@@ -623,6 +623,11 @@ static void __init i8k_init_procfs(struct device *dev)
{
struct dell_smm_data *data = dev_get_drvdata(dev);
+ strscpy(data->bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
+ sizeof(data->bios_version));
+ strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
+ sizeof(data->bios_machineid));
+
/* Only register exit function if creation was successful */
if (proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data))
devm_add_action_or_reset(dev, i8k_exit_procfs, NULL);
@@ -1078,6 +1083,26 @@ static int __init dell_smm_init_hwmon(struct device *dev)
return PTR_ERR_OR_ZERO(dell_smm_hwmon_dev);
}
+static int __init dell_smm_init_data(struct device *dev, const struct dell_smm_ops *ops)
+{
+ struct dell_smm_data *data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ mutex_init(&data->i8k_mutex);
+ dev_set_drvdata(dev, data);
+
+ data->ops = ops;
+ /* All options must not be 0 */
+ data->i8k_fan_mult = fan_mult ? : I8K_FAN_MULT;
+ data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH;
+ data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max);
+
+ return 0;
+}
+
static const struct dmi_system_id i8k_dmi_table[] __initconst = {
{
.ident = "Dell G5 5590",
@@ -1386,26 +1411,11 @@ static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = {
static int __init dell_smm_probe(struct platform_device *pdev)
{
- struct dell_smm_data *data;
int ret;
- data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- mutex_init(&data->i8k_mutex);
- platform_set_drvdata(pdev, data);
- data->ops = &i8k_smm_ops;
-
- strscpy(data->bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION),
- sizeof(data->bios_version));
- strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL),
- sizeof(data->bios_machineid));
-
- /* All options must not be 0 */
- data->i8k_fan_mult = fan_mult ? : I8K_FAN_MULT;
- data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH;
- data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max);
+ ret = dell_smm_init_data(&pdev->dev, &i8k_smm_ops);
+ if (ret < 0)
+ return ret;
ret = dell_smm_init_hwmon(&pdev->dev);
if (ret)
In the future, multiple SMM calling backends will exist, with each backend being required to initialize its data. Introduce a helper function for this so the code necessary to initialize dell_smm_data is not duplicated between different backends. Signed-off-by: Armin Wolf <W_Armin@gmx.de> --- drivers/hwmon/dell-smm-hwmon.c | 46 +++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 18 deletions(-) -- 2.39.2