| Message ID | 20230118172237.349111-2-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v2,1/2] dt-bindings: hwmon: adi,ltc2992: correct unit address in example | expand |
On Wed, Jan 18, 2023 at 06:22:37PM +0100, Krzysztof Kozlowski wrote: > Fix mixed indentation to 4-spaces, remove unnecessary suffix from > i2c node name and use lower-case hex. No functional impact. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Reviewed-by: Rob Herring <robh@kernel.org> Applied to hwmon-next. Thanks, Guenter > --- > > Changes since v1: > 1. Add Rb tag > 2. Reorder patches to silence warnings. > --- > .../bindings/hwmon/adi,adm1177.yaml | 12 ++--- > .../bindings/hwmon/adi,adm1266.yaml | 6 +-- > .../bindings/hwmon/adi,axi-fan-control.yaml | 20 ++++----- > .../bindings/hwmon/adi,ltc2947.yaml | 20 ++++----- > .../bindings/hwmon/adi,ltc2992.yaml | 26 +++++------ > .../devicetree/bindings/hwmon/amd,sbrmi.yaml | 6 +-- > .../devicetree/bindings/hwmon/amd,sbtsi.yaml | 6 +-- > .../devicetree/bindings/hwmon/iio-hwmon.yaml | 8 ++-- > .../bindings/hwmon/national,lm90.yaml | 44 +++++++++---------- > .../bindings/hwmon/ntc-thermistor.yaml | 2 +- > .../bindings/hwmon/nuvoton,nct7802.yaml | 16 +++---- > .../devicetree/bindings/hwmon/ti,tmp513.yaml | 22 +++++----- > .../bindings/hwmon/ti,tps23861.yaml | 16 +++---- > 13 files changed, 102 insertions(+), 102 deletions(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml > index d794deb08bb7..ca2b47320689 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml > @@ -52,16 +52,16 @@ examples: > - | > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/irq.h> > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > pwmon@5a { > - compatible = "adi,adm1177"; > - reg = <0x5a>; > - shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ > - adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ > - adi,vrange-high-enable; > + compatible = "adi,adm1177"; > + reg = <0x5a>; > + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ > + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ > + adi,vrange-high-enable; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml > index 43b4f4f57b49..4f8e11bd5142 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml > @@ -39,13 +39,13 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > adm1266@40 { > - compatible = "adi,adm1266"; > - reg = <0x40>; > + compatible = "adi,adm1266"; > + reg = <0x40>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > index f2f99afb3a3b..0cf3ed6212a6 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml > @@ -49,15 +49,15 @@ additionalProperties: false > examples: > - | > fpga_axi: fpga-axi { > - #address-cells = <0x2>; > - #size-cells = <0x1>; > - > - axi_fan_control: axi-fan-control@80000000 { > - compatible = "adi,axi-fan-control-1.00.a"; > - reg = <0x0 0x80000000 0x10000>; > - clocks = <&clk 71>; > - interrupts = <0 110 0>; > - pulses-per-revolution = <2>; > - }; > + #address-cells = <0x2>; > + #size-cells = <0x1>; > + > + axi_fan_control: axi-fan-control@80000000 { > + compatible = "adi,axi-fan-control-1.00.a"; > + reg = <0x0 0x80000000 0x10000>; > + clocks = <&clk 71>; > + interrupts = <0 110 0>; > + pulses-per-revolution = <2>; > + }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > index bf04151b63d2..152935334c76 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml > @@ -87,15 +87,15 @@ additionalProperties: false > examples: > - | > spi { > - #address-cells = <1>; > - #size-cells = <0>; > - > - ltc2947_spi: ltc2947@0 { > - compatible = "adi,ltc2947"; > - reg = <0>; > - /* accumulation takes place always for energ1/charge1. */ > - /* accumulation only on positive current for energy2/charge2. */ > - adi,accumulator-ctl-pol = <0 1>; > - }; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ltc2947_spi: ltc2947@0 { > + compatible = "adi,ltc2947"; > + reg = <0>; > + /* accumulation takes place always for energ1/charge1. */ > + /* accumulation only on positive current for energy2/charge2. */ > + adi,accumulator-ctl-pol = <0 1>; > + }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml > index ec984248219e..dba74f400bc2 100644 > --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml > +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml > @@ -55,26 +55,26 @@ additionalProperties: false > > examples: > - | > - i2c1 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > ltc2992@6f { > - #address-cells = <1>; > - #size-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > > - compatible = "adi,ltc2992"; > - reg = <0x6f>; > + compatible = "adi,ltc2992"; > + reg = <0x6f>; > > - channel@0 { > - reg = <0x0>; > - shunt-resistor-micro-ohms = <10000>; > - }; > + channel@0 { > + reg = <0x0>; > + shunt-resistor-micro-ohms = <10000>; > + }; > > - channel@1 { > - reg = <0x1>; > - shunt-resistor-micro-ohms = <10000>; > - }; > + channel@1 { > + reg = <0x1>; > + shunt-resistor-micro-ohms = <10000>; > + }; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml > index 7598b083979c..353d81d89bf5 100644 > --- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml > +++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml > @@ -41,13 +41,13 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > sbrmi@3c { > - compatible = "amd,sbrmi"; > - reg = <0x3c>; > + compatible = "amd,sbrmi"; > + reg = <0x3c>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml > index 446b09f1ce94..75088244a274 100644 > --- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml > +++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml > @@ -42,13 +42,13 @@ additionalProperties: false > > examples: > - | > - i2c0 { > + i2c { > #address-cells = <1>; > #size-cells = <0>; > > sbtsi@4c { > - compatible = "amd,sbtsi"; > - reg = <0x4c>; > + compatible = "amd,sbtsi"; > + reg = <0x4c>; > }; > }; > ... > diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml > index e1ccbd30e0eb..c54b5986b365 100644 > --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml > +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml > @@ -31,7 +31,7 @@ additionalProperties: false > > examples: > - | > - iio-hwmon { > - compatible = "iio-hwmon"; > - io-channels = <&adc 1>, <&adc 2>; > - }; > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc 1>, <&adc 2>; > + }; > diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml > index e1719839faf0..7b9d48d6d6da 100644 > --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml > +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml > @@ -198,30 +198,30 @@ examples: > }; > - | > i2c { > - #address-cells = <1>; > - #size-cells = <0>; > - > - sensor@4c { > - compatible = "adi,adt7481"; > - reg = <0x4c>; > #address-cells = <1>; > #size-cells = <0>; > > - channel@0 { > - reg = <0x0>; > - label = "local"; > - }; > - > - channel@1 { > - reg = <0x1>; > - label = "front"; > - temperature-offset-millicelsius = <4000>; > - }; > - > - channel@2 { > - reg = <0x2>; > - label = "back"; > - temperature-offset-millicelsius = <750>; > + sensor@4c { > + compatible = "adi,adt7481"; > + reg = <0x4c>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@0 { > + reg = <0x0>; > + label = "local"; > + }; > + > + channel@1 { > + reg = <0x1>; > + label = "front"; > + temperature-offset-millicelsius = <4000>; > + }; > + > + channel@2 { > + reg = <0x2>; > + label = "back"; > + temperature-offset-millicelsius = <750>; > + }; > }; > - }; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml > index 6a1920712fb9..3d0146e20d3e 100644 > --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml > +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml > @@ -131,7 +131,7 @@ additionalProperties: false > > examples: > - | > - thermistor0 { > + thermistor { > compatible = "murata,ncp18wb473"; > io-channels = <&gpadc 0x06>; > pullup-uv = <1800000>; > diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml > index 2f0620ecccc9..cd8dcd797031 100644 > --- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml > +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml > @@ -123,23 +123,23 @@ examples: > #size-cells = <0>; > > channel@0 { /* LTD */ > - reg = <0>; > + reg = <0>; > }; > > channel@1 { /* RTD1 */ > - reg = <1>; > - sensor-type = "voltage"; > + reg = <1>; > + sensor-type = "voltage"; > }; > > channel@2 { /* RTD2 */ > - reg = <2>; > - sensor-type = "temperature"; > - temperature-mode = "thermal-diode"; > + reg = <2>; > + sensor-type = "temperature"; > + temperature-mode = "thermal-diode"; > }; > > channel@3 { /* RTD3 */ > - reg = <3>; > - sensor-type = "temperature"; > + reg = <3>; > + sensor-type = "temperature"; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > index 1502b22c77cc..fde5225ce012 100644 > --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml > @@ -77,15 +77,15 @@ additionalProperties: false > examples: > - | > i2c { > - #address-cells = <1>; > - #size-cells = <0>; > - > - tmp513@5c { > - compatible = "ti,tmp513"; > - reg = <0x5C>; > - shunt-resistor-micro-ohms = <330000>; > - ti,bus-range-microvolt = <32000000>; > - ti,pga-gain = <8>; > - ti,nfactor = <0x1 0xF3 0x00>; > - }; > + #address-cells = <1>; > + #size-cells = <0>; > + > + tmp513@5c { > + compatible = "ti,tmp513"; > + reg = <0x5c>; > + shunt-resistor-micro-ohms = <330000>; > + ti,bus-range-microvolt = <32000000>; > + ti,pga-gain = <8>; > + ti,nfactor = <0x1 0xf3 0x00>; > + }; > }; > diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml > index 3bc8e73dfbf0..bce68a326919 100644 > --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml > +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml > @@ -40,12 +40,12 @@ additionalProperties: false > examples: > - | > i2c { > - #address-cells = <1>; > - #size-cells = <0>; > - > - tps23861@30 { > - compatible = "ti,tps23861"; > - reg = <0x30>; > - shunt-resistor-micro-ohms = <255000>; > - }; > + #address-cells = <1>; > + #size-cells = <0>; > + > + tps23861@30 { > + compatible = "ti,tps23861"; > + reg = <0x30>; > + shunt-resistor-micro-ohms = <255000>; > + }; > };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml index d794deb08bb7..ca2b47320689 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml @@ -52,16 +52,16 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; pwmon@5a { - compatible = "adi,adm1177"; - reg = <0x5a>; - shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ - adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ - adi,vrange-high-enable; + compatible = "adi,adm1177"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ + adi,vrange-high-enable; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml index 43b4f4f57b49..4f8e11bd5142 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml @@ -39,13 +39,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; adm1266@40 { - compatible = "adi,adm1266"; - reg = <0x40>; + compatible = "adi,adm1266"; + reg = <0x40>; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml index f2f99afb3a3b..0cf3ed6212a6 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml @@ -49,15 +49,15 @@ additionalProperties: false examples: - | fpga_axi: fpga-axi { - #address-cells = <0x2>; - #size-cells = <0x1>; - - axi_fan_control: axi-fan-control@80000000 { - compatible = "adi,axi-fan-control-1.00.a"; - reg = <0x0 0x80000000 0x10000>; - clocks = <&clk 71>; - interrupts = <0 110 0>; - pulses-per-revolution = <2>; - }; + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index bf04151b63d2..152935334c76 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -87,15 +87,15 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - - ltc2947_spi: ltc2947@0 { - compatible = "adi,ltc2947"; - reg = <0>; - /* accumulation takes place always for energ1/charge1. */ - /* accumulation only on positive current for energy2/charge2. */ - adi,accumulator-ctl-pol = <0 1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + ltc2947_spi: ltc2947@0 { + compatible = "adi,ltc2947"; + reg = <0>; + /* accumulation takes place always for energ1/charge1. */ + /* accumulation only on positive current for energy2/charge2. */ + adi,accumulator-ctl-pol = <0 1>; + }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml index ec984248219e..dba74f400bc2 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml @@ -55,26 +55,26 @@ additionalProperties: false examples: - | - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; ltc2992@6f { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - compatible = "adi,ltc2992"; - reg = <0x6f>; + compatible = "adi,ltc2992"; + reg = <0x6f>; - channel@0 { - reg = <0x0>; - shunt-resistor-micro-ohms = <10000>; - }; + channel@0 { + reg = <0x0>; + shunt-resistor-micro-ohms = <10000>; + }; - channel@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <10000>; - }; + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml index 7598b083979c..353d81d89bf5 100644 --- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml +++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml @@ -41,13 +41,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; sbrmi@3c { - compatible = "amd,sbrmi"; - reg = <0x3c>; + compatible = "amd,sbrmi"; + reg = <0x3c>; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml index 446b09f1ce94..75088244a274 100644 --- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml +++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml @@ -42,13 +42,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; sbtsi@4c { - compatible = "amd,sbtsi"; - reg = <0x4c>; + compatible = "amd,sbtsi"; + reg = <0x4c>; }; }; ... diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml index e1ccbd30e0eb..c54b5986b365 100644 --- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -31,7 +31,7 @@ additionalProperties: false examples: - | - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 1>, <&adc 2>; - }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 1>, <&adc 2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index e1719839faf0..7b9d48d6d6da 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -198,30 +198,30 @@ examples: }; - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - sensor@4c { - compatible = "adi,adt7481"; - reg = <0x4c>; #address-cells = <1>; #size-cells = <0>; - channel@0 { - reg = <0x0>; - label = "local"; - }; - - channel@1 { - reg = <0x1>; - label = "front"; - temperature-offset-millicelsius = <4000>; - }; - - channel@2 { - reg = <0x2>; - label = "back"; - temperature-offset-millicelsius = <750>; + sensor@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + label = "front"; + temperature-offset-millicelsius = <4000>; + }; + + channel@2 { + reg = <0x2>; + label = "back"; + temperature-offset-millicelsius = <750>; + }; }; - }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml index 6a1920712fb9..3d0146e20d3e 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml @@ -131,7 +131,7 @@ additionalProperties: false examples: - | - thermistor0 { + thermistor { compatible = "murata,ncp18wb473"; io-channels = <&gpadc 0x06>; pullup-uv = <1800000>; diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml index 2f0620ecccc9..cd8dcd797031 100644 --- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml @@ -123,23 +123,23 @@ examples: #size-cells = <0>; channel@0 { /* LTD */ - reg = <0>; + reg = <0>; }; channel@1 { /* RTD1 */ - reg = <1>; - sensor-type = "voltage"; + reg = <1>; + sensor-type = "voltage"; }; channel@2 { /* RTD2 */ - reg = <2>; - sensor-type = "temperature"; - temperature-mode = "thermal-diode"; + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermal-diode"; }; channel@3 { /* RTD3 */ - reg = <3>; - sensor-type = "temperature"; + reg = <3>; + sensor-type = "temperature"; }; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 1502b22c77cc..fde5225ce012 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -77,15 +77,15 @@ additionalProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - tmp513@5c { - compatible = "ti,tmp513"; - reg = <0x5C>; - shunt-resistor-micro-ohms = <330000>; - ti,bus-range-microvolt = <32000000>; - ti,pga-gain = <8>; - ti,nfactor = <0x1 0xF3 0x00>; - }; + #address-cells = <1>; + #size-cells = <0>; + + tmp513@5c { + compatible = "ti,tmp513"; + reg = <0x5c>; + shunt-resistor-micro-ohms = <330000>; + ti,bus-range-microvolt = <32000000>; + ti,pga-gain = <8>; + ti,nfactor = <0x1 0xf3 0x00>; + }; }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index 3bc8e73dfbf0..bce68a326919 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -40,12 +40,12 @@ additionalProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - tps23861@30 { - compatible = "ti,tps23861"; - reg = <0x30>; - shunt-resistor-micro-ohms = <255000>; - }; + #address-cells = <1>; + #size-cells = <0>; + + tps23861@30 { + compatible = "ti,tps23861"; + reg = <0x30>; + shunt-resistor-micro-ohms = <255000>; + }; };