | > + The PWM Tach controller is represented as a multi-function device which > + includes: > + PWM > + Tach > + > +maintainers: > + - Billy Tsai <billy_tsai@aspeedtech.com> > + > +properties: > + compatible: > + items: > + - enum: > + - aspeed,ast2600-pwm-tach > + - const: syscon > + - const: simple-mfd > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - resets > + > +patternProperties: > + "^pwm(@[0-9a-f]+)?$": > + $ref: ../pwm/aspeed,ast2600-pwm.yaml Full path, so: /schemas/pwm/aspeed,ast2600-pwm.yaml Why unit addresses are optional? > + > + "^tach(@[0-9a-f]+)?$": > + $ref: ../hwmon/aspeed,ast2600-tach.yaml Ditto Why unit addresses are optional? > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/ast2600-clock.h> > + pwm_tach: pwm_tach@1e610000 { Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation No underscores in node names. > + compatible = "aspeed,ast2600-pwm-tach", "syscon", "simple-mfd"; > + reg = <0x1e610000 0x100>; > + clocks = <&syscon ASPEED_CLK_AHB>; > + resets = <&syscon ASPEED_RESET_PWM>; > + > + pwm: pwm { > + compatible = "aspeed,ast2600-pwm"; > + #address-cells = <1>; > + #size-cells = <0>; No need for address/size cells. No children. > + #pwm-cells = <3>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default>; > + }; > + > + tach: tach { > + compatible = "aspeed,ast2600-tach"; > + #address-cells = <1>; > + #size-cells = <0>; Ditto. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_tach0_default>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml > new file mode 100644 > index 000000000000..f501f8a769df > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml > @@ -0,0 +1,64 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright (C) 2021 Aspeed, Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pwm/aspeed,ast2600-pwm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Aspeed Ast2600 PWM controller > + > +maintainers: > + - Billy Tsai <billy_tsai@aspeedtech.com> > + > +description: | > + The Aspeed PWM controller can support upto 16 PWM outputs. s/can support/supports/ s/upto/up to/ > + This module is part of the ast2600-pwm-tach multi-function device. For more > + details see ../mfd/aspeed,ast2600-pwm-tach.yaml. > + Missing $ref to pwm.yaml > +properties: > + compatible: Below, same comments apply. This is incomplete review. Best regards, Krzysztof
On 2022/11/3, 5:20 AM, "Krzysztof Kozlowski" <krzk@kernel.org> wrote:
On 31/10/2022 06:38, Billy Tsai wrote:
> > +patternProperties:
> > + "^pwm(@[0-9a-f]+)?$":
> > + $ref: ../pwm/aspeed,ast2600-pwm.yaml
> Full path, so: /schemas/pwm/aspeed,ast2600-pwm.yaml
> Why unit addresses are optional?
> > +
> > + "^tach(@[0-9a-f]+)?$":
> > + $ref: ../hwmon/aspeed,ast2600-tach.yaml
> Ditto
> Why unit addresses are optional?
The pwm_tach is not the bus. I will use
pwm:
type: object
$ref: "/schemas/pwm/aspeed,ast2600-pwm.yaml"
tach:
type: object
$ref: "/schemas/hwmon/aspeed,ast2600-tach.yaml"
to replace it.
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/ast2600-clock.h>
> > + pwm_tach: pwm_tach@1e610000 {
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
This is the mfd with pwm and tach, so they are combined as the node name.
> No underscores in node names.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#table-1
I see that the underscore is the valid characters for node names.
Did I miss any information?
Thanks
Best Regards,
Billy Tsai
On 03/11/2022 06:36, Billy Tsai wrote: > > On 2022/11/3, 5:20 AM, "Krzysztof Kozlowski" <krzk@kernel.org> wrote: > > On 31/10/2022 06:38, Billy Tsai wrote: > > > +patternProperties: > > > + "^pwm(@[0-9a-f]+)?$": > > > + $ref: ../pwm/aspeed,ast2600-pwm.yaml > > > Full path, so: /schemas/pwm/aspeed,ast2600-pwm.yaml > > > Why unit addresses are optional? > > > > + > > > + "^tach(@[0-9a-f]+)?$": > > > + $ref: ../hwmon/aspeed,ast2600-tach.yaml > > > Ditto > > > Why unit addresses are optional? > > The pwm_tach is not the bus. I will use > pwm: > type: object > $ref: "/schemas/pwm/aspeed,ast2600-pwm.yaml" > > tach: > type: object > $ref: "/schemas/hwmon/aspeed,ast2600-tach.yaml" > to replace it. > > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/clock/ast2600-clock.h> > > > + pwm_tach: pwm_tach@1e610000 { > > > Node names should be generic. > > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > This is the mfd with pwm and tach, so they are combined as the node name. > > > No underscores in node names. > > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#table-1 > I see that the underscore is the valid characters for node names. > Did I miss any information? W=2 warnings. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml new file mode 100644 index 000000000000..838200fae30e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/aspeed,ast2600-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Ast2600 Tach controller + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + The Aspeed Tach controller can support upto 16 fan input. + This module is part of the ast2600-pwm-tach multi-function device. For more + details see ../mfd/aspeed,ast2600-pwm-tach.yaml. + +properties: + compatible: + enum: + - aspeed,ast2600-tach + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + pinctrl-0: true + + pinctrl-names: + const: default + +required: + - compatible + - "#address-cells" + - "#size-cells" + +additionalProperties: + type: object + properties: + reg: + description: + The tach channel used for this node. + maxItems: 1 + + required: + - reg diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml new file mode 100644 index 000000000000..1eaf6fab2752 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2600-pwm-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM Tach controller Device Tree Bindings + +description: | + The PWM Tach controller is represented as a multi-function device which + includes: + PWM + Tach + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +properties: + compatible: + items: + - enum: + - aspeed,ast2600-pwm-tach + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +patternProperties: + "^pwm(@[0-9a-f]+)?$": + $ref: ../pwm/aspeed,ast2600-pwm.yaml + + "^tach(@[0-9a-f]+)?$": + $ref: ../hwmon/aspeed,ast2600-tach.yaml + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + pwm_tach: pwm_tach@1e610000 { + compatible = "aspeed,ast2600-pwm-tach", "syscon", "simple-mfd"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + + pwm: pwm { + compatible = "aspeed,ast2600-pwm"; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default>; + }; + + tach: tach { + compatible = "aspeed,ast2600-tach"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tach0_default>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml new file mode 100644 index 000000000000..f501f8a769df --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2021 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/aspeed,ast2600-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Ast2600 PWM controller + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + The Aspeed PWM controller can support upto 16 PWM outputs. + This module is part of the ast2600-pwm-tach multi-function device. For more + details see ../mfd/aspeed,ast2600-pwm-tach.yaml. + +properties: + compatible: + enum: + - aspeed,ast2600-pwm + + "#pwm-cells": + const: 3 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + pinctrl-0: true + + pinctrl-names: + const: default + +required: + - compatible + - "#pwm-cells" + - "#address-cells" + - "#size-cells" + +additionalProperties: + description: Set extend properties for each pwm channel. + type: object + properties: + reg: + description: + The pwm channel index. + maxItems: 1 + + aspeed,wdt-reload-enable: + type: boolean + description: + Enable the function of wdt reset reload duty point. + + aspeed,wdt-reload-duty-point: + description: + Define the duty point after wdt reset, 0 = 100% + minimum: 0 + maximum: 255 + + required: + - reg
Unlike the old design that the register setting of the TACH should based on the configure of the PWM. In ast26xx, the dependency between pwm and tach controller is eliminated and becomes a separate hardware block. They only shared the same base address, source clock and reset. This patch adds device binding for aspeed pwm-tach device which is a multi-function device include pwm and tach function and pwm/tach device bindings which should be the child-node of pwm-tach device. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- .../bindings/hwmon/aspeed,ast2600-tach.yaml | 48 ++++++++++++ .../bindings/mfd/aspeed,ast2600-pwm-tach.yaml | 76 +++++++++++++++++++ .../bindings/pwm/aspeed,ast2600-pwm.yaml | 64 ++++++++++++++++ 3 files changed, 188 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,ast2600-tach.yaml create mode 100644 Documentation/devicetree/bindings/mfd/aspeed,ast2600-pwm-tach.yaml create mode 100644 Documentation/devicetree/bindings/pwm/aspeed,ast2600-pwm.yaml