[v2] dt-bindings: hwmon: adc128d818: convert to dtschema

Commit Message

Javier Carrasco March 19, 2024, 10 a.m. UTC

Convert adc128d818 bindings to dtschema to support validation.

Reviewed-by: Krzysztof Kozlowski <[e-mail]>
Signed-off-by: Javier Carrasco <[e-mail]>
---
Changes in v2:
- Add missing '|' to mark beginning of literal block in ti,mode
  description.
- Link to v1: https://lore.kernel.org/r/[e-mail]
---
 .../devicetree/bindings/hwmon/adc128d818.txt       | 38 -------------
 .../devicetree/bindings/hwmon/ti,adc128d818.yaml   | 63 ++++++++++++++++++++++
 2 files changed, 63 insertions(+), 38 deletions(-)


---
base-commit: bf3a69c6861ff4dc7892d895c87074af7bc1c400
change-id: 20240318-adc128d818_dtschema-02b78fc26f65

Best regards,

Comments

Guenter Roeck March 20, 2024, 5:55 p.m. UTC | #1

On Tue, Mar 19, 2024 at 11:00:10AM +0100, Javier Carrasco wrote:
> Convert adc128d818 bindings to dtschema to support validation.
> 
> Reviewed-by: Krzysztof Kozlowski <[e-mail]>
> Signed-off-by: Javier Carrasco <[e-mail]>

Applied.

Please note that I'll push the branch after the commit window closed.

Thanks,
Guenter

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7bac3..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@ 
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0:  7 single-ended voltage readings (IN0-IN6),
-            1 temperature reading (internal)
- - Mode 1:  8 single-ended voltage readings (IN0-IN7),
-            no temperature
- - Mode 2:  4 pseudo-differential voltage readings
-              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
- - Mode 3:  4 single-ended voltage readings (IN0-IN3),
-            2 pseudo-differential voltage readings
-              (IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible:  must be set to "ti,adc128d818"
- - reg:         I2C address of the device
-
-Optional node properties:
-
- - ti,mode:     Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
-	adc128d818@1d {
-		compatible = "ti,adc128d818";
-		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 000000000000..a32035409cee
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,63 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+  - Javier Carrasco <[e-mail]>
+
+description: |
+  The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+  with a temperature sensor and an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADC128D818
+
+properties:
+  compatible:
+    const: ti,adc128d818
+
+  reg:
+    maxItems: 1
+
+  ti,mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Operation mode.
+      Mode 0  - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+      reading (internal).
+      Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+      Mode 2 - 4 pseudo-differential voltage readings
+      (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+      Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+      voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+    default: 0
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exist, the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "ti,adc128d818";
+            reg = <0x1d>;
+            vref-supply = <&vref>;
+            ti,mode = /bits/ 8 <2>;
+        };
+    };